Linux Virtualization - Jul 2018 - [PATCH v2 net-next 0/4] vhost_net: Avoid vq kicks during busyloop

Under heavy load vhost tx busypoll tend not to suppress vq kicks, which
causes poor guest tx performance. The detailed scenario is described in
commitlog of patch 2.
Rx seems not to have that serious problem, but for consistency I made a
similar change on rx to avoid rx wakeups (patch 3).
Additionary patch 4 is to avoid rx kicks under heavy load during
busypoll.

Tx performance is greatly improved by this change. I don't see notable
performance change on rx with this series though.

Performance numbers (tx):

- Bulk transfer from guest to external physical server.
    [Guest]->vhost_net->tap--(XDP_REDIRECT)-->i40e --(wire)-->
[Server]
- Set 10us busypoll.
- Guest disables checksum and TSO because of host XDP.
- Measured single flow Mbps by netperf, and kicks by perf kvm stat
  (EPT_MISCONFIG event).

                            Before              After
                          Mbps  kicks/s      Mbps  kicks/s
UDP_STREAM 1472byte              247758                 27
                Send   3645.37            6958.10
                Recv   3588.56            6958.10
              1byte                9865                 37
                Send      4.34               5.43
                Recv      4.17               5.26
TCP_STREAM             8801.03    45794   9592.77     2884

v2:
- Split patches into 3 parts (renaming variables, tx-kick fix, rx-wakeup
  fix).
- Avoid rx-kicks too (patch 4).
- Don't memorize endtime as it is not needed for now.

Toshiaki Makita (4):
  vhost_net: Rename local variables in vhost_net_rx_peek_head_len
  vhost_net: Avoid tx vring kicks during busyloop
  vhost_net: Avoid rx queue wake-ups during busypoll
  vhost_net: Avoid rx vring kicks during busyloop

 drivers/vhost/net.c | 95 +++++++++++++++++++++++++++++++++--------------------
 1 file changed, 60 insertions(+), 35 deletions(-)

-- 
1.8.3.1

So we can easily see which variable is for which, tx or rx.

Signed-off-by: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp>
---
 drivers/vhost/net.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 29756d8..3939c50 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -647,39 +647,39 @@ static void vhost_rx_signal_used(struct
vhost_net_virtqueue *nvq)
 
 static int vhost_net_rx_peek_head_len(struct vhost_net *net, struct sock *sk)
 {
-	struct vhost_net_virtqueue *rvq = &net->vqs[VHOST_NET_VQ_RX];
-	struct vhost_net_virtqueue *nvq = &net->vqs[VHOST_NET_VQ_TX];
-	struct vhost_virtqueue *vq = &nvq->vq;
+	struct vhost_net_virtqueue *rnvq = &net->vqs[VHOST_NET_VQ_RX];
+	struct vhost_net_virtqueue *tnvq = &net->vqs[VHOST_NET_VQ_TX];
+	struct vhost_virtqueue *tvq = &tnvq->vq;
 	unsigned long uninitialized_var(endtime);
-	int len = peek_head_len(rvq, sk);
+	int len = peek_head_len(rnvq, sk);
 
-	if (!len && vq->busyloop_timeout) {
+	if (!len && tvq->busyloop_timeout) {
 		/* Flush batched heads first */
-		vhost_rx_signal_used(rvq);
+		vhost_rx_signal_used(rnvq);
 		/* Both tx vq and rx socket were polled here */
-		mutex_lock_nested(&vq->mutex, 1);
-		vhost_disable_notify(&net->dev, vq);
+		mutex_lock_nested(&tvq->mutex, 1);
+		vhost_disable_notify(&net->dev, tvq);
 
 		preempt_disable();
-		endtime = busy_clock() + vq->busyloop_timeout;
+		endtime = busy_clock() + tvq->busyloop_timeout;
 
 		while (vhost_can_busy_poll(&net->dev, endtime) &&
 		       !sk_has_rx_data(sk) &&
-		       vhost_vq_avail_empty(&net->dev, vq))
+		       vhost_vq_avail_empty(&net->dev, tvq))
 			cpu_relax();
 
 		preempt_enable();
 
-		if (!vhost_vq_avail_empty(&net->dev, vq))
-			vhost_poll_queue(&vq->poll);
-		else if (unlikely(vhost_enable_notify(&net->dev, vq))) {
-			vhost_disable_notify(&net->dev, vq);
-			vhost_poll_queue(&vq->poll);
+		if (!vhost_vq_avail_empty(&net->dev, tvq)) {
+			vhost_poll_queue(&tvq->poll);
+		} else if (unlikely(vhost_enable_notify(&net->dev, tvq))) {
+			vhost_disable_notify(&net->dev, tvq);
+			vhost_poll_queue(&tvq->poll);
 		}
 
