thr3ads.net - freebsd stable - unsupported NVIDIA SATA controller [Sep 2008]

If this information is useful, please help other people find it:
Share via:

Joseph Olatt

2008-Sep-16 02:40 UTC

unsupported NVIDIA SATA controller

Hello,

I have the following SATA controller card on my system that appears to
be unsupported by FreeBSD 7-STABLE. Does anybody know if this card is
supported or will be supported in the near future?


none13@pci0:0:14:0:     class=0x010485 card=0x01371025 chip=0x07f810de rev=0xa2
hdr=0x00
    vendor     = 'Nvidia Corp'
    class      = mass storage
    subclass   = RAID


I have a SATA hard disk and DVD drive connedted to this controller that is not
detected
as a result.  I have Ubuntu loaded on the SATA disk. 


In an attempt to see if I could get FreeBSD 7-STABLE to work, I made the
following changes to the source. But it didn't seem to work.

/*** Begin change #1 ***/
[/usr/src/sys/dev/ata]
joji@snow> diff -u ata-pci.h ata-pci.h.orig
--- ata-pci.h   2008-09-15 20:40:30.000000000 -0500
+++ ata-pci.h.orig      2008-09-15 20:37:36.000000000 -0500
@@ -242,7 +242,6 @@
 #define ATA_NFORCE_MCP65        0x044810de
 #define ATA_NFORCE_MCP67        0x056010de
 #define ATA_NFORCE_MCP73        0x056c10de
-#define ATA_NFORCE_MCP73_S1     0x07f810de
 #define ATA_NFORCE_MCP77        0x075910de
 
 #define ATA_PROMISE_ID          0x105a
/*** End change #1 ***/
                                                                                



/*** Begin change #2 ***/
[/usr/src/sys/dev/ata]
joji@snow> diff -u  ata-chipset.c ata-chipset.c.orig
--- ata-chipset.c       2008-09-15 20:47:55.000000000 -0500
+++ ata-chipset.c.orig  2008-09-15 20:40:43.000000000 -0500
@@ -3051,7 +3051,6 @@
      { ATA_NFORCE_MCP65,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP65" },
      { ATA_NFORCE_MCP67,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP67" },
      { ATA_NFORCE_MCP73,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP73" },
-     { ATA_NFORCE_MCP73_S1, 0, 0,         NV4|NVQ, ATA_SA300, "nForce
MCP73" },
      { ATA_NFORCE_MCP77,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP77" },
      { 0, 0, 0, 0, 0, 0}} ;
/*** End change #2 ***/
 


After making the above changes, I rebuilt the kernel and got the card a
driver assigned to it. But my DVD drive nor the SATA hard disk was
detected. I must admit that I did not quite understand the changes that
I made. It was just an attempt. Any insight or help will be greatly
appreciated.


atapci1@pci0:0:14:0:    class=0x010485 card=0x01371025 chip=0x07f810de rev=0xa2
hdr=0x00
    vendor     = 'Nvidia Corp'
    class      = mass storage
    subclass   = RAID



/*** Begin dmesg ***/
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #4: Mon Sep 15 20:55:34 CDT 2008
    joji@snow:/usr/obj/usr/src/sys/SNOW
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz (1799.96-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 793821184 (757 MB)
avail memory  = 764108800 (728 MB)
ACPI APIC Table: <012908 APIC1443>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fed45000, febfb000 (3) failed
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pci0: <memory, RAM> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x4f00-0x4fff at device 3.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 3.1 (no driver attached)
pci0: <memory, RAM> at device 3.2 (no driver attached)
pci0: <processor> at device 3.3 (no driver attached)
pci0: <memory, RAM> at device 3.4 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfea7f000-0xfea7ffff irq 22 at
device 4.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfea7ec00-0xfea7ecff irq
23 at device 4.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP73 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pcm0: <NVidia (Unknown) High Definition Audio Controller> mem
0xfea78000-0xfea7bfff irq 20 at device 9.0 on pci0
pcm0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci1: <ACPI PCI bus> on pcib1
wb0: <Winbond W89C840F 10/100BaseTX> port 0xec00-0xec7f mem
0xfebffc00-0xfebffc7f irq 16 at device 5.0 on pci1
miibus0: <MII bus> on wb0
amphy0: <Am79C873/DM9101 10/100 media interface> PHY 1 on miibus0
amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wb0: WARNING: using obsoleted if_watchdog interface
wb0: Ethernet address: 00:80:48:d7:53:ac
wb0: [ITHREAD]
fwohci0: <VIA Fire II (VT6306)> port 0xe880-0xe8ff mem
0xfebff000-0xfebff7ff irq 17 at device 7.0 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:10:dc:00:01:54:98:34
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 512 bytes.
fwohci0: max_rec 512 -> 2048
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:10:dc:54:98:34
fwe0: Ethernet address: 02:10:dc:54:98:34
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:10:dc:00:01:54:98:34 @ 0xfffe00000000, S400, maxrec
2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x2e470000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci1: <nVidia nForce MCP73 SATA300 controller> port
0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f mem
0xfea7c000-0xfea7dfff irq 21 at device 14.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
nfe0: <NVIDIA nForce MCP73 Networking Adapter> port 0xc880-0xc887 mem
0xfea73000-0xfea73fff,0xfea7e800-0xfea7e8ff,0xfea7e400-0xfea7e40f irq 22 at
device 15.0 on pci0
miibus1: <MII bus> on nfe0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe0: Ethernet address: 00:1d:92:89:12:da
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
vgapci0: <VGA-compatible display> mem
0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 23 at
device 16.0 on pci0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: failed to enable SpeedStep
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: failed to enable SpeedStep
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model NetMouse/NetScroll Optical, device ID 0
orm0: <ISA Option ROM> at iomem 0xce000-0xcf7ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
umass0: <vendor 0x058f USB Reader, class 0/0, rev 1.10/1.00, addr 2> on
uhub0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 305245MB <WDC WD3200AAJB-00WGA0 00.02C01> at ata0-master UDMA100
pcm0: <HDA Codec: Realtek ALC888>
pcm0: <HDA Driver Revision: 20080420_0052>
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
/*** End dmesg ***/

Gavin Atkinson

2008-Sep-16 11:14 UTC

head link

unsupported NVIDIA SATA controller

On Mon, 2008-09-15 at 19:25 -0700, Joseph Olatt wrote:> Hello,
> 
> I have the following SATA controller card on my system that appears to
> be unsupported by FreeBSD 7-STABLE. Does anybody know if this card is
> supported or will be supported in the near future?
> 
> /*** Begin change #2 ***/
> [/usr/src/sys/dev/ata]
> joji@snow> diff -u  ata-chipset.c ata-chipset.c.orig
> --- ata-chipset.c       2008-09-15 20:47:55.000000000 -0500
> +++ ata-chipset.c.orig  2008-09-15 20:40:43.000000000 -0500
> @@ -3051,7 +3051,6 @@
>       { ATA_NFORCE_MCP65,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP65" },
>       { ATA_NFORCE_MCP67,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP67" },
>       { ATA_NFORCE_MCP73,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP73" },
> -     { ATA_NFORCE_MCP73_S1, 0, 0,         NV4|NVQ, ATA_SA300, "nForce
MCP73" },
>       { ATA_NFORCE_MCP77,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP77" },
>       { 0, 0, 0, 0, 0, 0}} ;
> /*** End change #2 ***/
Before you do anything, can you get a verbose DMESG and stick it online
somewhere?  This may well help identify why the above isn't working.

Secondly, you could try changing the line you've added to be:

        { ATA_NFORCE_MCP73_S1, 0, AMDNVIDIA, NVIDIA,  ATA_SA300, "nForce
MCP73" },

although to be honest, I'm not expecting that to fix things for you.  If
it doesn't, then it looks like this chip may need special support.

Because the chip identifies itself as a RAID controller and not as a
standard IDE controller, the generic code does not attach to it either.
You could override this behaviour by removing your patch and using the
attached patch.  If nothing else, that may well get you working at
UDMA33, which is the most the "generic" ATA controller support can do.
Again, if this fails, stick a verbose dmesg online somewhere.

