Cédric Bosdonnat
2016-Jun-22 09:45 UTC
[Libguestfs] [PATCH 0/4] virt-p2v support for openSUSE / SLES
Hi there, Here are a few patches to get virt-p2v working on openSUSE and SLES. Note that I intentionnaly use icewm and yast2 lan for SLES and openSUSE since SLES doesn't ship metacity and all of NetworkManager pieces. Cédric Bosdonnat (4): p2v: use yast2 lan on SUSE distros rather than NM p2v: fix dependencies for SLES / openSUSE p2v: add virt-p2v-make-kiwi to generate kiwi config p2v: add -x option to nm-online .gitignore | 3 + configure.ac | 2 + p2v/Makefile.am | 31 +++++- p2v/dependencies.m4 | 19 ++-- p2v/gui.c | 7 +- p2v/kiwi-config.sh | 73 +++++++++++++++ p2v/kiwi-config.xml.in | 92 ++++++++++++++++++ p2v/launch-virt-p2v.in | 17 +++- p2v/utils.c | 2 +- p2v/virt-p2v-make-disk.pod | 1 + p2v/virt-p2v-make-kiwi.in | 228 +++++++++++++++++++++++++++++++++++++++++++++ p2v/virt-p2v-make-kiwi.pod | 184 ++++++++++++++++++++++++++++++++++++ p2v/virt-p2v.pod | 1 + 13 files changed, 642 insertions(+), 18 deletions(-) create mode 100755 p2v/kiwi-config.sh create mode 100644 p2v/kiwi-config.xml.in create mode 100644 p2v/virt-p2v-make-kiwi.in create mode 100644 p2v/virt-p2v-make-kiwi.pod -- 2.6.6
Cédric Bosdonnat
2016-Jun-22 09:45 UTC
[Libguestfs] [PATCH 1/4] p2v: use yast2 lan on SUSE distros rather than NM
NetworkManager isn't provided on SLES. As yast2 lan is available on all
openSUSE / SLE distro, use it instead.
---
p2v/gui.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/p2v/gui.c b/p2v/gui.c
index e720002..b50cadf 100644
--- a/p2v/gui.c
+++ b/p2v/gui.c
@@ -51,6 +51,7 @@
#include <config.h>
+#include <sys/stat.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
@@ -654,7 +655,11 @@ test_connection_ok (gpointer user_data)
static void
configure_network_button_clicked (GtkWidget *w, gpointer data)
{
- ignore_value (system ("nm-connection-editor &"));
+ struct stat statbuf;
+ if (stat ("/sbin/yast2", &statbuf) >= 0)
+ ignore_value (system ("yast2 lan &"));
+ else
+ ignore_value (system ("nm-connection-editor &"));
}
/**
--
2.6.6
Cédric Bosdonnat
2016-Jun-22 09:45 UTC
[Libguestfs] [PATCH 2/4] p2v: fix dependencies for SLES / openSUSE
Use the common denominator for SLES and openSUSE in the dependencies. For example most of NetworkManager pieces and metacity aren't provided on SLES. ifconfig is in the net-tools-deprecated package in openSUSE Factory, which means after openSUSE Leap 42.2. Older versions have it in the net-tools package. Adding this complexity only to add ifconfig because sysadmins prefer it isn't too good: iproute2 is doing the job. --- p2v/dependencies.m4 | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/p2v/dependencies.m4 b/p2v/dependencies.m4 index 635e253..fd20ddd 100644 --- a/p2v/dependencies.m4 +++ b/p2v/dependencies.m4 @@ -119,8 +119,8 @@ ifelse(SUSE,1, pcre libxml2 gtk`'GTK_VERSION - /usr/bin/ssh - /usr/bin/qemu-nbd + qemu-tools + openssh curl ethtool hwdata @@ -129,14 +129,15 @@ ifelse(SUSE,1, smartmontools util-linux xterm - /usr/bin/xinit - /usr/bin/Xorg + xinit + xorg-x11-server xf86-video-* dejavu-fonts - metacity NetworkManager - nm-connection-editor - network-manager-applet - dbus-x11 - net-tools-deprecated + xf86-input-* + icewm-lite + dbus-1-x11 + yast2-network + libyui-qt + SuSEfirewall2 ) -- 2.6.6
Cédric Bosdonnat
2016-Jun-22 09:45 UTC
[Libguestfs] [PATCH 3/4] p2v: add virt-p2v-make-kiwi to generate kiwi config
Kiwi is the tool used by openSUSE / SLES to generate many sort of
disk images. Add a virt-p2v-make-kiwi tool and his documentation to
geneate the p2v appliance kiwi configuration.
---
.gitignore | 3 +
configure.ac | 2 +
p2v/Makefile.am | 31 +++++-
p2v/kiwi-config.sh | 73 +++++++++++++++
p2v/kiwi-config.xml.in | 92 ++++++++++++++++++
p2v/launch-virt-p2v.in | 17 +++-
p2v/virt-p2v-make-disk.pod | 1 +
p2v/virt-p2v-make-kiwi.in | 228 +++++++++++++++++++++++++++++++++++++++++++++
p2v/virt-p2v-make-kiwi.pod | 184 ++++++++++++++++++++++++++++++++++++
p2v/virt-p2v.pod | 1 +
10 files changed, 625 insertions(+), 7 deletions(-)
create mode 100755 p2v/kiwi-config.sh
create mode 100644 p2v/kiwi-config.xml.in
create mode 100644 p2v/virt-p2v-make-kiwi.in
create mode 100644 p2v/virt-p2v-make-kiwi.pod
diff --git a/.gitignore b/.gitignore
index d48dee3..c249cb0 100644
--- a/.gitignore
+++ b/.gitignore
@@ -329,6 +329,7 @@ Makefile.in
/p2v/stamp-virt-p2v.pod
/p2v/stamp-virt-p2v-make-disk.pod
/p2v/stamp-virt-p2v-make-kickstart.pod
+/p2v/stamp-virt-p2v-make-kiwi.pod
/p2v/test-virt-p2v-pxe.authorized_keys
/p2v/test-virt-p2v-pxe.id_rsa
/p2v/test-virt-p2v-pxe.id_rsa.pub
@@ -346,6 +347,8 @@ Makefile.in
/p2v/virt-p2v-make-disk.1
/p2v/virt-p2v-make-kickstart
/p2v/virt-p2v-make-kickstart.1
+/p2v/virt-p2v-make-kiwi
+/p2v/virt-p2v-make-kiwi.1
/perl/_build
/perl/bindtests.pl
/perl/blib
diff --git a/configure.ac b/configure.ac
index 9ec8ac4..00941e0 100644
--- a/configure.ac
+++ b/configure.ac
@@ -157,6 +157,8 @@ AC_CONFIG_FILES([p2v/virt-p2v-make-disk],
[chmod +x,-w p2v/virt-p2v-make-disk])
AC_CONFIG_FILES([p2v/virt-p2v-make-kickstart],
[chmod +x,-w p2v/virt-p2v-make-kickstart])
+AC_CONFIG_FILES([p2v/virt-p2v-make-kiwi],
+ [chmod +x,-w p2v/virt-p2v-make-kiwi])
AC_CONFIG_FILES([php/extension/php-for-tests.sh],
[chmod +x,-w php/extension/php-for-tests.sh])
AC_CONFIG_FILES([pick-guests.pl],
diff --git a/p2v/Makefile.am b/p2v/Makefile.am
index 4c4994b..525b80c 100644
--- a/p2v/Makefile.am
+++ b/p2v/Makefile.am
@@ -21,6 +21,8 @@ EXTRA_DIST = \
$(TESTS) $(SLOW_TESTS) \
dependencies.m4 \
issue \
+ kiwi-config.sh \
+ kiwi-config.xml.in \
launch-virt-p2v.in \
p2v.ks.in \
p2v.service \
@@ -30,7 +32,9 @@ EXTRA_DIST = \
virt-p2v-make-disk.in \
virt-p2v-make-disk.pod \
virt-p2v-make-kickstart.in \
- virt-p2v-make-kickstart.pod
+ virt-p2v-make-kickstart.pod \
+ virt-p2v-make-kiwi.in \
+ virt-p2v-make-kiwi.pod
# Don't clean ssh_host_rsa_key{,.pub} or id_rsa{,.pub} since those
# consume system entropy to regenerate.
@@ -41,6 +45,7 @@ CLEANFILES = \
stamp-virt-p2v.pod \
stamp-virt-p2v-make-disk.pod \
stamp-virt-p2v-make-kickstart.pod \
+ stamp-virt-p2v-make-kiwi.pod \
test-virt-p2v-pxe.authorized_keys \
test-virt-p2v-pxe.img \
test-virt-p2v-pxe.vmlinuz \
@@ -49,7 +54,8 @@ CLEANFILES = \
virt-p2v.1 \
virt-p2v.img \
virt-p2v-make-disk.1 \
- virt-p2v-make-kickstart.1
+ virt-p2v-make-kickstart.1 \
+ virt-p2v-make-kiwi.1
# Although virt-p2v is a regular binary, it is not usually installed
# in /usr/bin since it only functions when contained in an ISO or PXE
@@ -96,7 +102,7 @@ virt_p2v_LDADD = \
../gnulib/lib/libgnu.la
# Scripts to build the disk image, USB key, or kickstart.
-bin_SCRIPTS = virt-p2v-make-disk virt-p2v-make-kickstart
+bin_SCRIPTS = virt-p2v-make-disk virt-p2v-make-kickstart virt-p2v-make-kiwi
dependencies_files = \
dependencies.archlinux \
@@ -115,6 +121,8 @@ virtp2vdatadir = $(datadir)/virt-p2v
virtp2vdata_DATA = \
$(dependencies_files) \
issue \
+ kiwi-config.sh \
+ kiwi-config.xml.in \
launch-virt-p2v \
p2v.ks.in \
p2v.service
@@ -130,12 +138,14 @@ launch-virt-p2v: launch-virt-p2v.in
man_MANS = \
virt-p2v.1 \
virt-p2v-make-disk.1 \
- virt-p2v-make-kickstart.1
+ virt-p2v-make-kickstart.1 \
+ virt-p2v-make-kiwi.1
noinst_DATA = \
$(top_builddir)/website/virt-p2v.1.html \
$(top_builddir)/website/virt-p2v-make-disk.1.html \
- $(top_builddir)/website/virt-p2v-make-kickstart.1.html
+ $(top_builddir)/website/virt-p2v-make-kickstart.1.html \
+ $(top_builddir)/website/virt-p2v-make-kiwi.1.html
virt-p2v.1 $(top_builddir)/website/virt-p2v.1.html: stamp-virt-p2v.pod
@@ -170,6 +180,17 @@ stamp-virt-p2v-make-kickstart.pod:
virt-p2v-make-kickstart.pod
$<
touch $@
+virt-p2v-make-kiwi.1 $(top_builddir)/website/virt-p2v-make-kiwi.1.html:
stamp-virt-p2v-make-kiwi.pod
+
+stamp-virt-p2v-make-kiwi.pod: virt-p2v-make-kiwi.pod
+ $(PODWRAPPER) \
+ --man virt-p2v-make-kiwi.1 \
+ --html $(top_builddir)/website/virt-p2v-make-kiwi.1.html \
+ --license GPLv2+ \
+ --warning safe \
+ $<
+ touch $@
+
# Run virt-p2v locally either directly or in a VM.
# See guestfs-hacking(1) section "Running virt-p2v"
diff --git a/p2v/kiwi-config.sh b/p2v/kiwi-config.sh
new file mode 100755
index 0000000..b24fd3b
--- /dev/null
+++ b/p2v/kiwi-config.sh
@@ -0,0 +1,73 @@
+#!/bin/bash
+#===============+# FILE : config.sh
+#----------------
+# PROJECT : OpenSuSE KIWI Image System
+# COPYRIGHT : (c) 2006 SUSE LINUX Products GmbH. All rights reserved
+# :
+# AUTHOR : Marcus Schaefer <ms@suse.de>
+#=====================================+# Functions...
+#--------------------------------------
+test -f /.kconfig && . /.kconfig
+test -f /.profile && . /.profile
+
+#=====================================+# Greeting...
+#--------------------------------------
+echo "Configure image: [$kiwi_iname]..."
+
+#=====================================+# Mount system filesystems
+#--------------------------------------
+baseMount
+
+#=====================================+# Setup baseproduct link
+#--------------------------------------
+suseSetupProduct
+
+#=====================================+# Add missing gpg keys to rpm
+#--------------------------------------
+suseImportBuildKey
+
+#=====================================+# Activate services
+#--------------------------------------
+suseInsertService p2v
+
+#=====================================+# Setup default target, multi-user
+#--------------------------------------
+baseSetRunlevel 3
+
+#=========================================+# remove package docs
+#------------------------------------------
+rm -rf /usr/share/doc/packages/*
+rm -rf /usr/share/doc/manual/*
+rm -rf /opt/kde*
+
+# Update the default getty target to login automatically as root without
+# prompting for a password
+sed -i 's/^ExecStart=\(.*\)/ExecStart=\1 -a root/' \
+ /usr/lib/systemd/system/getty@.service
+
+# Reserve tty1 as a getty so we can document it clearly
+echo ReserveVT=1 >> /etc/systemd/logind.conf
+
+sed -i 's/^ROOT_USES_LANG=.*$/ROOT_USES_LANG="yes"/' \
+ /etc/sysconfig/language
+
+#=====================================+# SuSEconfig
+#--------------------------------------
+suseConfig
+
+#=====================================+# Umount kernel filesystems
+#--------------------------------------
+baseCleanMount
+
+exit 0
diff --git a/p2v/kiwi-config.xml.in b/p2v/kiwi-config.xml.in
new file mode 100644
index 0000000..680076b
--- /dev/null
+++ b/p2v/kiwi-config.xml.in
@@ -0,0 +1,92 @@
+<?xml version="1.0" encoding="utf-8"?>
+<image schemaversion="6.2" name="p2v-__KIWI_BOOT__"
displayname="p2v___PACKAGE_VERSION_____KIWI_BOOT__">
+ <description type="system">
+ <author>Marcus Schäfer</author>
+ <contact>ms@suse.com</contact>
+ <specification>P2V __PACKAGE_VERSION__</specification>
+ </description>
+ <profiles>
+ <profile name="vmxFlavour" description="VMX with default
kernel" import="true"/>
+ <profile name="netboot" description="compressed rootfs
image for pxe"/>
+ </profiles>
+ <preferences>
+ <type image="iso" primary="true"
boot="isoboot/suse-__KIWI_BOOT__" flags="overlay"
hybrid="true" firmware="uefi"
kernelcmdline="splash"/>
+ <version>__PACKAGE_VERSION__</version>
+ <packagemanager>zypper</packagemanager>
+ <locale>en_US</locale>
+ <keytable>us.map.gz</keytable>
+ <hwclock>utc</hwclock>
+ <bootloader-theme>__BRANDING__</bootloader-theme>
+ <bootsplash-theme>__BRANDING__</bootsplash-theme>
+ <rpm-excludedocs>true</rpm-excludedocs>
+ <rpm-check-signatures>false</rpm-check-signatures>
+ </preferences>
+ <preferences profiles="netboot">
+ <type image="pxe" filesystem="overlayfs"
boot="netboot/suse-__KIWI_BOOT__">
+ <pxedeploy server="192.168.100.2"
blocksize="4096">
+ <partitions device="/dev/sda">
+ <partition type="swap" number="1"
size="5"/>
+ <partition type="L" number="2"
size="image" mountpoint="/" target="true"/>