-		mutex_unlock(&vq->mutex);
+		mutex_unlock(&tvq->mutex);
 
-		len = peek_head_len(rvq, sk);
+		len = peek_head_len(rnvq, sk);
 	}
 
 	return len;
-- 
1.8.3.1

Under heavy load vhost busypoll may run without suppressing
notification. For example tx zerocopy callback can push tx work while
handle_tx() is running, then busyloop exits due to vhost_has_work()
condition and enables notification but immediately reenters handle_tx()
because the pushed work was tx. In this case handle_tx() tries to
disable notification again, but when using event_idx it by design
cannot. Then busyloop will run without suppressing notification.
Another example is the case where handle_tx() tries to enable
notification but avail idx is advanced so disables it again. This case
also leads to the same situation with event_idx.

The problem is that once we enter this situation busyloop does not work
under heavy load for considerable amount of time, because notification
is likely to happen during busyloop and handle_tx() immediately enables
notification after notification happens. Specifically busyloop detects
notification by vhost_has_work() and then handle_tx() calls
vhost_enable_notify(). Because the detected work was the tx work, it
enters handle_tx(), and enters busyloop without suppression again.
This is likely to be repeated, so with event_idx we are almost not able
to suppress notification in this case.

To fix this, poll the work instead of enabling notification when
busypoll is interrupted by something. IMHO vhost_has_work() is kind of
interruption rather than a signal to completely cancel the busypoll, so
let's run busypoll after the necessary work is done.

Signed-off-by: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp>
---
 drivers/vhost/net.c | 35 ++++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 13 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 3939c50..811c0e5 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -396,13 +396,10 @@ static inline unsigned long busy_clock(void)
 	return local_clock() >> 10;
 }
 
-static bool vhost_can_busy_poll(struct vhost_dev *dev,
-				unsigned long endtime)
+static bool vhost_can_busy_poll(unsigned long endtime)
 {
-	return likely(!need_resched()) &&
-	       likely(!time_after(busy_clock(), endtime)) &&
-	       likely(!signal_pending(current)) &&
-	       !vhost_has_work(dev);
+	return likely(!need_resched() && !time_after(busy_clock(), endtime)
&&
+		      !signal_pending(current));
 }
 
 static void vhost_net_disable_vq(struct vhost_net *n,
@@ -434,7 +431,8 @@ static int vhost_net_enable_vq(struct vhost_net *n,
 static int vhost_net_tx_get_vq_desc(struct vhost_net *net,
 				    struct vhost_virtqueue *vq,
 				    struct iovec iov[], unsigned int iov_size,
-				    unsigned int *out_num, unsigned int *in_num)
+				    unsigned int *out_num, unsigned int *in_num,
+				    bool *busyloop_intr)
 {
 	unsigned long uninitialized_var(endtime);
 	int r = vhost_get_vq_desc(vq, vq->iov, ARRAY_SIZE(vq->iov),
@@ -443,9 +441,15 @@ static int vhost_net_tx_get_vq_desc(struct vhost_net *net,
 	if (r == vq->num && vq->busyloop_timeout) {
 		preempt_disable();
 		endtime = busy_clock() + vq->busyloop_timeout;
-		while (vhost_can_busy_poll(vq->dev, endtime) &&
-		       vhost_vq_avail_empty(vq->dev, vq))
+		while (vhost_can_busy_poll(endtime)) {
+			if (vhost_has_work(vq->dev)) {
+				*busyloop_intr = true;
+				break;
+			}
+			if (!vhost_vq_avail_empty(vq->dev, vq))
+				break;
 			cpu_relax();
+		}
 		preempt_enable();
 		r = vhost_get_vq_desc(vq, vq->iov, ARRAY_SIZE(vq->iov),
 				      out_num, in_num, NULL, NULL);
@@ -501,20 +505,24 @@ static void handle_tx(struct vhost_net *net)
 	zcopy = nvq->ubufs;
 
 	for (;;) {
+		bool busyloop_intr;
+
 		/* Release DMAs done buffers first */
 		if (zcopy)
 			vhost_zerocopy_signal_used(net, vq);
 
