On Tue, Feb 15, 2022 at 10:18 AM Zhu, Lingshan <lingshan.zhu at intel.com>
wrote:>
>
>
> On 2/14/2022 10:27 PM, Michael S. Tsirkin wrote:
> > On Mon, Feb 14, 2022 at 06:01:56PM +0800, Zhu Lingshan wrote:
> >>
> >> On 2/14/2022 3:19 PM, Jason Wang wrote:
> >>> ? 2022/2/3 ??3:27, Zhu Lingshan ??:
> >>>> On some platforms/devices, there may not be enough MSI
vector
> >>>> slots allocated for virtqueues and config changes. In such
a case,
> >>>> the interrupt sources(virtqueues, config changes) must
share
> >>>> an IRQ/vector, to avoid initialization failures, keep
> >>>> the device functional.
> >>>>
> >>>> This commit handles three cases:
> >>>> (1) number of the allocated vectors == the number of
virtqueues + 1
> >>>> (config changes), every virtqueue and the config interrupt
has
> >>>> a separated vector/IRQ, the best and the most likely case.
> >>>> (2) number of the allocated vectors is less than the best
case, but
> >>>> greater than 1. In this case, all virtqueues share a
vector/IRQ,
> >>>> the config interrupt has a separated vector/IRQ
> >>>> (3) only one vector is allocated, in this case, the
virtqueues and
> >>>> the config interrupt share a vector/IRQ. The worst and
most
> >>>> unlikely case.
> >>>>
> >>>> Otherwise, it needs to fail.
> >>>>
> >>>> This commit introduces some helper functions:
> >>>> ifcvf_set_vq_vector() and ifcvf_set_config_vector() sets
virtqueue
> >>>> vector and config vector in the device config space, so
that
> >>>> the device can send interrupt DMA.
> >>>>
> >>>> This commit adds some fields in struct ifcvf_hw and
re-placed
> >>>> the existed fields to be aligned with the cacheline.
> >>>>
> >>>> Signed-off-by: Zhu Lingshan <lingshan.zhu at
intel.com>
> >>>> ---
> >>>> drivers/vdpa/ifcvf/ifcvf_base.c | 47 ++++--
> >>>> drivers/vdpa/ifcvf/ifcvf_base.h | 23 ++-
> >>>> drivers/vdpa/ifcvf/ifcvf_main.c | 243
+++++++++++++++++++++++++++-----
> >>>> 3 files changed, 256 insertions(+), 57 deletions(-)
> >>>>
> >>>> diff --git a/drivers/vdpa/ifcvf/ifcvf_base.c
> >>>> b/drivers/vdpa/ifcvf/ifcvf_base.c
> >>>> index 397692ae671c..18dcb63ab1e3 100644
> >>>> --- a/drivers/vdpa/ifcvf/ifcvf_base.c
> >>>> +++ b/drivers/vdpa/ifcvf/ifcvf_base.c
> >>>> @@ -15,6 +15,36 @@ struct ifcvf_adapter
*vf_to_adapter(struct
> >>>> ifcvf_hw *hw)
> >>>> return container_of(hw, struct ifcvf_adapter, vf);
> >>>> }
> >>>> +int ifcvf_set_vq_vector(struct ifcvf_hw *hw, u16 qid,
int vector)
> >>>> +{
> >>>> + struct virtio_pci_common_cfg __iomem *cfg =
hw->common_cfg;
> >>>> + struct ifcvf_adapter *ifcvf = vf_to_adapter(hw);
> >>>> +
> >>>> + ifc_iowrite16(qid, &cfg->queue_select);
> >>>> + ifc_iowrite16(vector,
&cfg->queue_msix_vector);
> >>>> + if (ifc_ioread16(&cfg->queue_msix_vector)
=> >>>> VIRTIO_MSI_NO_VECTOR) {
> >>>> + IFCVF_ERR(ifcvf->pdev, "No msix vector
for queue %u\n", qid);
> >>>> + return -EINVAL;
> >>>> + }
> >>>
> >>> Let's leave this check for the caller, E.g can caller try
to assign
> >>> NO_VECTOR during uni-nit?
