Hi, I am plying with * for 10 days now. I am testing with a couple of vocaltec h.323 gateways (FXO and PRI) cisco ata-186 (configured for SIP) and MSN messenger (SIP). They all seem to interoperate. However I have a problem when * is sending calls to the vocaltec gateways. Vocaltec gateways are monitoring the RTCP reports send from the remote gateway (in this case *) and if they don't get a report for 60 seconds they will disconnect the call (assuming internet disconnection). Because of this all my calls have duration of one minute. I can see on the console that * is detecting incoming RTCP reports so there should be some RTCP functionality in it (although I have seen a message from February saying the opposite). My question is if/how can I make * send RTCP report to the vocaltec gateways. I think any RTCP packet will do the trick as long as the vocaltec gateway gets it on a regular basis (I don't care if the information in it is correct). H. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030704/3c2d4682/attachment.htm
> I can see on the console that * is detecting incoming RTCP reports so there > should be some RTCP functionality in it (although I have seen a message from > February saying the opposite). My question is if/how can I make * send RTCP > report to the vocaltec gateways. I think any RTCP packet will do the trick > as long as the vocaltec gateway gets it on a regular basis (I don't care if > the information in it is correct).It would require some additional code, but could be done. Some of the basics are in place now but not nearly enough code, as it did not end up being required for video as we had though tit would be. Mark