+ <partition type="L" number="3"
target="false"/>
+ </partitions>
+ <union ro="/dev/sda2" rw="/dev/sda3"
type="overlayfs"/>
+ </pxedeploy>
+ </type>
+ </preferences>
+ <preferences profiles="vmxFlavour">
+ <type image="vmx" filesystem="ext3"
boot="vmxboot/suse-__KIWI_BOOT__" format="vmdk"
bootloader="grub2" firmware="uefi"
kernelcmdline="splash" bootpartition="false">
+ <systemdisk name="systemVG"/>
+ <machine memory="512" guestOS="suse"
HWversion="4">
+ <vmdisk id="0" controller="ide"/>
+ <vmnic driver="e1000" interface="0"
mode="bridged"/>
+ </machine>
+ </type>
+ </preferences>
+ <users group="root">
+ <user password="p2v" pwdformat="plain"
home="/root" name="root"/>
+ </users>
+ <!--__REPOS__-->
+ <packages type="image" patternType="onlyRequired">
+ <package name="__BASE_PATTERN__"/>
+ <package name="plymouth-branding-__BRANDING__"
bootinclude="true"/>
+ <package name="grub2-branding-__BRANDING__"
bootinclude="true"/>
+ <package name="iputils"/>
+ <package name="grub2"/>
+ <package name="grub2-x86_64-efi"/>
+ <package name="syslinux"/>
+ <package name="lvm2"/>
+ <package name="plymouth"/>
+ <package name="fontconfig"/>
+ <package name="fonts-config"/>
+ <package name="tar"/>
+ <package name="systemd"/>
+ <package name="systemd-sysvinit"/>
+ <package name="dracut"/>
+ <package name="wicked"/>
+ <package name="iproute2"/>
+ <package name="sudo"/>
+ <package name="dhcp-client"/>
+ <package name="which"/>
+ <!-- virt-p2v dependencies from dependencies.suse -->
+<!--__DEPENDENCIES__-->
+ </packages>
+ <packages type="iso">
+ <package name="gfxboot-branding-__BRANDING__"
bootinclude="true" bootdelete="true"/>
+ </packages>
+ <packages type="image" profiles="vmxFlavour">
+ <package name="kernel-default"
replaces="kernel-xen"/>
+ <package name="kernel-default"
replaces="xen-kmp-default"/>
+ <package name="kernel-default"
replaces="xen-libs"/>
+ <package name="kernel-default"
replaces="xen-tools"/>
+ <package name="kernel-default" replaces="xen"/>
+ <package name="gfxboot-branding-__BRANDING__"
bootinclude="true" bootdelete="true"/>
+ </packages>
+ <packages type="bootstrap">
+ <package name="udev"/>
+ <package name="filesystem"/>
+ <package name="glibc-locale"/>
+ <package name="cracklib-dict-full"/>
+ <package name="ca-certificates"/>
+ <package name="__RELEASE_PKG__"/>
+ </packages>
+</image>
diff --git a/p2v/launch-virt-p2v.in b/p2v/launch-virt-p2v.in
index 3e4f1f9..65481e4 100755
--- a/p2v/launch-virt-p2v.in
+++ b/p2v/launch-virt-p2v.in
@@ -30,8 +30,21 @@ else
# self again to run the window manager and virt-p2v.
if [ "$1" = "run" ]; then
cd /
- metacity &
- nm-applet &
+
+ ID+ if test -f /etc/os-release; then
+ . /etc/os-release
+ fi
+
+ case "$ID" in
+ sles|opensuse)
+ # not all versions of SLE / openSUSE ship metacity and
nm-applet
+ icewm &
+ ;;
+ *)
+ metacity &
+ nm-applet &
+ esac
exec @libexecdir@/virt-p2v --iso
else
xinit "$0" run
diff --git a/p2v/virt-p2v-make-disk.pod b/p2v/virt-p2v-make-disk.pod
index 58e845c..0765dd8 100644
--- a/p2v/virt-p2v-make-disk.pod
+++ b/p2v/virt-p2v-make-disk.pod
@@ -184,6 +184,7 @@ L</FILES> above). If not set, a compiled-in location
is used.
L<virt-p2v(1)>,
L<virt-p2v-make-kickstart(1)>,
+L<virt-p2v-make-kiwi(1)>,
L<virt-v2v(1)>,
L<http://libguestfs.org/>.
diff --git a/p2v/virt-p2v-make-kiwi.in b/p2v/virt-p2v-make-kiwi.in
new file mode 100644
index 0000000..e493bd4
--- /dev/null
+++ b/p2v/virt-p2v-make-kiwi.in
@@ -0,0 +1,228 @@
+#!/bin/bash -
+# @configure_input@
+# virt-p2v-make-kiwi
+# Copyright (C) 2016 SUSE.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+unset CDPATH
+
+program="virt-p2v-make-kiwi"
+version="@PACKAGE_VERSION@"
+
+TEMP=`getopt \
+ -o o:V \
+ --long help,inject-ssh-identity:,output:,version \
+ -n $program -- "$@"`
+if [ $? != 0 ]; then
+ echo "$program: problem parsing the command line arguments"
+ exit 1
+fi
+eval set -- "$TEMP"
+
+usage ()
+{
+ echo "Usage:"
+ echo " $program [--options] [-o kiwi-folder]"
+ echo
+ echo "Read $program(1) man page for more information."
