Hi All... If I have more than 1 X100P card, how do I configure them so I know which one is which?
You configure them as usual zaptel.conf fxoks=1-n #(n - how many cards you have) Then you can just plug a single phone line to each of them and then in zttool which one will go into OK from RED state. regards Martin On Thu, 3 Apr 2003, Jim Archer wrote:> Hi All... > > If I have more than 1 X100P card, how do I configure them so I know which > one is which? > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >
Thanks Martin, but I had no luck. It seems that * des not know there is a
second X100P card in the machine. Do I need to tell the drivers somehow?
*CLI> show channels
Channel (Context Extension Pri ) State Appl. Data
0 active channel(s)
--On Thursday, April 03, 2003 9:14 AM -0600 Martin Pycko
<martinp@digium.com> wrote:
> You configure them as usual
>
> zaptel.conf
> fxoks=1-n #(n - how many cards you have)
>
> Then you can just plug a single phone line to each of them
> and then in zttool which one will go into OK from RED state.
>
> regards
> Martin
>
> On Thu, 3 Apr 2003, Jim Archer wrote:
>
>> Hi All...
>>
>> If I have more than 1 X100P card, how do I configure them so I know
which
>> one is which?
well you have to configure zaptel.conf as well. Also to see the zap channels you should use "zap show channels" Martin On Thu, 10 Apr 2003, Jim Archer wrote:> Thanks Martin, but I had no luck. It seems that * des not know there is a > second X100P card in the machine. Do I need to tell the drivers somehow? > > > *CLI> show channels > Channel (Context Extension Pri ) State Appl. Data > > 0 active channel(s) > > > > --On Thursday, April 03, 2003 9:14 AM -0600 Martin Pycko > <martinp@digium.com> wrote: > > > You configure them as usual > > > > zaptel.conf > > fxoks=1-n #(n - how many cards you have) > > > > Then you can just plug a single phone line to each of them > > and then in zttool which one will go into OK from RED state. > > > > regards > > Martin > > > > On Thu, 3 Apr 2003, Jim Archer wrote: > > > >> Hi All... > >> > >> If I have more than 1 X100P card, how do I configure them so I know which > >> one is which? > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >
Yup, I did. Here is the entry from zaptel.comf: group => 1 fxsks=1-2 fxoks=3 Here is the output from zap show channels: *CLI> zap show channels Chan. Num. Extension Context Language MusicOnH 1 default en Any ideas? --On Thursday, April 10, 2003 11:13 AM -0500 Martin Pycko <martinp@digium.com> wrote:> well you have to configure zaptel.conf as well. > Also to see the zap channels you should use "zap show channels" > > Martin > > On Thu, 10 Apr 2003, Jim Archer wrote: > >> Thanks Martin, but I had no luck. It seems that * des not know there is >> a second X100P card in the machine. Do I need to tell the drivers >> somehow? >> >> >> *CLI> show channels >> Channel (Context Extension Pri ) State Appl. >> Data >> >> 0 active channel(s) >> >> >> >> --On Thursday, April 03, 2003 9:14 AM -0600 Martin Pycko >> <martinp@digium.com> wrote: >> >> > You configure them as usual >> > >> > zaptel.conf >> > fxoks=1-n #(n - how many cards you have) >> > >> > Then you can just plug a single phone line to each of them >> > and then in zttool which one will go into OK from RED state. >> > >> > regards >> > Martin >> > >> > On Thu, 3 Apr 2003, Jim Archer wrote: >> > >> >> Hi All... >> >> >> >> If I have more than 1 X100P card, how do I configure them so I know >> >> which one is which? >> >> >> _______________________________________________ >> Asterisk-Users mailing list >> Asterisk-Users@lists.digium.com >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users
I meant zapata.conf Martin On Thu, 10 Apr 2003, Jim Archer wrote:> Yup, I did. Here is the entry from zaptel.comf: > > group => 1 > > fxsks=1-2 > fxoks=3 > > > Here is the output from zap show channels: > > *CLI> zap show channels > Chan. Num. Extension Context Language MusicOnH > 1 default en > > > Any ideas? > > --On Thursday, April 10, 2003 11:13 AM -0500 Martin Pycko > <martinp@digium.com> wrote: > > > well you have to configure zaptel.conf as well. > > Also to see the zap channels you should use "zap show channels" > > > > Martin > > > > On Thu, 10 Apr 2003, Jim Archer wrote: > > > >> Thanks Martin, but I had no luck. It seems that * des not know there is > >> a second X100P card in the machine. Do I need to tell the drivers > >> somehow? > >> > >> > >> *CLI> show channels > >> Channel (Context Extension Pri ) State Appl. > >> Data > >> > >> 0 active channel(s) > >> > >> > >> > >> --On Thursday, April 03, 2003 9:14 AM -0600 Martin Pycko > >> <martinp@digium.com> wrote: > >> > >> > You configure them as usual > >> > > >> > zaptel.conf > >> > fxoks=1-n #(n - how many cards you have) > >> > > >> > Then you can just plug a single phone line to each of them > >> > and then in zttool which one will go into OK from RED state. > >> > > >> > regards > >> > Martin > >> > > >> > On Thu, 3 Apr 2003, Jim Archer wrote: > >> > > >> >> Hi All... > >> >> > >> >> If I have more than 1 X100P card, how do I configure them so I know > >> >> which one is which? > >> > >> > >> _______________________________________________ > >> Asterisk-Users mailing list > >> Asterisk-Users@lists.digium.com > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >