Alvaro Karsz
2022-Dec-19 08:35 UTC
[RESEND PATCH 0/3] virtio: vdpa: new SolidNET DPU driver
This series adds a vDPA driver for SolidNET DPU. Patch 1 adds SolidRun vendor id to pci_ids. Patch 2 adds a pci quirk needed by the DPU. Patch 3 has the driver source code. Patch 1 is prerequisite for both patch 2 and patch 3. Alvaro Karsz (3): Add SolidRun vendor id New PCI quirk for SolidRun SNET DPU. virtio: vdpa: new SolidNET DPU driver. MAINTAINERS | 4 + drivers/pci/quirks.c | 8 + drivers/vdpa/Kconfig | 10 + drivers/vdpa/Makefile | 1 + drivers/vdpa/solidrun/Makefile | 6 + drivers/vdpa/solidrun/snet_hwmon.c | 188 +++++ drivers/vdpa/solidrun/snet_main.c | 1111 ++++++++++++++++++++++++++++ drivers/vdpa/solidrun/snet_vdpa.h | 196 +++++ include/linux/pci_ids.h | 2 + 9 files changed, 1526 insertions(+) create mode 100644 drivers/vdpa/solidrun/Makefile create mode 100644 drivers/vdpa/solidrun/snet_hwmon.c create mode 100644 drivers/vdpa/solidrun/snet_main.c create mode 100644 drivers/vdpa/solidrun/snet_vdpa.h -- 2.32.0
The vendor id is used in 2 differrent source files, the SNET vdpa driver and pci quirks. Signed-off-by: Alvaro Karsz <alvaro.karsz at solid-run.com> --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b362d90eb9b..33bbe3160b4 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -3115,4 +3115,6 @@ #define PCI_VENDOR_ID_NCUBE 0x10ff +#define PCI_VENDOR_ID_SOLIDRUN 0xd063 + #endif /* _LINUX_PCI_IDS_H */ -- 2.32.0
Alvaro Karsz
2022-Dec-19 08:35 UTC
[RESEND PATCH 2/3] New PCI quirk for SolidRun SNET DPU.
The DPU advertises FLR, but it may cause the device to hang.
This only happens with revision 0x1.
Signed-off-by: Alvaro Karsz <alvaro.karsz at solid-run.com>
---
drivers/pci/quirks.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 285acc4aacc..809d03272c2 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5343,6 +5343,14 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x149c,
quirk_no_flr);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);
+/* FLR may cause the SolidRun SNET DPU (rev 0x1) to hang */
+static void quirk_no_flr_snet(struct pci_dev *dev)
+{
+ if (dev->revision == 0x1)
+ quirk_no_flr(dev);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLIDRUN, 0x1000, quirk_no_flr_snet);
+
static void quirk_no_ext_tags(struct pci_dev *pdev)
{
struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus);
--
2.32.0
This commit includes:
1) The driver to manage the controlplane over vDPA bus.
2) A HW monitor device to read health values from the DPU.
Signed-off-by: Alvaro Karsz <alvaro.karsz at solid-run.com>
--
v2:
- Auto detect the BAR used for communication.
- When waiting for the DPU to write a config, wait for 5secs
before giving up on the device.
- Return EOPNOTSUPP error code in vDPA set_vq_state callback if
the vq state is not the same as the initial one.
- Implement a vDPA reset callback.
- Wait for an ACK when sending a message to the DPU.
- Add endianness comments on 64bit read/write functions.
- Remove the get_iova_range and free vDPA callbacks.
- Usage of managed device functions to ioremap a region.
- Call pci_set_drvdata and pci_set_master before
vdpa_register_device.
- Create DMA isolation between the vDPA devices by using the
chip SR-IOV feature.
Every vDPA device gets a PCIe VF with its own DMA device.
v3:
- Validate vDPA config length while receiving the DPU's config,
not while trying to write the vDPA config to the DPU.
- Request IRQs when vDPA status is set to
VIRTIO_CONFIG_S_DRIVER_OK.
- Remove snet_reset_dev() from the PCI remove function for a VF.
v4:
- Get SolidRun vendor ID from pci_ids
v5:
- Remove "select HWMON" from Kconfig.
Usage of "depends on HWMON || HWMON=n" instead and usage of
IS_ENABLED(CONFIG_HWMON) when calling to snet hwmon functions.
snet_hwmon.c is compiled only if CONFIG_HWMON is defined.
- Remove the #include <linux/hwmon-sysfs.h> from snet_hwmon.c.
- Remove the unnecessary (long) casting from snet_hwmon_read_reg.
- Remove the "_hwmon" ending from the hwmon name.
- Usage of IS_ERR macro to check if devm_hwmon_device_register_with_info
failed.
- Replace schedule() with usleep_range() in the "hot loop" in
psnet_detect_bar.
- Remove the logging of memory allocation failures.
- Add parenthesis to arguments in SNET_* macros.
- Prefer sizeof(*variable) instead of sizeof(struct x) when allocating
memory.
v6:
- SNET_WRN -> SNET_WARN.
---
MAINTAINERS | 4 +
drivers/vdpa/Kconfig | 10 +
drivers/vdpa/Makefile | 1 +
drivers/vdpa/solidrun/Makefile | 6 +
drivers/vdpa/solidrun/snet_hwmon.c | 188 +++++
drivers/vdpa/solidrun/snet_main.c | 1111 ++++++++++++++++++++++++++++
drivers/vdpa/solidrun/snet_vdpa.h | 196 +++++
7 files changed, 1516 insertions(+)
create mode 100644 drivers/vdpa/solidrun/Makefile
create mode 100644 drivers/vdpa/solidrun/snet_hwmon.c
create mode 100644 drivers/vdpa/solidrun/snet_main.c
create mode 100644 drivers/vdpa/solidrun/snet_vdpa.h
diff --git a/MAINTAINERS b/MAINTAINERS
index a608f19da3a..7f4d9dcb760 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21955,6 +21955,10 @@ IFCVF VIRTIO DATA PATH ACCELERATOR
R: Zhu Lingshan <lingshan.zhu at intel.com>
F: drivers/vdpa/ifcvf/
+SNET DPU VIRTIO DATA PATH ACCELERATOR
+R: Alvaro Karsz <alvaro.karsz at solid-run.com>
+F: drivers/vdpa/solidrun/
+
VIRTIO BALLOON
M: "Michael S. Tsirkin" <mst at redhat.com>
M: David Hildenbrand <david at redhat.com>
diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig
index 50f45d03761..79625c7cc46 100644
--- a/drivers/vdpa/Kconfig
+++ b/drivers/vdpa/Kconfig
@@ -86,4 +86,14 @@ config ALIBABA_ENI_VDPA
VDPA driver for Alibaba ENI (Elastic Network Interface) which is built upon
virtio 0.9.5 specification.
+ config SNET_VDPA
+ tristate "SolidRun's vDPA driver for SolidNET"
+ depends on PCI_MSI && PCI_IOV && (HWMON || HWMON=n)
+ help
+ vDPA driver for SolidNET DPU.
+ With this driver, the VirtIO dataplane can be
+ offloaded to a SolidNET DPU.
+ This driver includes a HW monitor device that
+ reads health values from the DPU.
+
endif # VDPA
diff --git a/drivers/vdpa/Makefile b/drivers/vdpa/Makefile
index 15665563a7f..59396ff2a31 100644
--- a/drivers/vdpa/Makefile
+++ b/drivers/vdpa/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_IFCVF) += ifcvf/
obj-$(CONFIG_MLX5_VDPA) += mlx5/
obj-$(CONFIG_VP_VDPA) += virtio_pci/
obj-$(CONFIG_ALIBABA_ENI_VDPA) += alibaba/
+obj-$(CONFIG_SNET_VDPA) += solidrun/
diff --git a/drivers/vdpa/solidrun/Makefile b/drivers/vdpa/solidrun/Makefile
new file mode 100644
index 00000000000..c0aa3415bf7
--- /dev/null
+++ b/drivers/vdpa/solidrun/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_SNET_VDPA) += snet_vdpa.o
+snet_vdpa-$(CONFIG_SNET_VDPA) += snet_main.o
+ifdef CONFIG_HWMON
+snet_vdpa-$(CONFIG_SNET_VDPA) += snet_hwmon.o
+endif
diff --git a/drivers/vdpa/solidrun/snet_hwmon.c
b/drivers/vdpa/solidrun/snet_hwmon.c
new file mode 100644
index 00000000000..e695e36ff75
--- /dev/null
+++ b/drivers/vdpa/solidrun/snet_hwmon.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SolidRun DPU driver for control plane
+ *
+ * Copyright (C) 2022 SolidRun
+ *
+ * Author: Alvaro Karsz <alvaro.karsz at solid-run.com>
+ *
+ */
+#include <linux/hwmon.h>
+
+#include "snet_vdpa.h"
+
+/* Monitor offsets */
+#define SNET_MON_TMP0_IN_OFF 0x00
+#define SNET_MON_TMP0_MAX_OFF 0x08
+#define SNET_MON_TMP0_CRIT_OFF 0x10
+#define SNET_MON_TMP1_IN_OFF 0x18
+#define SNET_MON_TMP1_CRIT_OFF 0x20
+#define SNET_MON_CURR_IN_OFF 0x28
+#define SNET_MON_CURR_MAX_OFF 0x30
+#define SNET_MON_CURR_CRIT_OFF 0x38
+#define SNET_MON_PWR_IN_OFF 0x40
+#define SNET_MON_VOLT_IN_OFF 0x48
+#define SNET_MON_VOLT_CRIT_OFF 0x50
+#define SNET_MON_VOLT_LCRIT_OFF 0x58
+
+static void snet_hwmon_read_reg(struct psnet *psnet, u32 reg, long *out)
+{
+ *out = psnet_read64(psnet, psnet->cfg.hwmon_off + reg);
+}
+
+static umode_t snet_howmon_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ return 0444;
+}
+
+static int snet_howmon_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct psnet *psnet = dev_get_drvdata(dev);
+ int ret = 0;
+
+ switch (type) {
+ case hwmon_in:
+ switch (attr) {
+ case hwmon_in_lcrit:
+ snet_hwmon_read_reg(psnet, SNET_MON_VOLT_LCRIT_OFF, val);
+ break;
+ case hwmon_in_crit:
+ snet_hwmon_read_reg(psnet, SNET_MON_VOLT_CRIT_OFF, val);
+ break;
+ case hwmon_in_input:
+ snet_hwmon_read_reg(psnet, SNET_MON_VOLT_IN_OFF, val);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ break;
+
+ case hwmon_power:
+ switch (attr) {
+ case hwmon_power_input:
+ snet_hwmon_read_reg(psnet, SNET_MON_PWR_IN_OFF, val);
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ break;
+
+ case hwmon_curr:
+ switch (attr) {
+ case hwmon_curr_input:
+ snet_hwmon_read_reg(psnet, SNET_MON_CURR_IN_OFF, val);
+ break;
+ case hwmon_curr_max:
+ snet_hwmon_read_reg(psnet, SNET_MON_CURR_MAX_OFF, val);
+ break;
+ case hwmon_curr_crit:
+ snet_hwmon_read_reg(psnet, SNET_MON_CURR_CRIT_OFF, val);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ break;
+
+ case hwmon_temp:
+ switch (attr) {
+ case hwmon_temp_input:
+ if (channel == 0)
+ snet_hwmon_read_reg(psnet, SNET_MON_TMP0_IN_OFF, val);
+ else
+ snet_hwmon_read_reg(psnet, SNET_MON_TMP1_IN_OFF, val);
+ break;
+ case hwmon_temp_max:
+ if (channel == 0)
+ snet_hwmon_read_reg(psnet, SNET_MON_TMP0_MAX_OFF, val);
+ else
+ ret = -EOPNOTSUPP;
+ break;
+ case hwmon_temp_crit:
+ if (channel == 0)
+ snet_hwmon_read_reg(psnet, SNET_MON_TMP0_CRIT_OFF, val);
+ else
+ snet_hwmon_read_reg(psnet, SNET_MON_TMP1_CRIT_OFF, val);
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ return ret;
+}
+
+static int snet_hwmon_read_string(struct device *dev,
+ enum hwmon_sensor_types type, u32 attr,
+ int channel, const char **str)
+{
+ int ret = 0;
+
+ switch (type) {
+ case hwmon_in:
+ *str = "main_vin";
+ break;
+ case hwmon_power:
+ *str = "soc_pin";
+ break;
+ case hwmon_curr:
+ *str = "soc_iin";
+ break;
+ case hwmon_temp:
+ if (channel == 0)
+ *str = "power_stage_temp";
+ else
+ *str = "ic_junction_temp";
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ return ret;
+}
+
+static const struct hwmon_ops snet_hwmon_ops = {
+ .is_visible = snet_howmon_is_visible,
+ .read = snet_howmon_read,
+ .read_string = snet_hwmon_read_string
+};
+
+static const struct hwmon_channel_info *snet_hwmon_info[] = {
+ HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL),
+ HWMON_CHANNEL_INFO(power, HWMON_P_INPUT | HWMON_P_LABEL),
+ HWMON_CHANNEL_INFO(curr, HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_CRIT |
HWMON_C_LABEL),
+ HWMON_CHANNEL_INFO(in, HWMON_I_INPUT | HWMON_I_CRIT | HWMON_I_LCRIT |
HWMON_I_LABEL),
+ NULL
+};
+
+static const struct hwmon_chip_info snet_hwmono_info = {
+ .ops = &snet_hwmon_ops,
+ .info = snet_hwmon_info,
+};
+
+/* Create an HW monitor device */
+void psnet_create_hwmon(struct pci_dev *pdev)
+{
+ struct device *hwmon;
+ struct psnet *psnet = pci_get_drvdata(pdev);
+
+ snprintf(psnet->hwmon_name, SNET_NAME_SIZE, "snet_%s",
pci_name(pdev));
+ hwmon = devm_hwmon_device_register_with_info(&pdev->dev,
psnet->hwmon_name, psnet,
+ &snet_hwmono_info, NULL);
+ /* The monitor is not mandatory, Just alert user in case of an error */
+ if (IS_ERR(hwmon))
+ SNET_WARN(pdev, "Failed to create SNET hwmon, error %ld\n",
PTR_ERR(hwmon));
+}
diff --git a/drivers/vdpa/solidrun/snet_main.c
b/drivers/vdpa/solidrun/snet_main.c
new file mode 100644
index 00000000000..d438a89b359
--- /dev/null
+++ b/drivers/vdpa/solidrun/snet_main.c
@@ -0,0 +1,1111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SolidRun DPU driver for control plane
+ *
+ * Copyright (C) 2022 SolidRun
+ *
+ * Author: Alvaro Karsz <alvaro.karsz at solid-run.com>
+ *
+ */
+#include <linux/iopoll.h>
+
+#include "snet_vdpa.h"
+
+/* SNET DPU device ID */
+#define SNET_DEVICE_ID 0x1000
+/* SNET signature */
+#define SNET_SIGNATURE 0xD0D06363
+/* Max. config version that we can work with */
+#define SNET_CFG_VERSION 0x1
+/* Queue align */
+#define SNET_QUEUE_ALIGNMENT PAGE_SIZE
+/* Kick value to notify that new data is available */
+#define SNET_KICK_VAL 0x1
+#define SNET_CONFIG_OFF 0x0
+/* ACK timeout for a message */
+#define SNET_ACK_TIMEOUT 2000000
+/* How long we are willing to wait for a SNET device */
+#define SNET_DETECT_TIMEOUT 5000000
+/* How long should we wait for the DPU to read our config */
+#define SNET_READ_CFG_TIMEOUT 3000000
+/* Size of configs written to the DPU */
+#define SNET_GENERAL_CFG_LEN 36
+#define SNET_GENERAL_CFG_VQ_LEN 40
+
+enum snet_msg {
+ SNET_MSG_DESTROY = 1,
+};
+
+static struct snet *vdpa_to_snet(struct vdpa_device *vdpa)
+{
+ return container_of(vdpa, struct snet, vdpa);
+}
+
+static int snet_wait_for_msg_ack(struct snet *snet)
+{
+ struct pci_dev *pdev = snet->pdev;
+ int ret;
+ u32 val;
+
+ /* The DPU will clear the messages offset once messages
+ * are processed.
+ */
+ ret = readx_poll_timeout(ioread32, snet->bar +
snet->psnet->cfg.msg_off,
+ val, !val, 10, SNET_ACK_TIMEOUT);
+ if (ret)
+ SNET_WARN(pdev, "Timeout waiting for message ACK\n");
+
+ return ret;
+}
+
+/* Sends a message to the DPU.
+ * If blocking is set, the function will return once the
+ * message was processed by the DPU (or timeout).
+ */
+static int snet_send_msg(struct snet *snet, u32 msg, bool blocking)
+{
+ int ret = 0;
+
+ /* Make sure the DPU acked last message before issuing a new one */
+ ret = snet_wait_for_msg_ack(snet);
+ if (ret)
+ return ret;
+
+ /* Write the message */
+ snet_write32(snet, snet->psnet->cfg.msg_off, msg);
+
+ if (blocking)
+ ret = snet_wait_for_msg_ack(snet);
+ else /* If non-blocking, flush the write by issuing a read */
+ snet_read32(snet, snet->psnet->cfg.msg_off);
+
+ return ret;
+}
+
+static irqreturn_t snet_cfg_irq_hndlr(int irq, void *data)
+{
+ struct snet *snet = data;
+ /* Call callback if any */
+ if (snet->cb.callback)
+ return snet->cb.callback(snet->cb.private);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t snet_vq_irq_hndlr(int irq, void *data)
+{
+ struct snet_vq *vq = data;
+ /* Call callback if any */
+ if (vq->cb.callback)
+ return vq->cb.callback(vq->cb.private);
+
+ return IRQ_HANDLED;
+}
+
+static void snet_free_irqs(struct snet *snet)
+{
+ struct psnet *psnet = snet->psnet;
+ struct pci_dev *pdev;
+ u32 i;
+
+ /* Which Device allcoated the IRQs? */
+ if (PSNET_FLAG_ON(psnet, SNET_CFG_FLAG_IRQ_PF))
+ pdev = snet->pdev->physfn;
+ else
+ pdev = snet->pdev;
+
+ /* Free config's IRQ */
+ if (snet->cfg_irq != -1) {
+ devm_free_irq(&pdev->dev, snet->cfg_irq, snet);
+ snet->cfg_irq = -1;
+ }
+ /* Free VQ IRQs */
+ for (i = 0; i < snet->cfg->vq_num; i++) {
+ if (snet->vqs[i] && snet->vqs[i]->irq != -1) {
+ devm_free_irq(&pdev->dev, snet->vqs[i]->irq, snet->vqs[i]);
+ snet->vqs[i]->irq = -1;
+ }
+ }
+
+ /* IRQ vectors are freed when the pci remove callback is called */
+}
+
+static int snet_set_vq_address(struct vdpa_device *vdev, u16 idx, u64
desc_area,
+ u64 driver_area, u64 device_area)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+ /* save received parameters in vqueue sturct */
+ snet->vqs[idx]->desc_area = desc_area;
+ snet->vqs[idx]->driver_area = driver_area;
+ snet->vqs[idx]->device_area = device_area;
+
+ return 0;
+}
+
+static void snet_set_vq_num(struct vdpa_device *vdev, u16 idx, u32 num)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+ /* save num in vqueue */
+ snet->vqs[idx]->num = num;
+}
+
+static void snet_kick_vq(struct vdpa_device *vdev, u16 idx)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+ /* not ready - ignore */
+ if (!snet->vqs[idx]->ready)
+ return;
+
+ iowrite32(SNET_KICK_VAL, snet->vqs[idx]->kick_ptr);
+}
+
+static void snet_set_vq_cb(struct vdpa_device *vdev, u16 idx, struct
vdpa_callback *cb)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ snet->vqs[idx]->cb.callback = cb->callback;
+ snet->vqs[idx]->cb.private = cb->private;
+}
+
+static void snet_set_vq_ready(struct vdpa_device *vdev, u16 idx, bool ready)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ snet->vqs[idx]->ready = ready;
+}
+
+static bool snet_get_vq_ready(struct vdpa_device *vdev, u16 idx)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ return snet->vqs[idx]->ready;
+}
+
+static int snet_set_vq_state(struct vdpa_device *vdev, u16 idx, const struct
vdpa_vq_state *state)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+ /* Setting the VQ state is not supported.
+ * If the asked state is the same as the initial one
+ * we can ignore it.
+ */
+ if (SNET_HAS_FEATURE(snet, VIRTIO_F_RING_PACKED)) {
+ const struct vdpa_vq_state_packed *p = &state->packed;
+
+ if (p->last_avail_counter == 1 && p->last_used_counter == 1
&&
+ p->last_avail_idx == 0 && p->last_used_idx == 0)
+ return 0;
+ } else {
+ const struct vdpa_vq_state_split *s = &state->split;
+
+ if (s->avail_index == 0)
+ return 0;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int snet_get_vq_state(struct vdpa_device *vdev, u16 idx, struct
vdpa_vq_state *state)
+{
+ /* Not supported */
+ return -EOPNOTSUPP;
+}
+
+static int snet_get_vq_irq(struct vdpa_device *vdev, u16 idx)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ return snet->vqs[idx]->irq;
+}
+
+static u32 snet_get_vq_align(struct vdpa_device *vdev)
+{
+ return (u32)SNET_QUEUE_ALIGNMENT;
+}
+
+static int snet_reset_dev(struct snet *snet)
+{
+ struct pci_dev *pdev = snet->pdev;
+ int ret = 0;
+ u32 i;
+
+ /* If status is 0, nothing to do */
+ if (!snet->status)
+ return 0;
+
+ /* If DPU started, send a destroy message */
+ if (snet->status & VIRTIO_CONFIG_S_DRIVER_OK)
+ ret = snet_send_msg(snet, SNET_MSG_DESTROY, true);
+
+ /* Clear VQs */
+ for (i = 0; i < snet->cfg->vq_num; i++) {
+ if (!snet->vqs[i])
+ continue;
+ snet->vqs[i]->cb.callback = NULL;
+ snet->vqs[i]->cb.private = NULL;
+ snet->vqs[i]->desc_area = 0;
+ snet->vqs[i]->device_area = 0;
+ snet->vqs[i]->driver_area = 0;
+ snet->vqs[i]->ready = false;
+ }
+
+ /* Clear config callback */
+ snet->cb.callback = NULL;
+ snet->cb.private = NULL;
+ /* Free IRQs */
+ snet_free_irqs(snet);
+ /* Reset status */
+ snet->status = 0;
+
+ if (ret)
+ SNET_WARN(pdev, "Incomplete reset to SNET[%u] device\n",
snet->sid);
+ else
+ SNET_DBG(pdev, "Reset SNET[%u] device\n", snet->sid);
+
+ return 0;
+}
+
+static int snet_reset(struct vdpa_device *vdev)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ return snet_reset_dev(snet);
+}
+
+static size_t snet_get_config_size(struct vdpa_device *vdev)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ return (size_t)snet->cfg->cfg_size;
+}
+
+static u64 snet_get_features(struct vdpa_device *vdev)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ return snet->cfg->features;
+}
+
+static int snet_set_drv_features(struct vdpa_device *vdev, u64 features)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ snet->negotiated_features = snet->cfg->features & features;
+ return 0;
+}
+
+static u64 snet_get_drv_features(struct vdpa_device *vdev)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ return snet->negotiated_features;
+}
+
+static u16 snet_get_vq_num_max(struct vdpa_device *vdev)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ return (u16)snet->cfg->vq_size;
+}
+
+static void snet_set_config_cb(struct vdpa_device *vdev, struct vdpa_callback
*cb)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ snet->cb.callback = cb->callback;
+ snet->cb.private = cb->private;
+}
+
+static u32 snet_get_device_id(struct vdpa_device *vdev)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ return snet->cfg->virtio_id;
+}
+
+static u32 snet_get_vendor_id(struct vdpa_device *vdev)
+{
+ return (u32)PCI_VENDOR_ID_SOLIDRUN;
+}
+
+static u8 snet_get_status(struct vdpa_device *vdev)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+
+ return snet->status;
+}
+
+static int snet_write_conf(struct snet *snet)
+{
+ u32 off, i, tmp;
+ int ret;
+
+ /* No need to write the config twice */
+ if (snet->dpu_ready)
+ return true;
+
+ /* Snet data :
+ *
+ * General data: SNET_GENERAL_CFG_LEN bytes long
+ * 0 0x4 0x8 0xC 0x10 0x14
0x1C 0x24
+ * | MAGIC NUMBER | CFG VER | SNET SID | NUMBER OF QUEUES | IRQ IDX |
FEATURES | RSVD |
+ *
+ * For every VQ: SNET_GENERAL_CFG_VQ_LEN bytes long
+ * 0 0x4 0x8
+ * | VQ SID AND QUEUE SIZE | IRQ Index |
+ * | DESC AREA |
+ * | DEVICE AREA |
+ * | DRIVER AREA |
+ * | RESERVED |
+ *
+ * Magic number should be written last, this is the DPU indication that the
data is ready
+ */
+
+ /* Init offset */
+ off = snet->psnet->cfg.host_cfg_off;
+
+ /* Ignore magic number for now */
+ off += 4;
+ snet_write32(snet, off, snet->psnet->negotiated_cfg_ver);
+ off += 4;
+ snet_write32(snet, off, snet->sid);
+ off += 4;
+ snet_write32(snet, off, snet->cfg->vq_num);
+ off += 4;
+ snet_write32(snet, off, snet->cfg_irq_idx);
+ off += 4;
+ snet_write64(snet, off, snet->negotiated_features);
+ off += 8;
+ /* Ignore reserved */
+ off += 8;
+ /* Write VQs */
+ for (i = 0 ; i < snet->cfg->vq_num ; i++) {
+ tmp = (i << 16) | (snet->vqs[i]->num & 0xFFFF);
+ snet_write32(snet, off, tmp);
+ off += 4;
+ snet_write32(snet, off, snet->vqs[i]->irq_idx);
+ off += 4;
+ snet_write64(snet, off, snet->vqs[i]->desc_area);
+ off += 8;
+ snet_write64(snet, off, snet->vqs[i]->device_area);
+ off += 8;
+ snet_write64(snet, off, snet->vqs[i]->driver_area);
+ off += 8;
+ /* Ignore reserved */
+ off += 8;
+ }
+
+ /* Clear snet messages address for this device */
+ snet_write32(snet, snet->psnet->cfg.msg_off, 0);
+ /* Write magic number - data is ready */
+ snet_write32(snet, snet->psnet->cfg.host_cfg_off, SNET_SIGNATURE);
+
+ /* The DPU will ACK the config by clearing the signature */
+ ret = readx_poll_timeout(ioread32, snet->bar +
snet->psnet->cfg.host_cfg_off,
+ tmp, !tmp, 10, SNET_READ_CFG_TIMEOUT);
+ if (ret) {
+ SNET_ERR(snet->pdev, "Timeout waiting for the DPU to read the
config\n");
+ return false;
+ }
+
+ /* set DPU flag */
+ snet->dpu_ready = true;
+
+ return true;
+}
+
+static int snet_request_irqs(struct pci_dev *pdev, struct snet *snet)
+{
+ int ret, i, irq;
+
+ /* Request config IRQ */
+ irq = pci_irq_vector(pdev, snet->cfg_irq_idx);
+ ret = devm_request_irq(&pdev->dev, irq, snet_cfg_irq_hndlr, 0,
+ snet->cfg_irq_name, snet);
+ if (ret) {
+ SNET_ERR(pdev, "Failed to request IRQ\n");
+ return ret;
+ }
+ snet->cfg_irq = irq;
+
+ /* Request IRQ for every VQ */
+ for (i = 0; i < snet->cfg->vq_num; i++) {
+ irq = pci_irq_vector(pdev, snet->vqs[i]->irq_idx);
+ ret = devm_request_irq(&pdev->dev, irq, snet_vq_irq_hndlr, 0,
+ snet->vqs[i]->irq_name, snet->vqs[i]);
+ if (ret) {
+ SNET_ERR(pdev, "Failed to request IRQ\n");
+ return ret;
+ }
+ snet->vqs[i]->irq = irq;
+ }
+ return 0;
+}
+
+static void snet_set_status(struct vdpa_device *vdev, u8 status)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+ struct psnet *psnet = snet->psnet;
+ struct pci_dev *pdev = snet->pdev;
+ int ret;
+ bool pf_irqs;
+
+ if (status == snet->status)
+ return;
+
+ if ((status & VIRTIO_CONFIG_S_DRIVER_OK) &&
+ !(snet->status & VIRTIO_CONFIG_S_DRIVER_OK)) {
+ /* Request IRQs */
+ pf_irqs = PSNET_FLAG_ON(psnet, SNET_CFG_FLAG_IRQ_PF);
+ ret = snet_request_irqs(pf_irqs ? pdev->physfn : pdev, snet);
+ if (ret)
+ goto set_err;
+
+ /* Write config to the DPU */
+ if (snet_write_conf(snet)) {
+ SNET_INFO(pdev, "Create SNET[%u] device\n", snet->sid);
+ } else {
+ snet_free_irqs(snet);
+ goto set_err;
+ }
+ }
+
+ /* Save the new status */
+ snet->status = status;
+ return;
+
+set_err:
+ snet->status |= VIRTIO_CONFIG_S_FAILED;
+}
+
+static void snet_get_config(struct vdpa_device *vdev, unsigned int offset,
+ void *buf, unsigned int len)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+ void __iomem *cfg_ptr = snet->cfg->virtio_cfg + offset;
+ u8 *buf_ptr = buf;
+ u32 i;
+
+ /* check for offset error */
+ if (offset + len > snet->cfg->cfg_size)
+ return;
+
+ /* Write into buffer */
+ for (i = 0; i < len; i++)
+ *buf_ptr++ = ioread8(cfg_ptr + i);
+}
+
+static void snet_set_config(struct vdpa_device *vdev, unsigned int offset,
+ const void *buf, unsigned int len)
+{
+ struct snet *snet = vdpa_to_snet(vdev);
+ void __iomem *cfg_ptr = snet->cfg->virtio_cfg + offset;
+ const u8 *buf_ptr = buf;
+ u32 i;
+
+ /* check for offset error */
+ if (offset + len > snet->cfg->cfg_size)
+ return;
+
+ /* Write into PCI BAR */
+ for (i = 0; i < len; i++)
+ iowrite8(*buf_ptr++, cfg_ptr + i);
+}
+
+static const struct vdpa_config_ops snet_config_ops = {
+ .set_vq_address = snet_set_vq_address,
+ .set_vq_num = snet_set_vq_num,
+ .kick_vq = snet_kick_vq,
+ .set_vq_cb = snet_set_vq_cb,
+ .set_vq_ready = snet_set_vq_ready,
+ .get_vq_ready = snet_get_vq_ready,
+ .set_vq_state = snet_set_vq_state,
+ .get_vq_state = snet_get_vq_state,
+ .get_vq_irq = snet_get_vq_irq,
+ .get_vq_align = snet_get_vq_align,
+ .reset = snet_reset,
+ .get_config_size = snet_get_config_size,
+ .get_device_features = snet_get_features,
+ .set_driver_features = snet_set_drv_features,
+ .get_driver_features = snet_get_drv_features,
+ .get_vq_num_min = snet_get_vq_num_max,
+ .get_vq_num_max = snet_get_vq_num_max,
+ .set_config_cb = snet_set_config_cb,
+ .get_device_id = snet_get_device_id,
+ .get_vendor_id = snet_get_vendor_id,
+ .get_status = snet_get_status,
+ .set_status = snet_set_status,
+ .get_config = snet_get_config,
+ .set_config = snet_set_config,
+};
+
+static int psnet_open_pf_bar(struct pci_dev *pdev, struct psnet *psnet)
+{
+ char name[25];
+ int ret, i, mask = 0;
+ /* We don't know which BAR will be used to communicate..
+ * We will map every bar with len > 0.
+ *
+ * Later, we will discover the BAR and unmap all other BARs.
+ */
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+ if (pci_resource_len(pdev, i))
+ mask |= (1 << i);
+ }
+
+ /* No BAR can be used.. */
+ if (!mask) {
+ SNET_ERR(pdev, "Failed to find a PCI BAR\n");
+ return -ENODEV;
+ }
+
+ snprintf(name, SNET_NAME_SIZE, "psnet[%s]-bars", pci_name(pdev));
+ ret = pcim_iomap_regions(pdev, mask, name);
+ if (ret) {
+ SNET_ERR(pdev, "Failed to request and map PCI BARs\n");
+ return ret;
+ }
+
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+ if (mask & (1 << i))
+ psnet->bars[i] = pcim_iomap_table(pdev)[i];
+ }
+
+ return 0;
+}
+
+static int snet_open_vf_bar(struct pci_dev *pdev, struct snet *snet)
+{
+ char name[20];
+ int ret;
+
+ snprintf(name, SNET_NAME_SIZE, "snet[%s]-bar", pci_name(pdev));
+ /* Request and map BAR */
+ ret = pcim_iomap_regions(pdev, BIT(snet->psnet->cfg.vf_bar), name);
+ if (ret) {
+ SNET_ERR(pdev, "Failed to request and map PCI BAR for a VF\n");
+ return ret;
+ }
+
+ snet->bar = pcim_iomap_table(pdev)[snet->psnet->cfg.vf_bar];
+
+ return 0;
+}
+
+static void snet_free_cfg(struct snet_cfg *cfg)
+{
+ u32 i;
+
+ if (!cfg->devs)
+ return;
+
+ /* Free devices */
+ for (i = 0; i < cfg->devices_num; i++) {
+ if (!cfg->devs[i])
+ break;
+
+ kfree(cfg->devs[i]);
+ }
+ /* Free pointers to devices */
+ kfree(cfg->devs);
+}
+
+/* Detect which BAR is used for communication with the device. */
+static int psnet_detect_bar(struct psnet *psnet, u32 off)
+{
+ unsigned long exit_time;
+ int i;
+
+ exit_time = jiffies + usecs_to_jiffies(SNET_DETECT_TIMEOUT);
+
+ /* SNET DPU will write SNET's signature when the config is ready. */
+ while (time_before(jiffies, exit_time)) {
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+ /* Is this BAR mapped? */
+ if (!psnet->bars[i])
+ continue;
+
+ if (ioread32(psnet->bars[i] + off) == SNET_SIGNATURE)
+ return i;
+ }
+ usleep_range(1000, 10000);
+ }
+
+ return -ENODEV;
+}
+
+static void psnet_unmap_unused_bars(struct pci_dev *pdev, struct psnet *psnet)
+{
+ int i, mask = 0;
+
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+ if (psnet->bars[i] && i != psnet->barno)
+ mask |= (1 << i);
+ }
+
+ if (mask)
+ pcim_iounmap_regions(pdev, mask);
+}
+
+/* Read SNET config from PCI BAR */
+static int psnet_read_cfg(struct pci_dev *pdev, struct psnet *psnet)
+{
+ struct snet_cfg *cfg = &psnet->cfg;
+ u32 i, off;
+ int barno;
+
+ /* Move to where the config starts */
+ off = SNET_CONFIG_OFF;
+
+ /* Find BAR used for communication */
+ barno = psnet_detect_bar(psnet, off);
+ if (barno < 0) {
+ SNET_ERR(pdev, "SNET config is not ready.\n");
+ return barno;
+ }
+
+ /* Save used BAR number and unmap all other BARs */
+ psnet->barno = barno;
+ SNET_DBG(pdev, "Using BAR number %d\n", barno);
+
+ psnet_unmap_unused_bars(pdev, psnet);
+
+ /* load config from BAR */
+ cfg->key = psnet_read32(psnet, off);
+ off += 4;
+ cfg->cfg_size = psnet_read32(psnet, off);
+ off += 4;
+ cfg->cfg_ver = psnet_read32(psnet, off);
+ off += 4;
+ /* The negotiated config version is the lower one between this driver's
config
+ * and the DPU's.
