thr3ads.net - samba - [Samba] inconsistent DNS information, windows domain member issues.. [Jun 2016]

If this information is useful, please help other people find it:
Share via:

2016-Jun-05 12:43 UTC

[Samba] inconsistent DNS information, windows domain member issues..

> -----Ursprüngliche Nachricht-----
> Von: samba [mailto:samba-bounces at lists.samba.org] Im Auftrag von
> Rowland penny
> Gesendet: Sonntag, 5. Juni 2016 12:49
> An: samba at lists.samba.org
> Betreff: Re: [Samba] inconsistent DNS information, windows domain
> member issues..
> 
> On 05/06/16 10:05, Jo wrote:
> > I joined a Windows 10 Pro system to my (still experimental) domain.
> > The windows system actually hosts DC2 as a VM, and another Windows
> > (Server 2008
> > R2) at another location hosts DC1 also as a VM. The two locations are
> > connected via a VPN, both systems run only when needed. The windows
> > system does not directly use DC2 for DNS but instead talks to a DNS
> > resolver that delegates the samba Domain to DC2. DC2 uses itself as
> nameserver.
> >
> >
> >
> > I am observing the following issues that may be related or not:
> >
> > *       When I do a nslookup samba.domain DC2 I get the address of
DC1,
> > nslookup DC2.sambadomain DC2 fails. Nslookup DC1.samba.domain DC2
> works.
> > When I use dig @DC2 samba.domain it returns DC1 only. Dig
> samba.domain
> > ANY returns
> >
> > ;; ANSWER SECTION:
> >
> > samba.domain.   3600    IN      SOA     dc2.samba. domain.
> hostmaster.samba.
> > domain. 1 900 600 86400 3600
> >
> > samba. domain.   900     IN      NS      dc1.samba. domain.
> >
> > samba. domain.   900     IN      A       192.168.177.21
> >
> >
> >
> > ;; ADDITIONAL SECTION:
> >
> > dc1.samba. domain. 900   IN      A       192.168.177.21
> >
> > Same information @DC2 or the local resolver of the network
> >
> > *       On windows nslookup -type=ANY samba.domain. (note the .)
> >
> > Server:  netgear.local
> >
> > Address:  192.168.15.2
> >
> >
> >
> > samba.domain
> >
> >          primary name server = dc2.samba. domain
> >
> >          responsible mail addr = hostmaster.samba.domain
> >
> >          serial  = 1
> >
> >          refresh = 900 (15 mins)
> >
> >          retry   = 600 (10 mins)
> >
> >          expire  = 86400 (1 day)
> >
> >          default TTL = 3600 (1 hour)
> >
> > samba. domain nameserver = dc1.samba. domain
> >
> > samba. domain              internet address = 192.168.177.21
> >
> > dc1.samba. domain       internet address = 192.168.177.21
> >
> > *       windows nslookup -type=ANY samba.domain (without .) looks for
> > samba.domain.domain. Is this OK or does it point to a problematic
> > search configuration?
> >
> > *       When I use the DNS mmc snap-in I can see a host record for
dc2. I
> > can also see a host record for the windows system reflecting the IP
> > address before the system moved to the other location. I tried to
> > update that, but got an error message (translated from German) like
> > “the database of the local security authority is internally
> > inconsistent”. The snap-in is ultra slow via VPN, but what makes me
> > more nervous are the to me inconsistent views on the DNS – nslookup
> showing DC2, mmc showing DC1 as the NS.
> >
> > *       In windows management console, only some of the domain
> > users&principals are shown with the name domain\identity, most of
them
> > are shown S-xxx. With the one use shown domain\user I can logon to the
> > windows system however (likely with cached credentials, but don´t dare
> > to change them to confirm)
> >
> > *       When I try to modify folder permissions on the windows system,
I get
> > a message “Unable to contact Active Directory to access or verify
> > claim types”
> >
> > *       On DC2: kinit Administrator returns “kinit: Cannot contact any
KDC
> > for realm ‘samba.domain’ while getting initial credentials. This one
> > was easy to fix by adding the domain to /etc/krb5.conf. I am putting
> > this in as I changed configuration at this point..
> >
> > *       In an attempt to get Samba return DC2 as a nameserver I tried
> > samba-tool dns add dc2 samba.domain @ NS dc2.samba.domain.
> >
> > Password for [Administrator at SAMBA.DOMAIN]:
> >
> > ERROR(runtime): uncaught exception - (-1073741643, '{Device
Timeout}
> > The specified I/O operation on %hs was not completed before the
> > time-out period
> > expired.')
> >
> >    File
"/usr/lib/python2.7/dist-packages/samba/netcmd/__init__.py",
> > line 175, in _run
> >
> >      return self.run(*args, **kwargs)
> >
> >    File
"/usr/lib/python2.7/dist-packages/samba/netcmd/dns.py", line
> > 1062, in run
> >
> >      dns_conn = dns_connect(server, self.lp, self.creds)
> >
> >    File
"/usr/lib/python2.7/dist-packages/samba/netcmd/dns.py", line
> > 40, in dns_connect
> >
> >      dns_conn = dnsserver.dnsserver(binding_str, lp, creds)
> >
> > in another attempt the command produced “Record added successfully”,
> > but using dig or nslookup I cannot find it. It is shown in the DNS mmc
> > snap-in (at least now). Restarting bind did not help.
> >
> > *       Following
> >
> https://wiki.samba.org/index.php/Check_and_fix_DNS_entries_on_DC_joins
> > I tried
> >
> > root at dc2:/etc/bind# samba-tool dns add dc1 samba.domain DC2 A
> > 192.168.15.22 -UAdministrator
> >
> > Password for [SAMBA\Administrator]:
> >
> > ERROR: Record already exists
> >
> > root at dc2:/etc/bind# samba-tool dns add dc2 samba.domain DC2 A
> > 192.168.15.22 -UAdministrator
> >
> > Password for [SAMBA\Administrator]:
> >
> > ERROR: Record already exists
> >
> > root at dc2:/etc/bind# host -t A DC2.samba.domain
> >
> > Host DC2.samba.lindenberg.one not found: 3(NXDOMAIN)
> >
> >                How should I proceed there?
> >
> >
> >
> > I don´t know how to fix the inconsistent DNS entries and get windows
> > to work. Please advise.
> >
> > Thanks, Joachim
> >
> 
> Is bind9 running on the DCs ? and if so, are you using bind_dlz ?

