Thierry Reding
2019-Sep-16 15:17 UTC
[Nouveau] [PATCH 0/6] drm/nouveau: Preparatory work for GV11B support
From: Thierry Reding <treding at nvidia.com> Hi Ben, these are a couple of patches that are in preparation for adding GV11B support. The fundamental issue that these are trying to solve is that the GV11B is the first Tegra incarnation of the GPU where the aperture really matters. All prior generations would accept any of them. For dGPUs we usually allocate memory in VRAM, so the default aperture (0) is correct. However, on Tegra the buffers are allocated in system memory, and since the GPU actually cares about the aperture, we need to ensure that the aperture field is written in all the necessary places. This series of patches does three things: the first two patches make it easier to debug aperture related faults by actually reading the aperture information from the fault information registers. The second patch is actually only a small cleanup. Patches 3-5 unify the aperture values. All generations have the same definitions for these, so there's little use in separating them out into callbacks. Finally, patch 6 writes the aperture field in the places where required. I've used these patches to test my initial support for GV11B. This is enough to get me through the driver probe without any faults, but I have not made much progress on secboot support yet, so I can't use the GV11B to do anything very interesting yet. I should also note that this is completely untested on dGPU because I don't currently have a way of testing them. I'm working on that, but in the meantime it'd be great if somebody could give this set a quick spin on a dGPU to confirm that these don't break. Thierry Thierry Reding (6): drm/nouveau: fault: Store aperture in fault information drm/nouveau: fault: Widen engine field drm/nouveau: Remove bogus gk20a aperture callback drm/nouveau: Implement nvkm_memory_aperture() drm/nouveau: Remove unused nvkm_vmm_func->aper() implementations drm/nouveau: Program aperture field where necessary .../drm/nouveau/include/nvkm/core/memory.h | 28 +++++++++++++++++++ .../drm/nouveau/include/nvkm/subdev/fault.h | 1 + .../gpu/drm/nouveau/nvkm/engine/fifo/gk104.c | 3 +- .../nouveau/nvkm/engine/fifo/gpfifogk104.c | 7 +++-- .../nouveau/nvkm/engine/fifo/gpfifogv100.c | 5 ++-- .../gpu/drm/nouveau/nvkm/engine/fifo/gv100.c | 7 ++++- .../gpu/drm/nouveau/nvkm/subdev/bar/gf100.c | 3 +- .../gpu/drm/nouveau/nvkm/subdev/fault/gv100.c | 3 +- drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h | 3 -- .../drm/nouveau/nvkm/subdev/mmu/vmmgf100.c | 21 ++------------ .../drm/nouveau/nvkm/subdev/mmu/vmmgk104.c | 2 -- .../drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c | 12 -------- .../drm/nouveau/nvkm/subdev/mmu/vmmgm200.c | 2 -- .../drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c | 2 -- .../drm/nouveau/nvkm/subdev/mmu/vmmgp100.c | 8 ++---- .../drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c | 1 - .../drm/nouveau/nvkm/subdev/mmu/vmmgv100.c | 1 - .../drm/nouveau/nvkm/subdev/mmu/vmmtu102.c | 1 - 18 files changed, 55 insertions(+), 55 deletions(-) -- 2.23.0
Thierry Reding
2019-Sep-16 15:17 UTC
[Nouveau] [PATCH 1/6] drm/nouveau: fault: Store aperture in fault information
From: Thierry Reding <treding at nvidia.com>
The fault information register contains data about the aperture that
caused the failure. This can be useful in debugging aperture related
programming bugs.