-
+		busyloop_intr = false;
 		head = vhost_net_tx_get_vq_desc(net, vq, vq->iov,
 						ARRAY_SIZE(vq->iov),
-						&out, &in);
+						&out, &in, &busyloop_intr);
 		/* On error, stop handling until the next kick. */
 		if (unlikely(head < 0))
 			break;
 		/* Nothing new?  Wait for eventfd to tell us they refilled. */
 		if (head == vq->num) {
-			if (unlikely(vhost_enable_notify(&net->dev, vq))) {
+			if (unlikely(busyloop_intr)) {
+				vhost_poll_queue(&vq->poll);
+			} else if (unlikely(vhost_enable_notify(&net->dev, vq))) {
 				vhost_disable_notify(&net->dev, vq);
 				continue;
 			}
@@ -663,7 +671,8 @@ static int vhost_net_rx_peek_head_len(struct vhost_net *net,
struct sock *sk)
 		preempt_disable();
 		endtime = busy_clock() + tvq->busyloop_timeout;
 
-		while (vhost_can_busy_poll(&net->dev, endtime) &&
+		while (vhost_can_busy_poll(endtime) &&
+		       !vhost_has_work(&net->dev) &&
 		       !sk_has_rx_data(sk) &&
 		       vhost_vq_avail_empty(&net->dev, tvq))
 			cpu_relax();
-- 
1.8.3.1

We may run handle_rx() while rx work is queued. For example a packet can
push the rx work during the window before handle_rx calls
vhost_net_disable_vq().
In that case busypoll immediately exits due to vhost_has_work()
condition and enables vq again. This can lead to another unnecessary rx
wake-ups, so poll rx work instead of enabling the vq.

Signed-off-by: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp>
---
 drivers/vhost/net.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 811c0e5..791bc8b 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -653,7 +653,8 @@ static void vhost_rx_signal_used(struct vhost_net_virtqueue
*nvq)
 	nvq->done_idx = 0;
 }
 
-static int vhost_net_rx_peek_head_len(struct vhost_net *net, struct sock *sk)
+static int vhost_net_rx_peek_head_len(struct vhost_net *net, struct sock *sk,
+				      bool *busyloop_intr)
 {
 	struct vhost_net_virtqueue *rnvq = &net->vqs[VHOST_NET_VQ_RX];
 	struct vhost_net_virtqueue *tnvq = &net->vqs[VHOST_NET_VQ_TX];
@@ -671,11 +672,16 @@ static int vhost_net_rx_peek_head_len(struct vhost_net
*net, struct sock *sk)
 		preempt_disable();
 		endtime = busy_clock() + tvq->busyloop_timeout;
 
-		while (vhost_can_busy_poll(endtime) &&
-		       !vhost_has_work(&net->dev) &&
-		       !sk_has_rx_data(sk) &&
-		       vhost_vq_avail_empty(&net->dev, tvq))
+		while (vhost_can_busy_poll(endtime)) {
+			if (vhost_has_work(&net->dev)) {
+				*busyloop_intr = true;
+				break;
+			}
+			if (sk_has_rx_data(sk) ||
+			    !vhost_vq_avail_empty(&net->dev, tvq))
+				break;
 			cpu_relax();
+		}
 
 		preempt_enable();
 
@@ -795,6 +801,7 @@ static void handle_rx(struct vhost_net *net)
 	s16 headcount;
 	size_t vhost_hlen, sock_hlen;
 	size_t vhost_len, sock_len;
+	bool busyloop_intr = false;
 	struct socket *sock;
 	struct iov_iter fixup;
 	__virtio16 num_buffers;
@@ -818,7 +825,9 @@ static void handle_rx(struct vhost_net *net)
 		vq->log : NULL;
 	mergeable = vhost_has_feature(vq, VIRTIO_NET_F_MRG_RXBUF);
 
-	while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk))) {
+	while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
+						      &busyloop_intr))) {
+		busyloop_intr = false;
 		sock_len += sock_hlen;
 		vhost_len = sock_len + vhost_hlen;
 		headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
@@ -905,7 +914,10 @@ static void handle_rx(struct vhost_net *net)
 			goto out;
 		}
 	}
-	vhost_net_enable_vq(net, vq);
+	if (unlikely(busyloop_intr))
+		vhost_poll_queue(&vq->poll);
+	else
+		vhost_net_enable_vq(net, vq);
 out:
 	vhost_rx_signal_used(nvq);
 	mutex_unlock(&vq->mutex);
-- 
1.8.3.1

We may run out of avail rx ring descriptor under heavy load but busypoll
did not detect it so busypoll may have exited prematurely. Avoid this by
checking rx ring full during busypoll.