Yes and yes.
> 
> Your DCs really need to be running at all times, so that replication can
work
> properly, also each DC should use the other for their DNS server, anything
> unknown to the DNS servers on the DCs should be forwarded to an external
> DNS that does know or can find out.
I understand that they need to be up simultaneously for replication, but
otherwise that should not be the case. Or why? Imho the point of redundancy is
that you can tolerate failure. In fact I would like to run this on two bananas
but haven´t found a usable distribution so far that offers recent versions of
Samba (and supports encryption at least of the relevant data). Running the
windows hosts all the time is not an option due to noise, energy consumption,
etc.

The point of whether the DC should use the respective other DC for DNS is
obviously debated here. The DCs do have an upstream forwarder configured in
bind.
> 
> Can you please post  /etc/resolv.conf, /etc/hosts and /etc/krb5.conf from
> each DC, can you also post the smb.conf file from each DC.
> 
joachim at dc1:~$ cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 192.168.177.21
search samba.domain
joachim at dc1:~$ cat /etc/hosts
127.0.0.1       localhost
192.168.177.21  dc1 dc1.samba.domain
192.168.15.22   dc2 dc2.samba.domain

# The following lines are desirable for IPv6 capable hosts
#::1     localhost ip6-localhost ip6-loopback
#ff02::1 ip6-allnodes
#ff02::2 ip6-allrouters
joachim at dc1:~$ cat /etc/krb5.conf
[libdefaults]
        default_realm = SAMBA.DOMAIN

# The following krb5.conf variables are only for MIT Kerberos.
        krb4_config = /etc/krb.conf
        krb4_realms = /etc/krb.realms
        kdc_timesync = 1
        ccache_type = 4
        forwardable = true
        proxiable = true

# The following encryption type specification will be used by MIT Kerberos
# if uncommented.  In general, the defaults in the MIT Kerberos code are
# correct and overriding these specifications only serves to disable new
# encryption types as they are added, creating interoperability problems.
#
# Thie only time when you might need to uncomment these lines and change
# the enctypes is if you have local software that will break on ticket
# caches containing ticket encryption types it doesn't know about (such as
# old versions of Sun Java).

#       default_tgs_enctypes = des3-hmac-sha1
#       default_tkt_enctypes = des3-hmac-sha1
#       permitted_enctypes = des3-hmac-sha1

# The following libdefaults parameters are only for Heimdal Kerberos.
        v4_instance_resolve = false
        v4_name_convert = {
                host = {
                        rcmd = host
                        ftp = ftp
                }
                plain = {
                        something = something-else
                }
        }
        fcc-mit-ticketflags = true

[realms]
        ATHENA.MIT.EDU = {
                kdc = kerberos.mit.edu:88
                kdc = kerberos-1.mit.edu:88
                kdc = kerberos-2.mit.edu:88
                admin_server = kerberos.mit.edu
                default_domain = mit.edu
        }
        MEDIA-LAB.MIT.EDU = {
                kdc = kerberos.media.mit.edu
                admin_server = kerberos.media.mit.edu
        }
        ZONE.MIT.EDU = {
                kdc = casio.mit.edu
                kdc = seiko.mit.edu
                admin_server = casio.mit.edu
        }
        MOOF.MIT.EDU = {
                kdc = three-headed-dogcow.mit.edu:88
                kdc = three-headed-dogcow-1.mit.edu:88
                admin_server = three-headed-dogcow.mit.edu
        }
        CSAIL.MIT.EDU = {
                kdc = kerberos-1.csail.mit.edu
                kdc = kerberos-2.csail.mit.edu
                admin_server = kerberos.csail.mit.edu
                default_domain = csail.mit.edu
                krb524_server = krb524.csail.mit.edu
        }
        IHTFP.ORG = {
                kdc = kerberos.ihtfp.org
                admin_server = kerberos.ihtfp.org
        }
        GNU.ORG = {
                kdc = kerberos.gnu.org
                kdc = kerberos-2.gnu.org
                kdc = kerberos-3.gnu.org
                admin_server = kerberos.gnu.org
        }
        1TS.ORG = {
                kdc = kerberos.1ts.org
                admin_server = kerberos.1ts.org
        }
        GRATUITOUS.ORG = {
                kdc = kerberos.gratuitous.org
                admin_server = kerberos.gratuitous.org
        }
        DOOMCOM.ORG = {
                kdc = kerberos.doomcom.org
                admin_server = kerberos.doomcom.org
        }
        ANDREW.CMU.EDU = {
                kdc = kerberos.andrew.cmu.edu
                kdc = kerberos2.andrew.cmu.edu
                kdc = kerberos3.andrew.cmu.edu
                admin_server = kerberos.andrew.cmu.edu
                default_domain = andrew.cmu.edu
        }
        CS.CMU.EDU = {
                kdc = kerberos.cs.cmu.edu
                kdc = kerberos-2.srv.cs.cmu.edu
                admin_server = kerberos.cs.cmu.edu
        }
        DEMENTIA.ORG = {
                kdc = kerberos.dementix.org
                kdc = kerberos2.dementix.org
                admin_server = kerberos.dementix.org
        }
        stanford.edu = {
                kdc = krb5auth1.stanford.edu
                kdc = krb5auth2.stanford.edu
                kdc = krb5auth3.stanford.edu
                master_kdc = krb5auth1.stanford.edu
                admin_server = krb5-admin.stanford.edu
                default_domain = stanford.edu
        }
        UTORONTO.CA = {
                kdc = kerberos1.utoronto.ca
                kdc = kerberos2.utoronto.ca
                kdc = kerberos3.utoronto.ca
                admin_server = kerberos1.utoronto.ca
                default_domain = utoronto.ca
        }

[domain_realm]
        .mit.edu = ATHENA.MIT.EDU
        mit.edu = ATHENA.MIT.EDU
        .media.mit.edu = MEDIA-LAB.MIT.EDU
        media.mit.edu = MEDIA-LAB.MIT.EDU
        .csail.mit.edu = CSAIL.MIT.EDU
        csail.mit.edu = CSAIL.MIT.EDU
        .whoi.edu = ATHENA.MIT.EDU
        whoi.edu = ATHENA.MIT.EDU
        .stanford.edu = stanford.edu
        .slac.stanford.edu = SLAC.STANFORD.EDU
        .toronto.edu = UTORONTO.CA
        .utoronto.ca = UTORONTO.CA