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
drivers/gpu/drm/nouveau/include/nvkm/subdev/fault.h | 1 +
drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c | 3 ++-
drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/fault.h
b/drivers/gpu/drm/nouveau/include/nvkm/subdev/fault.h
index 97322f95b3ee..1cc862bc1122 100644
--- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/fault.h
+++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/fault.h
@@ -21,6 +21,7 @@ struct nvkm_fault_data {
u64 addr;
u64 inst;
u64 time;
+ u8 aperture;
u8 engine;
u8 valid;
u8 gpc;
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c
b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c
index 5d4b695cab8e..81cbe1cc4804 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c
@@ -519,9 +519,10 @@ gk104_fifo_fault(struct nvkm_fifo *base, struct
nvkm_fault_data *info)
chan = nvkm_fifo_chan_inst_locked(&fifo->base, info->inst);
nvkm_error(subdev,
- "fault %02x [%s] at %016llx engine %02x [%s] client %02x "
+ "fault %02x [%s] at %016llx aperture %02x engine %02x [%s] client
%02x "
"[%s%s] reason %02x [%s] on channel %d [%010llx %s]\n",
info->access, ea ? ea->name : "", info->addr,
+ info->aperture,
info->engine, ee ? ee->name : en,
info->client, ct, ec ? ec->name : "",
info->reason, er ? er->name : "", chan ? chan->chid :
-1,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c
index 6747f09c2dc3..b5e32295237b 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c
@@ -138,6 +138,7 @@ gv100_fault_intr_fault(struct nvkm_fault *fault)
info.inst = ((u64)insthi << 32) | (info0 & 0xfffff000);
info.time = 0;
info.engine = (info0 & 0x000000ff);
+ info.aperture = (info0 & 0x00000c00) >> 10;
info.valid = (info1 & 0x80000000) >> 31;
info.gpc = (info1 & 0x1f000000) >> 24;
info.hub = (info1 & 0x00100000) >> 20;
--
2.23.0
Thierry Reding
2019-Sep-16 15:17 UTC
[Nouveau] [PATCH 2/6] drm/nouveau: fault: Widen engine field
From: Thierry Reding <treding at nvidia.com> The engine field in the FIFO fault information registers is actually 9 bits wide. Signed-off-by: Thierry Reding <treding at nvidia.com> --- drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c index b5e32295237b..28306c5f6651 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c @@ -137,8 +137,8 @@ gv100_fault_intr_fault(struct nvkm_fault *fault) info.addr = ((u64)addrhi << 32) | addrlo; info.inst = ((u64)insthi << 32) | (info0 & 0xfffff000); info.time = 0; - info.engine = (info0 & 0x000000ff); info.aperture = (info0 & 0x00000c00) >> 10; + info.engine = (info0 & 0x000001ff); info.valid = (info1 & 0x80000000) >> 31; info.gpc = (info1 & 0x1f000000) >> 24; info.hub = (info1 & 0x00100000) >> 20; -- 2.23.0
Thierry Reding
2019-Sep-16 15:17 UTC
[Nouveau] [PATCH 3/6] drm/nouveau: Remove bogus gk20a aperture callback
From: Thierry Reding <treding at nvidia.com>
The gk20a (as well as all subsequent Tegra instantiations of the GPU) do
in fact use the same apertures as regular GPUs. Prior to gv11b there are
no checks in hardware for the aperture, so we get away with setting VRAM
as the aperture for buffers that are actually in system memory.
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h | 1 -
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c | 10 ----------
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c | 4 ++--
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c | 2 +-
4 files changed, 3 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h
index fb3a9e8bb9cd..9862f44ac8b5 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h
@@ -212,7 +212,6 @@ void gf100_vmm_flush(struct nvkm_vmm *, int);
void gf100_vmm_invalidate(struct nvkm_vmm *, u32 type);
void gf100_vmm_invalidate_pdb(struct nvkm_vmm *, u64 addr);
-int gk20a_vmm_aper(enum nvkm_memory_target);
int gk20a_vmm_valid(struct nvkm_vmm *, void *, u32, struct nvkm_vmm_map *);
int gm200_vmm_new_(const struct nvkm_vmm_func *, const struct nvkm_vmm_func *,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c
index 16d7bf727292..999b953505b3 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c
@@ -25,16 +25,6 @@
#include <core/memory.h>
-int
-gk20a_vmm_aper(enum nvkm_memory_target target)
-{
- switch (target) {
- case NVKM_MEM_TARGET_NCOH: return 0;
- default:
- return -EINVAL;
- }
-}
-
int
gk20a_vmm_valid(struct nvkm_vmm *vmm, void *argv, u32 argc,
struct nvkm_vmm_map *map)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c
index 7a6066d886cd..f5d7819c4a40 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c
@@ -25,7 +25,7 @@ static const struct nvkm_vmm_func
gm20b_vmm_17 = {
.join = gm200_vmm_join,
.part = gf100_vmm_part,
- .aper = gk20a_vmm_aper,
+ .aper = gf100_vmm_aper,
.valid = gk20a_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
@@ -41,7 +41,7 @@ static const struct nvkm_vmm_func
gm20b_vmm_16 = {
.join = gm200_vmm_join,
.part = gf100_vmm_part,
- .aper = gk20a_vmm_aper,
+ .aper = gf100_vmm_aper,
.valid = gk20a_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c
index 180c8f006e32..ffe84ea2f7d9 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c
@@ -43,7 +43,7 @@ static const struct nvkm_vmm_func
gp10b_vmm = {
.join = gp100_vmm_join,
.part = gf100_vmm_part,
- .aper = gk20a_vmm_aper,
+ .aper = gf100_vmm_aper,
.valid = gp10b_vmm_valid,
.flush = gp100_vmm_flush,
.mthd = gp100_vmm_mthd,
--
2.23.0
Thierry Reding
2019-Sep-16 15:17 UTC
[Nouveau] [PATCH 4/6] drm/nouveau: Implement nvkm_memory_aperture()
From: Thierry Reding <treding at nvidia.com>
The aperture of a buffer is always specific to where its memory was
allocated from. Furthermore, the encoding of the aperture is always
the same, regardless of GPU generation.