Signed-off-by: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp>
---
 drivers/vhost/net.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 791bc8b..b224036 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -658,6 +658,7 @@ static int vhost_net_rx_peek_head_len(struct vhost_net *net,
struct sock *sk,
 {
 	struct vhost_net_virtqueue *rnvq = &net->vqs[VHOST_NET_VQ_RX];
 	struct vhost_net_virtqueue *tnvq = &net->vqs[VHOST_NET_VQ_TX];
+	struct vhost_virtqueue *rvq = &rnvq->vq;
 	struct vhost_virtqueue *tvq = &tnvq->vq;
 	unsigned long uninitialized_var(endtime);
 	int len = peek_head_len(rnvq, sk);
@@ -677,7 +678,8 @@ static int vhost_net_rx_peek_head_len(struct vhost_net *net,
struct sock *sk,
 				*busyloop_intr = true;
 				break;
 			}
-			if (sk_has_rx_data(sk) ||
+			if ((sk_has_rx_data(sk) &&
+			     !vhost_vq_avail_empty(&net->dev, rvq)) ||
 			    !vhost_vq_avail_empty(&net->dev, tvq))
 				break;
 			cpu_relax();
@@ -827,7 +829,6 @@ static void handle_rx(struct vhost_net *net)
 
 	while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
 						      &busyloop_intr))) {
-		busyloop_intr = false;
 		sock_len += sock_hlen;
 		vhost_len = sock_len + vhost_hlen;
 		headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
@@ -838,7 +839,9 @@ static void handle_rx(struct vhost_net *net)
 			goto out;
 		/* OK, now we need to know about added descriptors. */
 		if (!headcount) {
-			if (unlikely(vhost_enable_notify(&net->dev, vq))) {
+			if (unlikely(busyloop_intr)) {
+				vhost_poll_queue(&vq->poll);
+			} else if (unlikely(vhost_enable_notify(&net->dev, vq))) {
 				/* They have slipped one in as we were
 				 * doing that: check again. */
 				vhost_disable_notify(&net->dev, vq);
@@ -848,6 +851,7 @@ static void handle_rx(struct vhost_net *net)
 			 * they refilled. */
 			goto out;
 		}
+		busyloop_intr = false;
 		if (nvq->rx_ring)
 			msg.msg_control = vhost_net_buf_consume(&nvq->rxq);
 		/* On overrun, truncate and discard */
-- 
1.8.3.1

On 2018?07?03? 15:31, Toshiaki Makita wrote:
> So we can easily see which variable is for which, tx or rx.
>
> Signed-off-by: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp>
> ---
>   drivers/vhost/net.c | 34 +++++++++++++++++-----------------
>   1 file changed, 17 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 29756d8..3939c50 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -647,39 +647,39 @@ static void vhost_rx_signal_used(struct
vhost_net_virtqueue *nvq)
>   
>   static int vhost_net_rx_peek_head_len(struct vhost_net *net, struct sock
*sk)
>   {
> -	struct vhost_net_virtqueue *rvq = &net->vqs[VHOST_NET_VQ_RX];
> -	struct vhost_net_virtqueue *nvq = &net->vqs[VHOST_NET_VQ_TX];
> -	struct vhost_virtqueue *vq = &nvq->vq;
> +	struct vhost_net_virtqueue *rnvq = &net->vqs[VHOST_NET_VQ_RX];
> +	struct vhost_net_virtqueue *tnvq = &net->vqs[VHOST_NET_VQ_TX];
> +	struct vhost_virtqueue *tvq = &tnvq->vq;
>   	unsigned long uninitialized_var(endtime);
> -	int len = peek_head_len(rvq, sk);
> +	int len = peek_head_len(rnvq, sk);
>   
> -	if (!len && vq->busyloop_timeout) {
> +	if (!len && tvq->busyloop_timeout) {
>   		/* Flush batched heads first */
> -		vhost_rx_signal_used(rvq);
> +		vhost_rx_signal_used(rnvq);
>   		/* Both tx vq and rx socket were polled here */
> -		mutex_lock_nested(&vq->mutex, 1);
> -		vhost_disable_notify(&net->dev, vq);
> +		mutex_lock_nested(&tvq->mutex, 1);
> +		vhost_disable_notify(&net->dev, tvq);
>   
>   		preempt_disable();
> -		endtime = busy_clock() + vq->busyloop_timeout;
> +		endtime = busy_clock() + tvq->busyloop_timeout;
>   
>   		while (vhost_can_busy_poll(&net->dev, endtime) &&
>   		       !sk_has_rx_data(sk) &&
> -		       vhost_vq_avail_empty(&net->dev, vq))
> +		       vhost_vq_avail_empty(&net->dev, tvq))
>   			cpu_relax();
>   
>   		preempt_enable();
>   
> -		if (!vhost_vq_avail_empty(&net->dev, vq))
> -			vhost_poll_queue(&vq->poll);
> -		else if (unlikely(vhost_enable_notify(&net->dev, vq))) {
> -			vhost_disable_notify(&net->dev, vq);
> -			vhost_poll_queue(&vq->poll);
> +		if (!vhost_vq_avail_empty(&net->dev, tvq)) {
> +			vhost_poll_queue(&tvq->poll);
> +		} else if (unlikely(vhost_enable_notify(&net->dev, tvq))) {
> +			vhost_disable_notify(&net->dev, tvq);
> +			vhost_poll_queue(&tvq->poll);
>   		}
>   
> -		mutex_unlock(&vq->mutex);
> +		mutex_unlock(&tvq->mutex);
>   
> -		len = peek_head_len(rvq, sk);
> +		len = peek_head_len(rnvq, sk);
>   	}
>   
>   	return len;
Acked-by: Jason Wang <jasowang at redhat.com>

