I have a current RELENG_7 running on:
http://www.supermicro.com/products/system/4U/7045/SYS-7045B-TR+.cfm
with the -3+ IPMI card.
I can interact with the BIOS, etc, but no joy once we get past the loader.
Anyone have ideas?
Attached is the kernel config, and the /var/run/dmesg.boot file.
--
Larry Rosenman http://www.lerctr.org/~ler
Phone: +1 512-248-2683 E-Mail: ler@lerctr.org
US Mail: 430 Valona Loop, Round Rock, TX 78681-3893
-------------- next part --------------
#
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.475 2007/04/10 21:40:12 pjd Exp $
cpu HAMMER
ident BORG
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
#options SCHED_4BSD # 4BSD scheduler
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options NTFS # NT File System
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
options COMPAT_IA32 # Compatible with i386 binaries
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
#options STOP_NMI # Stop CPUS using NMI instead of IPI
options AUDIT
options INCLUDE_CONFIG_FILE
# Debugging for use in -current
options KDB # Enable kernel debugger support.
options KDB_TRACE # Enable kernel debugger support.
options KDB_UNATTENDED # Enable kernel debugger support.
options DDB # Support DDB.
options GDB # Support remote GDB.
options STACK
#options INVARIANTS # Enable calls of extra sanity checking
#options INVARIANT_SUPPORT # Extra sanity checks of internal structures,
required by INVARIANTS
#options WITNESS # Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
# Make an SMP-capable kernel by default
options SMP # Symmetric MultiProcessor Kernel
# Bus support.
device acpi
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
device atapicam # ATA CAM Layer
options ATA_STATIC_ID # Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
device sg # Linux SG Stuff
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Serial (COM) ports
#device sio # 8250, 16[45]50 based serial ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
# Wireless NIC cards
#device wlan # 802.11 support
#device wlan_wep # 802.11 WEP support
#device wlan_ccmp # 802.11 CCMP support
#device wlan_tkip # 802.11 TKIP support
#device wlan_amrr # 802.11 AMRR support
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device ural # Ralink Technology RT2500USB wireless NICs
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
#############
# The cpufreq(4) driver provides support for non-ACPI CPU frequency control
device cpufreq
# Direct Rendering modules for 3D acceleration.
device drm # DRM core module required by DRM drivers
device radeondrm # ATI Radeon
options HWPMC_HOOKS
device smbus # Bus support, required for smb below.
device intpm
device ichsmb
device smb
device iicbus # Bus support, required for ic/iic/iicsmb below.
device iicbb
device ic
device iic
device iicsmb # smb over i2c bridge
device crypto # core crypto support
device cryptodev # /dev/crypto for access to h/w
device rndtest # FIPS 140-2 entropy tester
device ipmi
options SCTP
options BREAK_TO_DEBUGGER
options ALT_BREAK_TO_DEBUGGER
device coretemp # Core temp (CORE procs and newer)
-------------- next part --------------
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #2: Fri Aug 8 22:41:48 CDT 2008
root@borg.lerctr.org:/usr/obj/usr/src/sys/BORG
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz (1862.02-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 4284047360 (4085 MB)
avail memory = 4113506304 (3922 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x2000-0x201f mem
0xd8000000-0xd801ffff irq 18 at device 0.0 on pci6
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:30:48:8e:9f:f3
em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x2020-0x203f mem
0xd8020000-0xd803ffff irq 19 at device 0.1 on pci6
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:30:48:8e:9f:f2
pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci10: <ACPI PCI bus> on pcib10
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0x1800-0x181f irq 17 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xd8500400-0xd85007ff irq 17
at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 63XXESB USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
umass0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on
uhub3
ums0: <Peppercon AG Multidevice, class 0/0, rev 2.00/0.01, addr 2> on
uhub3
ums0: X report 0x0022 not supported
device_attach: ums0 attach returned 6
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
0xd0000000-0xd7ffffff,0xd8200000-0xd820ffff irq 18 at device 1.0 on pci11
drm0: <ATI ES1000 RN50> on vgapci0
info: [drm] Initialized radeon 1.25.0 20060524
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel AHCI controller> port
0x18a0-0x18a7,0x1874-0x1877,0x1878-0x187f,0x1870-0x1873,0x1880-0x189f mem
0xd8500800-0xd8500bff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci1
ata7: [ITHREAD]
ichsmb0: <Intel 631xESB/6321ESB (ESB2) SMBus controller> port
0x1100-0x111f irq 19 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
Timecounters tick every 1.000 msec
ZFS filesystem version 6
ZFS storage pool version 6
acd0: DMA limited to UDMA33, controller found non-ATA66 cable
acd0: DVDR <Memorex DVD+-RAM 510L v1/MWS7> at ata0-master UDMA33
ad4: 381554MB <Seagate ST3400620AS 3.AAJ> at ata2-master SATA300
ad6: 381554MB <Seagate ST3400620AS 3.AAJ> at ata3-master SATA300
ad8: 476940MB <Seagate ST3500630AS 3.AAE> at ata4-master SATA300
ad10: 381554MB <Seagate ST3400620AS 3.AAJ> at ata5-master SATA300
ad12: 381554MB <Seagate ST3400620AS 3.AAJ> at ata6-master SATA300
ad14: 381554MB <Seagate ST3400620AS 3.AAJ> at ata7-master SATA300
ipmi0: IPMI device rev. 1, firmware rev. 1.2, version 2.0
ipmi0: Number of channels 8
ipmi0: Attached watchdog
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
cd1 at ata0 bus 0 target 0 lun 0
cd1: <Memorex DVD+-RAM 510L v1 MWS7> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <PepperC Virtual Disc 1 0.01> Removable CD-ROM SCSI-3 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
em0: link state changed to UP