The hardware page for this UPS has some info about what variables are supported. Here is some more info from my install. Let me know if this type of info is useful, as I can supply it for a couple other UPS's. thanks! OpenBSD 7.1 (amd64) NUT 2.8.0 https://networkupstools.org/ddl/Cyber_Power_Systems/CP1500AVRLCD.html # upsc ups2 battery.charge: 95 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 23887 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 26.9 battery.voltage.nominal: 24 device.mfr: CPS device.model: CP1500AVRLCDa device.serial: [redacted] device.type: ups driver.flag.onlinedischarge: enabled driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 0501 driver.parameter.synchronous: auto driver.parameter.vendorid: 0764 driver.version: 2.8.0 driver.version.data: CyberPower HID 0.6 driver.version.internal: 0.47 driver.version.usb: libusb-1.0.23 (API: 0x1000107) input.voltage: 117.0 input.voltage.nominal: 120 output.voltage: 117.0 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 0 ups.mfr: CPS ups.model: CP1500AVRLCDa ups.productid: 0501 ups.realpower.nominal: 900 ups.serial: [redacted] ups.status: OL CHRG ups.test.result: No test initiated ups.timer.shutdown: -60 ups.timer.start: -60 ups.vendorid: 0764 # upscmd -l ups2 Instant commands supported on UPS [ups2]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) load.on - Turn on the load immediately load.on.delay - Turn on the load with a delay (seconds) shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop - Stop a shutdown in progress test.battery.start.deep - Start a deep battery test test.battery.start.quick - Start a quick battery test test.battery.stop - Stop the battery test =fini=
stefanos at karandreas.gr
2022-Jun-04 13:38 UTC
[Nut-upsuser] Info on Cyber Power CP1500AVRLCDa
On 2022-06-03 19:56, Mike via Nut-upsuser wrote:> The hardware page for this UPS has some info about what variables are > supported. > > Here is some more info from my install. Let me know if this type of > info is useful, as I can supply it for a couple other UPS's. > > thanks! >Do you have by any chance the CyberPower CP1300EPFCLCD? I would personally be interested in the variables it supports as I am thinking of buying that model to replace an APC BX1400 and I would like to know if it supports changing battery.charge.low etc. I have also read 1-2 reviews for the specific model that mention that it loses USB connectivity when switching to battery and back which would be disastrous for NUT. Any feedback you have on that or the CyberPower model(s) would be most helpful! Stefanos