On 2018?07?03? 15:31, Toshiaki Makita wrote:
> Under heavy load vhost busypoll may run without suppressing
> notification. For example tx zerocopy callback can push tx work while
> handle_tx() is running, then busyloop exits due to vhost_has_work()
> condition and enables notification but immediately reenters handle_tx()
> because the pushed work was tx. In this case handle_tx() tries to
> disable notification again, but when using event_idx it by design
> cannot. Then busyloop will run without suppressing notification.
> Another example is the case where handle_tx() tries to enable
> notification but avail idx is advanced so disables it again. This case
> also leads to the same situation with event_idx.
>
> The problem is that once we enter this situation busyloop does not work
> under heavy load for considerable amount of time, because notification
> is likely to happen during busyloop and handle_tx() immediately enables
> notification after notification happens. Specifically busyloop detects
> notification by vhost_has_work() and then handle_tx() calls
> vhost_enable_notify(). Because the detected work was the tx work, it
> enters handle_tx(), and enters busyloop without suppression again.
> This is likely to be repeated, so with event_idx we are almost not able
> to suppress notification in this case.
>
> To fix this, poll the work instead of enabling notification when
> busypoll is interrupted by something. IMHO vhost_has_work() is kind of
> interruption rather than a signal to completely cancel the busypoll, so
> let's run busypoll after the necessary work is done.
>
> Signed-off-by: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp>
> ---
>   drivers/vhost/net.c | 35 ++++++++++++++++++++++-------------
>   1 file changed, 22 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 3939c50..811c0e5 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -396,13 +396,10 @@ static inline unsigned long busy_clock(void)
>   	return local_clock() >> 10;
>   }
>   
> -static bool vhost_can_busy_poll(struct vhost_dev *dev,
> -				unsigned long endtime)
> +static bool vhost_can_busy_poll(unsigned long endtime)
>   {
> -	return likely(!need_resched()) &&
> -	       likely(!time_after(busy_clock(), endtime)) &&
> -	       likely(!signal_pending(current)) &&
> -	       !vhost_has_work(dev);
> +	return likely(!need_resched() && !time_after(busy_clock(),
endtime) &&
> +		      !signal_pending(current));
>   }
>   
>   static void vhost_net_disable_vq(struct vhost_net *n,
> @@ -434,7 +431,8 @@ static int vhost_net_enable_vq(struct vhost_net *n,
>   static int vhost_net_tx_get_vq_desc(struct vhost_net *net,
>   				    struct vhost_virtqueue *vq,
>   				    struct iovec iov[], unsigned int iov_size,
> -				    unsigned int *out_num, unsigned int *in_num)
> +				    unsigned int *out_num, unsigned int *in_num,
> +				    bool *busyloop_intr)
>   {
>   	unsigned long uninitialized_var(endtime);
>   	int r = vhost_get_vq_desc(vq, vq->iov, ARRAY_SIZE(vq->iov),
> @@ -443,9 +441,15 @@ static int vhost_net_tx_get_vq_desc(struct vhost_net
*net,
>   	if (r == vq->num && vq->busyloop_timeout) {
>   		preempt_disable();
>   		endtime = busy_clock() + vq->busyloop_timeout;
> -		while (vhost_can_busy_poll(vq->dev, endtime) &&
> -		       vhost_vq_avail_empty(vq->dev, vq))
> +		while (vhost_can_busy_poll(endtime)) {
> +			if (vhost_has_work(vq->dev)) {
> +				*busyloop_intr = true;
> +				break;
> +			}
> +			if (!vhost_vq_avail_empty(vq->dev, vq))
> +				break;
>   			cpu_relax();
> +		}
>   		preempt_enable();
>   		r = vhost_get_vq_desc(vq, vq->iov, ARRAY_SIZE(vq->iov),
>   				      out_num, in_num, NULL, NULL);
> @@ -501,20 +505,24 @@ static void handle_tx(struct vhost_net *net)
>   	zcopy = nvq->ubufs;
>   
>   	for (;;) {
> +		bool busyloop_intr;
> +
>   		/* Release DMAs done buffers first */
>   		if (zcopy)
>   			vhost_zerocopy_signal_used(net, vq);
>   
> -
> +		busyloop_intr = false;
>   		head = vhost_net_tx_get_vq_desc(net, vq, vq->iov,
>   						ARRAY_SIZE(vq->iov),
> -						&out, &in);
> +						&out, &in, &busyloop_intr);
>   		/* On error, stop handling until the next kick. */
>   		if (unlikely(head < 0))
>   			break;
>   		/* Nothing new?  Wait for eventfd to tell us they refilled. */
>   		if (head == vq->num) {
> -			if (unlikely(vhost_enable_notify(&net->dev, vq))) {
> +			if (unlikely(busyloop_intr)) {
> +				vhost_poll_queue(&vq->poll);
> +			} else if (unlikely(vhost_enable_notify(&net->dev, vq))) {
>   				vhost_disable_notify(&net->dev, vq);
>   				continue;
>   			}
> @@ -663,7 +671,8 @@ static int vhost_net_rx_peek_head_len(struct vhost_net
*net, struct sock *sk)
>   		preempt_disable();
>   		endtime = busy_clock() + tvq->busyloop_timeout;
>   
> -		while (vhost_can_busy_poll(&net->dev, endtime) &&
> +		while (vhost_can_busy_poll(endtime) &&
> +		       !vhost_has_work(&net->dev) &&
>   		       !sk_has_rx_data(sk) &&
>   		       vhost_vq_avail_empty(&net->dev, tvq))
>   			cpu_relax();
Acked-by: Jason Wang <jasowang at redhat.com>

