thr3ads.net - freebsd stable - IA64 7.2-RC2 in HP Integrity Virtual Machine [Apr 2009]

If this information is useful, please help other people find it:
Share via:

Zahemszky Gabor

2009-Apr-29 07:05 UTC

IA64 7.2-RC2 in HP Integrity Virtual Machine

Hi! 

I've tried to install the new 7.2-RC2 FreeBSD version, on a HP-UX IVM (*) 
guest virtual machine.
But I couldn't install it. With verbose boot, the only one I can get is: 

..... (other devices)
lo0: bpf attached
Waiting 5 seconds for SCSI devices to settle
(xpt0:mpt0:0:-1:-1): reset bus 

fatal kernel trap (cpu 0): 

    trap vector = 0x14 (Page Not Present)
    cr.iip      = 0xe000000004a1dba0
    cr.ipsr     = 0x1010080a2010 (mfl,ic,dt,dfh,rt,cpl=0,it,ri=0,bn)
    cr.isr      = 0x80400000000 (code=0,vector=0,r,ei=0,ed)
    cr.ifa      = 0x1
    curthread   = 0xe000000004c1fa40
        pid = 0, comm = swapper 

[thread pid 0 tid 0 ]
Stopped at      pmap_switch+0x120:      [M0]    ld4 r14=[r17],0x4
db>
==== 

By the way, in the past, I tried 7.0, and 7.1 in IVM, without any success.
All of them panicked at that point. Is it possible to run Itanium-based
FreeBSD on an IVM virtual machine? And if it is, how? 

Thanks 

Gabor 

(*) HP IVM is a software virtualization, (like VmWare Workstation) running 
on Itanium based HP-UX machines, creating virtual Itanium machines (I can 
run IA64-Windows / IA64-Linux, and of course IA64-HP-UX operating systems in 
the VM-s paralelly)

Torfinn Ingolfsen

2009-Apr-29 16:33 UTC

head link

IA64 7.2-RC2 in HP Integrity Virtual Machine

On Wed, 29 Apr 2009 08:38:52 +0200
Zahemszky Gabor <gabor@zahemszky.hu> wrote:
> Hi! 
> 
> I've tried to install the new 7.2-RC2 FreeBSD version, on a HP-UX IVM
> (*) guest virtual machine.
Ok. Did you use the IA64 arch of FreeBSD?
Note that IA64 <> amd64, and IA64 <> i386.

FreeBSD/ia64 seems to be a tier-2 platform for now:
http://www.freebsd.org/platforms/ia64/

HTH
-- 
Regards,
Torfinn Ingolfsen

Zahemszky Gabor

2009-Apr-29 19:21 UTC

head link

IA64 7.2-RC2 in HP Integrity Virtual Machine

Yes, of course, I've tried the IA-64 version. Here is the whole verbose boot
output. 

