thr3ads.net - samba - [Samba] samba-4.5.1 build problem [Oct 2016]

If this information is useful, please help other people find it:
Share via:

Peter Serbe

2016-Oct-26 08:21 UTC

[Samba] samba-4.5.1 build problem

Dear Samba experts, 

I tried to install the latest Samba release the way I 
did it always, i.e. starting with:

./configure --prefix=/usr/local/samba \
            --with-piddir=/usr/local/samba/var/run \
            --with-syslog \
            --with-quotas \
            --with-acl-support \
            --enable-debug \
            --enable-cups \
            --enable-selftest \
            --with-ads \
            --with-shared-modules=idmap_ad

But after a short while this stops throwing an error, 
which is totally cryptic to me

Checking for perl 5.0.0                                                         
: ok 5.24.1
Checking for perl $Config{vendorprefix}:                                        
: '/usr'
PERL_ARCH_INSTALL_DIR:                                                          
: '${LIBDIR}/perl5'
PERL_LIB_INSTALL_DIR:                                                           
: '${DATADIR}/perl5'
Traceback (most recent call last):
  File "./buildtools/bin/waf", line 76, in <module>
    Scripting.prepare(t, cwd, VERSION, wafdir)
  File
"/usr/src/samba/samba-4.5.1/third_party/waf/wafadmin/Scripting.py",
line 145, in prepare
    prepare_impl(t, cwd, ver, wafdir)
  File
"/usr/src/samba/samba-4.5.1/third_party/waf/wafadmin/Scripting.py",
line 135, in prepare_impl
    main()
  File "/usr/src/samba/samba-4.5.1/wscript", line 347, in main
    wildcard_main(wildcard_cmd)
  File "./buildtools/wafsamba/samba_wildcard.py", line 110, in
wildcard_main
    fun(ctx)
  File
"/usr/src/samba/samba-4.5.1/third_party/waf/wafadmin/Scripting.py",
line 241, in configure
    conf.sub_config([''])
  File
"/usr/src/samba/samba-4.5.1/third_party/waf/wafadmin/Configure.py",
line 237, in sub_config
    self.recurse(k, name='configure')
  File "/usr/src/samba/samba-4.5.1/third_party/waf/wafadmin/Utils.py",
line 656, in recurse
    f(self)
  File "/usr/src/samba/samba-4.5.1/wscript", line 103, in configure
    conf.SAMBA_CHECK_PERL(mandatory=True)
  File "./buildtools/wafsamba/samba_perl.py", line 52, in
SAMBA_CHECK_PERL
    perl_inc.remove('.')
ValueError: list.remove(x): x not in list

What should I do to overcome this?

Best regards
Peter

L.P.H. van Belle

2016-Oct-26 08:45 UTC

head link

[Samba] samba-4.5.1 build problem

Hai, 

Have you checked all paths are correct? 

On a running server type : 
smbd -b 

check the paths and put them in the configure also. 
See if it helps and if not post again and plese post your os also that helps..