The real solution, of proper support for the chip, may not be possible
until either documentation is available for it, or another OS
(Linux/*BSD/OpenSolaris) support it.  Out of interest, what motherboard
is this on?

Gavin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nv73-2.diff
Type: text/x-patch
Size: 670 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20080916/34f30b98/nv73-2.bin

Andrey V. Elsukov

2008-Sep-22 04:59 UTC

head link

unsupported NVIDIA SATA controller

Joseph Olatt wrote:> Hello,
> 
> I have the following SATA controller card on my system that appears to
> be unsupported by FreeBSD 7-STABLE. Does anybody know if this card is
> supported or will be supported in the near future?
> 
> 
> none13@pci0:0:14:0:     class=0x010485 card=0x01371025 chip=0x07f810de
rev=0xa2 hdr=0x00
>     vendor     = 'Nvidia Corp'
>     class      = mass storage
>     subclass   = RAID
Do you still have this problem?
It seems that your controller is AHCI-capable.
I can make a patch if is it needed.

-- 
WBR, Andrey V. Elsukov

Andrey V. Elsukov

2008-Sep-23 05:12 UTC

head link

unsupported NVIDIA SATA controller

Joseph Olatt wrote:>>> none13@pci0:0:14:0:     class=0x010485 card=0x01371025
chip=0x07f810de rev=0xa2 hdr=0x00
>>>     vendor     = 'Nvidia Corp'
>>>     class      = mass storage
>>>     subclass   = RAID
>> Do you still have this problem?
>> It seems that your controller is AHCI-capable.
>> I can make a patch if is it needed.
> 
> Yes, I'm still have the above problem. And, yes, the controller appears
> to be ACHI-capable (at least according to Ubuntu. see [1])
> 
> I would greatly appreciate a patch if you can provide one.
> 
> regards,
> joseph
> 
> 
> [1]: http://www.eskimo.com/~joji/nvidia_sata/
Hi, Joseph.

Try attached patch.

-- 
WBR, Andrey V. Elsukov
-------------- next part --------------
Index: src/sys/dev/ata/ata-chipset.c
==================================================================RCS file:
/ncvs/src/sys/dev/ata/ata-chipset.c,v
retrieving revision 1.225
diff -u -p -r1.225 ata-chipset.c
--- src/sys/dev/ata/ata-chipset.c	15 Aug 2008 10:55:11 -0000	1.225
+++ src/sys/dev/ata/ata-chipset.c	23 Sep 2008 05:06:28 -0000
@@ -3372,7 +3372,9 @@ ata_nvidia_ident(device_t dev)
      { ATA_NFORCE_MCP61_S3, 0, 0,         NV4|NVQ, ATA_SA300, "nForce
MCP61" },
      { ATA_NFORCE_MCP65,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP65" },
      { ATA_NFORCE_MCP67,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP67" },
+     { ATA_NFORCE_MCP67_A1, 0, 0,         NVAHCI,  ATA_SA300, "nForce
MCP67" },
      { ATA_NFORCE_MCP73,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP73" },
+     { ATA_NFORCE_MCP73_A1, 0, 0,         NVAHCI,  ATA_SA300, "nForce
MCP73" },
      { ATA_NFORCE_MCP77,    0, AMDNVIDIA, NVIDIA,  ATA_UDMA6, "nForce
MCP77" },
      { 0, 0, 0, 0, 0, 0}} ;
 
@@ -3380,7 +3382,12 @@ ata_nvidia_ident(device_t dev)
 	return ENXIO;
 
     ata_set_desc(dev);
-    ctlr->chipinit = ata_nvidia_chipinit;
+
+    if (ctlr->chip->cfg2 == NVAHCI)
+	ctlr->chipinit = ata_ahci_chipinit;
+    else
+	ctlr->chipinit = ata_nvidia_chipinit;
+
     return 0;
 }
 