On 2018?07?03? 15:31, Toshiaki Makita wrote:
> We may run out of avail rx ring descriptor under heavy load but busypoll
> did not detect it so busypoll may have exited prematurely. Avoid this by
> checking rx ring full during busypoll.
Actually, we're checking whether it was empty in fact?
>
> Signed-off-by: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp>
> ---
>   drivers/vhost/net.c | 10 +++++++---
>   1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 791bc8b..b224036 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -658,6 +658,7 @@ static int vhost_net_rx_peek_head_len(struct vhost_net
*net, struct sock *sk,
>   {
>   	struct vhost_net_virtqueue *rnvq = &net->vqs[VHOST_NET_VQ_RX];
>   	struct vhost_net_virtqueue *tnvq = &net->vqs[VHOST_NET_VQ_TX];
> +	struct vhost_virtqueue *rvq = &rnvq->vq;
>   	struct vhost_virtqueue *tvq = &tnvq->vq;
>   	unsigned long uninitialized_var(endtime);
>   	int len = peek_head_len(rnvq, sk);
> @@ -677,7 +678,8 @@ static int vhost_net_rx_peek_head_len(struct vhost_net
*net, struct sock *sk,
>   				*busyloop_intr = true;
>   				break;
>   			}
> -			if (sk_has_rx_data(sk) ||
> +			if ((sk_has_rx_data(sk) &&
> +			     !vhost_vq_avail_empty(&net->dev, rvq)) ||
>   			    !vhost_vq_avail_empty(&net->dev, tvq))
>   				break;
>   			cpu_relax();
> @@ -827,7 +829,6 @@ static void handle_rx(struct vhost_net *net)
>   
I thought below codes should belong to patch 3. Or I may miss something.

Thanks
>   	while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
>   						      &busyloop_intr))) {
> -		busyloop_intr = false;
>   		sock_len += sock_hlen;
>   		vhost_len = sock_len + vhost_hlen;
>   		headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
> @@ -838,7 +839,9 @@ static void handle_rx(struct vhost_net *net)
>   			goto out;
>   		/* OK, now we need to know about added descriptors. */
>   		if (!headcount) {
> -			if (unlikely(vhost_enable_notify(&net->dev, vq))) {
> +			if (unlikely(busyloop_intr)) {
> +				vhost_poll_queue(&vq->poll);
> +			} else if (unlikely(vhost_enable_notify(&net->dev, vq))) {
>   				/* They have slipped one in as we were
>   				 * doing that: check again. */
>   				vhost_disable_notify(&net->dev, vq);
> @@ -848,6 +851,7 @@ static void handle_rx(struct vhost_net *net)
>   			 * they refilled. */
>   			goto out;
>   		}
> +		busyloop_intr = false;
>   		if (nvq->rx_ring)
>   			msg.msg_control = vhost_net_buf_consume(&nvq->rxq);
>   		/* On overrun, truncate and discard */