Greetz, 

Louis

> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Peter Serbe via
> samba
> Verzonden: woensdag 26 oktober 2016 10:21
> Aan: samba at lists.samba.org
> Onderwerp: [Samba] samba-4.5.1 build problem
> 
> Dear Samba experts,
> 
> I tried to install the latest Samba release the way I
> did it always, i.e. starting with:
> 
> ./configure --prefix=/usr/local/samba \
>             --with-piddir=/usr/local/samba/var/run \
>             --with-syslog \
>             --with-quotas \
>             --with-acl-support \
>             --enable-debug \
>             --enable-cups \
>             --enable-selftest \
>             --with-ads \
>             --with-shared-modules=idmap_ad
> 
> But after a short while this stops throwing an error,
> which is totally cryptic to me
> 
> Checking for perl 5.0.0
> : ok 5.24.1
> Checking for perl $Config{vendorprefix}:
> : '/usr'
> PERL_ARCH_INSTALL_DIR:
> : '${LIBDIR}/perl5'
> PERL_LIB_INSTALL_DIR:
> : '${DATADIR}/perl5'
> Traceback (most recent call last):
>   File "./buildtools/bin/waf", line 76, in <module>
>     Scripting.prepare(t, cwd, VERSION, wafdir)
>   File
"/usr/src/samba/samba-4.5.1/third_party/waf/wafadmin/Scripting.py",
> line 145, in prepare
>     prepare_impl(t, cwd, ver, wafdir)
>   File
"/usr/src/samba/samba-4.5.1/third_party/waf/wafadmin/Scripting.py",
> line 135, in prepare_impl
>     main()
>   File "/usr/src/samba/samba-4.5.1/wscript", line 347, in main
>     wildcard_main(wildcard_cmd)
>   File "./buildtools/wafsamba/samba_wildcard.py", line 110, in
> wildcard_main
>     fun(ctx)
>   File
"/usr/src/samba/samba-4.5.1/third_party/waf/wafadmin/Scripting.py",
> line 241, in configure
>     conf.sub_config([''])
>   File
"/usr/src/samba/samba-4.5.1/third_party/waf/wafadmin/Configure.py",
> line 237, in sub_config
>     self.recurse(k, name='configure')
>   File
"/usr/src/samba/samba-4.5.1/third_party/waf/wafadmin/Utils.py",
> line 656, in recurse
>     f(self)
>   File "/usr/src/samba/samba-4.5.1/wscript", line 103, in
configure
>     conf.SAMBA_CHECK_PERL(mandatory=True)
>   File "./buildtools/wafsamba/samba_perl.py", line 52, in
SAMBA_CHECK_PERL
>     perl_inc.remove('.')
> ValueError: list.remove(x): x not in list
> 
> What should I do to overcome this?
> 
> Best regards
> Peter
> 
> 
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba

Volker Lendecke

2016-Oct-26 09:11 UTC

head link

[Samba] samba-4.5.1 build problem

Peter Serbe via samba <samba at lists.samba.org> writes:
> Dear Samba experts, 
>
> I tried to install the latest Samba release the way I 
> did it always, i.e. starting with:
That's on debian testing, right? I've seen this, but I haven't got
around it yet. It requires some deep look at waf code. In the short
term, you should use debian stable.

Sorry,

Volker

Peter Serbe

2016-Oct-26 09:31 UTC

head link

[Samba] samba-4.5.1 build problem

Dear Volker, 

[build problem...]
> That's on debian testing, right? I've seen this, but I haven't
got
> around it yet. It requires some deep look at waf code. In the short
> term, you should use debian stable.
Yes. You've got a bright crystal ball, btw. 
Since a longer time I deeply regret having gone to Stretch testing. 
Two month ago I did compile samba-4.5.0 without any problem, but 
apparently Debian testing did break something deep inside the system. 
I already migrated some of my boxes to Gentoo, but that is a long and 
painful way, too. :-( 

Thank You anyway
Peter

L.P.H. van Belle

2016-Oct-26 11:04 UTC

head link

[Samba] samba-4.5.1 build problem

Hai Peter,

If you are interested. 

I have 4.5.1 debian packages for debian Jessie, but untested atm by me.
I have next week time to test them but if you want to test them.
So let me know, i can put them online for you. 

Or if anyone else wants to test them, let me know. 


