Hi all, while investigating a watchdog timeout problem (on FreeBSD-10.1-stable r276295) I noticed "ghost" queues consuming interrupts with igb(4)[82576] if igb(4) is member of lagg(4) (laggproto loadbalance lagghash l2). Mysteriously only sometimes (1 of 2 runs). Sending machine has only one ssh session open, where I do the following: 'dd if=/dev/zero | nc vegashare 3333' (of course on vegashare is a listener [nc -l vegashare 3333 > /dev/null]) I'm transfering 123.5*10^6 Bytes/sec and on the sender, systat reports: 2682 igb0:que 0 (1 of 4 queues causes moderate irq load hw.igb.aim=1, otherhise it were 16k irqs/s, nothing on the other 3 queues) But roughly every second run, I see a another queue consuming much more irqs/s while transferring exactly the same at exactly the same speed: 7740 igb0:que 0 2640 igb0:que 3 Here's again one queue with 2.6k irqs/s, but another one with 7.7k irqs/s which I can't understand what this is doing. It's useless for sure, because with only one queue I get the same payload transported on the same hardware with the same speed and 3 queues idle? I removed lagg(4) from the party and the 2nd queue hasn't showed up for at least 20 test runs. So I guess it's caused by lagg(4). Does anybody have an explanation for this? Thanks, -Harry -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 196 bytes Desc: OpenPGP digital signature URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20150116/fbe7c520/attachment.sig>
Harald Schmalzbauer
2015-Jan-18 12:11 UTC
sonewconn: pcb 0x…: Listen queue overflow [Was: Re: lagg(8) causes ghost queue with igb(4)]
Bez?glich Harald Schmalzbauer's Nachricht vom 16.01.2015 20:12 (localtime):> Hi all, > > while investigating a watchdog timeout problem (on FreeBSD-10.1-stable > r276295) I noticed "ghost" queues consuming interrupts with > igb(4)[82576] if igb(4) is member of lagg(4) (laggproto loadbalance > lagghash l2). Mysteriously only sometimes (1 of 2 runs). > > Sending machine has only one ssh session open, where I do the following: > 'dd if=/dev/zero | nc vegashare 3333' (of course on vegashare is a > listener [nc -l vegashare 3333 > /dev/null]) > > I'm transfering 123.5*10^6 Bytes/sec and on the sender, systat reports: > 2682 igb0:que 0 (1 of 4 queues causes moderate irq load hw.igb.aim=1, > otherhise it were 16k irqs/s, nothing on the other 3 queues) > > But roughly every second run, I see a another queue consuming much more > irqs/s while transferring exactly the same at exactly the same speed: > 7740 igb0:que 0 > 2640 igb0:que 3 > > Here's again one queue with 2.6k irqs/s, but another one with 7.7k > irqs/s which I can't understand what this is doing. It's useless for > sure, because with only one queue I get the same payload transported on > the same hardware with the same speed and 3 queues idle?I noticed another mysterium, at least for me. I'd highly appreciate if somebody could give me a hint how I can understand the following lines sonewconn: pcb 0xfffff801b85907a8: Listen queue overflow: 151 already in queue awaiting acceptance (1 occurrences) sonewconn: pcb 0xfffff801b85907a8: Listen queue overflow: 151 already in queue awaiting acceptance (220 occurrences) I have never seen them before and I guess it's related to my other queue mysterium. They occured not during tests, so not during artificial (high) load, but regular low avarage load. Thanks in advance, -Harry -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 196 bytes Desc: OpenPGP digital signature URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20150118/cfa520ae/attachment.sig>