+ exit $1
+}
+
+output=p2v.kiwi
+ssh_identity+
+while true; do
+ case "$1" in
+ --inject-ssh-identity)
+ ssh_identity="$2"
+ shift 2;;
+ -o|--output)
+ output="$2"
+ shift 2;;
+ -V|--version)
+ echo "$program $version"
+ exit 0;;
+ --help)
+ usage 0;;
+ --)
+ shift
+ break;;
+ *)
+ echo "internal error ($1)"
+ exit 1;;
+ esac
+done
+
+set -e
+
+# Deal with stupid autotools libexecdir-not-expandable crap.
+prefix="@prefix@"
+exec_prefix="@exec_prefix@"
+libexecdir="@libexecdir@"
+
+if [ -n "$VIRT_P2V_DATA_DIR" ]; then
+ datadir="$VIRT_P2V_DATA_DIR"
+ host_libexecdir="$VIRT_P2V_DATA_DIR"
+else
+ datadir="@datadir@/virt-p2v"
+ host_libexecdir="@libexecdir@"
+fi
+
+# Dependencies. Since kiwi is SUSE-specific, only include
+# dependencies.suse here.
+depsfile="$datadir/dependencies.suse"
+if [ ! -f "$depsfile" ]; then
+ echo "$0: cannot find dependencies file ($depsfile)"
+ exit 1
+fi
+dependencies+while read line; do
+ if [ -n "$line" ]; then
+ depname=$(echo $line | awk '{gsub(/ /, "", $0);
print}')
+ pkg=" <package name=\"$depname\"/>"
+ if [ -z "$dependencies" ]; then
+ dependencies="$pkg"
+ else
+ dependencies="$dependencies
+$pkg"
+ fi
+ fi
+done < $depsfile
+
+# Compute the distro-dependent pieces for kiwi
+branding+release_pkg+base_pattern+kiwi_boot+repos+. /etc/os-release
+case "$NAME" in
+ SLES)
+ branding="SLE"
+ release_pkg="sles-release"
+ base_pattern="patterns-sles-Minimal"
+ case "$VERSION_ID" in
+ 12)
+ kiwi_boot="SLES12"
+
repos="http://download.suse.de/ibs/SUSE:/SLE-12:/Update/standard
+
http://download.suse.de/ibs/SUSE:/SLE-12:/GA/standard"
+ ;;
+ 12.1)
+ kiwi_boot="SLES12"
+
repos="http://download.suse.de/ibs/SUSE:/SLE-12-SP1:/Update/standard
+ http://download.suse.de/ibs/SUSE:/SLE-12-SP1:/GA/standard
+ http://download.suse.de/ibs/SUSE:/SLE-12:/Update/standard
+
http://download.suse.de/ibs/SUSE:/SLE-12:/GA/standard"
+ ;;
+ *)
+ echo "Unsupported distribution $NAME $VERSION_ID"
+ exit 1;;
+ esac;;
+ openSUSE*)
+ branding="openSUSE"
+ release_pkg="openSUSE-release"
+ base_pattern="patterns-openSUSE-base"
+ case "$VERSION" in
+ 13.1\ *)
+ kiwi_boot="13.1"
+ repos="obs://13.1/repo/oss"
+ ;;
+ 13.2\ *)
+ kiwi_boot="13.2"
+ repos="obs://13.2/repo/oss"
+ ;;
+ 42.1)
+ kiwi_boot="leap42.1"
+ repos="obs://leap/42.1/repo/oss"
+ ;;
+ *\ \(Tumbleweed\))
+ kiwi_boot="leap42.1"
+ repos="obs://openSUSE:Factory/standard"
+ ;;
+ *)
+ echo "Unsupported distribution $NAME $VERSION_ID"
+ exit 1;;
+ esac;;
+ *)
+ echo "Unsupported distribution $NAME $VERSION"
+ exit 1;;
+esac
+
+# Compute the repos
+repos_xml+for repo in $repos; do
+ repos_xml=" <repository type=\"rpm-md\">\n
<source path=\"$repo\"/>\n
</repository>\n$repos_xml"
+done
+
+mkdir $output
+cp $datadir/kiwi-config.sh $output/config.sh
+
+mkdir -p $output/root/etc/sysconfig/network
+cat >$output/root/etc/sysconfig/network/ifcfg-eth0 << EOF
+BOOTPROTO='dhcp'
+MTU=''
+REMOTE_IPADDR=''
+STARTMODE='onboot'
+EOF
+
+mkdir -p $output/root/etc/systemd/system
+cp $datadir/p2v.service $output/root/etc/systemd/system
+
+mkdir -p $output/root/etc/udev/rules.d
+cat >$output/root/etc/udev/rules.d/70-persistent-net.rules <<EOF
+SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="?*", ATTR{dev_id}=="0x0",
ATTR{type}=="1", KERNEL=="?*", NAME="eth0"
+EOF
+
+cp $datadir/issue $output/root/etc/issue
+
+mkdir -p $output/root/usr/bin
+cp $datadir/launch-virt-p2v $output/root/usr/bin
+
+mkdir -p $output/root/$libexecdir
+cp $host_libexecdir/virt-p2v $output/root/$libexecdir
+
+if test "z$ssh_identity" != "z"; then
+ mkdir -p $output/root/var/tmp
+ cp $ssh_identity $output/root/var/tmp/id_rsa
+ chmod 0600 $output/root/var/tmp/id_rsa
+fi
+
+# Now generate the final kiwi config, substituting as necessary.