Implement the memory target to aperture conversion in one central
place and make the aperture independent of the VMM.
Note that we no longer return a negative error code for unsupported
apertures. First, this should never happen to begin with and is a
programming error, which is why we have a WARN already. Second, the
standard aperture (0, VRAM) should be correct for the vast majority
of memory objects. Lastly, the aperture also needs to be programmed
into many registers and instance blocks. Having to check for error
codes at every step of the way would make this very unwieldy. If in
any case there is ever a problem with the aperture being wrong, let
us rely on the WARN to tell us about it.
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
.../drm/nouveau/include/nvkm/core/memory.h | 28 +++++++++++++++++++
.../drm/nouveau/nvkm/subdev/mmu/vmmgf100.c | 7 ++---
.../drm/nouveau/nvkm/subdev/mmu/vmmgp100.c | 7 ++---
3 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/include/nvkm/core/memory.h
b/drivers/gpu/drm/nouveau/include/nvkm/core/memory.h
index b23bf6109f2d..29c60fbed167 100644
--- a/drivers/gpu/drm/nouveau/include/nvkm/core/memory.h
+++ b/drivers/gpu/drm/nouveau/include/nvkm/core/memory.h
@@ -64,6 +64,34 @@ void nvkm_memory_tags_put(struct nvkm_memory *, struct
nvkm_device *,
#define nvkm_memory_map(p,o,vm,va,av,ac)
\
(p)->func->map((p),(o),(vm),(va),(av),(ac))
+static inline u32
+nvkm_memory_aperture(struct nvkm_memory *mem)
+{
+ enum nvkm_memory_target target = nvkm_memory_target(mem);
+
+ switch (target) {
+ case NVKM_MEM_TARGET_VRAM:
+ return 0;
+
+ case NVKM_MEM_TARGET_HOST:
+ return 2;
+
+ case NVKM_MEM_TARGET_NCOH:
+ return 3;
+
+ default:
+ break;
+ }
+
+ /*
+ * This is invalid, so warn about this loudly. However, return 0 to
+ * avoid writing garbage into registers. 0 is the VRAM aperture and
+ * might still work in most cases.