[login]
        krb4_convert = true
        krb4_get_tickets = false
joachim at dc1:~$ cat /etc/samba/smb.conf
# Global parameters
[global]
        workgroup = SAMBA
        realm = SAMBA.DOMAIN
        netbios name = DC1
        server role = active directory domain controller
        server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl,
winbindd, ntp_signd, kcc, dnsupdate
        idmap_ldb:use rfc2307 = yes

[netlogon]
        path = /var/lib/samba/sysvol/samba.domain/scripts
        read only = No

[sysvol]
        path = /var/lib/samba/sysvol
        read only = No
joachim at dc1:~$

I detected that in krb5.conf the real was missing and added that now. Not sure
whether this changes something.

joachim at dc2:~$ cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 192.168.15.22
search samba.domain

joachim at dc2:~$ cat /etc/hosts
127.0.0.1       localhost
192.168.15.22   dc2 dc2.samba.domain
192.168.177.21  dc1 dc1.samba.domain

joachim at dc2:~$ cat /etc/krb5.conf
[libdefaults]
        default_realm = SAMBA.DOMAIN

# The following krb5.conf variables are only for MIT Kerberos.
        krb4_config = /etc/krb.conf
        krb4_realms = /etc/krb.realms
        kdc_timesync = 1
        ccache_type = 4
        forwardable = true
        proxiable = true

# The following encryption type specification will be used by MIT Kerberos
# if uncommented.  In general, the defaults in the MIT Kerberos code are
# correct and overriding these specifications only serves to disable new
# encryption types as they are added, creating interoperability problems.
#
# Thie only time when you might need to uncomment these lines and change
# the enctypes is if you have local software that will break on ticket
# caches containing ticket encryption types it doesn't know about (such as
# old versions of Sun Java).

#       default_tgs_enctypes = des3-hmac-sha1
#       default_tkt_enctypes = des3-hmac-sha1
#       permitted_enctypes = des3-hmac-sha1

# The following libdefaults parameters are only for Heimdal Kerberos.
        v4_instance_resolve = false
        v4_name_convert = {
                host = {
                        rcmd = host
                        ftp = ftp
                }
                plain = {
                        something = something-else
                }
        }
        fcc-mit-ticketflags = true

[realms]
        SAMBA.domain = {
                kdc = dc2.samba.domain:88
                kdc = dc1.samba.domain:88
                admin_server = dc1.samba.domain
        }
        ATHENA.MIT.EDU = {
                kdc = kerberos.mit.edu:88
                kdc = kerberos-1.mit.edu:88
                kdc = kerberos-2.mit.edu:88
                admin_server = kerberos.mit.edu
                default_domain = mit.edu
        }
        MEDIA-LAB.MIT.EDU = {
                kdc = kerberos.media.mit.edu
                admin_server = kerberos.media.mit.edu
        }
        ZONE.MIT.EDU = {
                kdc = casio.mit.edu
                kdc = seiko.mit.edu
                admin_server = casio.mit.edu
        }
        MOOF.MIT.EDU = {
                kdc = three-headed-dogcow.mit.edu:88
                kdc = three-headed-dogcow-1.mit.edu:88
                admin_server = three-headed-dogcow.mit.edu
        }
        CSAIL.MIT.EDU = {
                kdc = kerberos-1.csail.mit.edu
                kdc = kerberos-2.csail.mit.edu
                admin_server = kerberos.csail.mit.edu
                default_domain = csail.mit.edu
                krb524_server = krb524.csail.mit.edu
        }
        IHTFP.ORG = {
                kdc = kerberos.ihtfp.org
                admin_server = kerberos.ihtfp.org
        }
        GNU.ORG = {
                kdc = kerberos.gnu.org
                kdc = kerberos-2.gnu.org
                kdc = kerberos-3.gnu.org
                admin_server = kerberos.gnu.org
        }
        1TS.ORG = {
                kdc = kerberos.1ts.org
                admin_server = kerberos.1ts.org
        }
        GRATUITOUS.ORG = {
                kdc = kerberos.gratuitous.org
                admin_server = kerberos.gratuitous.org
        }
        DOOMCOM.ORG = {
                kdc = kerberos.doomcom.org
                admin_server = kerberos.doomcom.org
        }
        ANDREW.CMU.EDU = {
                kdc = kerberos.andrew.cmu.edu
                kdc = kerberos2.andrew.cmu.edu
                kdc = kerberos3.andrew.cmu.edu
                admin_server = kerberos.andrew.cmu.edu
                default_domain = andrew.cmu.edu
        }
        CS.CMU.EDU = {
                kdc = kerberos.cs.cmu.edu
                kdc = kerberos-2.srv.cs.cmu.edu
                admin_server = kerberos.cs.cmu.edu
        }
        DEMENTIA.ORG = {
                kdc = kerberos.dementix.org
                kdc = kerberos2.dementix.org
                admin_server = kerberos.dementix.org
        }
        stanford.edu = {
                kdc = krb5auth1.stanford.edu
                kdc = krb5auth2.stanford.edu
                kdc = krb5auth3.stanford.edu
                master_kdc = krb5auth1.stanford.edu
                admin_server = krb5-admin.stanford.edu
                default_domain = stanford.edu
        }
        UTORONTO.CA = {
                kdc = kerberos1.utoronto.ca
                kdc = kerberos2.utoronto.ca
                kdc = kerberos3.utoronto.ca
                admin_server = kerberos1.utoronto.ca
                default_domain = utoronto.ca
        }

[domain_realm]
        .mit.edu = ATHENA.MIT.EDU
        mit.edu = ATHENA.MIT.EDU
        .media.mit.edu = MEDIA-LAB.MIT.EDU
        media.mit.edu = MEDIA-LAB.MIT.EDU
        .csail.mit.edu = CSAIL.MIT.EDU
        csail.mit.edu = CSAIL.MIT.EDU
        .whoi.edu = ATHENA.MIT.EDU
        whoi.edu = ATHENA.MIT.EDU
        .stanford.edu = stanford.edu
        .slac.stanford.edu = SLAC.STANFORD.EDU
        .toronto.edu = UTORONTO.CA
        .utoronto.ca = UTORONTO.CA