+ */
+ psnet->negotiated_cfg_ver = min_t(u32, cfg->cfg_ver, SNET_CFG_VERSION);
+ SNET_DBG(pdev, "SNET config version %u\n",
psnet->negotiated_cfg_ver);
+
+ cfg->vf_num = psnet_read32(psnet, off);
+ off += 4;
+ cfg->vf_bar = psnet_read32(psnet, off);
+ off += 4;
+ cfg->host_cfg_off = psnet_read32(psnet, off);
+ off += 4;
+ cfg->max_size_host_cfg = psnet_read32(psnet, off);
+ off += 4;
+ cfg->virtio_cfg_off = psnet_read32(psnet, off);
+ off += 4;
+ cfg->kick_off = psnet_read32(psnet, off);
+ off += 4;
+ cfg->hwmon_off = psnet_read32(psnet, off);
+ off += 4;
+ cfg->msg_off = psnet_read32(psnet, off);
+ off += 4;
+ cfg->flags = psnet_read32(psnet, off);
+ off += 4;
+ /* Ignore Reserved */
+ off += sizeof(cfg->rsvd);
+
+ cfg->devices_num = psnet_read32(psnet, off);
+ off += 4;
+ /* Allocate memory to hold pointer to the devices */
+ cfg->devs = kcalloc(cfg->devices_num, sizeof(void *), GFP_KERNEL);
+ if (!cfg->devs)
+ return -ENOMEM;
+
+ /* Load device configuration from BAR */
+ for (i = 0; i < cfg->devices_num; i++) {
+ cfg->devs[i] = kzalloc(sizeof(*cfg->devs[i]), GFP_KERNEL);
+ if (!cfg->devs[i]) {
+ snet_free_cfg(cfg);
+ return -ENOMEM;
+ }
+ /* Read device config */
+ cfg->devs[i]->virtio_id = psnet_read32(psnet, off);
+ off += 4;
+ cfg->devs[i]->vq_num = psnet_read32(psnet, off);
+ off += 4;
+ cfg->devs[i]->vq_size = psnet_read32(psnet, off);
+ off += 4;
+ cfg->devs[i]->vfid = psnet_read32(psnet, off);
+ off += 4;
+ cfg->devs[i]->features = psnet_read64(psnet, off);
+ off += 8;
+ /* Ignore Reserved */
+ off += sizeof(cfg->devs[i]->rsvd);
+
+ cfg->devs[i]->cfg_size = psnet_read32(psnet, off);
+ off += 4;
+
+ /* Is the config witten to the DPU going to be too big? */
+ if (SNET_GENERAL_CFG_LEN + SNET_GENERAL_CFG_VQ_LEN *
cfg->devs[i]->vq_num >
+ cfg->max_size_host_cfg) {
+ SNET_ERR(pdev, "Failed to read SNET config, the config is too
big..\n");
+ snet_free_cfg(cfg);
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int psnet_alloc_irq_vector(struct pci_dev *pdev, struct psnet *psnet)
+{
+ int ret = 0;
+ u32 i, irq_num = 0;
+
+ /* Let's count how many IRQs we need, 1 for every VQ + 1 for config change
*/
+ for (i = 0; i < psnet->cfg.devices_num; i++)
+ irq_num += psnet->cfg.devs[i]->vq_num + 1;
+
+ ret = pci_alloc_irq_vectors(pdev, irq_num, irq_num, PCI_IRQ_MSIX);
+ if (ret != irq_num) {
+ SNET_ERR(pdev, "Failed to allocate IRQ vectors\n");
+ return ret;
+ }
+ SNET_DBG(pdev, "Allocated %u IRQ vectors from physical function\n",
irq_num);
+
+ return 0;
+}
+
+static int snet_alloc_irq_vector(struct pci_dev *pdev, struct snet_dev_cfg
*snet_cfg)
+{
+ int ret = 0;
+ u32 irq_num;
+
+ /* We want 1 IRQ for every VQ + 1 for config change events */
+ irq_num = snet_cfg->vq_num + 1;
+
+ ret = pci_alloc_irq_vectors(pdev, irq_num, irq_num, PCI_IRQ_MSIX);
+ if (ret <= 0) {
+ SNET_ERR(pdev, "Failed to allocate IRQ vectors\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void snet_free_vqs(struct snet *snet)
+{
+ u32 i;
+
+ if (!snet->vqs)
+ return;
+
+ for (i = 0 ; i < snet->cfg->vq_num ; i++) {
+ if (!snet->vqs[i])
+ break;
+
+ kfree(snet->vqs[i]);
+ }
+ kfree(snet->vqs);
+}
+
+static int snet_build_vqs(struct snet *snet)
+{
+ u32 i;
+ /* Allocate the VQ pointers array */
+ snet->vqs = kcalloc(snet->cfg->vq_num, sizeof(void *), GFP_KERNEL);
+ if (!snet->vqs)
+ return -ENOMEM;
+
+ /* Allocate the VQs */
+ for (i = 0; i < snet->cfg->vq_num; i++) {
+ snet->vqs[i] = kzalloc(sizeof(*snet->vqs[i]), GFP_KERNEL);
+ if (!snet->vqs[i]) {
+ snet_free_vqs(snet);
+ return -ENOMEM;
+ }
+ /* Reset IRQ num */
+ snet->vqs[i]->irq = -1;
+ /* VQ serial ID */
+ snet->vqs[i]->sid = i;
+ /* Kick address - every VQ gets 4B */
+ snet->vqs[i]->kick_ptr = snet->bar + snet->psnet->cfg.kick_off
+
+ snet->vqs[i]->sid * 4;
+ /* Clear kick address for this VQ */
+ iowrite32(0, snet->vqs[i]->kick_ptr);
+ }
+ return 0;
+}
+
+static int psnet_get_next_irq_num(struct psnet *psnet)
+{
+ int irq;
+
+ spin_lock(&psnet->lock);
+ irq = psnet->next_irq++;
+ spin_unlock(&psnet->lock);
+
+ return irq;
+}
+
+static void snet_reserve_irq_idx(struct pci_dev *pdev, struct snet *snet)
+{
+ struct psnet *psnet = snet->psnet;
+ int i;
+
+ /* one IRQ for every VQ, and one for config changes */
+ snet->cfg_irq_idx = psnet_get_next_irq_num(psnet);
+ snprintf(snet->cfg_irq_name, SNET_NAME_SIZE, "snet[%s]-cfg[%d]",
+ pci_name(pdev), snet->cfg_irq_idx);
+
+ for (i = 0; i < snet->cfg->vq_num; i++) {
+ /* Get next free IRQ ID */
+ snet->vqs[i]->irq_idx = psnet_get_next_irq_num(psnet);
+ /* Write IRQ name */
+ snprintf(snet->vqs[i]->irq_name, SNET_NAME_SIZE,
"snet[%s]-vq[%d]",
+ pci_name(pdev), snet->vqs[i]->irq_idx);
+ }
+}
+
+/* Find a device config based on virtual function id */
+static struct snet_dev_cfg *snet_find_dev_cfg(struct snet_cfg *cfg, u32 vfid)
+{
+ u32 i;
+
+ for (i = 0; i < cfg->devices_num; i++) {
+ if (cfg->devs[i]->vfid == vfid)
+ return cfg->devs[i];
+ }
+ /* Oppss.. no config found.. */
+ return NULL;
+}
+
+/* Probe function for a physical PCI function */
+static int snet_vdpa_probe_pf(struct pci_dev *pdev)
+{
+ struct psnet *psnet;
+ int ret = 0;
+ bool pf_irqs = false;
+
+ ret = pcim_enable_device(pdev);
+ if (ret) {
+ SNET_ERR(pdev, "Failed to enable PCI device\n");
+ return ret;
+ }
+
+ /* Allocate a PCI physical function device */
+ psnet = kzalloc(sizeof(*psnet), GFP_KERNEL);
+ if (!psnet)
+ return -ENOMEM;
+
+ /* Init PSNET spinlock */
+ spin_lock_init(&psnet->lock);
+
+ pci_set_master(pdev);
+ pci_set_drvdata(pdev, psnet);
+
+ /* Open SNET MAIN BAR */
+ ret = psnet_open_pf_bar(pdev, psnet);
+ if (ret)
+ goto free_psnet;
+
+ /* Try to read SNET's config from PCI BAR */
+ ret = psnet_read_cfg(pdev, psnet);
+ if (ret)
+ goto free_psnet;
+
+ /* If SNET_CFG_FLAG_IRQ_PF flag is set, we should use
+ * PF MSI-X vectors
+ */
+ pf_irqs = PSNET_FLAG_ON(psnet, SNET_CFG_FLAG_IRQ_PF);
+
+ if (pf_irqs) {
+ ret = psnet_alloc_irq_vector(pdev, psnet);
+ if (ret)
+ goto free_cfg;
+ }
+
+ SNET_DBG(pdev, "Enable %u virtual functions\n",
psnet->cfg.vf_num);
+ ret = pci_enable_sriov(pdev, psnet->cfg.vf_num);
+ if (ret) {
+ SNET_ERR(pdev, "Failed to enable SR-IOV\n");
+ goto free_irq;
+ }
+
+ /* Create HW monitor device */
+ if (PSNET_FLAG_ON(psnet, SNET_CFG_FLAG_HWMON)) {
+#if IS_ENABLED(CONFIG_HWMON)
+ psnet_create_hwmon(pdev);
+#else
+ SNET_WARN(pdev, "Can't start HWMON, CONFIG_HWMON is not
enabled\n");
+#endif
+ }
+
+ return 0;
+
+free_irq:
+ if (pf_irqs)
+ pci_free_irq_vectors(pdev);
+free_cfg:
+ snet_free_cfg(&psnet->cfg);
+free_psnet:
+ kfree(psnet);
+ return ret;
+}
+
+/* Probe function for a virtual PCI function */
+static int snet_vdpa_probe_vf(struct pci_dev *pdev)
+{
+ struct pci_dev *pdev_pf = pdev->physfn;
+ struct psnet *psnet = pci_get_drvdata(pdev_pf);
+ struct snet_dev_cfg *dev_cfg;
+ struct snet *snet;
+ u32 vfid;
+ int ret;
+ bool pf_irqs = false;
+
+ /* Get virtual function id.
