the problem below keeps recarrying even after i have cleared this error when i run asterisk -vvv or -c the error occurs again please help ..Warning, flexible rate not heavily tested! .................WARNING[1024]: File loader.c, Line 212 (ast_load_resource): /usr/local/lib/libh323_linux_x86_r.so.1: undefined symbol: _ZN13PASN_Sequence17PreambleDecodeXERER11PXER_Stream WARNING[1024]: File loader.c, Line 368 (load_modules): Loading module chan_oh323.so failed!
What distribution and version (of linux) are you running? -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Makerere University Sent: Wednesday, May 14, 2003 5:42 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] asterisk problem the problem below keeps recarrying even after i have cleared this error when i run asterisk -vvv or -c the error occurs again please help ..Warning, flexible rate not heavily tested! .................WARNING[1024]: File loader.c, Line 212 (ast_load_resource): /usr/local/lib/libh323_linux_x86_r.so.1: undefined symbol: _ZN13PASN_Sequence17PreambleDecodeXERER11PXER_Stream WARNING[1024]: File loader.c, Line 368 (load_modules): Loading module chan_oh323.so failed! _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users
when i run asterisk -vvv or -c the error below occurs again please help i am running linux 8.1 susse and asterisk-0.4.0 ..Warning, flexible rate not heavily tested! .................WARNING[1024]: File loader.c, Line 212 (ast_load_resource): /usr/local/lib/libh323_linux_x86_r.so.1: undefined symbol: _ZN13PASN_Sequence17PreambleDecodeXERER11PXER_Stream WARNING[1024]: File loader.c, Line 368 (load_modules): Loading module chan_oh323.so failed! _______________________________________________
Make sure you're using the same version of PWLIB/OPENH323 as is described in the H323 install doc's. I've used the latest download from www.openh323.org as of yesterday, and it seems to work just fine. Make sure you set PWLIBDIR and OPENH323DIR as well. I found that CVS of PWLIB/OPENH323 won't work with a lot of stuff, including chan_h323. -wade ---- Original Message ---- From: bkatisi@tech.mak.ac.ug To: asterisk-users@lists.digium.com, Subject: RE: [Asterisk-Users] asterisk problem Date: Mon, 19 May 2003 19:08:54 +0300>when i run asterisk -vvv or -c the error below occurs again please >help i am >running linux 8.1 susse and asterisk-0.4.0 > >..Warning, flexible rate not heavily tested! >.................WARNING[1024]: File loader.c, Line 212 >(ast_load_resource): >/usr/local/lib/libh323_linux_x86_r.so.1: undefined symbol: >_ZN13PASN_Sequence17PreambleDecodeXERER11PXER_Stream >WARNING[1024]: File loader.c, Line 368 (load_modules): Loading >module >chan_oh323.so failed! >_______________________________________________ > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users >
Hi all,
I'm using RH 7.1,and install Asterisk0.4.0 with I810 Fullduplex onboard
Sound, i get *CLI> prompt by asterisk -vvvc
my problem is when i type dial i ger following error
-- Executing Wait("OSS/dsp", "1") in new stack
-- Executing Answer("OSS/dsp", "") in new stack
<< Console call has been answered >>
-- Executing DigitTimeout("OSS/dsp", "5") in new stack
-- Set Digit Timeout to 5
-- Executing ResponseTimeout("OSS/dsp", "10") in new
stack
-- Set Response Timeout to 10
-- Executing BackGround("OSS/dsp", "demo-congrats") in
new stack
WARNING[13326]: File chan_oss.c, Line 398 (soundcard_setinput): Unable to
re-open DSP device: Device or resource busy
WARNING[13326]: File chan_oss.c, Line 557 (oss_write): Unable to set
device to input mode
WARNING[13326]: File format_gsm.c, Line 181 (ast_read_callback): Failed to
write frame
-- Playing 'demo-congrats'
== Spawn extension (local, s, 5) exited non-zero on 'OSS/dsp'
<< Hangup on console >>
My lsmod commond shows......
