thr3ads.net - asterisk users - [asterisk-users] HELP! I can't get my Cisco CP-7960G IP hardphone to register on my Asterisk VoIP IP PBX SIP Server with FreePBX GUI [Dec 2020]

If this information is useful, please help other people find it:
Share via:

Turritopsis Dohrnii Teo En Ming

2020-Dec-22 09:42 UTC

[asterisk-users] HELP! I can't get my Cisco CP-7960G IP hardphone to register on my Asterisk VoIP IP PBX SIP Server with FreePBX GUI

Good day from Singapore,

I seem to have found the solution at FreePBX community forums. Please 
check out the following discussion thread.

Discussion Thread: Cisco 7940 registration problem RESOLVED
Link: 
https://community.freepbx.org/t/cisco-7940-registration-problem-resolved/30285

But I don't understand very well what users at this discussion thread 
are talking about. Can someone help me understand better after reading 
through the above discussion thread?

For your information, I am using PJSIP extension instead of CHAN_SIP 
extension.

I am planning to work on my Cisco 7960 IP phone registration problem 
this coming Christmas 2020 weekends.

Thank you very much for your kind assistance.




On 2020-12-21 09:58, Duncan Turnbull wrote:> Hi there
> 
> I would normally highlight the part but the email is so long I thought
> I would just note what I can see
> 
> It appears the Cisco is downloading files.
> None of the SIP traces show the IP of the phone of the extension
> 
> Your proxy is at 192.168.1.9
> Your phone is at 192.168.1.130
> 
> These are the details you want the phone to pickup
> line1_name: "1600"
> line1_shortname: "TEO EN MING"
> line1_displayname: "TURRITOPSIS DOHRNII TEO EN MING"
> line1_authname: "1600"
> line1_password: "IP Phone Extension Password"
> 
>  I don't see any registration attempts from your phone.
> 
> The first thing is to use the phone screen display to check if it
> actually has picked up the settings.
> To unlock the Cisco SIP IP phone, press **#
> 
> You can also telnet to the phone usually cisco as password, and look
> at logs. Its quite possible some of your config files are not quite
> right. If they were all wrong the Cisco would keep trying to TFTP the
> files.
> 
> This is an old SIPDefault.cnf I used to use in NZ
> ===============================================> 
> ; sip default configuration file
> #Image Version
> image_version:P0S3-08-6-00 ;
> #Proxy server address
> proxy1_address: 10.12.41.1 ;
> proxy_register: 1;
> logo_url: "http://10.12.41.1/Logo.bmp"                    ; URL
for
> branding logo to be used on phone display
> time_format: 0 ;
> preferred_codec: g711alaw ;
> sntp_mode: unicast ;
> dial_template: dialplan
> sntp_server: 10.12.41.1 ;
> messages_uri: "*97"
> time_zone : NZST
> dst_auto_adjust : 1
> dst_offset : 01
> dst_start_month : September
> dst_start_day : 29
> dst_start_time : 02:00
> dst_stop_month : April
> dst_stop_day : 6
> dst_stop_time : 02:00
> ================================================> 
> This is a SIP Phone template - you can compare settings and notes on
> the settings
> # SIP Configuration Generic File (start)
> 
> ================================================> # Proxy Server
> proxy1_address: "10.12.41.1"
> 
> # Line 1 Settings
> line1_name: "EXTN"                     ; Line 1 Extension\User ID
> line1_shortname: "0NXXXXXXX"           ; Line 1 Short Name
> line1_displayname: "0NXXXXXXX"           ; Line 1 Display Name
> line1_authname: "EXTN"         ; Line 1 Registration
Authentication
> line1_password: "6gs72ha9"         ; Line 1 Registration Password
> phone_label: "Company Limited"    ; no effect on SIP messaging
> 
> # Line 2 Settings
> line2_name: ""                          ; Line 2 Extension\User
ID
> line2_displayname: ""                   ; Line 2 Display Name
> line2_authname: "UNPROVISIONED"         ; Line 2 Registration 
> Authentication
> line2_password: "UNPROVISIONED"         ; Line 2 Registration
Password
> 
> # Line 3 Settings
> line3_name: ""                          ; Line 3 Extension\User
ID
> line3_displayname: ""                   ; Line 3 Display Name
> line3_authname: "UNPROVISIONED"         ; Line 3 Registration 
> Authentication
> line3_password: "UNPROVISIONED"         ; Line 3 Registration
Password
> 
> # Line 4 Settings
> line4_name: ""                          ; Line 4 Extension\User
ID
> line4_displayname: ""                   ; Line 4 Display Name
> line4_authname: "UNPROVISIONED"         ; Line 4 Registration 
> Authentication
> line4_password: "UNPROVISIONED"         ; Line 4 Registration
Password
> 
> # Line 5 Settings
> line5_name: ""                          ; Line 5 Extension\User
ID
> line5_displayname: ""                   ; Line 5 Display Name
> line5_authname: "UNPROVISIONED"         ; Line 5 Registration 
> Authentication
> line5_password: "UNPROVISIONED"         ; Line 5 Registration
Password
> 
> # Line 6 Settings
> line6_name: ""                          ; Line 6 Extension\User
ID
> line6_displayname: ""                   ; Line 6 Display Name
> line6_authname: "UNPROVISIONE"         ; Line 6 Registration 
> Authentication
> line6_password: "UNPROVISIONE"         ; Line 6 Registration
Password
> 
> # Emergency Proxy info
> proxy_emergency: ""
> proxy_emergency_port: "5060"
> 
> # Backup Proxy info
> proxy_backup: ""
> proxy_backup_port: "5060"
> 
> # Outbound Proxy info
> outbound_proxy: ""
> outbound_proxy_port: "5060"
> 
> # NAT/Firewall Traversal
> nat_enable: "0"
> nat_address: ""
> voip_control_port: "5060"
> start_media_port: "10000"
> end_media_port:  "20000"
> nat_received_processing: "0"
> 
> # Phone Label (Text desired to be displayed in upper right corner)
> phone_label: "Name's phone"            ; Has no effect on SIP
messaging
> 
> # Time Zone phone will reside in
> time_zone: NZST
> time_format: "D/M/Ya"
> # Telnet Level (enable or disable the ability to telnet into this phone
> telnet_level: "2"      ; 0-Disabled (default), 1-Enabled,
2-Privileged
> 
> # Phone prompt/password for telnet/console session
> phone_prompt: ""                              ; Telnet/Console
Prompt
> phone_password: "cisco"                          ; Telnet/Console
> Password
> 
> # Enable_VAD (1-enabled, 0-disabled)
> enable_vad: "0"
> 
> # Network Media Type (auto, full100, full10, half100, half10)
> network_media_type: "auto"
> user_info: none
> 
> # URL for external Directory location
> directory_url: "http://10.12.41.1/directory.html"
> ================================================> 
> I would then recommend tcpdump to monitor traffic coming from
> 192.168.1.130  Tcpdump is an important tool to learn to use and you
> can look at all traffic coming from the phone, perhaps its using TCP
> instead of UDP?
> 
> Have you got a copy of the Cisco SIP IP Phone 7960 Administrator Guide
> - it should be on the web somewhere
> 
> Good luck, it will take a little time to get familiar with your
> environment but its important to put the time in to work out what
> means what
> 
> Cheers Duncan
-- 
-----BEGIN EMAIL SIGNATURE-----