On 2018?07?03? 15:31, Toshiaki Makita wrote:
> We may run handle_rx() while rx work is queued. For example a packet can
> push the rx work during the window before handle_rx calls
> vhost_net_disable_vq().
> In that case busypoll immediately exits due to vhost_has_work()
> condition and enables vq again. This can lead to another unnecessary rx
> wake-ups, so poll rx work instead of enabling the vq.
>
> Signed-off-by: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp>
> ---
>   drivers/vhost/net.c | 26 +++++++++++++++++++-------
>   1 file changed, 19 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 811c0e5..791bc8b 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -653,7 +653,8 @@ static void vhost_rx_signal_used(struct
vhost_net_virtqueue *nvq)
>   	nvq->done_idx = 0;
>   }
>   
> -static int vhost_net_rx_peek_head_len(struct vhost_net *net, struct sock
*sk)
> +static int vhost_net_rx_peek_head_len(struct vhost_net *net, struct sock
*sk,
> +				      bool *busyloop_intr)
>   {
>   	struct vhost_net_virtqueue *rnvq = &net->vqs[VHOST_NET_VQ_RX];
>   	struct vhost_net_virtqueue *tnvq = &net->vqs[VHOST_NET_VQ_TX];
> @@ -671,11 +672,16 @@ static int vhost_net_rx_peek_head_len(struct
vhost_net *net, struct sock *sk)
>   		preempt_disable();
>   		endtime = busy_clock() + tvq->busyloop_timeout;
>   
> -		while (vhost_can_busy_poll(endtime) &&
> -		       !vhost_has_work(&net->dev) &&
> -		       !sk_has_rx_data(sk) &&
> -		       vhost_vq_avail_empty(&net->dev, tvq))
> +		while (vhost_can_busy_poll(endtime)) {
> +			if (vhost_has_work(&net->dev)) {
> +				*busyloop_intr = true;
> +				break;
> +			}
> +			if (sk_has_rx_data(sk) ||
> +			    !vhost_vq_avail_empty(&net->dev, tvq))
> +				break;
>   			cpu_relax();
> +		}
>   
>   		preempt_enable();
>   
> @@ -795,6 +801,7 @@ static void handle_rx(struct vhost_net *net)
>   	s16 headcount;
>   	size_t vhost_hlen, sock_hlen;
>   	size_t vhost_len, sock_len;
> +	bool busyloop_intr = false;
>   	struct socket *sock;
>   	struct iov_iter fixup;
>   	__virtio16 num_buffers;
> @@ -818,7 +825,9 @@ static void handle_rx(struct vhost_net *net)
>   		vq->log : NULL;
>   	mergeable = vhost_has_feature(vq, VIRTIO_NET_F_MRG_RXBUF);
>   
> -	while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk))) {
> +	while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
> +						      &busyloop_intr))) {
> +		busyloop_intr = false;
>   		sock_len += sock_hlen;
>   		vhost_len = sock_len + vhost_hlen;
>   		headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
> @@ -905,7 +914,10 @@ static void handle_rx(struct vhost_net *net)
>   			goto out;
>   		}
>   	}
> -	vhost_net_enable_vq(net, vq);
> +	if (unlikely(busyloop_intr))
> +		vhost_poll_queue(&vq->poll);
> +	else
> +		vhost_net_enable_vq(net, vq);
>   out:
>   	vhost_rx_signal_used(nvq);
>   	mutex_unlock(&vq->mutex);
Acked-by: Jason Wang <jasowang at redhat.com>

