Duncan Turnbull
2020-Dec-21 01:58 UTC
[asterisk-users] HELP! I can't get my Cisco CP-7960G IP hardphone to register on my Asterisk VoIP IP PBX SIP Server with FreePBX GUI
Hi there I would normally highlight the part but the email is so long I thought I would just note what I can see It appears the Cisco is downloading files. None of the SIP traces show the IP of the phone of the extension Your proxy is at 192.168.1.9 Your phone is at 192.168.1.130 These are the details you want the phone to pickup line1_name: "1600" line1_shortname: "TEO EN MING" line1_displayname: "TURRITOPSIS DOHRNII TEO EN MING" line1_authname: "1600" line1_password: "IP Phone Extension Password" I don't see any registration attempts from your phone. The first thing is to use the phone screen display to check if it actually has picked up the settings. To unlock the Cisco SIP IP phone, press **# You can also telnet to the phone usually cisco as password, and look at logs. Its quite possible some of your config files are not quite right. If they were all wrong the Cisco would keep trying to TFTP the files. This is an old SIPDefault.cnf I used to use in NZ =============================================== ; sip default configuration file #Image Version image_version:P0S3-08-6-00 ; #Proxy server address proxy1_address: 10.12.41.1 ; proxy_register: 1; logo_url: "http://10.12.41.1/Logo.bmp" ; URL for branding logo to be used on phone display time_format: 0 ; preferred_codec: g711alaw ; sntp_mode: unicast ; dial_template: dialplan sntp_server: 10.12.41.1 ; messages_uri: "*97" time_zone : NZST dst_auto_adjust : 1 dst_offset : 01 dst_start_month : September dst_start_day : 29 dst_start_time : 02:00 dst_stop_month : April dst_stop_day : 6 dst_stop_time : 02:00 ================================================ This is a SIP Phone template - you can compare settings and notes on the settings # SIP Configuration Generic File (start) ================================================# Proxy Server proxy1_address: "10.12.41.1" # Line 1 Settings line1_name: "EXTN" ; Line 1 Extension\User ID line1_shortname: "0NXXXXXXX" ; Line 1 Short Name line1_displayname: "0NXXXXXXX" ; Line 1 Display Name line1_authname: "EXTN" ; Line 1 Registration Authentication line1_password: "6gs72ha9" ; Line 1 Registration Password phone_label: "Company Limited" ; no effect on SIP messaging # Line 2 Settings line2_name: "" ; Line 2 Extension\User ID line2_displayname: "" ; Line 2 Display Name line2_authname: "UNPROVISIONED" ; Line 2 Registration Authentication line2_password: "UNPROVISIONED" ; Line 2 Registration Password # Line 3 Settings line3_name: "" ; Line 3 Extension\User ID line3_displayname: "" ; Line 3 Display Name line3_authname: "UNPROVISIONED" ; Line 3 Registration Authentication line3_password: "UNPROVISIONED" ; Line 3 Registration Password # Line 4 Settings line4_name: "" ; Line 4 Extension\User ID line4_displayname: "" ; Line 4 Display Name line4_authname: "UNPROVISIONED" ; Line 4 Registration Authentication line4_password: "UNPROVISIONED" ; Line 4 Registration Password # Line 5 Settings line5_name: "" ; Line 5 Extension\User ID line5_displayname: "" ; Line 5 Display Name line5_authname: "UNPROVISIONED" ; Line 5 Registration Authentication line5_password: "UNPROVISIONED" ; Line 5 Registration Password # Line 6 Settings line6_name: "" ; Line 6 Extension\User ID line6_displayname: "" ; Line 6 Display Name line6_authname: "UNPROVISIONE" ; Line 6 Registration Authentication line6_password: "UNPROVISIONE" ; Line 6 Registration Password # Emergency Proxy info proxy_emergency: "" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "" outbound_proxy_port: "5060" # NAT/Firewall Traversal nat_enable: "0" nat_address: "" voip_control_port: "5060" start_media_port: "10000" end_media_port: "20000" nat_received_processing: "0" # Phone Label (Text desired to be displayed in upper right corner) phone_label: "Name's phone" ; Has no effect on SIP messaging # Time Zone phone will reside in time_zone: NZST time_format: "D/M/Ya" # Telnet Level (enable or disable the ability to telnet into this phone telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged # Phone prompt/password for telnet/console session phone_prompt: "" ; Telnet/Console Prompt phone_password: "cisco" ; Telnet/Console Password # Enable_VAD (1-enabled, 0-disabled) enable_vad: "0" # Network Media Type (auto, full100, full10, half100, half10) network_media_type: "auto" user_info: none # URL for external Directory location directory_url: "http://10.12.41.1/directory.html" ================================================ I would then recommend tcpdump to monitor traffic coming from 192.168.1.130 Tcpdump is an important tool to learn to use and you can look at all traffic coming from the phone, perhaps its using TCP instead of UDP? Have you got a copy of the Cisco SIP IP Phone 7960 Administrator Guide - it should be on the web somewhere Good luck, it will take a little time to get familiar with your environment but its important to put the time in to work out what means what Cheers Duncan
Turritopsis Dohrnii Teo En Ming
2020-Dec-22 09:42 UTC
[asterisk-users] HELP! I can't get my Cisco CP-7960G IP hardphone to register on my Asterisk VoIP IP PBX SIP Server with FreePBX GUI
Good day from Singapore, I seem to have found the solution at FreePBX community forums. Please check out the following discussion thread. Discussion Thread: Cisco 7940 registration problem RESOLVED Link: https://community.freepbx.org/t/cisco-7940-registration-problem-resolved/30285 But I don't understand very well what users at this discussion thread are talking about. Can someone help me understand better after reading through the above discussion thread? For your information, I am using PJSIP extension instead of CHAN_SIP extension. I am planning to work on my Cisco 7960 IP phone registration problem this coming Christmas 2020 weekends. Thank you very much for your kind assistance. On 2020-12-21 09:58, Duncan Turnbull wrote:> Hi there > > I would normally highlight the part but the email is so long I thought > I would just note what I can see > > It appears the Cisco is downloading files. > None of the SIP traces show the IP of the phone of the extension > > Your proxy is at 192.168.1.9 > Your phone is at 192.168.1.130 > > These are the details you want the phone to pickup > line1_name: "1600" > line1_shortname: "TEO EN MING" > line1_displayname: "TURRITOPSIS DOHRNII TEO EN MING" > line1_authname: "1600" > line1_password: "IP Phone Extension Password" > > I don't see any registration attempts from your phone. > > The first thing is to use the phone screen display to check if it > actually has picked up the settings. > To unlock the Cisco SIP IP phone, press **# > > You can also telnet to the phone usually cisco as password, and look > at logs. Its quite possible some of your config files are not quite > right. If they were all wrong the Cisco would keep trying to TFTP the > files. > > This is an old SIPDefault.cnf I used to use in NZ > ===============================================> > ; sip default configuration file > #Image Version > image_version:P0S3-08-6-00 ; > #Proxy server address > proxy1_address: 10.12.41.1 ; > proxy_register: 1; > logo_url: "http://10.12.41.1/Logo.bmp" ; URL for > branding logo to be used on phone display > time_format: 0 ; > preferred_codec: g711alaw ; > sntp_mode: unicast ; > dial_template: dialplan > sntp_server: 10.12.41.1 ; > messages_uri: "*97" > time_zone : NZST > dst_auto_adjust : 1 > dst_offset : 01 > dst_start_month : September > dst_start_day : 29 > dst_start_time : 02:00 > dst_stop_month : April > dst_stop_day : 6 > dst_stop_time : 02:00 > ================================================> > This is a SIP Phone template - you can compare settings and notes on > the settings > # SIP Configuration Generic File (start) > > ================================================> # Proxy Server > proxy1_address: "10.12.41.1" > > # Line 1 Settings > line1_name: "EXTN" ; Line 1 Extension\User ID > line1_shortname: "0NXXXXXXX" ; Line 1 Short Name > line1_displayname: "0NXXXXXXX" ; Line 1 Display Name > line1_authname: "EXTN" ; Line 1 Registration Authentication > line1_password: "6gs72ha9" ; Line 1 Registration Password > phone_label: "Company Limited" ; no effect on SIP messaging > > # Line 2 Settings > line2_name: "" ; Line 2 Extension\User ID > line2_displayname: "" ; Line 2 Display Name > line2_authname: "UNPROVISIONED" ; Line 2 Registration > Authentication > line2_password: "UNPROVISIONED" ; Line 2 Registration Password > > # Line 3 Settings > line3_name: "" ; Line 3 Extension\User ID > line3_displayname: "" ; Line 3 Display Name > line3_authname: "UNPROVISIONED" ; Line 3 Registration > Authentication > line3_password: "UNPROVISIONED" ; Line 3 Registration Password > > # Line 4 Settings > line4_name: "" ; Line 4 Extension\User ID > line4_displayname: "" ; Line 4 Display Name > line4_authname: "UNPROVISIONED" ; Line 4 Registration > Authentication > line4_password: "UNPROVISIONED" ; Line 4 Registration Password > > # Line 5 Settings > line5_name: "" ; Line 5 Extension\User ID > line5_displayname: "" ; Line 5 Display Name > line5_authname: "UNPROVISIONED" ; Line 5 Registration > Authentication > line5_password: "UNPROVISIONED" ; Line 5 Registration Password > > # Line 6 Settings > line6_name: "" ; Line 6 Extension\User ID > line6_displayname: "" ; Line 6 Display Name > line6_authname: "UNPROVISIONE" ; Line 6 Registration > Authentication > line6_password: "UNPROVISIONE" ; Line 6 Registration Password > > # Emergency Proxy info > proxy_emergency: "" > proxy_emergency_port: "5060" > > # Backup Proxy info > proxy_backup: "" > proxy_backup_port: "5060" > > # Outbound Proxy info > outbound_proxy: "" > outbound_proxy_port: "5060" > > # NAT/Firewall Traversal > nat_enable: "0" > nat_address: "" > voip_control_port: "5060" > start_media_port: "10000" > end_media_port: "20000" > nat_received_processing: "0" > > # Phone Label (Text desired to be displayed in upper right corner) > phone_label: "Name's phone" ; Has no effect on SIP messaging > > # Time Zone phone will reside in > time_zone: NZST > time_format: "D/M/Ya" > # Telnet Level (enable or disable the ability to telnet into this phone > telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged > > # Phone prompt/password for telnet/console session > phone_prompt: "" ; Telnet/Console Prompt > phone_password: "cisco" ; Telnet/Console > Password > > # Enable_VAD (1-enabled, 0-disabled) > enable_vad: "0" > > # Network Media Type (auto, full100, full10, half100, half10) > network_media_type: "auto" > user_info: none > > # URL for external Directory location > directory_url: "http://10.12.41.1/directory.html" > ================================================> > I would then recommend tcpdump to monitor traffic coming from > 192.168.1.130 Tcpdump is an important tool to learn to use and you > can look at all traffic coming from the phone, perhaps its using TCP > instead of UDP? > > Have you got a copy of the Cisco SIP IP Phone 7960 Administrator Guide > - it should be on the web somewhere > > Good luck, it will take a little time to get familiar with your > environment but its important to put the time in to work out what > means what > > Cheers Duncan-- -----BEGIN EMAIL SIGNATURE----- The Gospel for all Targeted Individuals (TIs): [The New York Times] Microwave Weapons Are Prime Suspect in Ills of U.S. Embassy Workers Link: https://www.nytimes.com/2018/09/01/science/sonic-attack-cuba-microwave.html ******************************************************************************************** Singaporean Targeted Individual Mr. Turritopsis Dohrnii Teo En Ming's Academic Qualifications as at 14 Feb 2019 and refugee seeking attempts at the United Nations Refugee Agency Bangkok (21 Mar 2017), in Taiwan (5 Aug 2019) and Australia (25 Dec 2019 to 9 Jan 2020): [1] https://tdtemcerts.wordpress.com/ [2] https://tdtemcerts.blogspot.sg/ [3] https://www.scribd.com/user/270125049/Teo-En-Ming -----END EMAIL SIGNATURE-----