Anyone having problems getting transfer to work here is the answer...
It appears the manual is incorrect..
The manual says:
1)Press "Transfer" button.
2)Dial the target extension.
3)Hangup the phone.
This will disconnect the call.. Here is how it can be done..
Matteo gave this solution.. (thanks)
NOTE:'Use # as Dial Key:' must be set to YES
To trasnfer:
1)Press "Transfer" button.
2)Dial the target extension.
3)Press "#" key.
The call is transfered and you can hangup.
If you are like me and have extensions that use the "#" in your
dilaplan this will cause problems so then you can do the following..
NOTE:'Use # as Dial Key:' must be set to NO
To Transfer:
1)Press "Transfer" button.
2)Dial Target extension.
3)Press "Redial" button.
The call is transfered and you can hangup.
Hope that helps someone..
Thanks again to Matteo..
Later..
> For me works, providing that:
>
> * 'Use # as Dial Key:' must be set to yes
>
> And to trasnfer you do the following:
> receive a call
> press trasnfer
> dial the exten + #
>
> the call is trasnferred now.
>
> if you simply dial the exten + hangup as stated in the manual,
> that doesn't work (also if 'Use # as Dial Key:' is set to no)
>
> Matteo.
>
>
> Il mar, 2003-07-15 alle 10:46, WipeOut . ha scritto:
> > Yes, The External NTP issue has been around for a while now.. I was
hoping it would be fixed in this release..
> >
> > Also the ability transfer a call using the "Transfer" button
is still broken.. (Unless it requires some special configuration to make it work
with *)... Anyone know??
> >
> > These problems are not listed in the "Known Problems"
section of the release notes for .77 release..
> >
> >
> >
> > > Hi
> > >
> > > I upgraded earlier today and so far have found that if the
Daylight Saving
> > > option is on one hour is added to the time received from the NTP
server
> > > regardless of date.
> > >
> > > This is using my internal NTP server but I can't get it to
work with any
> > > external NTP server, it simply does not download the date
> > >
> > > Other than this I have seen no change since I upgraded.
> > >
> > > Although there appears to be no Release notes with this release
> > >
> > > Regards
> > > Paul
> > >
> > > -----Original Message-----
> > > From: asterisk-users-admin@lists.digium.com
> > > [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of
Brancaleoni
> > > Matteo
> > > Sent: 14 July 2003 20:42
> > > To: asterisk-users@lists.digium.com
> > > Subject: [Asterisk-Users] New budgetone firmware
> > >
> > >
> > > Hi.
> > > Has anyone experienced with the new firmware .77 ?
> > > There's Day Light Saving time now, but haven't
> > > time to play with it, till now.
> > >
> > > Matteo.
> > >
> > > --
> > > Matteo Brancaleoni
> > > Espia System Administrator - IT services
> > > Website : http://www.espia.it
> > > Email : mbrancaleoni@espia.it
> > >
> > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users@lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users@lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr
Powered by Outblaze