Greetz, 

Louis



> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Peter Serbe via
> samba
> Verzonden: woensdag 26 oktober 2016 11:31
> Aan: samba at lists.samba.org
> CC: vl at samba.org
> Onderwerp: Re: [Samba] samba-4.5.1 build problem
> 
> Dear Volker,
> 
> [build problem...]
> 
> > That's on debian testing, right? I've seen this, but I
haven't got
> > around it yet. It requires some deep look at waf code. In the short
> > term, you should use debian stable.
> 
> Yes. You've got a bright crystal ball, btw.
> Since a longer time I deeply regret having gone to Stretch testing.
> Two month ago I did compile samba-4.5.0 without any problem, but
> apparently Debian testing did break something deep inside the system.
> I already migrated some of my boxes to Gentoo, but that is a long and
> painful way, too. :-(
> 
> Thank You anyway
> Peter
> 
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba

Andrew Bartlett

2016-Oct-26 12:34 UTC

head link

[Samba] samba-4.5.1 build problem

On Wed, 2016-10-26 at 10:21 +0200, Peter Serbe via samba
wrote:> Dear Samba experts, 
> 
> I tried to install the latest Samba release the way I 
> did it always, i.e. starting with:
> 
> ./configure --prefix=/usr/local/samba \
>             --with-piddir=/usr/local/samba/var/run \
>             --with-syslog \
>             --with-quotas \
>             --with-acl-support \
>             --enable-debug \
>             --enable-cups \
>             --enable-selftest \
>             --with-ads \
>             --with-shared-modules=idmap_ad
> 
> But after a short while this stops throwing an error, 
> which is totally cryptic to me
> 
> Checking for perl
> 5.0.0                                                           : ok
> 5.24.1
> Checking for perl
> $Config{vendorprefix}:                                          :
> '/usr'
> PERL_ARCH_INSTALL_DIR:                                               
>              : '${LIBDIR}/perl5'
> PERL_LIB_INSTALL_DIR:                                                
>              : '${DATADIR}/perl5'
> Traceback (most recent call last):
>   File "./buildtools/bin/waf", line 76, in <module>
>     Scripting.prepare(t, cwd, VERSION, wafdir)
>   File "/usr/src/samba/samba-
> 4.5.1/third_party/waf/wafadmin/Scripting.py", line 145, in prepare
>     prepare_impl(t, cwd, ver, wafdir)
>   File "/usr/src/samba/samba-
> 4.5.1/third_party/waf/wafadmin/Scripting.py", line 135, in
> prepare_impl
>     main()
>   File "/usr/src/samba/samba-4.5.1/wscript", line 347, in main
>     wildcard_main(wildcard_cmd)
>   File "./buildtools/wafsamba/samba_wildcard.py", line 110, in
> wildcard_main
>     fun(ctx)
>   File "/usr/src/samba/samba-
> 4.5.1/third_party/waf/wafadmin/Scripting.py", line 241, in configure
>     conf.sub_config([''])
>   File "/usr/src/samba/samba-
> 4.5.1/third_party/waf/wafadmin/Configure.py", line 237, in sub_config
>     self.recurse(k, name='configure')
>   File "/usr/src/samba/samba-
> 4.5.1/third_party/waf/wafadmin/Utils.py", line 656, in recurse
>     f(self)
>   File "/usr/src/samba/samba-4.5.1/wscript", line 103, in
configure
>     conf.SAMBA_CHECK_PERL(mandatory=True)
>   File "./buildtools/wafsamba/samba_perl.py", line 52, in
> SAMBA_CHECK_PERL
>     perl_inc.remove('.')
> ValueError: list.remove(x): x not in list
> 
> What should I do to overcome this?
I patched this at work yesterday.  I'll get you the patch when I get
back to Catalyst tomorrow.

It wasn't hard, just something like adding:

if '.' in perl_inc:

at the indicated line.

Andrew Bartlett

-- 
Andrew Bartlett                       http://samba.org/~abartlet/
Authentication Developer, Samba Team  http://samba.org
Samba Developer, Catalyst IT          http://catalyst.net.nz/services/samba