+ */
+ WARN(1, "invalid memory target: %d\n", target);
+ return 0;
+}
+
/* accessor macros - kmap()/done() must bracket use of the other accessor
* macros to guarantee correct behaviour across all chipsets
*/
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgf100.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgf100.c
index ab6424faf84c..ffa64c0d3eda 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgf100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgf100.c
@@ -248,8 +248,9 @@ gf100_vmm_valid(struct nvkm_vmm *vmm, void *argv, u32 argc,
struct nvkm_device *device = vmm->mmu->subdev.device;
struct nvkm_memory *memory = map->memory;
u8 kind, priv, ro, vol;
- int kindn, aper, ret = -ENOSYS;
+ int kindn, ret = -ENOSYS;
const u8 *kindm;
+ u32 aper;
map->next = (1 << page->shift) >> 8;
map->type = map->ctag = 0;
@@ -270,9 +271,7 @@ gf100_vmm_valid(struct nvkm_vmm *vmm, void *argv, u32 argc,
return ret;
}
- aper = vmm->func->aper(target);
- if (WARN_ON(aper < 0))
- return aper;
+ aper = nvkm_memory_aperture(map->memory);
kindm = vmm->mmu->func->kind(vmm->mmu, &kindn);
if (kind >= kindn || kindm[kind] == 0xff) {
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c
index b4f519768d5e..4a1a658328e5 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c
@@ -321,8 +321,9 @@ gp100_vmm_valid(struct nvkm_vmm *vmm, void *argv, u32 argc,
struct nvkm_device *device = vmm->mmu->subdev.device;
struct nvkm_memory *memory = map->memory;
u8 kind, priv, ro, vol;
- int kindn, aper, ret = -ENOSYS;
+ int kindn, ret = -ENOSYS;
const u8 *kindm;
+ u32 aper;
map->next = (1ULL << page->shift) >> 4;
map->type = 0;
@@ -343,9 +344,7 @@ gp100_vmm_valid(struct nvkm_vmm *vmm, void *argv, u32 argc,
return ret;
}
- aper = vmm->func->aper(target);
- if (WARN_ON(aper < 0))
- return aper;
+ aper = nvkm_memory_aperture(map->memory);
kindm = vmm->mmu->func->kind(vmm->mmu, &kindn);
if (kind >= kindn || kindm[kind] == 0xff) {
--
2.23.0
Thierry Reding
2019-Sep-16 15:17 UTC
[Nouveau] [PATCH 5/6] drm/nouveau: Remove unused nvkm_vmm_func->aper() implementations
From: Thierry Reding <treding at nvidia.com>
These implementations are now all unused. Remove them.
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h | 2 --
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgf100.c | 14 --------------
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk104.c | 2 --
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c | 2 --
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm200.c | 2 --
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c | 2 --
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c | 1 -
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c | 1 -
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgv100.c | 1 -
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c | 1 -
10 files changed, 28 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h
index 9862f44ac8b5..767870c2d24c 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h
@@ -140,7 +140,6 @@ struct nvkm_vmm_func {
int (*join)(struct nvkm_vmm *, struct nvkm_memory *inst);
void (*part)(struct nvkm_vmm *, struct nvkm_memory *inst);
- int (*aper)(enum nvkm_memory_target);
int (*valid)(struct nvkm_vmm *, void *argv, u32 argc,
struct nvkm_vmm_map *);
void (*flush)(struct nvkm_vmm *, int depth);
@@ -206,7 +205,6 @@ int gf100_vmm_new_(const struct nvkm_vmm_func *, const
struct nvkm_vmm_func *,
int gf100_vmm_join_(struct nvkm_vmm *, struct nvkm_memory *, u64 base);
int gf100_vmm_join(struct nvkm_vmm *, struct nvkm_memory *);
void gf100_vmm_part(struct nvkm_vmm *, struct nvkm_memory *);
-int gf100_vmm_aper(enum nvkm_memory_target);
int gf100_vmm_valid(struct nvkm_vmm *, void *, u32, struct nvkm_vmm_map *);
void gf100_vmm_flush(struct nvkm_vmm *, int);
void gf100_vmm_invalidate(struct nvkm_vmm *, u32 type);
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgf100.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgf100.c
index ffa64c0d3eda..ccf5a92d7b54 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgf100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgf100.c
@@ -318,18 +318,6 @@ gf100_vmm_valid(struct nvkm_vmm *vmm, void *argv, u32 argc,
return 0;
}
-int
-gf100_vmm_aper(enum nvkm_memory_target target)
-{
- switch (target) {
- case NVKM_MEM_TARGET_VRAM: return 0;
- case NVKM_MEM_TARGET_HOST: return 2;
- case NVKM_MEM_TARGET_NCOH: return 3;
- default:
- return -EINVAL;
- }
-}
-
void
gf100_vmm_part(struct nvkm_vmm *vmm, struct nvkm_memory *inst)
{
@@ -370,7 +358,6 @@ static const struct nvkm_vmm_func
gf100_vmm_17 = {