> >> ifcvf driver sets NO_VECTOR when call hw_disable(). I am not sure
whether I
> >> get it,
I meant you invent the ifcvf_set_vq_vector() you'd better use that in
hw_disable() as well.
> >> Yes we can let the caller check a vq vector, however this may
cause more
> >> than three levels brackets, may looks ugly.
I don't understand here, this is how virito_pci did:
/*
* vp_modern_queue_vector - set the MSIX vector for a specific virtqueue
* @mdev: the modern virtio-pci device
* @index: queue index
* @vector: the config vector
*
* Returns the config vector read from the device
*/
u16 vp_modern_queue_vector(struct virtio_pci_modern_device *mdev,
u16 index, u16 vector)
{
struct virtio_pci_common_cfg __iomem *cfg = mdev->common;
vp_iowrite16(index, &cfg->queue_select);
vp_iowrite16(vector, &cfg->queue_msix_vector);
/* Flush the write out to device */
return vp_ioread16(&cfg->queue_msix_vector);
}
EXPORT_SYMBOL_GPL(vp_modern_queue_vector);
> >>>
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> +int ifcvf_set_config_vector(struct ifcvf_hw *hw, int
vector)
> >>>> +{
> >>>> + struct virtio_pci_common_cfg __iomem *cfg =
hw->common_cfg;
> >>>> + struct ifcvf_adapter *ifcvf = vf_to_adapter(hw);
> >>>> +
> >>>> + cfg = hw->common_cfg;
> >>>> + ifc_iowrite16(vector, &cfg->msix_config);
> >>>> + if (ifc_ioread16(&cfg->msix_config) ==
VIRTIO_MSI_NO_VECTOR) {
> >>>> + IFCVF_ERR(ifcvf->pdev, "No msix vector
for device config\n");
> >>>> + return -EINVAL;
> >>>> + }
> >>>
> >>> Similar question as above.
> >>>
> >>>
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> static void __iomem *get_cap_addr(struct ifcvf_hw *hw,
> >>>> struct virtio_pci_cap *cap)
> >>>> {
> >>>> @@ -140,6 +170,8 @@ int ifcvf_init_hw(struct ifcvf_hw *hw,
struct
> >>>> pci_dev *pdev)
> >>>> hw->common_cfg, hw->notify_base,
hw->isr,
> >>>> hw->dev_cfg,
hw->notify_off_multiplier);
> >>>> + hw->vqs_shared_irq = -EINVAL;
> >>>> +
> >>>> return 0;
> >>>> }
> >>>> @@ -321,12 +353,6 @@ static int ifcvf_hw_enable(struct
ifcvf_hw *hw)
> >>>> ifcvf = vf_to_adapter(hw);
> >>>> cfg = hw->common_cfg;
> >>>> - ifc_iowrite16(IFCVF_MSI_CONFIG_OFF,
&cfg->msix_config);
> >>>> -
> >>>> - if (ifc_ioread16(&cfg->msix_config) ==
VIRTIO_MSI_NO_VECTOR) {
> >>>> - IFCVF_ERR(ifcvf->pdev, "No msix vector
for device config\n");
> >>>> - return -EINVAL;
> >>>> - }
> >>>> for (i = 0; i < hw->nr_vring; i++) {
> >>>> if (!hw->vring[i].ready)
> >>>> @@ -340,15 +366,6 @@ static int ifcvf_hw_enable(struct
