freebsd stable - Dec 2016 - camcontrol rescan seems to be broken

Hi,

could anyone tell me where am I wrong:

# camcontrol rescan all
camcontrol: CAMIOCOMMAND ioctl failed: Invalid argument
# uname -U
1100122
# uname -K
1100122
# uname -a
FreeBSD bsdrookie.norma.com. 11.0-RELEASE-p5 FreeBSD 11.0-RELEASE-p5 #0
r310364: Wed Dec 21 19:03:58 YEKT 2016    
emz at bsdrookie.norma.com.:/usr/obj/usr/src/sys/BSDROOKIE  amd64

# camcontrol devlist
<ST1000DM003-1CH162 CC46>          at scbus0 target 0 lun 0 (pass0,ada0)
<ST32000542AS CC34>                at scbus1 target 0 lun 0 (pass1,ada1)
<ST2000DM001-1CH164 CC24>          at scbus2 target 0 lun 0 (pass2,ada2)
<WDC WD5003ABYX-01WERA0 01.01S01>  at scbus3 target 0 lun 0 (pass3,ada3)
<ATAPI iHAS124   W HL03>           at scbus4 target 0 lun 0 (cd0,pass4)
<AHCI SGPIO Enclosure 1.00 0001>   at scbus5 target 0 lun 0 (pass5,ses0)
<SanDisk Cruzer Fit 1.26>          at scbus6 target 0 lun 0 (da0,pass6)

# egrep 'ahci0|ada' /var/run/dmesg.boot
ahci0: <Intel Panther Point AHCI SATA controller> port
0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f
mem 0xf7202000-0xf72027ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC46> ATA8-ACS SATA 3.x device
ada0: Serial Number Z1D45ETV
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST32000542AS CC34> ATA8-ACS SATA 2.x device
ada1: Serial Number 5XW0K4AP
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <ST2000DM001-1CH164 CC24> ATA8-ACS SATA 3.x device
ada2: Serial Number Z1E2SLEV
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <WDC WD5003ABYX-01WERA0 01.01S01> ATA8-ACS SATA 2.x device
ada3: Serial Number WD-WMAYP0516506
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 476940MB (976773168 512 byte sectors)
GEOM: ada3: the primary GPT table is corrupt or invalid.
GEOM: ada3: using the secondary instead -- recovery strongly advised.
GEOM_ELI: Device ada2p5.eli created.
ahci0: <Intel Panther Point AHCI SATA controller> port
0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f
mem 0xf7202000-0xf72027ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC46> ATA8-ACS SATA 3.x device
ada0: Serial Number Z1D45ETV
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST32000542AS CC34> ATA8-ACS SATA 2.x device
ada1: Serial Number 5XW0K4AP
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <ST2000DM001-1CH164 CC24> ATA8-ACS SATA 3.x device
ada2: Serial Number Z1E2SLEV
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <WDC WD5003ABYX-01WERA0 01.01S01> ATA8-ACS SATA 2.x device
ada3: Serial Number WD-WMAYP0516506
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 476940MB (976773168 512 byte sectors)

Thanks.
Eugene.

Hi.

On 22.12.2016 11:51, Eugene M. Zheganin wrote:
> Hi,
>
> could anyone tell me where am I wrong:
>
> # camcontrol rescan all
> camcontrol: CAMIOCOMMAND ioctl failed: Invalid argument
> # uname -U
> 1100122
> # uname -K
> 1100122
> # uname -a
> FreeBSD bsdrookie.norma.com. 11.0-RELEASE-p5 FreeBSD 11.0-RELEASE-p5 #0
> r310364: Wed Dec 21 19:03:58 YEKT 2016
> emz at bsdrookie.norma.com.:/usr/obj/usr/src/sys/BSDROOKIE  amd64
>
Furthermore, there's definitely something wrong on my machine, because 
smartctl complains too:

# smartctl -a /dev/ada1
smartctl 6.4 2015-06-04 r4109 [FreeBSD 11.0-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

error sending CAMIOCOMMAND ioctl: Inappropriate ioctl for device

# smartctl -a /dev/ada0
smartctl 6.4 2015-06-04 r4109 [FreeBSD 11.0-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

error sending CAMIOCOMMAND ioctl: Inappropriate ioctl for device
Unable to get CAM device list
/dev/ada0: Unable to detect device type
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

ktrace part, if it will help:

[...]
   4291 smartctl NAMI  "/dev/xpt0"
   4291 smartctl RET   openat 3
   4291 smartctl CALL  ioctl(0x3,0xc4d81802,0x7fffffffa978)
   4291 smartctl RET   ioctl -1 errno 25 Inappropriate ioctl for device

Does anyone have an idea on how to fix things back to normal ?

Thanks.