.join = gf100_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gf100_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
@@ -385,7 +372,6 @@ static const struct nvkm_vmm_func
gf100_vmm_16 = {
.join = gf100_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gf100_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk104.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk104.c
index 0b59c01fd146..8efd147fa930 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk104.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk104.c
@@ -68,7 +68,6 @@ static const struct nvkm_vmm_func
gk104_vmm_17 = {
.join = gf100_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gf100_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
@@ -83,7 +82,6 @@ static const struct nvkm_vmm_func
gk104_vmm_16 = {
.join = gf100_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gf100_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c
index 999b953505b3..774b6fe9d4a9 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c
@@ -45,7 +45,6 @@ static const struct nvkm_vmm_func
gk20a_vmm_17 = {
.join = gf100_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gk20a_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
@@ -60,7 +59,6 @@ static const struct nvkm_vmm_func
gk20a_vmm_16 = {
.join = gf100_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gk20a_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm200.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm200.c
index 2e61af02d4d8..c18f1c296de5 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm200.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm200.c
@@ -110,7 +110,6 @@ static const struct nvkm_vmm_func
gm200_vmm_17 = {
.join = gm200_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gf100_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
@@ -126,7 +125,6 @@ static const struct nvkm_vmm_func
gm200_vmm_16 = {
.join = gm200_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gf100_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c
index f5d7819c4a40..d6f61403de34 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c
@@ -25,7 +25,6 @@ static const struct nvkm_vmm_func
gm20b_vmm_17 = {
.join = gm200_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gk20a_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
@@ -41,7 +40,6 @@ static const struct nvkm_vmm_func
gm20b_vmm_16 = {
.join = gm200_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gk20a_vmm_valid,
.flush = gf100_vmm_flush,
.invalidate_pdb = gf100_vmm_invalidate_pdb,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c
index 4a1a658328e5..d7d1b2e4fb61 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c
@@ -487,7 +487,6 @@ static const struct nvkm_vmm_func
gp100_vmm = {
.join = gp100_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gp100_vmm_valid,
.flush = gp100_vmm_flush,
.mthd = gp100_vmm_mthd,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c
index ffe84ea2f7d9..a41ebdbdc216 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c
@@ -43,7 +43,6 @@ static const struct nvkm_vmm_func
gp10b_vmm = {
.join = gp100_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gp10b_vmm_valid,
.flush = gp100_vmm_flush,
.mthd = gp100_vmm_mthd,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgv100.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgv100.c
index f0e21f63253a..b1260bdeef9e 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgv100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgv100.c
@@ -63,7 +63,6 @@ static const struct nvkm_vmm_func
gv100_vmm = {
.join = gv100_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gp100_vmm_valid,
.flush = gp100_vmm_flush,
.mthd = gp100_vmm_mthd,
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c
index be91cffc3b52..078319f890b6 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c
@@ -53,7 +53,6 @@ static const struct nvkm_vmm_func
tu102_vmm = {
.join = gv100_vmm_join,
.part = gf100_vmm_part,
- .aper = gf100_vmm_aper,
.valid = gp100_vmm_valid,
.flush = tu102_vmm_flush,
.mthd = gp100_vmm_mthd,
--
2.23.0
Thierry Reding
2019-Sep-16 15:17 UTC
[Nouveau] [PATCH 6/6] drm/nouveau: Program aperture field where necessary
From: Thierry Reding <treding at nvidia.com>
Some registers and instance block entries need the aperture to be
programmed correctly. This is important on recent Tegra GPUs where
the GPU actually checks the value of this field and faults if an
invalid aperture is programmed.
For example GV11B no longer supports VRAM and all memory is already
allocated from system (coherent or non-coherent), so make sure to
also program the right aperture.