Module Size Used by
i810 80256 1
agpgart 23392 7 (autoclean)
i810_audio 14480 0 (autoclean)
ac97_codec 8800 0 (autoclean) [i810_audio]
soundcore 4464 2 (autoclean) [i810_audio]
autofs 11264 1 (autoclean)
8139too 16480 1 (autoclean)
ipchains 38976 0 (unused)
usb-uhci 20720 0 (unused)
usbcore 49664 1 [usb-uhci]
My /var/log/asterisk/message Shows.....
Aug 14 13:01:17 WARNING[1024]: File chan_oss.c, Line 329 (setformat):
Failed to set audio device to mono
Aug 14 13:01:17 WARNING[1024]: File chan_oss.c, Line 329 (setformat):
Failed to set audio device to mono
Aug 14 13:01:17 WARNING[1024]: File chan_oss.c, Line 970 (load_module):
XXX I don't work right with non-full duplex sound cards XXX
Aug 14 13:01:17 WARNING[6151]: File chan_oss.c, Line 228 (sound_thread):
Read error on sound device: Resource temporarily unavailable
Aug 14 13:01:18 WARNING[1024]: File chan_iax2.c, Line 4952 (set_config):
Ignoring port for now
Aug 14 13:01:28 WARNING[13326]: File chan_oss.c, Line 398
(soundcard_setinput):
Unable to re-open DSP device: Device or resource busy
Aug 14 13:01:28 WARNING[13326]: File chan_oss.c, Line 557 (oss_write):
Unable to set device to input mode
Aug 14 13:01:28 WARNING[13326]: File format_gsm.c, Line 181
(ast_read_callback): Failed to write frame
Can anybody help on this?????
Prakash
Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com
Buy The Best In BOOKS at http://www.bestsellers.indiatimes.com
Bid for for Air Tickets on Air Sahara Flights at Prices Lower Than Before. Just
log on to http://airsahara.indiatimes.com and Bid Now!
Dear All,
I am a new user of Asterisk interested in setting up a VOIP network based on
Asterisk. I have deployed a few Asterisk servers running on T400P and have
started a few weeks ago to run some LIVE traffic on one of the servers. Most
of my current traffic is via H323 to and from other carriers / customers and
I am using the H323 driver written by Jeremy of Nufone.
I have had problems with this, as it seems that as time goes, for instance
after 5 or 6 hours or sometimes 3 to 4 hours or less, the system would not
be able to take any incoming calls via H323 protocol. All the calls from my
H323 customers (they are mostly carriers sending traffic to me from other
gateways such as cisco AS5300) would be rejected and the system just would
not take the calls for some reasons. I could, however, call into the PRI
(Zap interface) and make an outbound H323 calls to other gateways of my
carriers. That is, incoming H323 calls would not work after a certain period
of operation time but outgoing H323 calls would still be possible.
I have then downloaded newer version of the Asterisk about 10 days ago, but
then my Asterisk would start to crash on me, the module would just stop
running by itself and I had to restart the Asterisk. Sometimes, it would
just stop running, but 75% of the time, I would see this error message:
Connected to Asterisk CVS-12/06/03-03:06:28 currently running on localhost
(pid = 23720)
-- Remote UNIX connection
localhost*CLI> /usr/sbin/safe_asterisk: line 6: 23720 Segmentation fault
asterisk ${ASTARGS} 1>&/dev/${TTY} </dev/${TTY}
Asterisk ended with exit status 139
Asterisk exited on signal 11.
Automatically restarting Asterisk.
Disconnected from Asterisk server
Executing last minute cleanups
[root@localhost asterisk]# /usr/sbin/safe_asterisk: line 6: 23752
Segmentation fault asterisk ${ASTARGS} 1>&/dev/${TTY}
</dev/${TTY}
Asterisk ended with exit status 139
Asterisk exited on signal 11.
Automatically restarting Asterisk.
