thr3ads.net - Linux Virtualization - [PATCH] linux/types.h: enable endian checks for all sparse builds [Dec 2016]

If this information is useful, please help other people find it:
Share via:

Bart Van Assche

2016-Dec-08 06:38 UTC

[PATCH] linux/types.h: enable endian checks for all sparse builds

On 12/07/16 21:54, Michael S. Tsirkin wrote:> On Thu, Dec 08, 2016 at 05:21:47AM +0000, Bart Van Assche wrote:
>> Additionally, there are notable exceptions to the rule that most
drivers
>> are endian-clean, e.g. drivers/scsi/qla2xxx. I would appreciate it if
it
>> would remain possible to check such drivers with sparse without
enabling
>> endianness checks. Have you considered to change #ifdef
__CHECK_ENDIAN__
>> into e.g. #ifndef __DONT_CHECK_ENDIAN__?
>
> The right thing is probably just to fix these, isn't it?
> Until then, why not just ignore the warnings?
Neither option is realistic. With endian-checking enabled the qla2xxx 
driver triggers so many warnings that it becomes a real challenge to 
filter the non-endian warnings out manually:

$ for f in "" CF=-D__CHECK_ENDIAN__; do make M=drivers/scsi/qla2xxx
C=2\
     $f | &grep -c ': warning:'; done
4
752

If you think it would be easy to fix the endian warnings triggered by 
the qla2xxx driver, you are welcome to try to fix these.

Bart.

Greg Kroah-Hartman

2016-Dec-08 11:13 UTC

head link

[PATCH] linux/types.h: enable endian checks for all sparse builds

On Thu, Dec 08, 2016 at 06:38:11AM +0000, Bart Van Assche
wrote:> On 12/07/16 21:54, Michael S. Tsirkin wrote:
> > On Thu, Dec 08, 2016 at 05:21:47AM +0000, Bart Van Assche wrote:
> >> Additionally, there are notable exceptions to the rule that most
drivers
> >> are endian-clean, e.g. drivers/scsi/qla2xxx. I would appreciate it
if it
> >> would remain possible to check such drivers with sparse without
enabling
> >> endianness checks. Have you considered to change #ifdef
__CHECK_ENDIAN__
> >> into e.g. #ifndef __DONT_CHECK_ENDIAN__?
> >
> > The right thing is probably just to fix these, isn't it?
> > Until then, why not just ignore the warnings?
> 
> Neither option is realistic. With endian-checking enabled the qla2xxx 
> driver triggers so many warnings that it becomes a real challenge to 
> filter the non-endian warnings out manually:
> 
> $ for f in "" CF=-D__CHECK_ENDIAN__; do make
M=drivers/scsi/qla2xxx C=2\
>      $f | &grep -c ': warning:'; done
> 4
> 752
> 
> If you think it would be easy to fix the endian warnings triggered by 
> the qla2xxx driver, you are welcome to try to fix these.
Please don't let one crappy, obviously broken, driver prevent this good
change from happening which will help ensure that the rest of the kernel
(i.e. 99% of it) can be easily tested and fixed for endian issues.

Sounds like you should just fix the driver up if it has so many
problems, and it annoys you so much that you have to filter out some
warnings to see the others :)

thanks,

greg k-h

Michael S. Tsirkin

2016-Dec-08 16:17 UTC

head link

[PATCH] linux/types.h: enable endian checks for all sparse builds

On Thu, Dec 08, 2016 at 06:38:11AM +0000, Bart Van Assche
wrote:> On 12/07/16 21:54, Michael S. Tsirkin wrote:
> > On Thu, Dec 08, 2016 at 05:21:47AM +0000, Bart Van Assche wrote:
> >> Additionally, there are notable exceptions to the rule that most
drivers
> >> are endian-clean, e.g. drivers/scsi/qla2xxx. I would appreciate it
if it
> >> would remain possible to check such drivers with sparse without
enabling
> >> endianness checks. Have you considered to change #ifdef
__CHECK_ENDIAN__
> >> into e.g. #ifndef __DONT_CHECK_ENDIAN__?
> >
> > The right thing is probably just to fix these, isn't it?
> > Until then, why not just ignore the warnings?
> 
> Neither option is realistic. With endian-checking enabled the qla2xxx 
> driver triggers so many warnings that it becomes a real challenge to 
> filter the non-endian warnings out manually:
> 
> $ for f in "" CF=-D__CHECK_ENDIAN__; do make
M=drivers/scsi/qla2xxx C=2\
>      $f | &grep -c ': warning:'; done
> 4
> 752
You can always revert this patch in your tree, or whatever.  It does not
look like this will get fixed otherwise.
> If you think it would be easy to fix the endian warnings triggered by 
> the qla2xxx driver, you are welcome to try to fix these.
> 
> Bart.
Yea, this hardware was designed by someone who thought mixing
LE and BE all over the place is a good idea.
But who said it should be easy?