ifcvf_hw *hw)
> >>>> ifc_iowrite64_twopart(hw->vring[i].used,
&cfg->queue_used_lo,
> >>>> &cfg->queue_used_hi);
> >>>> ifc_iowrite16(hw->vring[i].size,
&cfg->queue_size);
> >>>> - ifc_iowrite16(i + IFCVF_MSI_QUEUE_OFF,
> >>>> &cfg->queue_msix_vector);
> >>>> -
> >>>> - if (ifc_ioread16(&cfg->queue_msix_vector)
=> >>>> - VIRTIO_MSI_NO_VECTOR) {
> >>>> - IFCVF_ERR(ifcvf->pdev,
> >>>> - "No msix vector for queue
%u\n", i);
> >>>> - return -EINVAL;
> >>>> - }
> >>>> -
> >>>> ifcvf_set_vq_state(hw, i,
hw->vring[i].last_avail_idx);
> >>>> ifc_iowrite16(1, &cfg->queue_enable);
> >>>> }
> >>>> diff --git a/drivers/vdpa/ifcvf/ifcvf_base.h
> >>>> b/drivers/vdpa/ifcvf/ifcvf_base.h
> >>>> index 949b4fb9d554..9cfe088c82e9 100644
> >>>> --- a/drivers/vdpa/ifcvf/ifcvf_base.h
> >>>> +++ b/drivers/vdpa/ifcvf/ifcvf_base.h
> >>>> @@ -27,8 +27,6 @@
> >>>> #define IFCVF_QUEUE_ALIGNMENT PAGE_SIZE
> >>>> #define IFCVF_QUEUE_MAX 32768
> >>>> -#define IFCVF_MSI_CONFIG_OFF 0
> >>>> -#define IFCVF_MSI_QUEUE_OFF 1
> >>>> #define IFCVF_PCI_MAX_RESOURCE 6
> >>>> #define IFCVF_LM_CFG_SIZE 0x40
> >>>> @@ -42,6 +40,13 @@
> >>>> #define ifcvf_private_to_vf(adapter) \
> >>>> (&((struct ifcvf_adapter *)adapter)->vf)
> >>>> +/* all vqs and config interrupt has its own vector */
> >>>> +#define MSIX_VECTOR_PER_VQ_AND_CONFIG 1
> >>>> +/* all vqs share a vector, and config interrupt has a
separate
> >>>> vector */
> >>>> +#define MSIX_VECTOR_SHARED_VQ_AND_CONFIG 2
> >>>> +/* all vqs and config interrupt share a vector */
> >>>> +#define MSIX_VECTOR_DEV_SHARED 3
> >>>
> >>> I think there's no much value to differ 2 from 3 consider
config
> >>> interrupt should be rare.
> >> IMHO we still need 2 and 3, because
MSIX_VECTOR_SHARED_VQ_AND_CONFIG means
> >> there are at least 2 vectors,
> >> the vqs share one vector, config change has its own vector.
I want to know the value of having a dedicated vector for config?
> >> MSIX_VECTOR_DEV_SHARED means three are only one vector, all vqs
and config
> >> changes need to share this vector.
> >>>
> >>>
> >>>> +
> >>>> static inline u8 ifc_ioread8(u8 __iomem *addr)
> >>>> {
> >>>> return ioread8(addr);
> >>>> @@ -97,25 +102,27 @@ struct ifcvf_hw {
> >>>> u8 __iomem *isr;
> >>>> /* Live migration */
> >>>> u8 __iomem *lm_cfg;
> >>>> - u16 nr_vring;
> >>>
> >>> Any reason for moving nv_vring, config_size, and other stuffs?
> >> for cacheline alignment.
> > maybe a separate patch then.
> Sure
>
> Thanks!