[login]
        krb4_convert = true
        krb4_get_tickets = false
joachim at dc2:~$ cat /etc/samba/smb.conf
# Global parameters
[global]
        workgroup = SAMBA
        realm = samba.domain
        netbios name = DC2
        server role = active directory domain controller
        server services = rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbindd,
ntp_signd, kcc, dnsupdate, smb
        dcerpc endpoint servers = epmapper, wkssvc, rpcecho, samr, netlogon,
lsarpc, spoolss, drsuapi, dssetup, unixinfo, browser, eventlog6, backupkey,
dnsserver, winreg, srvsvc

[netlogon]
        path = /var/lib/samba/sysvol/samba.domain/scripts
        read only = No

[sysvol]
        path = /var/lib/samba/sysvol
        read only = No
joachim at dc2:~$

One new piece of mosaic: 

root at dc2:/home/joachim# tail /var/log/samba/log.samba
[2016/06/05 14:28:12.674356,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
[2016/06/05 14:28:12.697076,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
[2016/06/05 14:28:12.719968,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
[2016/06/05 14:28:12.743569,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
[2016/06/05 14:28:12.756246,  0]
../source4/dsdb/dns/dns_update.c:294(dnsupdate_nameupdate_done)
  ../source4/dsdb/dns/dns_update.c:294: Failed DNS update -
NT_STATUS_UNSUCCESSFUL
root at dc2:/home/joachim#

I tried to follow
https://wiki.samba.org/index.php/Dns_tkey_negotiategss:_TKEY_is_unacceptable,
but may be that is outdated? I found a keytab file at
/var/lib/samba/private/secrets.keytab and it contains what is described on the
wiki page:

root at dc2:/home/joachim# klist -k /var/lib/samba/private/secrets.keytab
Keytab name: FILE:/var/lib/samba/private/secrets.keytab
KVNO Principal
---- --------------------------------------------------------------------------
   1 HOST/dc2 at SAMBA.DOMAIN
   1 HOST/dc2.samba.domain at SAMBA.DOMAIN
   1 DC2$@SAMBA.DOMAIN
   1 HOST/dc2 at SAMBA.DOMAIN
   1 HOST/dc2.samba.domain at SAMBA.DOMAIN
   1 DC2$@SAMBA.DOMAIN
   1 HOST/dc2 at SAMBA.DOMAIN
   1 HOST/dc2.samba.domain at SAMBA.DOMAIN
   1 DC2$@SAMBA.DOMAIN
   1 HOST/dc2 at SAMBA.DOMAIN
   1 HOST/dc2.samba.domain at SAMBA.DOMAIN
   1 DC2$@SAMBA.DOMAIN
   1 HOST/dc2 at SAMBA.DOMAIN
   1 HOST/dc2.samba.domain at SAMBA.DOMAIN
   1 DC2$@SAMBA.DOMAIN

Do I have to update some configuration path to point to that file? Create a
link? Or what else to check?

Thanks, Joachim
> Rowland
> 
> 
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba

Rowland penny

2016-Jun-05 15:45 UTC

head link

[Samba] inconsistent DNS information, windows domain member issues..

On 05/06/16 13:43, Jo wrote:>> Your DCs really need to be running at all times, so that replication 
>> can work properly, also each DC should use the other for their DNS 
>> server, anything unknown to the DNS servers on the DCs should be 
>> forwarded to an external DNS that does know or can find out. 
> I understand that they need to be up simultaneously for replication, but
otherwise that should not be the case. Or why? Imho the point of redundancy is
that you can tolerate failure. In fact I would like to run this on two bananas
but haven´t found a usable distribution so far that offers recent versions of
Samba (and supports encryption at least of the relevant data). Running the
windows hosts all the time is not an option due to noise, energy consumption,
etc.
I take it that by 'bananas' you mean 'banana-pi', this probably
suffers
from the same problems as the rpi, you will probably have to build Samba 
yourself and it will probably be unable to cope with a lot of users etc.

You need to understand that if you only have one DC running, it will 
keep trying to contact the other, and any changes made on the running DC 
will need to be replicated to the other when it does come back up.
>
> The point of whether the DC should use the respective other DC for DNS is
obviously debated here. The DCs do have an upstream forwarder configured in
bind.
If you have two DCs, they need to use each other for DNS or you can get 
what is called 'islanding'
>
>> Can you please post  /etc/resolv.conf, /etc/hosts and /etc/krb5.conf
from
>> each DC, can you also post the smb.conf file from each DC.
>>
> joachim at dc1:~$ cat /etc/resolv.conf
> # Dynamic resolv.conf(5) file for glibc resolver(3) generated by
resolvconf(8)
> #     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
> nameserver 192.168.177.21
> search samba.domain
It is not really a good idea to run 'resolvconf' on a fixed ip machine 
(I take it the DCs do have fixed ipaddresses), I suggest you remove it 
and then set /etc/resolv.conf to:

nameserver 192.168.177.22
nameserver 192.168.177.21
search samba.domain

Switch the 'nameserver' lines for the second DC
> joachim at dc1:~$ cat /etc/hosts
> 127.0.0.1       localhost
> 192.168.177.21  dc1 dc1.samba.domain
> 192.168.15.22   dc2 dc2.samba.domain
>
> # The following lines are desirable for IPv6 capable hosts
> #::1     localhost ip6-localhost ip6-loopback
> #ff02::1 ip6-allnodes
> #ff02::2 ip6-allrouters
nothing wrong there, except you don't need the line for the other DC
> joachim at dc1:~$ cat /etc/krb5.conf
> [libdefaults]
>          default_realm = SAMBA.DOMAIN
>
> # The following krb5.conf variables are only for MIT Kerberos.
>          krb4_config = /etc/krb.conf
>          krb4_realms = /etc/krb.realms
>          kdc_timesync = 1
>          ccache_type = 4
>          forwardable = true
>          proxiable = true
>
> # The following encryption type specification will be used by MIT Kerberos
> # if uncommented.  In general, the defaults in the MIT Kerberos code are
> # correct and overriding these specifications only serves to disable new
> # encryption types as they are added, creating interoperability problems.
> #
> # Thie only time when you might need to uncomment these lines and change
> # the enctypes is if you have local software that will break on ticket
> # caches containing ticket encryption types it doesn't know about (such
as
> # old versions of Sun Java).
>
> #       default_tgs_enctypes = des3-hmac-sha1
> #       default_tkt_enctypes = des3-hmac-sha1
> #       permitted_enctypes = des3-hmac-sha1
>
> # The following libdefaults parameters are only for Heimdal Kerberos.
>          v4_instance_resolve = false
>          v4_name_convert = {
>                  host = {
>                          rcmd = host
>                          ftp = ftp
>                  }
>                  plain = {
>                          something = something-else
>                  }
>          }
>          fcc-mit-ticketflags = true
>
> [realms]
>          ATHENA.MIT.EDU = {
>                  kdc = kerberos.mit.edu:88
>                  kdc = kerberos-1.mit.edu:88
>                  kdc = kerberos-2.mit.edu:88
>                  admin_server = kerberos.mit.edu
>                  default_domain = mit.edu
>          }
>          MEDIA-LAB.MIT.EDU = {
>                  kdc = kerberos.media.mit.edu
>                  admin_server = kerberos.media.mit.edu
>          }
>          ZONE.MIT.EDU = {
>                  kdc = casio.mit.edu
>                  kdc = seiko.mit.edu
>                  admin_server = casio.mit.edu
>          }
>          MOOF.MIT.EDU = {
>                  kdc = three-headed-dogcow.mit.edu:88
>                  kdc = three-headed-dogcow-1.mit.edu:88
>                  admin_server = three-headed-dogcow.mit.edu
>          }
>          CSAIL.MIT.EDU = {
>                  kdc = kerberos-1.csail.mit.edu
>                  kdc = kerberos-2.csail.mit.edu
>                  admin_server = kerberos.csail.mit.edu
>                  default_domain = csail.mit.edu
>                  krb524_server = krb524.csail.mit.edu
>          }
>          IHTFP.ORG = {
>                  kdc = kerberos.ihtfp.org
>                  admin_server = kerberos.ihtfp.org
>          }
>          GNU.ORG = {
>                  kdc = kerberos.gnu.org
>                  kdc = kerberos-2.gnu.org
>                  kdc = kerberos-3.gnu.org
>                  admin_server = kerberos.gnu.org
>          }
>          1TS.ORG = {
>                  kdc = kerberos.1ts.org
>                  admin_server = kerberos.1ts.org
>          }
>          GRATUITOUS.ORG = {
>                  kdc = kerberos.gratuitous.org
>                  admin_server = kerberos.gratuitous.org
>          }
>          DOOMCOM.ORG = {
>                  kdc = kerberos.doomcom.org
>                  admin_server = kerberos.doomcom.org
>          }
>          ANDREW.CMU.EDU = {
>                  kdc = kerberos.andrew.cmu.edu
>                  kdc = kerberos2.andrew.cmu.edu
>                  kdc = kerberos3.andrew.cmu.edu
>                  admin_server = kerberos.andrew.cmu.edu
>                  default_domain = andrew.cmu.edu
>          }
>          CS.CMU.EDU = {
>                  kdc = kerberos.cs.cmu.edu
>                  kdc = kerberos-2.srv.cs.cmu.edu
>                  admin_server = kerberos.cs.cmu.edu
>          }
>          DEMENTIA.ORG = {
>                  kdc = kerberos.dementix.org
>                  kdc = kerberos2.dementix.org
>                  admin_server = kerberos.dementix.org
>          }
>          stanford.edu = {
>                  kdc = krb5auth1.stanford.edu
>                  kdc = krb5auth2.stanford.edu
>                  kdc = krb5auth3.stanford.edu
>                  master_kdc = krb5auth1.stanford.edu
>                  admin_server = krb5-admin.stanford.edu
>                  default_domain = stanford.edu
>          }
>          UTORONTO.CA = {
>                  kdc = kerberos1.utoronto.ca
>                  kdc = kerberos2.utoronto.ca
>                  kdc = kerberos3.utoronto.ca
>                  admin_server = kerberos1.utoronto.ca
>                  default_domain = utoronto.ca
>          }
>
> [domain_realm]
>          .mit.edu = ATHENA.MIT.EDU
>          mit.edu = ATHENA.MIT.EDU
>          .media.mit.edu = MEDIA-LAB.MIT.EDU
>          media.mit.edu = MEDIA-LAB.MIT.EDU
>          .csail.mit.edu = CSAIL.MIT.EDU
>          csail.mit.edu = CSAIL.MIT.EDU
>          .whoi.edu = ATHENA.MIT.EDU
>          whoi.edu = ATHENA.MIT.EDU
>          .stanford.edu = stanford.edu
>          .slac.stanford.edu = SLAC.STANFORD.EDU
>          .toronto.edu = UTORONTO.CA
>          .utoronto.ca = UTORONTO.CA
>
> [login]
>          krb4_convert = true
>          krb4_get_tickets = false
Here's the thing, your /etc/krb5.conf only needs to look like this:

[libdefaults]
         default_realm = SAMBA.DOMAIN

Everything else is unneeded or the default.

> joachim at dc1:~$ cat /etc/samba/smb.conf
> # Global parameters
> [global]
>          workgroup = SAMBA
>          realm = SAMBA.DOMAIN
>          netbios name = DC1
>          server role = active directory domain controller
>          server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl,
winbindd, ntp_signd, kcc, dnsupdate
>          idmap_ldb:use rfc2307 = yes
>
> [netlogon]
>          path = /var/lib/samba/sysvol/samba.domain/scripts
>          read only = No
>
> [sysvol]
>          path = /var/lib/samba/sysvol
>          read only = No
> joachim at dc1:~$
This looks ok.

The files on the second DC should be similar to the first, except for 
the obvious name & ip changes.
>
>
>
> One new piece of mosaic:
>
> root at dc2:/home/joachim# tail /var/log/samba/log.samba
> [2016/06/05 14:28:12.674356,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
>    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
> [2016/06/05 14:28:12.697076,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
>    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
> [2016/06/05 14:28:12.719968,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
>    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
> [2016/06/05 14:28:12.743569,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
>    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is unacceptable
> [2016/06/05 14:28:12.756246,  0]
../source4/dsdb/dns/dns_update.c:294(dnsupdate_nameupdate_done)
>    ../source4/dsdb/dns/dns_update.c:294: Failed DNS update -
NT_STATUS_UNSUCCESSFUL
> root at dc2:/home/joachim#
>
> I tried to follow
https://wiki.samba.org/index.php/Dns_tkey_negotiategss:_TKEY_is_unacceptable,
but may be that is outdated? I found a keytab file at
/var/lib/samba/private/secrets.keytab and it contains what is described on the
wiki page:
>
> root at dc2:/home/joachim# klist -k /var/lib/samba/private/secrets.keytab
> Keytab name: FILE:/var/lib/samba/private/secrets.keytab
> KVNO Principal
> ----
--------------------------------------------------------------------------
>     1 HOST/dc2 at SAMBA.DOMAIN
>     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
>     1 DC2$@SAMBA.DOMAIN
>     1 HOST/dc2 at SAMBA.DOMAIN
>     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
>     1 DC2$@SAMBA.DOMAIN
>     1 HOST/dc2 at SAMBA.DOMAIN
>     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
>     1 DC2$@SAMBA.DOMAIN
>     1 HOST/dc2 at SAMBA.DOMAIN
>     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
>     1 DC2$@SAMBA.DOMAIN
>     1 HOST/dc2 at SAMBA.DOMAIN
>     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
>     1 DC2$@SAMBA.DOMAIN
>
> Do I have to update some configuration path to point to that file? Create a
link? Or what else to check?
>
>
>
Are you running an ntp server on each DC? if not, I suggest you do.