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
drivers/gpu/drm/nouveau/nvkm/engine/fifo/gpfifogk104.c | 7 +++++--
drivers/gpu/drm/nouveau/nvkm/engine/fifo/gpfifogv100.c | 5 +++--
drivers/gpu/drm/nouveau/nvkm/engine/fifo/gv100.c | 7 ++++++-
drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c | 3 ++-
4 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gpfifogk104.c
b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gpfifogk104.c
index 728a1edbf98c..843ebb41dbc6 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gpfifogk104.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gpfifogk104.c
@@ -201,6 +201,7 @@ gk104_fifo_gpfifo_fini(struct nvkm_fifo_chan *base)
void
gk104_fifo_gpfifo_init(struct nvkm_fifo_chan *base)
{
+ u32 aperture = nvkm_memory_aperture(base->inst->memory) << 28;
struct gk104_fifo_chan *chan = gk104_fifo_chan(base);
struct gk104_fifo *fifo = chan->fifo;
struct nvkm_device *device = fifo->base.engine.subdev.device;
@@ -208,7 +209,7 @@ gk104_fifo_gpfifo_init(struct nvkm_fifo_chan *base)
u32 coff = chan->base.chid * 8;
nvkm_mask(device, 0x800004 + coff, 0x000f0000, chan->runl << 16);
- nvkm_wr32(device, 0x800000 + coff, 0x80000000 | addr);
+ nvkm_wr32(device, 0x800000 + coff, 0x80000000 | aperture | addr);
if (list_empty(&chan->head) && !chan->killed) {
gk104_fifo_runlist_insert(fifo, chan);
@@ -250,6 +251,7 @@ gk104_fifo_gpfifo_new_(struct gk104_fifo *fifo, u64
*runlists, u16 *chid,
unsigned long engm;
u64 subdevs = 0;
u64 usermem;
+ u32 target;
if (!vmm || runlist < 0 || runlist >= fifo->runlist_nr)
return -EINVAL;
@@ -303,10 +305,11 @@ gk104_fifo_gpfifo_new_(struct gk104_fifo *fifo, u64
*runlists, u16 *chid,
nvkm_wo32(fifo->user.mem, usermem + i, 0x00000000);
nvkm_done(fifo->user.mem);
usermem = nvkm_memory_addr(fifo->user.mem) + usermem;
+ target = nvkm_memory_aperture(fifo->user.mem);
/* RAMFC */
nvkm_kmap(chan->base.inst);
- nvkm_wo32(chan->base.inst, 0x08, lower_32_bits(usermem));
+ nvkm_wo32(chan->base.inst, 0x08, lower_32_bits(usermem) | target);
nvkm_wo32(chan->base.inst, 0x0c, upper_32_bits(usermem));
nvkm_wo32(chan->base.inst, 0x10, 0x0000face);
nvkm_wo32(chan->base.inst, 0x30, 0xfffff902);
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gpfifogv100.c
b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gpfifogv100.c
index a7462cf59d65..97d084ffcfd5 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gpfifogv100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gpfifogv100.c
@@ -132,7 +132,7 @@ gv100_fifo_gpfifo_new_(const struct nvkm_fifo_chan_func
*func,
unsigned long engm;
u64 subdevs = 0;
u64 usermem, mthd;
- u32 size;
+ u32 size, target;
if (!vmm || runlist < 0 || runlist >= fifo->runlist_nr)
return -EINVAL;
@@ -183,6 +183,7 @@ gv100_fifo_gpfifo_new_(const struct nvkm_fifo_chan_func
*func,
nvkm_wo32(fifo->user.mem, usermem + i, 0x00000000);
nvkm_done(fifo->user.mem);
usermem = nvkm_memory_addr(fifo->user.mem) + usermem;
+ target = nvkm_memory_target(fifo->user.mem);
/* Allocate fault method buffer (magics come from nvgpu). */
size = nvkm_rd32(device, 0x104028); /* NV_PCE_PCE_MAP */
@@ -200,7 +201,7 @@ gv100_fifo_gpfifo_new_(const struct nvkm_fifo_chan_func
*func,
/* RAMFC */
nvkm_kmap(chan->base.inst);
- nvkm_wo32(chan->base.inst, 0x008, lower_32_bits(usermem));
+ nvkm_wo32(chan->base.inst, 0x008, lower_32_bits(usermem) | target);
nvkm_wo32(chan->base.inst, 0x00c, upper_32_bits(usermem));
nvkm_wo32(chan->base.inst, 0x010, 0x0000face);
nvkm_wo32(chan->base.inst, 0x030, 0x7ffff902);
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gv100.c
b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gv100.c
index 6ee1bb32a071..449f669f43b0 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gv100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gv100.c
@@ -32,11 +32,16 @@ void
gv100_fifo_runlist_chan(struct gk104_fifo_chan *chan,
struct nvkm_memory *memory, u32 offset)
{
+ struct nvkm_memory *instmem = chan->base.inst->memory;
struct nvkm_memory *usermem = chan->fifo->user.mem;
