asterisk users - Jul 2003 - Debug PRI!

This indicate that the connection with  the local provider PTSN it is ok? :

   -- Attempting call on Zap/10 for s@inbound:1 (Retry 2)
-- Making new call for cr 32781
 > Protocol Discriminator: Q.931 (8)  len=28
 > Call Ref: len= 2 (reference 13/0xD) (Originator)
 > Message type: SETUP (5)
 > Bearer Capability (len= 3) [ Ext: 1  Q.931 Std: 0  Info transfer 
capability: Speech (0)
 >                              Ext: 1  Trans mode/rate: 64kbps, 
circuit-mode (16)
 >                              Ext: 1  User information layer 1: A-Law (35)
 > Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, 
Exclusive Dchan: 0
 >                        ChanSel: Reserved
 >                       Ext: 1  Coding: 0   Number Specified   Channel 
Type: 3
 >                       Ext: 1  Channel: 10 ]
 > Display (len= 1) [ 1 ]
 > Calling Number (len= 4) [ Ext: 0  TON: Unknown Number Type (0)  NPI: 
Unknown Number Plan (0)
 >                           Presentation: Unknown (67) '' ]
 > Called Number (len= 5) [ Ext: 1  TON: National Number (2)  NPI: 
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '10' ]
 > Sending Complete (len= 0)
< Protocol Discriminator: Q.931 (8)  len=9
< Call Ref: len= 2 (reference 32781/0x800D) (Terminator)
< Message type: RELEASE COMPLETE (90)
< Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0 
Location: Public network serving the local user (2)
<                  Ext: 1  Cause: Normal, unspecified (31), class = 
Normal Event (1) ]
-- Processing IE 8 (Cause)
     -- Channel 10, span 1 got hangup
     -- Hungup 'Zap/10-1'
NOTICE[28690]: File pbx_spool.c, Line 195 (attempt_thread): Call failed 
to go through, reason 1

On Tue, 2003-07-08 at 12:06, Cristi wrote:
> This indicate that the connection with  the local provider PTSN it is ok? :
> 
>  > Called Number (len= 5) [ Ext: 1  TON: National Number (2)  NPI: 
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '10' ]
This is the interesting line. Does the number your calling to get into
this system end in 10? if so it would seem you are only getting the last
2 digits of the number and need to set up an extension for 10 in the
context you are dropping the call into.
-- 
Steven Critchfield  <critch@basesys.com>