The Gospel for all Targeted Individuals (TIs):

[The New York Times] Microwave Weapons Are Prime Suspect in Ills of
U.S. Embassy Workers

Link: 
https://www.nytimes.com/2018/09/01/science/sonic-attack-cuba-microwave.html

********************************************************************************************

Singaporean Targeted Individual Mr. Turritopsis Dohrnii Teo En Ming's 
Academic
Qualifications as at 14 Feb 2019 and refugee seeking attempts at the 
United Nations Refugee Agency Bangkok (21 Mar 2017), in Taiwan (5 Aug 
2019) and Australia (25 Dec 2019 to 9 Jan 2020):

[1] https://tdtemcerts.wordpress.com/

[2] https://tdtemcerts.blogspot.sg/

[3] https://www.scribd.com/user/270125049/Teo-En-Ming

-----END EMAIL SIGNATURE-----

Duncan Turnbull

2020-Dec-22 20:29 UTC

head link

[asterisk-users] HELP! I can't get my Cisco CP-7960G IP hardphone to register on my Asterisk VoIP IP PBX SIP Server with FreePBX GUI

Hi there

That answer includes using tcpdump to check for SIP packets and examine the
register packet. At this point you have no SIP packets coming from your
phone so you are not upto that stage yet.

You need to know why there are no SIP packets coming. My guess is your
config files have a typo in them. You can modify the ones I sent to see if
they work for you. You do need to validate your configs. I recommend telnet
to the phone, and checking the display settings to see if it has picked up
the settings. Equally check the phone logs. It will tell you which files
have errors.

Until you get the settings loaded correctly nothing else will matter

Enjoy your break. If you want to use Voip you should definitely spend some
time to learn tcpdump. If you want to use Cisco you need to be able to
understand the configs yourself and get as much info from the phone as
possible. Not hard but it takes a little bit of time.