> >
> >>>
> >>>
> >>>> /* Notification bar number */
> >>>> u8 notify_bar;
> >>>> + u8 msix_vector_status;
> >>>> + /* virtio-net or virtio-blk device config size */
> >>>> + u32 config_size;
> >>>> /* Notificaiton bar address */
> >>>> void __iomem *notify_base;
> >>>> phys_addr_t notify_base_pa;
> >>>> u32 notify_off_multiplier;
> >>>> + u32 dev_type;
> >>>> u64 req_features;
> >>>> u64 hw_features;
> >>>> - u32 dev_type;
> >>>> struct virtio_pci_common_cfg __iomem *common_cfg;
> >>>> void __iomem *dev_cfg;
> >>>> struct vring_info vring[IFCVF_MAX_QUEUES];
> >>>> void __iomem * const *base;
> >>>> char config_msix_name[256];
> >>>> struct vdpa_callback config_cb;
> >>>> - unsigned int config_irq;
> >>>> - /* virtio-net or virtio-blk device config size */
> >>>> - u32 config_size;
> >>>> + int config_irq;
> >>>> + int vqs_shared_irq;
> >>>> + u16 nr_vring;
> >>>> };
> >>>> struct ifcvf_adapter {
> >>>> @@ -160,4 +167,6 @@ int ifcvf_set_vq_state(struct ifcvf_hw
*hw, u16
> >>>> qid, u16 num);
> >>>> struct ifcvf_adapter *vf_to_adapter(struct ifcvf_hw
*hw);
> >>>> int ifcvf_probed_virtio_net(struct ifcvf_hw *hw);
> >>>> u32 ifcvf_get_config_size(struct ifcvf_hw *hw);
> >>>> +int ifcvf_set_vq_vector(struct ifcvf_hw *hw, u16 qid, int
vector);
> >>>> +int ifcvf_set_config_vector(struct ifcvf_hw *hw, int
vector);
> >>>> #endif /* _IFCVF_H_ */
> >>>> diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c
> >>>> b/drivers/vdpa/ifcvf/ifcvf_main.c
> >>>> index 44c89ab0b6da..ca414399f040 100644
> >>>> --- a/drivers/vdpa/ifcvf/ifcvf_main.c
> >>>> +++ b/drivers/vdpa/ifcvf/ifcvf_main.c
> >>>> @@ -17,6 +17,7 @@
> >>>> #define DRIVER_AUTHOR "Intel Corporation"
> >>>> #define IFCVF_DRIVER_NAME "ifcvf"
> >>>> +/* handles config interrupt */
> >>>
> >>> This seems unrelated to the shared IRQ logic and it looks
useless since
> >>> it's easily to deduce it from the function name below.
> >> OK, do you mean the comments? I can remove these comments.
Yes.
> >>>
> >>>> static irqreturn_t ifcvf_config_changed(int irq, void
*arg)
> >>>> {
> >>>> struct ifcvf_hw *vf = arg;
> >>>> @@ -27,6 +28,7 @@ static irqreturn_t
ifcvf_config_changed(int irq,
> >>>> void *arg)
> >>>> return IRQ_HANDLED;
> >>>> }
> >>>> +/* handles vqs interrupt */
> >>>
> >>> So did this.
> >>>
> >>>
> >>>> static irqreturn_t ifcvf_intr_handler(int irq, void
*arg)
> >>>> {
> >>>> struct vring_info *vring = arg;
> >>>> @@ -37,24 +39,78 @@ static irqreturn_t
ifcvf_intr_handler(int irq,
> >>>> void *arg)
> >>>> return IRQ_HANDLED;
> >>>> }
> >>>> +/* handls vqs shared interrupt */
> >>>> +static irqreturn_t ifcvf_vq_shared_intr_handler(int irq,
void *arg)
> >>>> +{
> >>>> + struct ifcvf_hw *vf = arg;
> >>>> + struct vring_info *vring;
> >>>> + int i;
> >>>> +
> >>>> + for (i = 0; i < vf->nr_vring; i++) {
> >>>> + vring = &vf->vring[i];
> >>>> + if (vring->cb.callback)
> >>>> + vf->vring->cb.callback(vring->cb.private);
> >>>> + }
> >>>> +
> >>>> + return IRQ_HANDLED;
> >>>> +}
> >>>> +
> >>>> +/* handles a shared interrupt for vqs and config */
> >>>> +static irqreturn_t ifcvf_dev_shared_intr_handler(int irq,
void *arg)
> >>>> +{
> >>>> + struct ifcvf_hw *vf = arg;
> >>>> + u8 isr;
> >>>> +
> >>>> + isr = ifc_ioread8(vf->isr);
> >>>
> >>> We need to exactly what vp_interrupt do here. Checking against
vf->isr
> >>> first and return IRQ_NONE if it is not set.