+ * (the DPU counts the VFs from 1)
+ */
+ ret = pci_iov_vf_id(pdev);
+ if (ret < 0) {
+ SNET_ERR(pdev, "Failed to find a VF id\n");
+ return ret;
+ }
+ vfid = ret + 1;
+
+ /* Find the snet_dev_cfg based on vfid */
+ dev_cfg = snet_find_dev_cfg(&psnet->cfg, vfid);
+ if (!dev_cfg) {
+ SNET_WARN(pdev, "Failed to find a VF config..\n");
+ return -ENODEV;
+ }
+
+ /* Which PCI device should allocate the IRQs?
+ * If the SNET_CFG_FLAG_IRQ_PF flag set, the PF device allocates the IRQs
+ */
+ pf_irqs = PSNET_FLAG_ON(psnet, SNET_CFG_FLAG_IRQ_PF);
+
+ ret = pcim_enable_device(pdev);
+ if (ret) {
+ SNET_ERR(pdev, "Failed to enable PCI VF device\n");
+ return ret;
+ }
+
+ /* Request for MSI-X IRQs */
+ if (!pf_irqs) {
+ ret = snet_alloc_irq_vector(pdev, dev_cfg);
+ if (ret)
+ return ret;
+ }
+
+ /* Allocate vdpa device */
+ snet = vdpa_alloc_device(struct snet, vdpa, &pdev->dev,
&snet_config_ops, 1, 1, NULL,
+ false);
+ if (!snet) {
+ SNET_ERR(pdev, "Failed to allocate a vdpa device\n");
+ ret = -ENOMEM;
+ goto free_irqs;
+ }
+
+ /* Save pci device pointer */
+ snet->pdev = pdev;
+ snet->psnet = psnet;
+ snet->cfg = dev_cfg;
+ snet->dpu_ready = false;
+ snet->sid = vfid;
+ /* Reset IRQ value */
+ snet->cfg_irq = -1;
+
+ ret = snet_open_vf_bar(pdev, snet);
+ if (ret)
+ goto put_device;
+
+ /* Create a VirtIO config pointer */
+ snet->cfg->virtio_cfg = snet->bar +
snet->psnet->cfg.virtio_cfg_off;
+
+ pci_set_master(pdev);
+ pci_set_drvdata(pdev, snet);
+
+ ret = snet_build_vqs(snet);
+ if (ret)
+ goto put_device;
+
+ /* Reserve IRQ indexes,
+ * The IRQs may be requested and freed multiple times,
+ * but the indexes won't change.
+ */
+ snet_reserve_irq_idx(pf_irqs ? pdev_pf : pdev, snet);
+
+ /*set DMA device*/
+ snet->vdpa.dma_dev = &pdev->dev;
+
+ /* Register VDPA device */
+ ret = vdpa_register_device(&snet->vdpa, snet->cfg->vq_num);
+ if (ret) {
+ SNET_ERR(pdev, "Failed to register vdpa device\n");
+ goto free_vqs;
+ }
+
+ return 0;
+
+free_vqs:
+ snet_free_vqs(snet);
+put_device:
+ put_device(&snet->vdpa.dev);
+free_irqs:
+ if (!pf_irqs)
+ pci_free_irq_vectors(pdev);
+ return ret;
+}
+
+static int snet_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id
*id)
+{
+ if (pdev->is_virtfn)
+ return snet_vdpa_probe_vf(pdev);
+ else
+ return snet_vdpa_probe_pf(pdev);
+}
+
+static void snet_vdpa_remove_pf(struct pci_dev *pdev)
+{
+ struct psnet *psnet = pci_get_drvdata(pdev);
+
+ pci_disable_sriov(pdev);
+ /* If IRQs are allocated from the PF, we should free the IRQs */
+ if (PSNET_FLAG_ON(psnet, SNET_CFG_FLAG_IRQ_PF))
+ pci_free_irq_vectors(pdev);
+
+ snet_free_cfg(&psnet->cfg);
+ kfree(psnet);
+}
+
+static void snet_vdpa_remove_vf(struct pci_dev *pdev)
+{
+ struct snet *snet = pci_get_drvdata(pdev);
+ struct psnet *psnet = snet->psnet;
+
+ /* If IRQs are allocated from the VF, we should free the IRQs */
+ if (!PSNET_FLAG_ON(psnet, SNET_CFG_FLAG_IRQ_PF))
+ pci_free_irq_vectors(pdev);
+
+ vdpa_unregister_device(&snet->vdpa);
+ snet_free_vqs(snet);
+}
+
+static void snet_vdpa_remove(struct pci_dev *pdev)
+{
+ if (pdev->is_virtfn)
+ snet_vdpa_remove_vf(pdev);
+ else
+ snet_vdpa_remove_pf(pdev);
+}
+
+static struct pci_device_id snet_driver_pci_ids[] = {
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_SOLIDRUN, SNET_DEVICE_ID,
+ PCI_VENDOR_ID_SOLIDRUN, SNET_DEVICE_ID) },
+ { 0 },
+};
+
+MODULE_DEVICE_TABLE(pci, snet_driver_pci_ids);
+
+static struct pci_driver snet_vdpa_driver = {
+ .name = "snet-vdpa-driver",
+ .id_table = snet_driver_pci_ids,
+ .probe = snet_vdpa_probe,
+ .remove = snet_vdpa_remove,
+};
+
+module_pci_driver(snet_vdpa_driver);
+
+MODULE_AUTHOR("Alvaro Karsz <alvaro.karsz at solid-run.com>");
+MODULE_DESCRIPTION("SolidRun vDPA driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/vdpa/solidrun/snet_vdpa.h
b/drivers/vdpa/solidrun/snet_vdpa.h
new file mode 100644
index 00000000000..3ebfb7deec4
--- /dev/null
+++ b/drivers/vdpa/solidrun/snet_vdpa.h
@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * SolidRun DPU driver for control plane
+ *
+ * Copyright (C) 2022 SolidRun
+ *
+ * Author: Alvaro Karsz <alvaro.karsz at solid-run.com>
+ *
+ */
+#ifndef _SNET_VDPA_H_
+#define _SNET_VDPA_H_
+
+#include <linux/vdpa.h>
+#include <linux/pci.h>
+
+#define SNET_NAME_SIZE 256
+
+#define SNET_ERR(pdev, fmt, ...) dev_err(&(pdev)->dev,
"%s"fmt, "snet_vdpa: ", ##__VA_ARGS__)
+#define SNET_WARN(pdev, fmt, ...) dev_warn(&(pdev)->dev,
"%s"fmt, "snet_vdpa: ", ##__VA_ARGS__)
+#define SNET_INFO(pdev, fmt, ...) dev_info(&(pdev)->dev,
"%s"fmt, "snet_vdpa: ", ##__VA_ARGS__)
+#define SNET_DBG(pdev, fmt, ...) dev_dbg(&(pdev)->dev,