Cheers Duncan

On Tue, Dec 22, 2020 at 10:43 PM Turritopsis Dohrnii Teo En Ming <
ceo at teo-en-ming.com> wrote:
> Good day from Singapore,
>
> I seem to have found the solution at FreePBX community forums. Please
> check out the following discussion thread.
>
> Discussion Thread: Cisco 7940 registration problem RESOLVED
> Link:
>
>
https://community.freepbx.org/t/cisco-7940-registration-problem-resolved/30285
>
> But I don't understand very well what users at this discussion thread
> are talking about. Can someone help me understand better after reading
> through the above discussion thread?
>
> For your information, I am using PJSIP extension instead of CHAN_SIP
> extension.
>
> I am planning to work on my Cisco 7960 IP phone registration problem
> this coming Christmas 2020 weekends.
>
> Thank you very much for your kind assistance.
>
>
>
>
> On 2020-12-21 09:58, Duncan Turnbull wrote:
> > Hi there
> >
> > I would normally highlight the part but the email is so long I thought
> > I would just note what I can see
> >
> > It appears the Cisco is downloading files.
> > None of the SIP traces show the IP of the phone of the extension
> >
> > Your proxy is at 192.168.1.9
> > Your phone is at 192.168.1.130
> >
> > These are the details you want the phone to pickup
> > line1_name: "1600"
> > line1_shortname: "TEO EN MING"
> > line1_displayname: "TURRITOPSIS DOHRNII TEO EN MING"
> > line1_authname: "1600"
> > line1_password: "IP Phone Extension Password"
> >
> >  I don't see any registration attempts from your phone.
> >
> > The first thing is to use the phone screen display to check if it
> > actually has picked up the settings.
> > To unlock the Cisco SIP IP phone, press **#
> >
> > You can also telnet to the phone usually cisco as password, and look
> > at logs. Its quite possible some of your config files are not quite
> > right. If they were all wrong the Cisco would keep trying to TFTP the
> > files.
> >
> > This is an old SIPDefault.cnf I used to use in NZ
> > ===============================================> >
> > ; sip default configuration file
> > #Image Version
> > image_version:P0S3-08-6-00 ;
> > #Proxy server address
> > proxy1_address: 10.12.41.1 ;
> > proxy_register: 1;
> > logo_url: "http://10.12.41.1/Logo.bmp"                    ;
URL for
> > branding logo to be used on phone display
> > time_format: 0 ;
> > preferred_codec: g711alaw ;
> > sntp_mode: unicast ;
> > dial_template: dialplan
> > sntp_server: 10.12.41.1 ;
> > messages_uri: "*97"
> > time_zone : NZST
> > dst_auto_adjust : 1
> > dst_offset : 01
> > dst_start_month : September
> > dst_start_day : 29
> > dst_start_time : 02:00
> > dst_stop_month : April
> > dst_stop_day : 6
> > dst_stop_time : 02:00
> > ================================================> >
> > This is a SIP Phone template - you can compare settings and notes on
> > the settings
> > # SIP Configuration Generic File (start)
> >
> > ================================================> > # Proxy
Server
> > proxy1_address: "10.12.41.1"
> >
> > # Line 1 Settings
> > line1_name: "EXTN"                     ; Line 1
Extension\User ID
> > line1_shortname: "0NXXXXXXX"           ; Line 1 Short Name
> > line1_displayname: "0NXXXXXXX"           ; Line 1 Display
Name
> > line1_authname: "EXTN"         ; Line 1 Registration
Authentication
> > line1_password: "6gs72ha9"         ; Line 1 Registration
Password
> > phone_label: "Company Limited"    ; no effect on SIP
messaging
> >
> > # Line 2 Settings
> > line2_name: ""                          ; Line 2
Extension\User ID
> > line2_displayname: ""                   ; Line 2 Display
Name
> > line2_authname: "UNPROVISIONED"         ; Line 2
Registration
> > Authentication
> > line2_password: "UNPROVISIONED"         ; Line 2
Registration Password
> >
> > # Line 3 Settings
> > line3_name: ""                          ; Line 3
Extension\User ID
> > line3_displayname: ""                   ; Line 3 Display
Name
> > line3_authname: "UNPROVISIONED"         ; Line 3
Registration
> > Authentication
> > line3_password: "UNPROVISIONED"         ; Line 3
Registration Password
> >
> > # Line 4 Settings
> > line4_name: ""                          ; Line 4
Extension\User ID
