asterisk users - Aug 2003 - Chan_h323 and a Cisco Gateway

Hi,

Can anyone tell me what should be included in h323.conf to get asterisk to
talk to a Cisco 2600 gateway?  Any statement examples for extensions.conf
would also be appreciated.  Thanks.

Will chan_h323 use the Cisco as a gateway anyway?


Regards,

Steven Thomas

Well depends.. what kind of problem are you having?

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080093f62.shtml

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_problem_troubleshooting09186a00800c5e33.shtml

Check those... I suspect one of those has nailed ya.

If you have PRI and you try to terminate outbound via chan_h323 you must
have "bearer-cap speech" on your voice-ports.  Because chan_h323
isn't
sending the appropriate bearer cap in the H.225 SETUP message.

Hours of beating head on desk and searching... Hope this helps.

Thanks,
Brian


On Tue, 26 Aug 2003, Steven Thomas wrote:
>
>
>
>
> Hi,
>
> Can anyone tell me what should be included in h323.conf to get asterisk to
> talk to a Cisco 2600 gateway?  Any statement examples for extensions.conf
> would also be appreciated.  Thanks.
>
> Will chan_h323 use the Cisco as a gateway anyway?
>
>
> Regards,
>
> Steven Thomas
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

Hi,

Anyone knows where to look to get rid of the following message:

WARNING[571403]: File format_pcm_alaw.c, Line 213 (ast_read_callback):
Failed to write frame

Probably one of my voice prompts is corrupted, but they are all playing
ok.

Thanks for any answer!

Ivar.