It seems that it would start to restart by would fail, and then I had to
restart it manually. This Segmentation error happens only with new version
of Asterisk but not with older version (10 days ago), does anyone here have
any of such experience or know why this is happening? Is this because I am
running T400P instead of TE410P hardware and that the newer version of
software is not 100% compatible with the old hardware? The inbound H323
problem, however, exists for both the newer and older version of Asterisk,
and I wonder if anyone has had this experience before. Is this pertaining to
the hardware as well or is there any other reason/
Ladies and Gentlemen, any feedbacks and advices would be appreciated. Many
Thanks
Tommy Chan
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.547 / Virus Database: 340 - Release Date: 12/2/2003
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20031214/eda121a3/attachment.htm
Dear All,
I am a new user of Asterisk interested in setting up a VOIP network based on
Asterisk. I have deployed a few Asterisk servers running on T400P and have
started a few weeks ago to run some LIVE traffic on one of the servers. Most
of my current traffic is via H323 to and from other carriers / customers and
I am using the H323 driver written by Jeremy of Nufone.
I have had problems with this, as it seems that as time goes, for instance
after 5 or 6 hours or sometimes 3 to 4 hours or less, the system would not
be able to take any incoming calls via H323 protocol. All the calls from my
H323 customers (they are mostly carriers sending traffic to me from other
gateways such as cisco AS5300) would be rejected and the system just would
not take the calls for some reasons. I could, however, call into the PRI
(Zap interface) and make an outbound H323 calls to other gateways of my
carriers. That is, incoming H323 calls would not work after a certain period
of operation time but outgoing H323 calls would still be possible.
I tried running the asterisk -vvvgcd in some cases in order to capture any
possible error messages and I was fortunate to be looking at it when it
started to fail once and have received twice this message on the screen:
ThreadID=0x001d4c25 assert.cxx(105) PWLib Assertion fail: Operating System
error, file tlibthrd.cxx, Line 644 Error=24
I have got this twice, one about 10 seconds after the other, and then I
tried calling into the system via H323 and it wouldn't take my calls. Ladies
and gentlemen, do you have any idea what it is and how can I get rid of
this problem because it is doing it every like 2 to 6 hours and is killing
me.
I have then downloaded newer version of the Asterisk about 10 days ago, but
then my Asterisk would start to crash on me, the module would just stop
running by itself and I had to restart the Asterisk. Sometimes, it would
just stop running, but 75% of the time, I would see this error message:
Connected to Asterisk CVS-12/06/03-03:06:28 currently running on localhost
(pid = 23720)
-- Remote UNIX connection
localhost*CLI> /usr/sbin/safe_asterisk: line 6: 23720 Segmentation fault
asterisk ${ASTARGS} 1>&/dev/${TTY} </dev/${TTY}
Asterisk ended with exit status 139
Asterisk exited on signal 11.
Automatically restarting Asterisk.
Disconnected from Asterisk server
Executing last minute cleanups
[root@localhost asterisk]# /usr/sbin/safe_asterisk: line 6: 23752
Segmentation fault asterisk ${ASTARGS} 1>&/dev/${TTY}
</dev/${TTY}
Asterisk ended with exit status 139
Asterisk exited on signal 11.
Automatically restarting Asterisk.
It seems that it would try to restart but would fail, and then I had to
restart it manually. This Segmentation error happens only with new version
of Asterisk but not with older version (10 days ago), does anyone here have
any of such experience or know why this is happening? Is this because I am
running T400P instead of TE410P hardware and that the newer version of
software is not 100% compatible with the old hardware? The inbound H323
problem, however, exists for both the newer and older version of Asterisk,
and I wonder if anyone has had this experience before. Is this pertaining to
the hardware as well or is there any other reason/
Ladies and Gentlemen, any feedbacks and advices would be appreciated. Many
Thanks
Tommy Chan
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.547 / Virus Database: 340 - Release Date: 12/2/2003
-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 3740 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20031217/abbb00a0/winmail.bin