How have you set up Bind, can you post your named.conf files.

Rowland

2016-Jun-05 17:25 UTC

head link

[Samba] inconsistent DNS information, windows domain member issues..

> -----Ursprüngliche Nachricht-----
> Von: Rowland penny [mailto:rpenny at samba.org]
> Gesendet: Sonntag, 5. Juni 2016 17:46
> An: Jo <j.o.l at live.com>
> Cc: 'samba' <samba at lists.samba.org>
> Betreff: Re: AW: [Samba] inconsistent DNS information, windows domain
> member issues..
> 
> On 05/06/16 13:43, Jo wrote:
> >> Your DCs really need to be running at all times, so that
replication
> >> can work properly, also each DC should use the other for their DNS
> >> server, anything unknown to the DNS servers on the DCs should be
> >> forwarded to an external DNS that does know or can find out.
> > I understand that they need to be up simultaneously for replication,
but
> otherwise that should not be the case. Or why? Imho the point of
> redundancy is that you can tolerate failure. In fact I would like to run
this on
> two bananas but haven´t found a usable distribution so far that offers
recent
> versions of Samba (and supports encryption at least of the relevant data).
> Running the windows hosts all the time is not an option due to noise,
energy
> consumption, etc.
> 
> I take it that by 'bananas' you mean 'banana-pi', this
probably suffers
> from the same problems as the rpi, you will probably have to build Samba
> yourself and it will probably be unable to cope with a lot of users etc.
Compared to the Pi the Banana Pro is roughly twice as fast and has gigabit
network - it runs all my external networking (bind, nginx reverse proxies and
websites) very well, but I am aware it slows down communication considerably if
I proxy internal communication (file transfer) through it. For now I assume it
should be OK for the number of users and systems I plan to connect, both in the
order of 10-20, but the challenge is to get it running in the first place and
then sustainable (available, up to date, secure, and with backups).
> 
> You need to understand that if you only have one DC running, it will
> keep trying to contact the other, and any changes made on the running DC
> will need to be replicated to the other when it does come back up.
> 
> >
> > The point of whether the DC should use the respective other DC for DNS
is
> obviously debated here. The DCs do have an upstream forwarder configured
> in bind.
> 
> If you have two DCs, they need to use each other for DNS or you can get
> what is called 'islanding'
> 
> >
> >> Can you please post  /etc/resolv.conf, /etc/hosts and
/etc/krb5.conf from
> >> each DC, can you also post the smb.conf file from each DC.
> >>
> > joachim at dc1:~$ cat /etc/resolv.conf
> > # Dynamic resolv.conf(5) file for glibc resolver(3) generated by
> resolvconf(8)
> > #     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE
> OVERWRITTEN
> > nameserver 192.168.177.21
> > search samba.domain
> 
> It is not really a good idea to run 'resolvconf' on a fixed ip
machine
> (I take it the DCs do have fixed ipaddresses), I suggest you remove it
> and then set /etc/resolv.conf to:
> 
> nameserver 192.168.177.22
> nameserver 192.168.177.21
> search samba.domain
> 
> Switch the 'nameserver' lines for the second DCSorry, reminds me about asking for legal advice. Ask two lawyers, get three
opinions, of course conflicting. Afaik the recommended way on Ubuntu is to put
the configuration in /etc/network/interfaces:
# The primary network interface
auto enp0s3
iface enp0s3 inet static
        address 192.168.15.22
        netmask 255.255.255.0
        gateway 192.168.15.1
        dns-nameservers 192.168.15.22
        dns-search samba.lindenberg.one