+@AWK@ \
+ -v "dependencies=$dependencies" \
+ -v "md5sum_virt_p2v=$md5sum_virt_p2v" \
+ -v "libexecdir=$libexecdir" \
+ -v "branding=$branding" \
+ -v "release_pkg=$release_pkg" \
+ -v "base_pattern=$base_pattern" \
+ -v "kiwi_boot=$kiwi_boot" \
+ -v "repos=$repos_xml" \
+ '{
+ gsub (/__PACKAGE_NAME__/, "@PACKAGE_NAME@");
+ gsub (/__PACKAGE_VERSION__/, "@PACKAGE_VERSION@");
+ gsub (/__PACKAGE_VERSION_FULL__/, "@PACKAGE_VERSION_FULL@");
+ gsub (/<!--__DEPENDENCIES__-->/, dependencies);
+ gsub (/__LIBEXECDIR__/, libexecdir);
+ gsub (/__BRANDING__/, branding);
+ gsub (/__RELEASE_PKG__/, release_pkg);
+ gsub (/__BASE_PATTERN__/, base_pattern);
+ gsub (/__KIWI_BOOT__/, kiwi_boot);
+ gsub (/<!--__REPOS__-->/, repos);
+ print;
+ }' \
+ $datadir/kiwi-config.xml.in > $output/config.xml
+
+echo "kiwi config folder written to $output"
diff --git a/p2v/virt-p2v-make-kiwi.pod b/p2v/virt-p2v-make-kiwi.pod
new file mode 100644
index 0000000..92556d9
--- /dev/null
+++ b/p2v/virt-p2v-make-kiwi.pod
@@ -0,0 +1,184 @@
+=head1 NAME
+
+virt-p2v-make-kiwi - Build the virt-p2v kiwi configuration
+
+=head1 SYNOPSIS
+
+ virt-p2v-make-kiwi [--inject-ssh-identity path] [-o kiwi-folder]
+
+=head1 DESCRIPTION
+
+L<virt-p2v(1)> converts a physical machine to run virtualized on KVM,
+managed by libvirt, OpenStack, oVirt, Red Hat Enterprise
+Virtualisation (RHEV), or one of the other targets supported by
+L<virt-v2v(1)>.
+
+Kiwi is a tool used mainly by SUSE Linux Enterprise and openSUSE to
+build live CDs, make appliances and so on. It is driven by a few files
+including an xml description of the machine.
+
+virt-p2v-make-kiwi builds a folder containing all the pieces needed for
+kiwi to build a bootable P2V live CD ISO, USB key, or PXE image. This tool
+only builds the kiwi configuration, but this manual page describes some of
+the ways you can use the kickstart file.
+
+=head1 BUILDING THE KIWI CONFIGURATION
+
+Using virt-p2v-make-kiwi is very simple:
+
+ virt-p2v-make-kiwi
+
+will build a kiwi configuration based on the current machine's
distribution.
+
+To control the name of the output folder, use the I<-o> parameter.
+
+=head1 BUILDING A LIVE CD / ISO
+
+Once you have the kiwi configuration folder, you can use L<kiwi(1)> to
make a
+live CD:
+
+ sudo kiwi --build p2v.kiwi -d build --type iso
+
+Before running this, you may have to tweak the C<config.xml> file
+to change the locale and keyboard mapping to the one you need.
+
+If running on a SUSE Linux Entreprise Server, add the path to your packages
repositories
+using the C<--ignore-repos> and C<--add-repo> kiwi parameters.
+
+The generated ISO image will be placed in the C<build> folder.
+
+=head1 BUILDING A BOOTABLE USB KEY
+
+Use the L<dd(1)> program to write the ISO created above to a USB key:
+
+ sudo dd if=path/to/p2v.iso of=/dev/sdX
+
+=head1 BUILDING A PXE BOOT IMAGE
+
+To create a PXE boot image, run kiwi in such a way:
+
+ sudo kiwi --build $PWD/p2v.kiwi -d build --add-profile netboot --type pxe
+
+For more details on how to use the generated image, report to the kiwi
documentation
+on PXE images: L<https://doc.opensuse.org/projects/kiwi/doc/#chap.pxe>
+
+=head1 ADDING AN SSH IDENTITY
+
+You can inject an SSH identity (private key) file to the kiwi config and
+hence into the ISO using the I<--inject-ssh-identity> option. Note
+that you I<cannot> inject a key once the ISO has been built.
+
+First create a key pair. It must have an empty passphrase:
+
+ ssh-keygen -t rsa -N '' -f id_rsa
+
+This creates a private key (C<id_rsa>) and a public key
+(C<id_rsa.pub>) pair. The public key should be appended to the
+C<authorized_keys> file on the virt-v2v conversion server (usually to
+C</root/.ssh/authorized_keys>).