Maybe this change will be enough to motivate the maintainers.

Here's a minor buglet for you as a motivator:

                        if (ct_rsp->header.response !                        
cpu_to_be16(CT_ACCEPT_RESPONSE)) {
                                ql_dbg(ql_dbg_disc + ql_dbg_buffer, vha, 0x2077,
                                    "%s failed rejected request on port_id:
%02x%02x%02x Compeltion status 0x%x, response 0x%x\n",
                                    routine, vha->d_id.b.domain,
                                    vha->d_id.b.area, vha->d_id.b.al_pa,
comp_status, ct_rsp->header.response);


response is BE and isn't printed correctly.

another:

        eiter->a.max_frame_size = cpu_to_be32(eiter->a.max_frame_size);
        size += 4 + 4;

        ql_dbg(ql_dbg_disc, vha, 0x20bc,
            "Max_Frame_Size = %x.\n", eiter->a.max_frame_size);

printed too late, it's be by that time.

Here's another suspicious line

        ctio24->u.status1.flags = (atio->u.isp24.attr << 9) |
            cpu_to_le16(CTIO7_FLAGS_STATUS_MODE_1 |
                CTIO7_FLAGS_TERMINATE);

shifting attr by 9 bits gives different results on BE and LE,
mixing it with le16 looks rather strange.

Another:

                ha->flags.dport_enabled                    
(mid_init_cb->init_cb.firmware_options_1 & BIT_7) != 0;

BIT_7 is native endian, firmware_options_1 is LE I think.



Look at qla27xx_find_valid_image as well.

        if (pri_image_status.signature != QLA27XX_IMG_STATUS_SIGN)

qla27xx_image_status seems to be data coming from flash, but is
somehow native-endian? Maybe ...


        lun = a->u.isp24.fcp_cmnd.lun;

I think lun here is in hardware format (le?), code treats it
as native.


Not to speak about interface abuse all over the place.
How about this:

uint32_t *
qla24xx_read_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t
faddr,
    uint32_t dwords)                     
{
        uint32_t i;                     
        struct qla_hw_data *ha = vha->hw;
                                        
        /* Dword reads to flash. */
        for (i = 0; i < dwords; i++, faddr++)
                dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
                    flash_data_addr(ha, faddr)));

        return dwptr;                   
}

OK so we convert to LE ...

                qla24xx_read_flash_data(vha, dcode, faddr, 4); 
    
                risc_addr = be32_to_cpu(dcode[2]);
                *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
                risc_size = be32_to_cpu(dcode[3]);

then happily assume it's BE.

And again, coming from flash, it's unlikely to actually be in the native
endian-ness as callers seem to assume. I'm guessing it's all BE.

I poked at it a bit and was able to cut down # of warnings
from 1700 to 1400 in an hour. Someone familiar with the code
should look at it.