> >>>
> >>> Always return IRQ_HANDLED will break the device who shares an
irq with
> >>> IFCVF.
> >> as we discussed in another thread(spec inconsistency about ISR),
ISR may
> >> only works for INTx for now,
> >> but VFs don't have INTx, and a VF may not share its vectors
with other
> >> devices, so I guess it can work
> >> and may be our best try for now.
Right, I thought you're using shared irq but actually not.
> >>>
> >>>> + if (isr & VIRTIO_PCI_ISR_CONFIG)
> >>>> + ifcvf_config_changed(irq, arg);
I wonder how ISR works in IFCVF, if ISR doesn't work for MSI, we need
to remove the check of isr otherwise we will break config interrupt?
> >>>> +
> >>>> + return ifcvf_vq_shared_intr_handler(irq, arg);
> >>>> +}
> >>>> +
> >>>> static void ifcvf_free_irq_vectors(void *data)
> >>>> {
> >>>> pci_free_irq_vectors(data);
> >>>> }
> >>>> -static void ifcvf_free_irq(struct ifcvf_adapter
*adapter, int queues)
> >>>> +static void ifcvf_free_vq_irq(struct ifcvf_adapter
*adapter, int
> >>>> queues)
> >>>> {
> >>>> struct pci_dev *pdev = adapter->pdev;
> >>>> struct ifcvf_hw *vf = &adapter->vf;
> >>>> int i;
> >>>> + if (vf->msix_vector_status ==
MSIX_VECTOR_PER_VQ_AND_CONFIG) {
> >>>> + for (i = 0; i < queues; i++) {
> >>>> + devm_free_irq(&pdev->dev,
vf->vring[i].irq, &vf->vring[i]);
> >>>> + vf->vring[i].irq = -EINVAL;
> >>>> + }
> >>>> + } else {
> >>>> + devm_free_irq(&pdev->dev,
vf->vqs_shared_irq, vf);
> >>>> + vf->vqs_shared_irq = -EINVAL;
> >>>> + }
> >>>> +}
> >>>> - for (i = 0; i < queues; i++) {
> >>>> - devm_free_irq(&pdev->dev,
vf->vring[i].irq, &vf->vring[i]);
> >>>> - vf->vring[i].irq = -EINVAL;
> >>>> +static void ifcvf_free_config_irq(struct ifcvf_adapter
*adapter)
> >>>> +{
> >>>> + struct pci_dev *pdev = adapter->pdev;
> >>>> + struct ifcvf_hw *vf = &adapter->vf;
> >>>> +
> >>>> + /* If the irq is shared by all vqs and the config
interrupt,
> >>>> + * it is already freed in ifcvf_free_vq_irq, so here
only
> >>>> + * need to free config irq when msix_vector_status
!> >>>> MSIX_VECTOR_DEV_SHARED
> >>>> + */
> >>>> + if (vf->msix_vector_status !=
MSIX_VECTOR_DEV_SHARED) {
> >>>> + devm_free_irq(&pdev->dev,
vf->config_irq, vf);
> >>>> + vf->config_irq = -EINVAL;
> >>>> }
> >>>> +}
> >>>> +
> >>>> +static void ifcvf_free_irq(struct ifcvf_adapter *adapter,
int queues)
> >>>> +{
> >>>> + struct pci_dev *pdev = adapter->pdev;
> >>>> - devm_free_irq(&pdev->dev,
vf->config_irq, vf);
> >>>> + ifcvf_free_vq_irq(adapter, queues);
> >>>> + ifcvf_free_config_irq(adapter);
> >>>> ifcvf_free_irq_vectors(pdev);
> >>>> }
> >>>> @@ -86,58 +142,172 @@ static int
