Jay Banda
2003-Jun-05 00:28 UTC
[Asterisk-Users] Valiant Comms VCL 30 Channel bank + Digium E100P
Hello All. Does anyone have experience with the Valiant Comms vcl30 channel and the Digium E100P in asterisk ? We have the vcl30 channel bank, loaded with FXO interfaces. We have set up * for fxs in zaptel.conf and in zapata.conf, but are not able to get any incoming calls. The vcl fxs interfaces show that they are ringing ( incoming call from PSTN ) , but the * does not answer ( or am I missing something , I think the E100P card is supposed to indicate that there is an incoming call ?) If anyone is able to point me in a remotely correct direction, I will be eternally grateful :) Kind regards to all Jay Banda Snr Network Eng CopperNET Solutions
Martin Pycko
2003-Jun-05 07:40 UTC
[Asterisk-Users] Valiant Comms VCL 30 Channel bank + Digium E100P
Do you really have the channels in asterisk ? "zap show channels" Is the alarm on the E1 circuit ? Martin On Thu, 5 Jun 2003, Jay Banda wrote:> Hello All. > > Does anyone have experience with the Valiant Comms vcl30 channel > and the Digium E100P in asterisk ? We have the vcl30 channel bank, > loaded with FXO interfaces. We have set up * for fxs in zaptel.conf > and in zapata.conf, but are not able to get any incoming calls. > > The vcl fxs interfaces show that they are ringing ( incoming call from > PSTN ) , but the * does not answer ( or am I missing something , I think > the E100P card is supposed to indicate that there is an incoming call ?) > > If anyone is able to point me in a remotely correct direction, I will be > eternally grateful :) > > Kind regards to all > > Jay Banda > Snr Network Eng > CopperNET Solutions > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >
Joe Antkowiak
2003-Jun-05 08:54 UTC
[Asterisk-Users] Valiant Comms VCL 30 Channel bank + Digium E100P
Also, are all the fxo channels "connected" to the t1 channels on the channel bank? I believe you have to map them just like on the CAC Adits... -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Martin Pycko Sent: Thursday, June 05, 2003 10:40 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Valiant Comms VCL 30 Channel bank + Digium E100P Do you really have the channels in asterisk ? "zap show channels" Is the alarm on the E1 circuit ? Martin On Thu, 5 Jun 2003, Jay Banda wrote:> Hello All. > > Does anyone have experience with the Valiant Comms vcl30 channel > and the Digium E100P in asterisk ? We have the vcl30 channel bank, > loaded with FXO interfaces. We have set up * for fxs in zaptel.conf > and in zapata.conf, but are not able to get any incoming calls. > > The vcl fxs interfaces show that they are ringing ( incoming call from > PSTN ) , but the * does not answer ( or am I missing something , I think > the E100P card is supposed to indicate that there is an incoming call ?) > > If anyone is able to point me in a remotely correct direction, I will be > eternally grateful :) > > Kind regards to all > > Jay Banda > Snr Network Eng > CopperNET Solutions > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users
Jay Banda
2003-Jun-06 00:37 UTC
[Asterisk-Users] Re: Valiant Comms VCL 30 Channel bank + Digium E100P
Hi Martin There are no alarms on the E1 circuit, and see below the output of "zap show channels" ================================================================ *CLI> zap show channels Chan. Num. Extension Context Language MusicOnH 1 trunklocal en default 2 trunklocal en default 3 trunklocal en default 4 trunklocal en default 5 trunklocal en default 6 trunklocal en default 7 trunklocal en default 8 trunklocal en default 9 trunklocal en default 10 trunklocal en default 11 trunklocal en default 12 trunklocal en default 13 trunklocal en default 14 trunklocal en default 16 trunklocal en default 17 trunklocal en default 18 trunklocal en default 19 trunklocal en default 20 trunklocal en default 21 trunklocal en default 22 trunklocal en default 23 trunklocal en default 24 trunklocal en default 25 trunklocal en default 26 trunklocal en default 27 trunklocal en default 28 trunklocal en default 29 trunklocal en default 30 trunklocal en default 31 trunklocal en default ============================================================= Output of "ztcfg -vvv": [root@monitor asterisk]# ztcfg -vvv Zaptel Configuration ===================== SPAN 1: D4/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) Channel 05: FXS Kewlstart (Default) (Slaves: 05) Channel 06: FXS Kewlstart (Default) (Slaves: 06) Channel 07: FXS Kewlstart (Default) (Slaves: 07) Channel 08: FXS Kewlstart (Default) (Slaves: 08) Channel 09: FXS Kewlstart (Default) (Slaves: 09) Channel 10: FXS Kewlstart (Default) (Slaves: 10) Channel 11: FXS Kewlstart (Default) (Slaves: 11) Channel 12: FXS Kewlstart (Default) (Slaves: 12) Channel 13: FXS Kewlstart (Default) (Slaves: 13) Channel 14: FXS Kewlstart (Default) (Slaves: 14) Channel 15: HDLC with FCS check (Default) (Slaves: 15) Channel 16: FXS Kewlstart (Default) (Slaves: 16) Channel 17: FXS Kewlstart (Default) (Slaves: 17) Channel 18: FXS Kewlstart (Default) (Slaves: 18) Channel 19: FXS Kewlstart (Default) (Slaves: 19) Channel 20: FXS Kewlstart (Default) (Slaves: 20) Channel 21: FXS Kewlstart (Default) (Slaves: 21) Channel 22: FXS Kewlstart (Default) (Slaves: 22) Channel 23: FXS Kewlstart (Default) (Slaves: 23) Channel 24: FXS Kewlstart (Default) (Slaves: 24) Channel 25: FXS Kewlstart (Default) (Slaves: 25) Channel 26: FXS Kewlstart (Default) (Slaves: 26) Channel 27: FXS Kewlstart (Default) (Slaves: 27) Channel 28: FXS Kewlstart (Default) (Slaves: 28) Channel 29: FXS Kewlstart (Default) (Slaves: 29) Channel 30: FXS Kewlstart (Default) (Slaves: 30) Channel 31: FXS Kewlstart (Default) (Slaves: 31) 31 channels configured. =========================================================================== Kind regards Jay Date: Thu, 5 Jun 2003 09:40:28 -0500 (CDT) From: Martin Pycko <martinp@digium.com> To: "asterisk-users@lists.digium.com" <asterisk-users@lists.digium.com> Subject: Re: [Asterisk-Users] Valiant Comms VCL 30 Channel bank + Digium E100P Reply-To: asterisk-users@lists.digium.com Do you really have the channels in asterisk ? "zap show channels" Is the alarm on the E1 circuit ? Martin On Thu, 5 Jun 2003, Jay Banda wrote:> Hello All. > > Does anyone have experience with the Valiant Comms vcl30 channel > and the Digium E100P in asterisk ? We have the vcl30 channel bank, > loaded with FXO interfaces. We have set up * for fxs in zaptel.conf > and in zapata.conf, but are not able to get any incoming calls. > > The vcl fxs interfaces show that they are ringing ( incoming call from > PSTN ) , but the * does not answer ( or am I missing something , I think > the E100P card is supposed to indicate that there is an incoming call ?) > > If anyone is able to point me in a remotely correct direction, I will be > eternally grateful :) > > Kind regards to all > > Jay Banda > Snr Network Eng > CopperNET Solutions >