> > line4_displayname: ""                   ; Line 4 Display
Name
> > line4_authname: "UNPROVISIONED"         ; Line 4
Registration
> > Authentication
> > line4_password: "UNPROVISIONED"         ; Line 4
Registration Password
> >
> > # Line 5 Settings
> > line5_name: ""                          ; Line 5
Extension\User ID
> > line5_displayname: ""                   ; Line 5 Display
Name
> > line5_authname: "UNPROVISIONED"         ; Line 5
Registration
> > Authentication
> > line5_password: "UNPROVISIONED"         ; Line 5
Registration Password
> >
> > # Line 6 Settings
> > line6_name: ""                          ; Line 6
Extension\User ID
> > line6_displayname: ""                   ; Line 6 Display
Name
> > line6_authname: "UNPROVISIONE"         ; Line 6 Registration
> > Authentication
> > line6_password: "UNPROVISIONE"         ; Line 6 Registration
Password
> >
> > # Emergency Proxy info
> > proxy_emergency: ""
> > proxy_emergency_port: "5060"
> >
> > # Backup Proxy info
> > proxy_backup: ""
> > proxy_backup_port: "5060"
> >
> > # Outbound Proxy info
> > outbound_proxy: ""
> > outbound_proxy_port: "5060"
> >
> > # NAT/Firewall Traversal
> > nat_enable: "0"
> > nat_address: ""
> > voip_control_port: "5060"
> > start_media_port: "10000"
> > end_media_port:  "20000"
> > nat_received_processing: "0"
> >
> > # Phone Label (Text desired to be displayed in upper right corner)
> > phone_label: "Name's phone"            ; Has no effect
on SIP messaging
> >
> > # Time Zone phone will reside in
> > time_zone: NZST
> > time_format: "D/M/Ya"
> > # Telnet Level (enable or disable the ability to telnet into this
phone
> > telnet_level: "2"      ; 0-Disabled (default), 1-Enabled,
2-Privileged
> >
> > # Phone prompt/password for telnet/console session
> > phone_prompt: ""                              ;
Telnet/Console Prompt
> > phone_password: "cisco"                          ;
Telnet/Console
> > Password
> >
> > # Enable_VAD (1-enabled, 0-disabled)
> > enable_vad: "0"
> >
> > # Network Media Type (auto, full100, full10, half100, half10)
> > network_media_type: "auto"
> > user_info: none
> >
> > # URL for external Directory location
> > directory_url: "http://10.12.41.1/directory.html"
> > ================================================> >
> > I would then recommend tcpdump to monitor traffic coming from
> > 192.168.1.130  Tcpdump is an important tool to learn to use and you
> > can look at all traffic coming from the phone, perhaps its using TCP
> > instead of UDP?
> >
> > Have you got a copy of the Cisco SIP IP Phone 7960 Administrator Guide
> > - it should be on the web somewhere
> >
> > Good luck, it will take a little time to get familiar with your
> > environment but its important to put the time in to work out what
> > means what
> >
> > Cheers Duncan
>
> --
> -----BEGIN EMAIL SIGNATURE-----
>
> The Gospel for all Targeted Individuals (TIs):
>
> [The New York Times] Microwave Weapons Are Prime Suspect in Ills of
> U.S. Embassy Workers
>
> Link:
> https://www.nytimes.com/2018/09/01/science/sonic-attack-cuba-microwave.html
>
>
>
********************************************************************************************
>
> Singaporean Targeted Individual Mr. Turritopsis Dohrnii Teo En Ming's
> Academic
> Qualifications as at 14 Feb 2019 and refugee seeking attempts at the
> United Nations Refugee Agency Bangkok (21 Mar 2017), in Taiwan (5 Aug
> 2019) and Australia (25 Dec 2019 to 9 Jan 2020):
>
> [1] https://tdtemcerts.wordpress.com/
>
> [2] https://tdtemcerts.blogspot.sg/
>
> [3] https://www.scribd.com/user/270125049/Teo-En-Ming
>
> -----END EMAIL SIGNATURE-----
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at:
> https://community.asterisk.org/
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20201223/b3e809dc/attachment.html>

asterisk users - Dec 2020 - HELP! I can't get my Cisco CP-7960G IP hardphone to register on my Asterisk VoIP IP PBX SIP Server with FreePBX GUI

[asterisk-users] HELP! I can't get my Cisco CP-7960G IP hardphone to register on my Asterisk VoIP IP PBX SIP Server with FreePBX GUI

[asterisk-users] HELP! I can't get my Cisco CP-7960G IP hardphone to register on my Asterisk VoIP IP PBX SIP Server with FreePBX GUI