ifcvf_alloc_vectors(struct
> >>>> ifcvf_adapter *adapter)
> >>>> return ret;
> >>>> }
> >>>> -static int ifcvf_request_irq(struct ifcvf_adapter
*adapter)
> >>>> +static int ifcvf_request_per_vq_irq(struct ifcvf_adapter
*adapter)
> >>>> {
> >>>> struct pci_dev *pdev = adapter->pdev;
> >>>> struct ifcvf_hw *vf = &adapter->vf;
> >>>> - int vector, nvectors, i, ret, irq;
> >>>> - u16 max_intr;
> >>>> + int i, vector, ret, irq;
> >>>> - nvectors = ifcvf_alloc_vectors(adapter);
> >>>> - if (!(nvectors > 0))
> >>>> - return nvectors;
> >>>> + for (i = 0; i < vf->nr_vring; i++) {
> >>>> + snprintf(vf->vring[i].msix_name, 256,
"ifcvf[%s]-%d\n",
> >>>> pci_name(pdev), i);
> >>>> + vector = i;
> >>>> + irq = pci_irq_vector(pdev, vector);
> >>>> + ret = devm_request_irq(&pdev->dev, irq,
> >>>> + ifcvf_intr_handler, 0,
> >>>> + vf->vring[i].msix_name,
> >>>> + &vf->vring[i]);
> >>>> + if (ret) {
> >>>> + IFCVF_ERR(pdev, "Failed to request irq
for vq %d\n", i);
> >>>> + ifcvf_free_vq_irq(adapter, i);
> >>>> + } else {
> >>>> + vf->vring[i].irq = irq;
> >>>> + ifcvf_set_vq_vector(vf, i, vector);
> >>>> + }
> >>>> + }
> >>>> - max_intr = vf->nr_vring + 1;
> >>>> + vf->vqs_shared_irq = -EINVAL;
> >>>> +
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> +static int ifcvf_request_shared_vq_irq(struct
ifcvf_adapter *adapter)
> >>>> +{
> >>>> + struct pci_dev *pdev = adapter->pdev;
> >>>> + struct ifcvf_hw *vf = &adapter->vf;
> >>>> + int i, vector, ret, irq;
> >>>> +
> >>>> + vector = 0;
> >>>> + /* reuse msix_name[256] space of vring0 to store
shared vqs
> >>>> interrupt name */
> >>>
> >>> I think we can remove this comment since the code is
straightforward.
> >> sure
> >>>
> >>>> + snprintf(vf->vring[0].msix_name, 256,
> >>>> "ifcvf[%s]-vqs-shared-irq\n", pci_name(pdev));
> >>>> + irq = pci_irq_vector(pdev, vector);
> >>>> + ret = devm_request_irq(&pdev->dev, irq,
> >>>> + ifcvf_vq_shared_intr_handler, 0,
> >>>> + vf->vring[0].msix_name, vf);
> >>>> + if (ret) {
> >>>> + IFCVF_ERR(pdev, "Failed to request shared
irq for vf\n");
> >>>> +
> >>>> + return ret;
> >>>> + }
> >>>> +
> >>>> + vf->vqs_shared_irq = irq;
> >>>> + for (i = 0; i < vf->nr_vring; i++) {
> >>>> + vf->vring[i].irq = -EINVAL;
> >>>> + ifcvf_set_vq_vector(vf, i, vector);
> >>>> + }
> >>>> +
> >>>> + return 0;
> >>>> +
> >>>> +}
> >>>> +
> >>>> +static int ifcvf_request_dev_shared_irq(struct
ifcvf_adapter *adapter)
> >>>> +{
> >>>> + struct pci_dev *pdev = adapter->pdev;
> >>>> + struct ifcvf_hw *vf = &adapter->vf;
> >>>> + int i, vector, ret, irq;
> >>>> +
> >>>> + vector = 0;
> >>>> + /* reuse msix_name[256] space of vring0 to store