Index: src/sys/dev/ata/ata-pci.h
==================================================================RCS file:
/ncvs/src/sys/dev/ata/ata-pci.h,v
retrieving revision 1.89
diff -u -p -r1.89 ata-pci.h
--- src/sys/dev/ata/ata-pci.h	10 Jul 2008 21:36:53 -0000	1.89
+++ src/sys/dev/ata/ata-pci.h	23 Sep 2008 05:06:28 -0000
@@ -243,8 +243,10 @@ struct ata_connect_task {
 #define ATA_NFORCE_MCP61_S2     0x03f610de
 #define ATA_NFORCE_MCP61_S3     0x03f710de
 #define ATA_NFORCE_MCP65        0x044810de
+#define ATA_NFORCE_MCP67_A1     0x055010de
 #define ATA_NFORCE_MCP67        0x056010de
 #define ATA_NFORCE_MCP73        0x056c10de
+#define ATA_NFORCE_MCP73_A1     0x07f810de
 #define ATA_NFORCE_MCP77        0x075910de
 
 #define ATA_PROMISE_ID          0x105a
@@ -450,6 +452,7 @@ struct ata_connect_task {
 #define NVIDIA          0x0004
 #define NV4             0x0010
 #define NVQ             0x0020
+#define NVAHCI          0x0040
 #define VIACLK          0x0100
 #define VIABUG          0x0200
 #define VIABAR          0x0400

Goran Lowkrantz

2008-Sep-25 05:13 UTC

head link

unsupported NVIDIA SATA controller

Hi,

FYI, I have added your patch on an MCP67 of an ASUS M2N-VM DVI motherboard 
and it's been up for about a day, dmesg looks OK and it survived the backup 
of its managed disks. So, unless you hear more from me, it worked.

FreeBSD midgard.glz.hidden-powers.com 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE 
#1: Tue Sep 23 19:57:47 CEST 2008 
root@midgard.glz.hidden-powers.com:/usr/obj/usr/src/sys/MIDGARD  amd64

00:09.0 IDE interface [0101]: nVidia Corporation MCP67 AHCI Controller 
[10de:0550] (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82b3]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 22
        Region 0: I/O ports at c480
        Region 1: I/O ports at c400
        Region 2: I/O ports at c080
        Region 3: I/O ports at c000
        Region 4: I/O ports at bc00
        Region 5: Memory at dfcfa000 (32-bit, non-prefetchable)
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [8c] SATA HBA <?>

Cheers,
	Goran

--On Tuesday, September 23, 2008 09:11 +0400 "Andrey V. Elsukov" 
<bu7cher@yandex.ru> wrote:
> Joseph Olatt wrote:
>>>> none13@pci0:0:14:0:     class=0x010485 card=0x01371025
chip=0x07f810de
>>>> rev=0xa2 hdr=0x00 vendor     = 'Nvidia Corp'
>>>>     class      = mass storage
>>>>     subclass   = RAID
>>> Do you still have this problem?
>>> It seems that your controller is AHCI-capable.
>>> I can make a patch if is it needed.
>>
>> Yes, I'm still have the above problem. And, yes, the controller
appears
>> to be ACHI-capable (at least according to Ubuntu. see [1])
>>
>> I would greatly appreciate a patch if you can provide one.
>>
>> regards,
>> joseph
>>
>>
>> [1]: http://www.eskimo.com/~joji/nvidia_sata/
>
> Hi, Joseph.
>
> Try attached patch.
>
> --
> WBR, Andrey V. Elsukov


................................................... the future isMobile

  Goran Lowkrantz <goran.lowkrantz@ismobile.com>
  System Architect, isMobile AB
  Sandviksgatan 81, PO Box 58, S-971 03 Lule?, Sweden
  Mobile: +46(0)70-587 87 82
http://www.ismobile.com ...............................................

freebsd stable - Sep 2008 - unsupported NVIDIA SATA controller

unsupported NVIDIA SATA controller

unsupported NVIDIA SATA controller

unsupported NVIDIA SATA controller

unsupported NVIDIA SATA controller

unsupported NVIDIA SATA controller