...and I prefer to keep configuration as local as possible, especially as
occasionally I need to move systems from one location to the other. With respect
to the islands issue Andrew recommended to use the DC on the DC. I am aware of
the monitoring issue, but I definitely expect less updates to the DC contents
then outages of the network in between. And for my experiments I can wake them
explicitly as needed.
> > joachim at dc1:~$ cat /etc/hosts
> > 127.0.0.1       localhost
> > 192.168.177.21  dc1 dc1.samba.domain
> > 192.168.15.22   dc2 dc2.samba.domain
> >
> > # The following lines are desirable for IPv6 capable hosts
> > #::1     localhost ip6-localhost ip6-loopback
> > #ff02::1 ip6-allnodes
> > #ff02::2 ip6-allrouters
> 
> nothing wrong there, except you don't need the line for the other DCThe line for the other DC helps with digging both for comparisions...
> 
> > joachim at dc1:~$ cat /etc/krb5.conf
> > [libdefaults]
> >          default_realm = SAMBA.DOMAIN
> >
> > # The following krb5.conf variables are only for MIT Kerberos.
> >          krb4_config = /etc/krb.conf
> >          krb4_realms = /etc/krb.realms
> >          kdc_timesync = 1
> >          ccache_type = 4
> >          forwardable = true
> >          proxiable = true
> >
> > # The following encryption type specification will be used by MIT
Kerberos
> > # if uncommented.  In general, the defaults in the MIT Kerberos code
are
> > # correct and overriding these specifications only serves to disable
new
> > # encryption types as they are added, creating interoperability
problems.
> > #
> > # Thie only time when you might need to uncomment these lines and
> change
> > # the enctypes is if you have local software that will break on ticket
> > # caches containing ticket encryption types it doesn't know about
(such as
> > # old versions of Sun Java).
> >
> > #       default_tgs_enctypes = des3-hmac-sha1
> > #       default_tkt_enctypes = des3-hmac-sha1
> > #       permitted_enctypes = des3-hmac-sha1
> >
> > # The following libdefaults parameters are only for Heimdal Kerberos.
> >          v4_instance_resolve = false
> >          v4_name_convert = {
> >                  host = {
> >                          rcmd = host
> >                          ftp = ftp
> >                  }
> >                  plain = {
> >                          something = something-else
> >                  }
> >          }
> >          fcc-mit-ticketflags = true
> >
> > [realms]
> >          ATHENA.MIT.EDU = {
> >                  kdc = kerberos.mit.edu:88
> >                  kdc = kerberos-1.mit.edu:88
> >                  kdc = kerberos-2.mit.edu:88
> >                  admin_server = kerberos.mit.edu
> >                  default_domain = mit.edu
> >          }
> >          MEDIA-LAB.MIT.EDU = {
> >                  kdc = kerberos.media.mit.edu
> >                  admin_server = kerberos.media.mit.edu
> >          }
> >          ZONE.MIT.EDU = {
> >                  kdc = casio.mit.edu
> >                  kdc = seiko.mit.edu
> >                  admin_server = casio.mit.edu
> >          }
> >          MOOF.MIT.EDU = {
> >                  kdc = three-headed-dogcow.mit.edu:88
> >                  kdc = three-headed-dogcow-1.mit.edu:88
> >                  admin_server = three-headed-dogcow.mit.edu
> >          }
> >          CSAIL.MIT.EDU = {
> >                  kdc = kerberos-1.csail.mit.edu
> >                  kdc = kerberos-2.csail.mit.edu
> >                  admin_server = kerberos.csail.mit.edu
> >                  default_domain = csail.mit.edu
> >                  krb524_server = krb524.csail.mit.edu
> >          }
> >          IHTFP.ORG = {
> >                  kdc = kerberos.ihtfp.org
> >                  admin_server = kerberos.ihtfp.org
> >          }
> >          GNU.ORG = {
> >                  kdc = kerberos.gnu.org
> >                  kdc = kerberos-2.gnu.org
> >                  kdc = kerberos-3.gnu.org
> >                  admin_server = kerberos.gnu.org
> >          }
> >          1TS.ORG = {
> >                  kdc = kerberos.1ts.org
> >                  admin_server = kerberos.1ts.org
> >          }
> >          GRATUITOUS.ORG = {
> >                  kdc = kerberos.gratuitous.org
> >                  admin_server = kerberos.gratuitous.org
> >          }
> >          DOOMCOM.ORG = {
> >                  kdc = kerberos.doomcom.org
> >                  admin_server = kerberos.doomcom.org
> >          }
> >          ANDREW.CMU.EDU = {
> >                  kdc = kerberos.andrew.cmu.edu
> >                  kdc = kerberos2.andrew.cmu.edu
> >                  kdc = kerberos3.andrew.cmu.edu
> >                  admin_server = kerberos.andrew.cmu.edu
> >                  default_domain = andrew.cmu.edu
> >          }
> >          CS.CMU.EDU = {
> >                  kdc = kerberos.cs.cmu.edu
> >                  kdc = kerberos-2.srv.cs.cmu.edu
> >                  admin_server = kerberos.cs.cmu.edu
> >          }
> >          DEMENTIA.ORG = {
> >                  kdc = kerberos.dementix.org
> >                  kdc = kerberos2.dementix.org
> >                  admin_server = kerberos.dementix.org
> >          }
> >          stanford.edu = {
> >                  kdc = krb5auth1.stanford.edu
> >                  kdc = krb5auth2.stanford.edu
> >                  kdc = krb5auth3.stanford.edu
> >                  master_kdc = krb5auth1.stanford.edu
> >                  admin_server = krb5-admin.stanford.edu
> >                  default_domain = stanford.edu
> >          }
> >          UTORONTO.CA = {
> >                  kdc = kerberos1.utoronto.ca
> >                  kdc = kerberos2.utoronto.ca
> >                  kdc = kerberos3.utoronto.ca
> >                  admin_server = kerberos1.utoronto.ca
> >                  default_domain = utoronto.ca
> >          }
> >
> > [domain_realm]
> >          .mit.edu = ATHENA.MIT.EDU
> >          mit.edu = ATHENA.MIT.EDU
> >          .media.mit.edu = MEDIA-LAB.MIT.EDU
> >          media.mit.edu = MEDIA-LAB.MIT.EDU
> >          .csail.mit.edu = CSAIL.MIT.EDU
> >          csail.mit.edu = CSAIL.MIT.EDU
> >          .whoi.edu = ATHENA.MIT.EDU
> >          whoi.edu = ATHENA.MIT.EDU
> >          .stanford.edu = stanford.edu
> >          .slac.stanford.edu = SLAC.STANFORD.EDU
> >          .toronto.edu = UTORONTO.CA
> >          .utoronto.ca = UTORONTO.CA
> >
> > [login]
> >          krb4_convert = true
> >          krb4_get_tickets = false
> 
> Here's the thing, your /etc/krb5.conf only needs to look like this:
> 
> [libdefaults]
>          default_realm = SAMBA.DOMAIN
> 
> Everything else is unneeded or the default.Which explains why it worked without defining the domain on DC1. OK, I removed
the garbage...
> 
> > joachim at dc1:~$ cat /etc/samba/smb.conf
> > # Global parameters
> > [global]
> >          workgroup = SAMBA
> >          realm = SAMBA.DOMAIN
> >          netbios name = DC1
> >          server role = active directory domain controller
> >          server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc,
drepl,
> winbindd, ntp_signd, kcc, dnsupdate
> >          idmap_ldb:use rfc2307 = yes
> >
> > [netlogon]
> >          path = /var/lib/samba/sysvol/samba.domain/scripts
> >          read only = No
> >
> > [sysvol]
> >          path = /var/lib/samba/sysvol
> >          read only = No
> > joachim at dc1:~$
> 
> This looks ok.
> 
> The files on the second DC should be similar to the first, except for
> the obvious name & ip changes.
> 
> >
> >
> >
> > One new piece of mosaic:
> >
> > root at dc2:/home/joachim# tail /var/log/samba/log.samba
> > [2016/06/05 14:28:12.674356,  0]
> ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
> >    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is
> unacceptable
> > [2016/06/05 14:28:12.697076,  0]
> ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
> >    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is
> unacceptable
> > [2016/06/05 14:28:12.719968,  0]
> ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
> >    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is
> unacceptable
> > [2016/06/05 14:28:12.743569,  0]
> ../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
> >    /usr/sbin/samba_dnsupdate: dns_tkey_negotiategss: TKEY is
> unacceptable
> > [2016/06/05 14:28:12.756246,  0]
> ../source4/dsdb/dns/dns_update.c:294(dnsupdate_nameupdate_done)
> >    ../source4/dsdb/dns/dns_update.c:294: Failed DNS update -
> NT_STATUS_UNSUCCESSFUL
> > root at dc2:/home/joachim#
> >
> > I tried to follow
> https://wiki.samba.org/index.php/Dns_tkey_negotiategss:_TKEY_is_unaccep
> table, but may be that is outdated? I found a keytab file at
> /var/lib/samba/private/secrets.keytab and it contains what is described on
> the wiki page:
> >
> > root at dc2:/home/joachim# klist -k
/var/lib/samba/private/secrets.keytab
> > Keytab name: FILE:/var/lib/samba/private/secrets.keytab
> > KVNO Principal
> > ----
--------------------------------------------------------------------------
> >     1 HOST/dc2 at SAMBA.DOMAIN
> >     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
> >     1 DC2$@SAMBA.DOMAIN
> >     1 HOST/dc2 at SAMBA.DOMAIN
> >     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
> >     1 DC2$@SAMBA.DOMAIN
> >     1 HOST/dc2 at SAMBA.DOMAIN
> >     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
> >     1 DC2$@SAMBA.DOMAIN
> >     1 HOST/dc2 at SAMBA.DOMAIN
> >     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
> >     1 DC2$@SAMBA.DOMAIN
> >     1 HOST/dc2 at SAMBA.DOMAIN
> >     1 HOST/dc2.samba.domain at SAMBA.DOMAIN
> >     1 DC2$@SAMBA.DOMAIN
> >
> > Do I have to update some configuration path to point to that file?
Create a
> link? Or what else to check?
> >
> >
> >
> 
> Are you running an ntp server on each DC? if not, I suggest you do.I am running ntpd as a client. Why should I configure a server? Which Samba or
AD client uses an ntp server on a DC by default?
> 
> How have you set up Bind, can you post your named.conf files.
root at dc2:/home/joachim# cat /etc/bind/named.conf
// This is the primary configuration file for the BIND DNS server named.
//
// Please read /usr/share/doc/bind9/README.Debian.gz for information on the
// structure of BIND configuration files in Debian, *BEFORE* you customize
// this configuration file.
//
// If you are just adding zones, please do that in /etc/bind/named.conf.local