-- 
MST

Madhani, Himanshu

2016-Dec-09 06:40 UTC

head link

[PATCH] linux/types.h: enable endian checks for all sparse builds

Hi Mike/Bart, 







On 12/8/16, 8:17 AM, "virtualization-bounces at lists.linux-foundation.org
on behalf of Michael S. Tsirkin" <virtualization-bounces at
lists.linux-foundation.org on behalf of mst at redhat.com> wrote:
>On Thu, Dec 08, 2016 at 06:38:11AM +0000, Bart Van Assche wrote:
>> On 12/07/16 21:54, Michael S. Tsirkin wrote:
>> > On Thu, Dec 08, 2016 at 05:21:47AM +0000, Bart Van Assche wrote:
>> >> Additionally, there are notable exceptions to the rule that
most drivers
>> >> are endian-clean, e.g. drivers/scsi/qla2xxx. I would
appreciate it if it
>> >> would remain possible to check such drivers with sparse
without enabling
>> >> endianness checks. Have you considered to change #ifdef
__CHECK_ENDIAN__
>> >> into e.g. #ifndef __DONT_CHECK_ENDIAN__?
>> >
>> > The right thing is probably just to fix these, isn't it?
>> > Until then, why not just ignore the warnings?
>> 
>> Neither option is realistic. With endian-checking enabled the qla2xxx 
>> driver triggers so many warnings that it becomes a real challenge to 
>> filter the non-endian warnings out manually:
>> 
>> $ for f in "" CF=-D__CHECK_ENDIAN__; do make
M=drivers/scsi/qla2xxx C=2\
>>      $f | &grep -c ': warning:'; done
>> 4
>> 752
>
>You can always revert this patch in your tree, or whatever.  It does not
>look like this will get fixed otherwise.
>
>> If you think it would be easy to fix the endian warnings triggered by 
>> the qla2xxx driver, you are welcome to try to fix these.
>> 
>> Bart.
>
>Yea, this hardware was designed by someone who thought mixing
>LE and BE all over the place is a good idea.
>But who said it should be easy?
>
>Maybe this change will be enough to motivate the maintainers.
>
>Here's a minor buglet for you as a motivator:
>
>                        if (ct_rsp->header.response !>                
cpu_to_be16(CT_ACCEPT_RESPONSE)) {
>                                ql_dbg(ql_dbg_disc + ql_dbg_buffer, vha,
0x2077,
>                                    "%s failed rejected request on
port_id: %02x%02x%02x Compeltion status 0x%x, response 0x%x\n",
>                                    routine, vha->d_id.b.domain,
>                                    vha->d_id.b.area,
vha->d_id.b.al_pa, comp_status, ct_rsp->header.response);
>
>
>response is BE and isn't printed correctly.
>
>another:
>
>        eiter->a.max_frame_size =
cpu_to_be32(eiter->a.max_frame_size);
>        size += 4 + 4;
>
>        ql_dbg(ql_dbg_disc, vha, 0x20bc,
>            "Max_Frame_Size = %x.\n", eiter->a.max_frame_size);
>
>printed too late, it's be by that time.
>
>Here's another suspicious line
>
>        ctio24->u.status1.flags = (atio->u.isp24.attr << 9) |
>            cpu_to_le16(CTIO7_FLAGS_STATUS_MODE_1 |
>                CTIO7_FLAGS_TERMINATE);
>
>shifting attr by 9 bits gives different results on BE and LE,
>mixing it with le16 looks rather strange.
>
>Another:
>
>                ha->flags.dport_enabled >                   
(mid_init_cb->init_cb.firmware_options_1 & BIT_7) != 0;
>
>BIT_7 is native endian, firmware_options_1 is LE I think.
>
>
>
>Look at qla27xx_find_valid_image as well.
>
>        if (pri_image_status.signature != QLA27XX_IMG_STATUS_SIGN)
>
>qla27xx_image_status seems to be data coming from flash, but is
>somehow native-endian? Maybe ...
>
>
>        lun = a->u.isp24.fcp_cmnd.lun;
>
>I think lun here is in hardware format (le?), code treats it
>as native.
>
>
>Not to speak about interface abuse all over the place.
>How about this:
>
>uint32_t *
>qla24xx_read_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t
>faddr,
>    uint32_t dwords)                     
>{
>        uint32_t i;                     
>        struct qla_hw_data *ha = vha->hw;
>                                        
>        /* Dword reads to flash. */
>        for (i = 0; i < dwords; i++, faddr++)
>                dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
>                    flash_data_addr(ha, faddr)));
>
>        return dwptr;                   
>}
>
>OK so we convert to LE ...
>
>                qla24xx_read_flash_data(vha, dcode, faddr, 4); 
>    
>                risc_addr = be32_to_cpu(dcode[2]);
>                *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
>                risc_size = be32_to_cpu(dcode[3]);
>
>then happily assume it's BE.
>
>And again, coming from flash, it's unlikely to actually be in the native
>endian-ness as callers seem to assume. I'm guessing it's all BE.
>
>I poked at it a bit and was able to cut down # of warnings
>from 1700 to 1400 in an hour. Someone familiar with the code
>should look at it.
We?ll take a look and send patches to resolve these warnings. 
>
>-- 
>MST
>_______________________________________________
>Virtualization mailing list
>Virtualization at lists.linux-foundation.org
>https://lists.linuxfoundation.org/mailman/listinfo/virtualization

Maybe Matching Threads

Search for more maybe matching threads

Linux Virtualization - Dec 2016 - [PATCH] linux/types.h: enable endian checks for all sparse builds

[PATCH] linux/types.h: enable endian checks for all sparse builds

[PATCH] linux/types.h: enable endian checks for all sparse builds

[PATCH] linux/types.h: enable endian checks for all sparse builds

[PATCH] linux/types.h: enable endian checks for all sparse builds

Maybe Matching Threads