On Fri, Nov 14, 2008 at 09:29:01AM +0200, Oleg Kozheltsev
wrote:> Hello,
>
> yesterday I buy new motherboard INTEL DP43TF and now I can't write dvd
> disks in any format (on PATA dvd-drive). but still can read any dvd and
> cd. cd write and blank procedure for dvd-rw done well too. when I start
> write dvd by growisofs (/dev/cd0 - atapicam), in log I get:
>
> Nov 14 08:28:06 <kern.crit> gx kernel: acd0: FAILURE - RESERVE_TRACK
> ILLEGAL REQUEST asc=0x30 ascq=0x05
> Nov 14 08:28:06 <kern.crit> gx kernel: interrupt storm detected on
> "irq4:"; throttling interrupt source
> Nov 14 08:28:50 <kern.crit> gx last message repeated <many>
times
> Nov 14 08:31:07 <kern.crit> gx kernel: acd0: FAILURE - WRITE_BIG
timed out
>
> if I use burncd (/dev/acd0. with, or without atapicam in kernel), then I
> get only second string in log.
Does cdrecord works for you when writing CD-ROM or CD-RW ?
I got the same motherboard, and so far I had no problems with cd.
pooma% camcontrol devlist
<SONY DVD-ROM DDU1612 DYS3> at scbus0 target 0 lun 0
(pass0,sg0,cd0)
<Optiarc DVD RW AD-7170A 1.02> at scbus0 target 1 lun 0
(pass1,sg1,cd1)
I have no blank dvd at the hands now to verify growisofs
operations.>
> before upgrade, I had 6.3-RELEASE-p3, update to 7.0-RELEASE-p5, and
> after to 7.1-PRELEASE #5, it doesn't change anything. drive
> configuration in BIOS - too (change only SATA controller ICH10/AHCI).
> this IRQ is also used by USB and COM. turning off both in BIOS and/or
> kernel change IRQ map, but drive still not work correctly. present or
> not ACPI module - doesn't matter too. by the way, COM port I also
can't
> reach (/dev/cuad0), but without interrupt storm in log's (through APCI
What do you mean by "cannot reach" ?
> or ISA. even if USB and atapicd is turned off).
>
> someone had the same problem?... thanks for attention :)
>
>
> system info:
>
> FreeBSD gx.dnepr.net 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #3: Thu Nov
> 13 16:23:09 EET 2008 root@gx.dnepr.net:/usr/obj/usr/src/sys/KERN i386
>
> pcib3: <ACPI PCI-PCI bridge> irq 4 at device 28.3 on pci0
> pci3: <ACPI PCI bus> on pcib3
>
> atapci0: <JMicron JMB368 UDMA133 controller> port
> 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f
> irq 4 at device 0.0 on pci3
> atapci0: [ITHREAD]
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
>
> usb4: <UHCI (generic) USB controller> on uhci3
> usb4: USB revision 1.0
> uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on
usb4
> uhub4: 2 ports with 2 removable, self powered
> uhci4: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 4 at
> device 29.1 on pci0
> uhci4: [GIANT-LOCKED]
> uhci4: [ITHREAD]
>
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on
> acpi0
> sio0: type 16550A
>
> acd0: DVDR <NEC DVD RW ND-3550A/1.05> at ata2-<master or slave>
UDMA33
> cd0 at ata2 bus 0 target 1 lun 0
> cd0: <_NEC DVD_RW ND-3550A 1.05> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
>
> (if media present in boot time - interrupt storm again)
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 195 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20081122/62dc8029/attachment.pgp