-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Now that I've been unable to register 2 hardware SIP phones and one software (Kphone), I'm beginning to doubt that chan_sip works at all. - -- Regards, Tais M. Hansen ComX Networks Tel: +45-70257474 Fax: +45-70257374 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/cXDg2TEAILET3McRAlWgAJ4/2Y21JU5VkfrO2CMLAMAfOdiszACgk/Yf lCKOXryUGv1nQOevTry+rqc=pJJR -----END PGP SIGNATURE-----
Tais M. Hansen schrieb:>... >Now that I've been unable to register 2 hardware SIP phones and one software >(Kphone), I'm beginning to doubt that chan_sip works at all. > >... >Hi, we have 2 snom phones running with sip. (Asterisk-0.5.0). The sip part seems to be very stable. We have currently some problems with chan_modem (i4l). We are going to replace the isdn card by a avm one in order to use chan_capi. According to a lot of reports within this mailing list, we'll get rid of our remaining asterisk problems doing this. But chan_sip is very reliable in our environment. Roger.
*This message was transferred with a trial version of CommuniGate(tm) Pro* SIP Works fine. I use it every day. Check your config. What errors are you getting when you endpoints try to register? Also, go through the mailing list archives as there are sample configs in there somewhere. J> -----Original Message----- > From: Tais M. Hansen [mailto:th@comx.as] > Sent: Wednesday, 24 September 2003 8:25 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Does SIP work? > > > *This message was transferred with a trial version of > CommuniGate(tm) Pro* > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi, > > Now that I've been unable to register 2 hardware SIP phones > and one software > (Kphone), I'm beginning to doubt that chan_sip works at all. > > - -- > Regards, > Tais M. Hansen > ComX Networks > Tel: +45-70257474 > Fax: +45-70257374 > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.2 (GNU/Linux) > > iD8DBQE/cXDg2TEAILET3McRAlWgAJ4/2Y21JU5VkfrO2CMLAMAfOdiszACgk/Yf > lCKOXryUGv1nQOevTry+rqc> =pJJR > -----END PGP SIGNATURE----- > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >
> Now that I've been unable to register 2 hardware SIP phones and one > software (Kphone), I'm beginning to doubt that chan_sip works at all.I use SIP to talk to Grandstream 100s every day, and also to the FWD network without issue. Are you trying to access SIP across NAT or other restrictive firewall or something? Regards, Andrew
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wednesday 24 September 2003 13:42, Jamie Carl wrote:> SIP Works fine. I use it every day. > Check your config. What errors are you getting when you endpoints try > to register?401 Unauthorized> Also, go through the mailing list archives as there are sample configs > in there somewhere.I did, but none of the examples nor where the default config clear on the fact that the "[xxx]" HAD to match "sip:xxx@....". Once that was cleared up, it started working for me too. - -- Regards, Tais M. Hansen ComX Networks Tel: +45-70257474 Fax: +45-70257374 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/cZPH2TEAILET3McRArZKAJ4hgOIagGS/2FFinHsC395/OIXDUwCfSjNl 757RlrzQtj/tdSqj3FdTJoc=wWg+ -----END PGP SIGNATURE-----