include "/etc/bind/named.conf.options";
include "/etc/bind/named.conf.local";
include "/etc/bind/named.conf.default-zones";
include "/etc/bind/bind.keys";

root at dc2:/home/joachim# cat /etc/bind/named.conf.options
options {
        directory "/var/cache/bind";

        // If there is a firewall between you and nameservers you want
        // to talk to, you may need to fix the firewall to allow multiple
        // ports to talk.  See http://www.kb.cert.org/vuls/id/800113

        // If your ISP provided one or more IP addresses for stable
        // nameservers, you probably want to use them as forwarders.
        // Uncomment the following block, and insert the addresses replacing
        // the all-0's placeholder.

        forwarders {
                192.168.15.2;
        };

       
//=======================================================================       
// If BIND logs error messages about the root key being expired,
        // you will need to update your keys.  See https://www.isc.org/bind-keys
       
//=======================================================================       
dnssec-validation no; #auto;

        auth-nxdomain no;    # conform to RFC1035
#       listen-on-v6 { any; };
        allow-query-cache { any; };
        allow-query { any; };
# allow-recursion { any;192.168.0.0/16;localhost; };
        allow-recursion { any; };
        tkey-gssapi-keytab "/var/lib/samba/private/dns.keytab";
};

root at dc2:/home/joachim# cat /etc/bind/named.conf.local
//
// Do any local configuration here
//

// Consider adding the 1918 zones here, if they are not used in your
// organization
//include "/etc/bind/zones.rfc1918";

zone "domain" {
        type master;
        file "/etc/bind/lindenberg.one";
#       allow-transfer { 192.168.177.8 };
        allow-update { key rndc-key; };
};

include "/var/lib/samba/private/named.conf";

I am ommitting named.conf.default-zones as I did not touch that. Note that I do
have a zone file for domain but it is not really used right now. Samba.domain is
obviously a subdomain served by Samba. And one extra you did not ask for...

root at dc2:/home/joachim# cat /var/lib/samba/private/named.conf
# This DNS configuration is for BIND 9.8.0 or later with dlz_dlopen support.
#
# This file should be included in your main BIND configuration file
#
# For example with
# include "/var/lib/samba/private/named.conf";

#
# This configures dynamically loadable zones (DLZ) from AD schema
# Uncomment only single database line, depending on your BIND version
#
dlz "AD DNS Zone" {
    # For BIND 9.8.x
    # database "dlopen
/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9.so";

    # For BIND 9.9.x
    # database "dlopen
/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_9.so";

    # For BIND 9.10.x
     database "dlopen
/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so";
};

root at dc2:/home/joachim#

I just also tried to replace the nonexisting dns.keytab with secrets.keytab -
then I get
root at dc2:/home/joachim# tail /var/log/samba/log.samba
[2016/06/05 19:16:29.377544,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: update failed: REFUSED
[2016/06/05 19:16:29.404010,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: update failed: REFUSED
[2016/06/05 19:16:29.430791,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: update failed: REFUSED
[2016/06/05 19:16:29.458506,  0]
../lib/util/util_runcmd.c:328(samba_runcmd_io_handler)
  /usr/sbin/samba_dnsupdate: update failed: REFUSED
[2016/06/05 19:16:29.472351,  0]
../source4/dsdb/dns/dns_update.c:294(dnsupdate_nameupdate_done)
  ../source4/dsdb/dns/dns_update.c:294: Failed DNS update -
NT_STATUS_UNSUCCESSFUL
root at dc2:/home/joachim#

...instead of the "TKEY is unacceptable"
before.> 
> Rowland
> 
>

Seemingly Similar Threads

Search for more reasonably related threads

samba - Jun 2016 - inconsistent DNS information, windows domain member issues..

[Samba] inconsistent DNS information, windows domain member issues..

[Samba] inconsistent DNS information, windows domain member issues..

[Samba] inconsistent DNS information, windows domain member issues..

Seemingly Similar Threads