Gabor < Gabor at Zahemszky dot HU >
-------------- next part --------------
Booting [/boot/kernel/kernel]...               
Entering /boot/kernel/kernel at 0xe000000004078000...
PAL Proc at 0xe0000000fff04000
SAL Proc at 0xe0000000fff00000, GP at 0xe0000000fff17000
SAL: AP wake-up vector: 0xee
Platform clock frequency 199991455 Hz
Processor ratio 13/2, Bus ratio 1/1, ITC ratio 13/2
ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0
Processor supports 21 Region ID bits
Trying VHPT size 0x400000
Putting VHPT at 0x800000
Splitting [0x634000-0x4000000]
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RC2 #0: Fri Apr 24 10:45:13 UTC 2009
    root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC
UNWIND: table added: base=e000000004000000, start=e000000004b14380,
end=e000000004b4fb28
Preloaded elf kernel "/boot/kernel/kernel" at 0xe000000005536820.
Preloaded mfs_root "/boot/mfsroot" at 0xe0000000055368f0.
CPU: Madison II (1299.94-Mhz Itanium 2)
  Origin = "GenuineIntel"  Revision = 2
  Features = 0x9<LB>
real memory  = 1060405248 (1011 MB)
Physical memory chunk(s):
0x02000000 - 0x03ffffff, 33554432 bytes (4096 pages)
0x05538000 - 0x3e06dfff, 951279616 bytes (116123 pages)
0x3effe000 - 0x3f453fff, 4546560 bytes (555 pages)
0x3f802000 - 0x3f8ebfff, 958464 bytes (117 pages)
0x3f8ee000 - 0x3f8f3fff, 24576 bytes (3 pages)
0x3f9fe000 - 0x3fd2dfff, 3342336 bytes (408 pages)
0x3fdfe000 - 0x3fe3dfff, 262144 bytes (32 pages)
0x3fe7e000 - 0x3ffbbfff, 1302528 bytes (159 pages)
avail memory = 987979776 (942 MB)
FPSWA Revision = 0x10012, Entry = 0xe00000003fd7a050
Table 'FACP' at 0xe000000000026b40
Table 'APIC' at 0xe000000000025388
	Local APIC address=0xfee00000
	Local SAPIC entry
		ProcessorId=0x0, Id=0x0, Eid=0x0
	I/O SAPIC entry
		Id=0x0, InterruptBase=0x0, Address=0xfec00000
Table 'SPCR' at 0xe000000000026c38
Table 'SPMI' at 0xe000000000026c88
Table 'CPEP' at 0xe000000000026cc8
MCA: allocated 8192 bytes for state info.
mem: <memory>
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
ACPI: RSDP @ 0x0x26d88/0x0028 (v  2   _HP_)
ACPI: XSDT @ 0x0x26d38/0x004C (v  2   _HP_     VMM  0x00000000 _HP_ 0x00000000)
ACPI: FACP @ 0x0x26b40/0x00F4 (v  3   _HP_     VMM  0x00000000 _HP_ 0x00000000)
ACPI: DSDT @ 0x0x253d0/0x172B (v  1     HP     HPVM 0x00000000 INTL 0x20060912)
ACPI: FACS @ 0x0x26b00/0x0040
ACPI: APIC @ 0x0x25388/0x0048 (v  2   _HP_     VMM  0x00000000 _HP_ 0x00000000)
ACPI: SPCR @ 0x0x26c38/0x0050 (v  2   _HP_     VMM  0x00000000 _HP_ 0x00000000)
ACPI: SPMI @ 0x0x26c88/0x0040 (v  2   _HP_     VMM  0x00000000 _HP_ 0x00000000)
ACPI: CPEP @ 0x0x26cc8/0x0034 (v  1   _HP_     VMM  0x00000000 _HP_ 0x00000000)
acpi0: <_HP_> on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
ACPI timer: 0/3263 0/5012 0/2735 0/1867 0/4374 0/2368 0/4060 0/2523 0/4798
0/2039 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xa08-0xa0b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x1000, dev=0x0030, revid=0x07
	domain=0, bus=0, slot=0, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x06 (1500 ns)
	intpin=a, irq=0
	map[10]: type I/O Port, range 32, base 0x8000, size  8, enabled
	map[14]: type Memory, range 64, base 0xa0000000, size 10, enabled
	map[1c]: type Memory, range 64, base 0xa0010000, size 16, enabled
pcib0: matched entry for 0.0.INTA
pcib0: slot 0 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x100e, revid=0x00
	domain=0, bus=0, slot=1, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0xff (63750 ns)
	intpin=a, irq=0
	map[10]: type Memory, range 64, base 0xa0020000, size 17, enabled
	map[18]: type Memory, range 64, base 0xa0040000, size 16, enabled
	map[20]: type I/O Port, range 32, base 0x8100, size  3, port disabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x7600, revid=0x01
	domain=0, bus=0, slot=3, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type I/O Port, range 32, base 0, size  2, enabled
	map[14]: type Memory, range 32, base 0, size 12, enabled
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x8000-0x80ff mem
0xa0000000-0xa00003ff,0xa0010000-0xa001ffff irq 16 at device 0.0 on pci0
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8000
mpt0: Reserved 0x400 bytes for rid 0x14 type 3 at 0xa0000000
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: MPI Version=1.2.0.0
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x8100-0x8107 mem
0xa0020000-0xa003ffff,0xa0040000-0xa004ffff irq 17 at device 1.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xa0020000
em0: failed to enable port mapping!
em0: Unable to allocate bus resource: ioport
em0: Allocation of PCI resources failed
device_attach: em0 attach returned 6
pci0: <bridge, PCI-ISA> at device 3.0 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI Host-PCI bridge> on acpi0
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pcib6: <ACPI Host-PCI bridge> on acpi0
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
pcib7: <ACPI Host-PCI bridge> on acpi0
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
procfs registered
Timecounters tick every 1.000 msec
lo0: bpf attached
Waiting 5 seconds for SCSI devices to settle
(xpt0:mpt0:0:-1:-1): reset bus