shared device
> >>>> interrupt name */
> >>>> + snprintf(vf->vring[0].msix_name, 256,
> >>>> "ifcvf[%s]-dev-shared-irq\n", pci_name(pdev));
> >>>> + irq = pci_irq_vector(pdev, vector);
> >>>> + ret = devm_request_irq(&pdev->dev, irq,
> >>>> + ifcvf_dev_shared_intr_handler, 0,
> >>>> + vf->vring[0].msix_name, vf);
> >>>> + if (ret) {
> >>>> + IFCVF_ERR(pdev, "Failed to request shared
irq for vf\n");
> >>>> - ret = pci_alloc_irq_vectors(pdev, max_intr,
> >>>> - max_intr, PCI_IRQ_MSIX);
> >>>> - if (ret < 0) {
> >>>> - IFCVF_ERR(pdev, "Failed to alloc IRQ
vectors\n");
> >>>> return ret;
> >>>> }
> >>>> + vf->vqs_shared_irq = irq;
> >>>> + for (i = 0; i < vf->nr_vring; i++) {
> >>>> + vf->vring[i].irq = -EINVAL;
> >>>> + ifcvf_set_vq_vector(vf, i, vector);
> >>>> + }
> >>>> +
> >>>> + vf->config_irq = irq;
> >>>> + ifcvf_set_config_vector(vf, vector);
> >>>> +
> >>>> + return 0;
> >>>> +
> >>>> +}
> >>>> +
> >>>> +static int ifcvf_request_vq_irq(struct ifcvf_adapter
*adapter)
> >>>> +{
> >>>> + struct ifcvf_hw *vf = &adapter->vf;
> >>>> + int ret;
> >>>> +
> >>>> + if (vf->msix_vector_status ==
MSIX_VECTOR_PER_VQ_AND_CONFIG)
> >>>> + ret = ifcvf_request_per_vq_irq(adapter);
> >>>> + else
> >>>> + ret = ifcvf_request_shared_vq_irq(adapter);
> >>>> +
> >>>> + return ret;
> >>>> +}
> >>>> +
> >>>> +static int ifcvf_request_config_irq(struct ifcvf_adapter
*adapter)
> >>>> +{
> >>>> + struct pci_dev *pdev = adapter->pdev;
> >>>> + struct ifcvf_hw *vf = &adapter->vf;
> >>>> + int config_vector, ret;
> >>>> +
> >>>> + if (vf->msix_vector_status ==
MSIX_VECTOR_DEV_SHARED)
> >>>> + return 0;
> >>>> +
> >>>> + if (vf->msix_vector_status ==
MSIX_VECTOR_PER_VQ_AND_CONFIG)
> >>>> + /* vector 0 ~ vf->nr_vring for vqs, num
vf->nr_vring vector
> >>>> for config interrupt */
> >>>> + config_vector = vf->nr_vring;
> >>>> +
> >>>> + if (vf->msix_vector_status ==
MSIX_VECTOR_SHARED_VQ_AND_CONFIG)
> >>>> + /* vector 0 for vqs and 1 for config interrupt */
> >>>> + config_vector = 1;
> >>>> +
> >>>> snprintf(vf->config_msix_name, 256,
"ifcvf[%s]-config\n",
> >>>> pci_name(pdev));
> >>>> - vector = 0;
> >>>> - vf->config_irq = pci_irq_vector(pdev, vector);
> >>>> + vf->config_irq = pci_irq_vector(pdev,
config_vector);
> >>>> ret = devm_request_irq(&pdev->dev,
vf->config_irq,
> >>>> ifcvf_config_changed, 0,
> >>>> vf->config_msix_name, vf);
> >>>> if (ret) {
> >>>> IFCVF_ERR(pdev, "Failed to request config
irq\n");
> >>>> + ifcvf_free_vq_irq(adapter, vf->nr_vring);
> >>>> return ret;
> >>>> }
> >>>> - for (i = 0; i < vf->nr_vring; i++) {
> >>>> - snprintf(vf->vring[i].msix_name, 256,
