Nut upsuser - Jun 2021 - [EXTERNAL] Couple questions about the output of upsc command

>>Can you login via SSH?
>Yes.
Ok, great. Assuming you're running our 15.x.x firmware*, from the main menu,
you can access a "Devices" menu where you can then drill down and view
runtime/battery values.
You'll need to refresh the screen with the enter key to get updates, but the
same test I mentioned with the GUI would be useful now. See if the runtime and
battery values in the SSH menu track with the LCD.
>From my end:
I'll be able to run a test with a similar UPS and the SNMP driver later in
the week. Generally, we support the UPS MIB so I expect most/all off those
variables to work.

*if you're running the newer 20.0.0.2526 same test is possible, but it's
a CLI. Let me know and I'll shoot over the commands.



Thank you,
David Zomaya
Tripp Lite




________________________________
 This message is for the addressee's use only. It may contain confidential
information. If you receive this message in error, please delete it and notify
the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no
responsibility for viruses which may infect an email sent to you from Tripp Lite
and which damage your electronic systems or information. It is your
responsibility to maintain virus detection systems to prevent damage to your
electronic systems and information.

The "Output Power" and "Output Load" figures are fixed at
265W and 30% in
SSH, which differs from the figures on the LCD.

On Sun, Jun 13, 2021 at 11:28 AM David Zomaya <David_Zomaya at
tripplite.com>
wrote:
> >>Can you login via SSH?
> >Yes.
> Ok, great. Assuming you're running our 15.x.x firmware*, from the main
> menu, you can access a "Devices" menu where you can then drill
down and
> view runtime/battery values.
> You'll need to refresh the screen with the enter key to get updates,
but
> the same test I mentioned with the GUI would be useful now. See if the
> runtime and battery values in the SSH menu track with the LCD.
>
> From my end:
> I'll be able to run a test with a similar UPS and the SNMP driver later
in
> the week. Generally, we support the UPS MIB so I expect most/all off those
> variables to work.
>
> *if you're running the newer 20.0.0.2526 same test is possible, but
it's a
> CLI. Let me know and I'll shoot over the commands.
>
>
>
> Thank you,
> David Zomaya
> Tripp Lite
>
>
>
>
> ________________________________
>  This message is for the addressee's use only. It may contain
confidential
> information. If you receive this message in error, please delete it and
> notify the sender. Tripp Lite disclaims all warranties and liabilities, and
> assumes no responsibility for viruses which may infect an email sent to you
> from Tripp Lite and which damage your electronic systems or information. It
> is your responsibility to maintain virus detection systems to prevent
> damage to your electronic systems and information.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20210613/9db25f99/attachment.htm>