"%s"fmt, "snet_vdpa: ", ##__VA_ARGS__)
+#define SNET_HAS_FEATURE(s, f) ((s)->negotiated_features & BIT_ULL(f))
+/* VQ struct */
+struct snet_vq {
+ /* VQ callback */
+ struct vdpa_callback cb;
+ /* desc base address */
+ u64 desc_area;
+ /* device base address */
+ u64 device_area;
+ /* driver base address */
+ u64 driver_area;
+ /* Queue size */
+ u32 num;
+ /* Serial ID for VQ */
+ u32 sid;
+ /* is ready flag */
+ bool ready;
+ /* IRQ number */
+ u32 irq;
+ /* IRQ index, DPU uses this to parse data from MSI-X table */
+ u32 irq_idx;
+ /* IRQ name */
+ char irq_name[SNET_NAME_SIZE];
+ /* pointer to mapped PCI BAR register used by this VQ to kick */
+ void __iomem *kick_ptr;
+};
+
+struct snet {
+ /* vdpa device */
+ struct vdpa_device vdpa;
+ /* Config callback */
+ struct vdpa_callback cb;
+ /* array of virqueues */
+ struct snet_vq **vqs;
+ /* Used features */
+ u64 negotiated_features;
+ /* Device serial ID */
+ u32 sid;
+ /* device status */
+ u8 status;
+ /* boolean indicating if snet config was passed to the device */
+ bool dpu_ready;
+ /* IRQ number */
+ u32 cfg_irq;
+ /* IRQ index, DPU uses this to parse data from MSI-X table */
+ u32 cfg_irq_idx;
+ /* IRQ name */
+ char cfg_irq_name[SNET_NAME_SIZE];
+ /* BAR to access the VF */
+ void __iomem *bar;
+ /* PCI device */
+ struct pci_dev *pdev;
+ /* Pointer to snet pdev parent device */
+ struct psnet *psnet;
+ /* Pointer to snet config device */
+ struct snet_dev_cfg *cfg;
+};
+
+struct snet_dev_cfg {
+ /* Device ID following VirtIO spec. */
+ u32 virtio_id;
+ /* Number of VQs for this device */
+ u32 vq_num;
+ /* Size of every VQ */
+ u32 vq_size;
+ /* Virtual Function id */
+ u32 vfid;
+ /* Device features, following VirtIO spec */
+ u64 features;
+ /* Reserved for future usage */
+ u32 rsvd[6];
+ /* VirtIO device specific config size */
+ u32 cfg_size;
+ /* VirtIO device specific config address */
+ void __iomem *virtio_cfg;
+} __packed;
+
+struct snet_cfg {
+ /* Magic key */
+ u32 key;
+ /* Size of total config in bytes */
+ u32 cfg_size;
+ /* Config version */
+ u32 cfg_ver;
+ /* Number of Virtual Functions to create */
+ u32 vf_num;
+ /* BAR to use for the VFs */
+ u32 vf_bar;
+ /* Where should we write the SNET's config */
+ u32 host_cfg_off;
+ /* Max. allowed size for a SNET's config */
+ u32 max_size_host_cfg;
+ /* VirtIO config offset in BAR */
+ u32 virtio_cfg_off;
+ /* Offset in PCI BAR for VQ kicks */
+ u32 kick_off;
+ /* Offset in PCI BAR for HW monitoring */
+ u32 hwmon_off;
+ /* Offset in PCI BAR for SNET messages */
+ u32 msg_off;
+ /* Config general flags - enum snet_cfg_flags */
+ u32 flags;
+ /* Reserved for future usage */
+ u32 rsvd[6];
+ /* Number of snet devices */
+ u32 devices_num;
+ /* The actual devices */
+ struct snet_dev_cfg **devs;
+} __packed;
+
+/* SolidNET PCIe device, one device per PCIe physical function */
+struct psnet {
+ /* PCI BARs */
+ void __iomem *bars[PCI_STD_NUM_BARS];
+ /* Negotiated config version */
+ u32 negotiated_cfg_ver;
+ /* Next IRQ index to use in case when the IRQs are allocated from this device
*/
+ u32 next_irq;
+ /* BAR number used to communicate with the device */
+ u8 barno;
+ /* spinlock to protect data that can be changed by SNET devices */
+ spinlock_t lock;
+ /* Pointer to the device's config read from BAR */
+ struct snet_cfg cfg;
+ /* Name of monitor device */
+ char hwmon_name[SNET_NAME_SIZE];
+};
+
+enum snet_cfg_flags {
+ /* Create a HWMON device */
+ SNET_CFG_FLAG_HWMON = BIT(0),
+ /* USE IRQs from the physical function */
+ SNET_CFG_FLAG_IRQ_PF = BIT(1),
+};
+
+#define PSNET_FLAG_ON(p, f) ((p)->cfg.flags & (f))
+
+static inline u32 psnet_read32(struct psnet *psnet, u32 off)
+{
+ return ioread32(psnet->bars[psnet->barno] + off);
+}
+
+static inline u32 snet_read32(struct snet *snet, u32 off)
+{
+ return ioread32(snet->bar + off);
+}
+
+static inline void snet_write32(struct snet *snet, u32 off, u32 val)
+{
+ iowrite32(val, snet->bar + off);
+}
+
+static inline u64 psnet_read64(struct psnet *psnet, u32 off)
+{
+ u64 val;
+ /* 64bits are written in 2 halves, low part first */
+ val = (u64)psnet_read32(psnet, off);
+ val |= ((u64)psnet_read32(psnet, off + 4) << 32);
+ return val;
+}
+
+static inline void snet_write64(struct snet *snet, u32 off, u64 val)
+{
+ /* The DPU expects a 64bit integer in 2 halves, the low part first */
+ snet_write32(snet, off, (u32)val);
+ snet_write32(snet, off + 4, (u32)(val >> 32));
+}
+
+#if IS_ENABLED(CONFIG_HWMON)
+void psnet_create_hwmon(struct pci_dev *pdev);
+#else
+void psnet_create_hwmon(struct pci_dev *pdev) {}
+#endif
+
+#endif //_SNET_VDPA_H_
--
2.32.0