Hi List, I have 2 Pc Engines APU's. They have been running 10.x and 11.0/1 without any issues for quite some time now. I've updated the APU1 to 11.2 without an problems. The APU2 however throws thousands of mmc0: Card at relative address 1 failed to select and hundreds of mmc0: CMD7 failed, RESULT: 1 errors in the process of updating it to 11.2 (after the reboot and issueing the "freebsd-update install" command again). After a few minutes of uptime it sometimes reboots again. First I thought the sdhc card was to blame and restored a backup from 11.1 , on a new card but the same problems are induced every time I try to upgrade to 11.2 :( I've mounted the sdhc card on another FreeBSD machine and did and performed fsck prior to booting 11.2 but that doesn't prevent the io errors. I'm wondering: has anybody managed to run 11.2? successfully on a Pc Engines APU2 (from a sdhc card) yet? Or could somebody perhaps suggest a way to debug this issue further? Any feedback appreciated :) Ruben
On 13/07/2018 18:46, Ruben wrote:> I have 2 Pc Engines APU's. They have been running 10.x and 11.0/1 > without any issues for quite some time now. I've updated the APU1 to > 11.2 without an problems. The APU2 however throws thousands of > > First I thought the sdhc card was to blame and restored a backup from > 11.1 , on a new card but the same problems are induced every time I > try to upgrade to 11.2 :( I've mounted the sdhc card on another > FreeBSD machine and did and performed fsck prior to booting 11.2 but > that doesn't prevent the io errors. > > I'm wondering: has anybody managed to run 11.2? successfully on a Pc > Engines APU2 (from a sdhc card) yet? Or could somebody perhaps suggest > a way to debug this issue further?This probably isn't much use to you, but I'm running FreeBSD 11-Stable on two APU2s. But I'm booting from SSD, not SDHC. No problems here. Graham