Andrew Bartlett

2016-Oct-28 09:19 UTC

head link

[Samba] samba-4.5.1 build problem

On Thu, 2016-10-27 at 01:34 +1300, Andrew Bartlett
wrote:> On Wed, 2016-10-26 at 10:21 +0200, Peter Serbe via samba wrote:
> > 
> > Dear Samba experts, 
> > 
> > I tried to install the latest Samba release the way I 
> > did it always, i.e. starting with:
> > 
> > ./configure --prefix=/usr/local/samba \
> >             --with-piddir=/usr/local/samba/var/run \
> >             --with-syslog \
> >             --with-quotas \
> >             --with-acl-support \
> >             --enable-debug \
> >             --enable-cups \
> >             --enable-selftest \
> >             --with-ads \
> >             --with-shared-modules=idmap_ad
> > 
> > But after a short while this stops throwing an error, 
> > which is totally cryptic to me
> > 
> > Checking for perl
> > 5.0.0                                                           :
> > ok
> > 5.24.1
> > Checking for perl
> > $Config{vendorprefix}:                                          :
> > '/usr'
> > PERL_ARCH_INSTALL_DIR:                                             
> >   
> >              : '${LIBDIR}/perl5'
> > PERL_LIB_INSTALL_DIR:                                              
> >   
> >              : '${DATADIR}/perl5'
> > Traceback (most recent call last):
> >   File "./buildtools/bin/waf", line 76, in <module>
> >     Scripting.prepare(t, cwd, VERSION, wafdir)
> >   File "/usr/src/samba/samba-
> > 4.5.1/third_party/waf/wafadmin/Scripting.py", line 145, in
prepare
> >     prepare_impl(t, cwd, ver, wafdir)
> >   File "/usr/src/samba/samba-
> > 4.5.1/third_party/waf/wafadmin/Scripting.py", line 135, in
> > prepare_impl
> >     main()
> >   File "/usr/src/samba/samba-4.5.1/wscript", line 347, in
main
> >     wildcard_main(wildcard_cmd)
> >   File "./buildtools/wafsamba/samba_wildcard.py", line 110,
in
> > wildcard_main
> >     fun(ctx)
> >   File "/usr/src/samba/samba-
> > 4.5.1/third_party/waf/wafadmin/Scripting.py", line 241, in
> > configure
> >     conf.sub_config([''])
> >   File "/usr/src/samba/samba-
> > 4.5.1/third_party/waf/wafadmin/Configure.py", line 237, in
> > sub_config
> >     self.recurse(k, name='configure')
> >   File "/usr/src/samba/samba-
> > 4.5.1/third_party/waf/wafadmin/Utils.py", line 656, in recurse
> >     f(self)
> >   File "/usr/src/samba/samba-4.5.1/wscript", line 103, in
configure
> >     conf.SAMBA_CHECK_PERL(mandatory=True)
> >   File "./buildtools/wafsamba/samba_perl.py", line 52, in
> > SAMBA_CHECK_PERL
> >     perl_inc.remove('.')
> > ValueError: list.remove(x): x not in list
> > 
> > What should I do to overcome this?
> 
> I patched this at work yesterday.  I'll get you the patch when I get
> back to Catalyst tomorrow.
> 
> It wasn't hard, just something like adding:
> 
> if '.' in perl_inc:
> 
> at the indicated line.
> 
> Andrew Bartlett
I'll get:

http://git.catalyst.net.nz/gw?p=samba.git;a=commitdiff_plain;h=edb109f6
82b296044cb4cb84bb03305a75e19c2d

Into the tree.  Have you filed a bug?  If so tell me the number and
I'll include that in the patch.

Thanks,

Andrew Bartlett

-- 
Andrew Bartlett                       http://samba.org/~abartlet/
Authentication Developer, Samba Team  http://samba.org
Samba Developer, Catalyst IT          http://catalyst.net.nz/services/samba

Possibly Parallel Threads

Search for more seemingly similar threads

samba - Oct 2016 - samba-4.5.1 build problem

[Samba] samba-4.5.1 build problem

[Samba] samba-4.5.1 build problem

[Samba] samba-4.5.1 build problem

[Samba] samba-4.5.1 build problem

[Samba] samba-4.5.1 build problem

[Samba] samba-4.5.1 build problem

[Samba] samba-4.5.1 build problem

Possibly Parallel Threads