+
+The private key should be added to the kiwi config and then
+discarded:
+
+ virt-p2v-make-kiwi [...] --inject-ssh-identity id_rsa
+ rm id_rsa
+
+The ISO can then be built from the kickstart in the usual way (see
+above), and it will contain the embedded SSH identity
+(F</var/tmp/id_rsa>).
+
+When booting virt-p2v, specify the URL of the injected file like this:
+
+ │ User name: [root_____________________________] │
+ │ │
+ │ Password: [ <leave this field blank> ] │
+ │ │
+ │ SSH Identity URL: [file:///var/tmp/id_rsa___________] │
+
+or if using the kernel command line, add:
+
+ p2v.identity=file:///var/tmp/id_rsa
+
+For more information, see L<virt-p2v(1)/SSH IDENTITIES>.
+
+=head1 OPTIONS
+
+=over 4
+
+=item B<--help>
+
+Display help.
+
+=item B<--inject-ssh-identity> id_rsa
+
+Add an SSH identity (private key) file into the kickstart.
+See L</ADDING AN SSH IDENTITY> above.
+
+=item B<-o> OUTPUT
+
+=item B<--output> OUTPUT
+
+Write kiwi configuration to the C<OUTPUT> folder. If not specified, the
default is
+F<p2v.kiwi> in the current directory.
+
+=item B<-V>
+
+=item B<--version>
+
+Display version number and exit.
+
+=back
+
+=head1 FILES
+
+=over 4
+
+=item F<$libexecdir/virt-p2v>
+
+The L<virt-p2v(1)> binary which is copied into the kiwi configuration.
+
+The location of the binary can be changed by setting the
+C<VIRT_P2V_DATA_DIR> environment variable.
+
+=item F<$datadir/virt-p2v/issue>
+
+=item F<$datadir/virt-p2v/launch-virt-p2v.in>
+
+=item F<$datadir/virt-p2v/kiwi>
+
+=item F<$datadir/virt-p2v/p2v.service>
+
+Various data files that are used to make the kiwi appliance.
+
+The location of these files can be changed by setting the
+C<VIRT_P2V_DATA_DIR> environment variable.
+
+=back
+
+=head1 ENVIRONMENT VARIABLES
+
+=over 4
+
+=item C<VIRT_P2V_DATA_DIR>
+
+The directory where virt-p2v-make-kiwi looks for data files and
+the virt-p2v binary (see L</FILES> above). If not set, a compiled-in
+location is used.
+
+=back
+
+=head1 SEE ALSO
+
+L<virt-p2v(1)>,
+L<virt-p2v-make-disk(1)>,
+L<virt-v2v(1)>,
+L<kiwi(1)>,
+L<http://libguestfs.org/>.
+
+=head1 AUTHORS
+
+Cédric Bosdonnat
+
+=head1 COPYRIGHT
+
+Copyright (C) 2016 SUSE Ltd.
diff --git a/p2v/virt-p2v.pod b/p2v/virt-p2v.pod
index 945d8c2..d013fcf 100644
--- a/p2v/virt-p2v.pod
+++ b/p2v/virt-p2v.pod
@@ -757,6 +757,7 @@ the graphical UI.
L<virt-p2v-make-disk(1)>,
L<virt-p2v-make-kickstart(1)>,
+L<virt-p2v-make-kiwi(1)>,
L<virt-v2v(1)>,
L<qemu-nbd(1)>,
L<ssh(1)>,
--
2.6.6
Cédric Bosdonnat
2016-Jun-22 09:45 UTC
[Libguestfs] [PATCH 4/4] p2v: add -x option to nm-online
On distros not running NetworkManager, use the nm-online -x parameter to exit quickly. The network connection will be checked just after anyway when attempting to connect to the conversion server using ssh. --- p2v/utils.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/p2v/utils.c b/p2v/utils.c index c4f82cd..746093b 100644 --- a/p2v/utils.c +++ b/p2v/utils.c @@ -139,7 +139,7 @@ get_if_vendor (const char *if_name, int truncate) } /* XXX We could make this configurable. */ -#define NETWORK_ONLINE_COMMAND "nm-online -t 30" +#define NETWORK_ONLINE_COMMAND "nm-online -t 30 -x" /** * Wait for the network to come online, but don't error out if that -- 2.6.6
Richard W.M. Jones
2016-Jun-22 09:58 UTC
Re: [Libguestfs] [PATCH 1/4] p2v: use yast2 lan on SUSE distros rather than NM
On Wed, Jun 22, 2016 at 11:45:32AM +0200, Cédric Bosdonnat wrote:> NetworkManager isn't provided on SLES. As yast2 lan is available on all > openSUSE / SLE distro, use it instead. > --- > p2v/gui.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/p2v/gui.c b/p2v/gui.c > index e720002..b50cadf 100644 > --- a/p2v/gui.c > +++ b/p2v/gui.c > @@ -51,6 +51,7 @@ > > #include <config.h> > > +#include <sys/stat.h> > #include <stdio.h> > #include <stdlib.h> > #include <stdarg.h>There's an informal ordering for header files, and putting <sys/stat.h> at the very top isn't in that tradition!> @@ -654,7 +655,11 @@ test_connection_ok (gpointer user_data) > static void > configure_network_button_clicked (GtkWidget *w, gpointer data) > { > - ignore_value (system ("nm-connection-editor &")); > + struct stat statbuf; > + if (stat ("/sbin/yast2", &statbuf) >= 0) > + ignore_value (system ("yast2 lan &")); > + else > + ignore_value (system ("nm-connection-editor &"));How about using access ("/sbin/yast2", X_OK)? Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-builder quickly builds VMs from scratch http://libguestfs.org/virt-builder.1.html