fatal kernel trap (cpu 0):

    trap vector = 0x14 (Page Not Present)
    cr.iip      = 0xe000000004a1dba0
    cr.ipsr     = 0x1010080a2010 (mfl,ic,dt,dfh,rt,cpl=0,it,ri=0,bn)
    cr.isr      = 0x80400000000 (code=0,vector=0,r,ei=0,ed)
    cr.ifa      = 0x1
    curthread   = 0xe000000004c1fa40
        pid = 0, comm = swapper

[thread pid 0 tid 0 ]
Stopped at      pmap_switch+0x120:      [M0]    ld4 r14=[r17],0x4
db>

Marcel Moolenaar

2009-Apr-30 22:07 UTC

head link

IA64 7.2-RC2 in HP Integrity Virtual Machine

[CC to ia64@freebsd.org]

On Apr 28, 2009, at 11:38 PM, Zahemszky Gabor wrote:
> Hi!
> I've tried to install the new 7.2-RC2 FreeBSD version, on a HP-UX  
> IVM (*) guest virtual machine.
> But I couldn't install it. With verbose boot, the only one I can get  
> is:
> ..... (other devices)
> lo0: bpf attached
> Waiting 5 seconds for SCSI devices to settle
> (xpt0:mpt0:0:-1:-1): reset bus
> fatal kernel trap (cpu 0):
>   trap vector = 0x14 (Page Not Present)
>   cr.iip      = 0xe000000004a1dba0
>   cr.ipsr     = 0x1010080a2010 (mfl,ic,dt,dfh,rt,cpl=0,it,ri=0,bn)
>   cr.isr      = 0x80400000000 (code=0,vector=0,r,ei=0,ed)
>   cr.ifa      = 0x1
>   curthread   = 0xe000000004c1fa40
>       pid = 0, comm = swapper
> [thread pid 0 tid 0 ]
> Stopped at      pmap_switch+0x120:      [M0]    ld4 r14=[r17],0x4
> db>
I believe there's a problem with mpt(4) that relates to
its error recovery, or lack thereof.

Can you send a backtrace so that we can confirm or de-
bunk that statement?

thanks,

-- 
Marcel Moolenaar
xcllnt@mac.com

Zahemszky Gábor

2009-May-06 15:19 UTC

head link

IA64 7.2-RC2 in HP Integrity Virtual Machine

> I believe there's a problem with mpt(4) that relates to
> its error recovery, or lack thereof.
> 
> Can you send a backtrace so that we can confirm or de-
> bunk that statement?
Hi!

here it is. (sorry for the ESC-sequences, it is the virtual machine's
EFI boot loader)

Attached.

G?bor < Gabor at Zahemszky dot HU >

-- 
#!/bin/ksh
Z='21N16I25C25E30, 40M30E33E25T15U!';
IFS=' ABCDEFGHIJKLMNOPQRSTUVWXYZ ';
set -- $Z;for i;{ [[ $i = ? ]]&&print $i&&break;
[[ $i = ??? ]]&&j=$i&&i=${i%?};
typeset -i40 i=8#$i;print -n ${i#???};
[[ "$j" = ??? ]]&&print -n "${j#??}
"&&j=;typeset +i i;};
IFS=' 0123456789 ';set -- $Z;for i;{ [[ $i = , ]]&&i=2;
[[ $i = ?? ]]||typeset -l i;j="$j $i";typeset +l i;};print
"$j"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: typescript
Type: application/octet-stream
Size: 19600 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20090506/3122c691/typescript.obj

freebsd stable - Apr 2009 - IA64 7.2-RC2 in HP Integrity Virtual Machine

IA64 7.2-RC2 in HP Integrity Virtual Machine

IA64 7.2-RC2 in HP Integrity Virtual Machine

IA64 7.2-RC2 in HP Integrity Virtual Machine

IA64 7.2-RC2 in HP Integrity Virtual Machine

IA64 7.2-RC2 in HP Integrity Virtual Machine