On 2018?07?03? 15:31, Toshiaki Makita wrote:
> We may run out of avail rx ring descriptor under heavy load but busypoll
> did not detect it so busypoll may have exited prematurely. Avoid this by
> checking rx ring full during busypoll.
>
> Signed-off-by: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp>
> ---
>   drivers/vhost/net.c | 10 +++++++---
>   1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 791bc8b..b224036 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -658,6 +658,7 @@ static int vhost_net_rx_peek_head_len(struct vhost_net
*net, struct sock *sk,
>   {
>   	struct vhost_net_virtqueue *rnvq = &net->vqs[VHOST_NET_VQ_RX];
>   	struct vhost_net_virtqueue *tnvq = &net->vqs[VHOST_NET_VQ_TX];
> +	struct vhost_virtqueue *rvq = &rnvq->vq;
>   	struct vhost_virtqueue *tvq = &tnvq->vq;
>   	unsigned long uninitialized_var(endtime);
>   	int len = peek_head_len(rnvq, sk);
> @@ -677,7 +678,8 @@ static int vhost_net_rx_peek_head_len(struct vhost_net
*net, struct sock *sk,
>   				*busyloop_intr = true;
>   				break;
>   			}
> -			if (sk_has_rx_data(sk) ||
> +			if ((sk_has_rx_data(sk) &&
> +			     !vhost_vq_avail_empty(&net->dev, rvq)) ||
>   			    !vhost_vq_avail_empty(&net->dev, tvq))
>   				break;
>   			cpu_relax();
> @@ -827,7 +829,6 @@ static void handle_rx(struct vhost_net *net)
>   
>   	while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
>   						      &busyloop_intr))) {
> -		busyloop_intr = false;
>   		sock_len += sock_hlen;
>   		vhost_len = sock_len + vhost_hlen;
>   		headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
> @@ -838,7 +839,9 @@ static void handle_rx(struct vhost_net *net)
>   			goto out;
>   		/* OK, now we need to know about added descriptors. */
>   		if (!headcount) {
> -			if (unlikely(vhost_enable_notify(&net->dev, vq))) {
> +			if (unlikely(busyloop_intr)) {
> +				vhost_poll_queue(&vq->poll);
> +			} else if (unlikely(vhost_enable_notify(&net->dev, vq))) {
>   				/* They have slipped one in as we were
>   				 * doing that: check again. */
>   				vhost_disable_notify(&net->dev, vq);
> @@ -848,6 +851,7 @@ static void handle_rx(struct vhost_net *net)
>   			 * they refilled. */
>   			goto out;
>   		}
> +		busyloop_intr = false;
>   		if (nvq->rx_ring)
>   			msg.msg_control = vhost_net_buf_consume(&nvq->rxq);
>   		/* On overrun, truncate and discard */
Acked-by: Jason Wang <jasowang at redhat.com>

On Tue, Jul 03, 2018 at 04:31:30PM +0900, Toshiaki Makita
wrote:
> Under heavy load vhost tx busypoll tend not to suppress vq kicks, which
> causes poor guest tx performance. The detailed scenario is described in
> commitlog of patch 2.
> Rx seems not to have that serious problem, but for consistency I made a
> similar change on rx to avoid rx wakeups (patch 3).
> Additionary patch 4 is to avoid rx kicks under heavy load during
> busypoll.
> 
> Tx performance is greatly improved by this change. I don't see notable
> performance change on rx with this series though.
> 
> Performance numbers (tx):
> 
> - Bulk transfer from guest to external physical server.
>     [Guest]->vhost_net->tap--(XDP_REDIRECT)-->i40e --(wire)-->
[Server]
> - Set 10us busypoll.
> - Guest disables checksum and TSO because of host XDP.
> - Measured single flow Mbps by netperf, and kicks by perf kvm stat
>   (EPT_MISCONFIG event).
> 
>                             Before              After
>                           Mbps  kicks/s      Mbps  kicks/s
> UDP_STREAM 1472byte              247758                 27
>                 Send   3645.37            6958.10
>                 Recv   3588.56            6958.10
>               1byte                9865                 37
>                 Send      4.34               5.43
>                 Recv      4.17               5.26
> TCP_STREAM             8801.03    45794   9592.77     2884
Thanks!
Series:

Acked-by: Michael S. Tsirkin <mst at redhat.com>

> v2:
> - Split patches into 3 parts (renaming variables, tx-kick fix, rx-wakeup
>   fix).
> - Avoid rx-kicks too (patch 4).
> - Don't memorize endtime as it is not needed for now.
> 
> Toshiaki Makita (4):
>   vhost_net: Rename local variables in vhost_net_rx_peek_head_len
>   vhost_net: Avoid tx vring kicks during busyloop
>   vhost_net: Avoid rx queue wake-ups during busypoll
>   vhost_net: Avoid rx vring kicks during busyloop
> 
>  drivers/vhost/net.c | 95
+++++++++++++++++++++++++++++++++--------------------
>  1 file changed, 60 insertions(+), 35 deletions(-)
> 
> -- 
> 1.8.3.1
>

From: Toshiaki Makita <makita.toshiaki at lab.ntt.co.jp>
Date: Tue,  3 Jul 2018 16:31:30 +0900
> Under heavy load vhost tx busypoll tend not to suppress vq kicks, which
> causes poor guest tx performance. The detailed scenario is described in
> commitlog of patch 2.
> Rx seems not to have that serious problem, but for consistency I made a
> similar change on rx to avoid rx wakeups (patch 3).
> Additionary patch 4 is to avoid rx kicks under heavy load during
> busypoll.
> 
> Tx performance is greatly improved by this change. I don't see notable
> performance change on rx with this series though.
 ...

Series applied, thank you.