Richard W.M. Jones
2016-Jun-22 09:59 UTC
Re: [Libguestfs] [PATCH 2/4] p2v: fix dependencies for SLES / openSUSE
On Wed, Jun 22, 2016 at 11:45:33AM +0200, Cédric Bosdonnat wrote:> Use the common denominator for SLES and openSUSE in the dependencies. > For example most of NetworkManager pieces and metacity aren't provided > on SLES. > > ifconfig is in the net-tools-deprecated package in openSUSE Factory, > which means after openSUSE Leap 42.2. Older versions have it in the > net-tools package. Adding this complexity only to add ifconfig because > sysadmins prefer it isn't too good: iproute2 is doing the job. > --- > p2v/dependencies.m4 | 19 ++++++++++--------- > 1 file changed, 10 insertions(+), 9 deletions(-) > > diff --git a/p2v/dependencies.m4 b/p2v/dependencies.m4 > index 635e253..fd20ddd 100644 > --- a/p2v/dependencies.m4 > +++ b/p2v/dependencies.m4 > @@ -119,8 +119,8 @@ ifelse(SUSE,1, > pcre > libxml2 > gtk`'GTK_VERSION > - /usr/bin/ssh > - /usr/bin/qemu-nbd > + qemu-tools > + openssh > curl > ethtool > hwdata > @@ -129,14 +129,15 @@ ifelse(SUSE,1, > smartmontools > util-linux > xterm > - /usr/bin/xinit > - /usr/bin/Xorg > + xinit > + xorg-x11-server > xf86-video-* > dejavu-fonts > - metacity > NetworkManager > - nm-connection-editor > - network-manager-applet > - dbus-x11 > - net-tools-deprecated > + xf86-input-* > + icewm-lite > + dbus-1-x11 > + yast2-network > + libyui-qt > + SuSEfirewall2 > ) > --ACK. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-df lists disk usage of guests without needing to install any software inside the virtual machine. Supports Linux and Windows. http://people.redhat.com/~rjones/virt-df/
Richard W.M. Jones
2016-Jun-22 10:03 UTC
Re: [Libguestfs] [PATCH 4/4] p2v: add -x option to nm-online
On Wed, Jun 22, 2016 at 11:45:35AM +0200, Cédric Bosdonnat wrote:> On distros not running NetworkManager, use the nm-online -x parameter > to exit quickly. The network connection will be checked just after > anyway when attempting to connect to the conversion server using ssh. > --- > p2v/utils.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/p2v/utils.c b/p2v/utils.c > index c4f82cd..746093b 100644 > --- a/p2v/utils.c > +++ b/p2v/utils.c > @@ -139,7 +139,7 @@ get_if_vendor (const char *if_name, int truncate) > } > > /* XXX We could make this configurable. */ > -#define NETWORK_ONLINE_COMMAND "nm-online -t 30" > +#define NETWORK_ONLINE_COMMAND "nm-online -t 30 -x" > > /** > * Wait for the network to come online, but don't error out if that > -- > 2.6.6ACK patches 3 & 4. Thanks, Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-p2v converts physical machines to virtual machines. Boot with a live CD or over the network (PXE) and turn machines into KVM guests. http://libguestfs.org/virt-v2v
Richard W.M. Jones
2016-Jun-24 10:01 UTC
Re: [Libguestfs] [PATCH 4/4] p2v: add -x option to nm-online
On Wed, Jun 22, 2016 at 11:45:35AM +0200, Cédric Bosdonnat wrote:> On distros not running NetworkManager, use the nm-online -x parameter > to exit quickly. The network connection will be checked just after > anyway when attempting to connect to the conversion server using ssh. > --- > p2v/utils.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/p2v/utils.c b/p2v/utils.c > index c4f82cd..746093b 100644 > --- a/p2v/utils.c > +++ b/p2v/utils.c > @@ -139,7 +139,7 @@ get_if_vendor (const char *if_name, int truncate) > } > > /* XXX We could make this configurable. */ > -#define NETWORK_ONLINE_COMMAND "nm-online -t 30" > +#define NETWORK_ONLINE_COMMAND "nm-online -t 30 -x" > > /** > * Wait for the network to come online, but don't error out if thatI had to revert this as it breaks p2v/test-virt-p2v-pxe.sh (only run when you use "make check-slow" or "make -C p2v run-virt-p2v-non-gui-conversion"). I'm not actually sure why it breaks it, since the VM in that test is running NetworkManager. It could be some kind of boot ordering issue. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-builder quickly builds VMs from scratch http://libguestfs.org/virt-builder.1.html
Apparently Analagous Threads
- [PATCH v3 0/4] virt-p2v support for openSUSE / SLES
- [PATCH v2 0/4] virt-p2v support for openSUSE / SLES
- [PATCH 0/2] Remove virt-p2v from libguestfs
- [p2v PATCH] Document the root password for the disk images.
- [PATCH] p2v: Compress virt-p2v binary and store it in $libdir/virt-p2v (RHBZ#1382275).