"ifcvf[%s]-%d\n",
> >>>> - pci_name(pdev), i);
> >>>> - vector = i + IFCVF_MSI_QUEUE_OFF;
> >>>> - irq = pci_irq_vector(pdev, vector);
> >>>> - ret = devm_request_irq(&pdev->dev, irq,
> >>>> - ifcvf_intr_handler, 0,
> >>>> - vf->vring[i].msix_name,
> >>>> - &vf->vring[i]);
> >>>> - if (ret) {
> >>>> - IFCVF_ERR(pdev,
> >>>> - "Failed to request irq for vq
%d\n", i);
> >>>> - ifcvf_free_irq(adapter, i);
> >>>> + ifcvf_set_config_vector(vf, config_vector);
> >>>> - return ret;
> >>>> - }
> >>>> + return 0;
> >>>> +}
> >>>> +
> >>>> +static int ifcvf_request_irq(struct ifcvf_adapter
*adapter)
> >>>> +{
> >>>
> >>> As replied above, I think having two modes should be
sufficient and the
> >>> code could be greatly simplified.
> >> Do you mean if we don't get enough vectors, just use only one
vector for the
> >> vqs and config changes? I guess this
> >> only works if ISR work for MSIX as we expects, or we may waste
some time in
> >> the device config space.
Ok, I think I got you here. It's better to document this in the change log.
Thanks
> >>
> >> Thanks,
> >> Zhu Lingshan
> >>> Thanks
> >>>
> >>>
> >>>> + struct ifcvf_hw *vf = &adapter->vf;
> >>>> + int nvectors, ret, max_intr;
> >>>> - vf->vring[i].irq = irq;
> >>>> + nvectors = ifcvf_alloc_vectors(adapter);
> >>>> + if (!(nvectors > 0))
> >>>> + return nvectors;
> >>>> +
> >>>> + vf->msix_vector_status =
MSIX_VECTOR_PER_VQ_AND_CONFIG;
> >>>> + max_intr = vf->nr_vring + 1;
> >>>> + if (nvectors < max_intr)
> >>>> + vf->msix_vector_status =
MSIX_VECTOR_SHARED_VQ_AND_CONFIG;
> >>>> +
> >>>> + if (nvectors == 1) {
> >>>> + vf->msix_vector_status =
MSIX_VECTOR_DEV_SHARED;
> >>>> + ret = ifcvf_request_dev_shared_irq(adapter);
> >>>> +
> >>>> + return ret;
> >>>> }
> >>>> + ret = ifcvf_request_vq_irq(adapter);
> >>>> + if (ret)
> >>>> + return ret;
> >>>> +
> >>>> + ret = ifcvf_request_config_irq(adapter);
> >>>> +
> >>>> + if (ret)
> >>>> + return ret;
> >>>> +
> >>>> return 0;
> >>>> }
> >>>> @@ -441,7 +611,10 @@ static int
ifcvf_vdpa_get_vq_irq(struct
> >>>> vdpa_device *vdpa_dev,
> >>>> {
> >>>> struct ifcvf_hw *vf = vdpa_to_vf(vdpa_dev);
> >>>> - return vf->vring[qid].irq;
> >>>> + if (vf->vqs_shared_irq < 0)
> >>>> + return vf->vring[qid].irq;
> >>>> + else
> >>>> + return -EINVAL;
> >>>> }
> >>>> static struct vdpa_notification_area
> >>>> ifcvf_get_vq_notification(struct vdpa_device *vdpa_dev,
> >>> _______________________________________________
> >>> Virtualization mailing list
> >>> Virtualization at lists.linux-foundation.org
> >>>
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
>