const u64 user = nvkm_memory_addr(usermem) + (chan->base.chid * 0x200);
const u64 inst = chan->base.inst->addr;
+ u64 target;
- nvkm_wo32(memory, offset + 0x0, lower_32_bits(user));
+ target = (u64)nvkm_memory_aperture(usermem) << 6 |
+ (u64)nvkm_memory_aperture(instmem) << 4;
+
+ nvkm_wo32(memory, offset + 0x0, lower_32_bits(user) | target);
nvkm_wo32(memory, offset + 0x4, upper_32_bits(user));
nvkm_wo32(memory, offset + 0x8, lower_32_bits(inst) | chan->base.chid);
nvkm_wo32(memory, offset + 0xc, upper_32_bits(inst));
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
index a3dcb09a40ee..5b193a7bf5de 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
@@ -54,7 +54,8 @@ gf100_bar_bar1_init(struct nvkm_bar *base)
struct nvkm_device *device = base->subdev.device;
struct gf100_bar *bar = gf100_bar(base);
const u32 addr = nvkm_memory_addr(bar->bar[1].inst) >> 12;
- nvkm_wr32(device, 0x001704, 0x80000000 | addr);
+ u32 target = nvkm_memory_aperture(bar->bar[1].inst) << 28;
+ nvkm_wr32(device, 0x001704, 0x80000000 | target | addr);
}
struct nvkm_vmm *
--
2.23.0
Ben Skeggs
2019-Sep-17 03:43 UTC
[Nouveau] [PATCH 3/6] drm/nouveau: Remove bogus gk20a aperture callback
On Tue, 17 Sep 2019 at 01:18, Thierry Reding <thierry.reding at gmail.com> wrote:> > From: Thierry Reding <treding at nvidia.com> > > The gk20a (as well as all subsequent Tegra instantiations of the GPU) do > in fact use the same apertures as regular GPUs. Prior to gv11b there are > no checks in hardware for the aperture, so we get away with setting VRAM > as the aperture for buffers that are actually in system memory.Can GK20A take comptags with aperture set to system memory? For some reason I can recall, I was under the impression PTEs needed to be pointed at "vidmem" (despite them actually accessing system memory anyway) on Tegra parts for compression to work? I could be mistaken though. Ben.> > Signed-off-by: Thierry Reding <treding at nvidia.com> > --- > drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h | 1 - > drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c | 10 ---------- > drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c | 4 ++-- > drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c | 2 +- > 4 files changed, 3 insertions(+), 14 deletions(-) > > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h > index fb3a9e8bb9cd..9862f44ac8b5 100644 > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h > @@ -212,7 +212,6 @@ void gf100_vmm_flush(struct nvkm_vmm *, int); > void gf100_vmm_invalidate(struct nvkm_vmm *, u32 type); > void gf100_vmm_invalidate_pdb(struct nvkm_vmm *, u64 addr); > > -int gk20a_vmm_aper(enum nvkm_memory_target); > int gk20a_vmm_valid(struct nvkm_vmm *, void *, u32, struct nvkm_vmm_map *); > > int gm200_vmm_new_(const struct nvkm_vmm_func *, const struct nvkm_vmm_func *, > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c > index 16d7bf727292..999b953505b3 100644 > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgk20a.c > @@ -25,16 +25,6 @@ > > #include <core/memory.h> > > -int > -gk20a_vmm_aper(enum nvkm_memory_target target) > -{ > - switch (target) { > - case NVKM_MEM_TARGET_NCOH: return 0; > - default: > - return -EINVAL; > - } > -} > - > int > gk20a_vmm_valid(struct nvkm_vmm *vmm, void *argv, u32 argc, > struct nvkm_vmm_map *map) > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c > index 7a6066d886cd..f5d7819c4a40 100644 > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgm20b.c > @@ -25,7 +25,7 @@ static const struct nvkm_vmm_func > gm20b_vmm_17 = { > .join = gm200_vmm_join, > .part = gf100_vmm_part, > - .aper = gk20a_vmm_aper, > + .aper = gf100_vmm_aper, > .valid = gk20a_vmm_valid, > .flush = gf100_vmm_flush, > .invalidate_pdb = gf100_vmm_invalidate_pdb, > @@ -41,7 +41,7 @@ static const struct nvkm_vmm_func > gm20b_vmm_16 = { > .join = gm200_vmm_join, > .part = gf100_vmm_part, > - .aper = gk20a_vmm_aper, > + .aper = gf100_vmm_aper, > .valid = gk20a_vmm_valid, > .flush = gf100_vmm_flush, > .invalidate_pdb = gf100_vmm_invalidate_pdb, > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c > index 180c8f006e32..ffe84ea2f7d9 100644 > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp10b.c > @@ -43,7 +43,7 @@ static const struct nvkm_vmm_func > gp10b_vmm = { > .join = gp100_vmm_join, > .part = gf100_vmm_part, > - .aper = gk20a_vmm_aper, > + .aper = gf100_vmm_aper, > .valid = gp10b_vmm_valid, > .flush = gp100_vmm_flush, > .mthd = gp100_vmm_mthd, > -- > 2.23.0 > > _______________________________________________ > Nouveau mailing list > Nouveau at lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/nouveau
Ben Skeggs
2019-Sep-17 03:47 UTC
[Nouveau] [PATCH 1/6] drm/nouveau: fault: Store aperture in fault information
On Tue, 17 Sep 2019 at 01:18, Thierry Reding <thierry.reding at gmail.com> wrote:> > From: Thierry Reding <treding at nvidia.com> > > The fault information register contains data about the aperture that > caused the failure. This can be useful in debugging aperture related > programming bugs.Should this be parsed for fault buffer entries too?> > Signed-off-by: Thierry Reding <treding at nvidia.com> > --- > drivers/gpu/drm/nouveau/include/nvkm/subdev/fault.h | 1 + > drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c | 3 ++- > drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c | 1 + > 3 files changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/fault.h b/drivers/gpu/drm/nouveau/include/nvkm/subdev/fault.h > index 97322f95b3ee..1cc862bc1122 100644 > --- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/fault.h > +++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/fault.h > @@ -21,6 +21,7 @@ struct nvkm_fault_data { > u64 addr; > u64 inst; > u64 time; > + u8 aperture; > u8 engine; > u8 valid; > u8 gpc; > diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c > index 5d4b695cab8e..81cbe1cc4804 100644 > --- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c > +++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/gk104.c > @@ -519,9 +519,10 @@ gk104_fifo_fault(struct nvkm_fifo *base, struct nvkm_fault_data *info) > chan = nvkm_fifo_chan_inst_locked(&fifo->base, info->inst); > > nvkm_error(subdev, > - "fault %02x [%s] at %016llx engine %02x [%s] client %02x " > + "fault %02x [%s] at %016llx aperture %02x engine %02x [%s] client %02x " > "[%s%s] reason %02x [%s] on channel %d [%010llx %s]\n", > info->access, ea ? ea->name : "", info->addr, > + info->aperture, > info->engine, ee ? ee->name : en, > info->client, ct, ec ? ec->name : "", > info->reason, er ? er->name : "", chan ? chan->chid : -1, > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c > index 6747f09c2dc3..b5e32295237b 100644 > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c > @@ -138,6 +138,7 @@ gv100_fault_intr_fault(struct nvkm_fault *fault) > info.inst = ((u64)insthi << 32) | (info0 & 0xfffff000); > info.time = 0; > info.engine = (info0 & 0x000000ff); > + info.aperture = (info0 & 0x00000c00) >> 10; > info.valid = (info1 & 0x80000000) >> 31; > info.gpc = (info1 & 0x1f000000) >> 24; > info.hub = (info1 & 0x00100000) >> 20; > -- > 2.23.0 > > _______________________________________________ > Nouveau mailing list > Nouveau at lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/nouveau
Ben Skeggs
2019-Sep-17 03:48 UTC
[Nouveau] [PATCH 2/6] drm/nouveau: fault: Widen engine field
On Tue, 17 Sep 2019 at 01:18, Thierry Reding <thierry.reding at gmail.com> wrote:> > From: Thierry Reding <treding at nvidia.com> > > The engine field in the FIFO fault information registers is actually 9 > bits wide.Looks like this is true for fault buffer parsing too.> > Signed-off-by: Thierry Reding <treding at nvidia.com> > --- > drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c > index b5e32295237b..28306c5f6651 100644 > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fault/gv100.c > @@ -137,8 +137,8 @@ gv100_fault_intr_fault(struct nvkm_fault *fault) > info.addr = ((u64)addrhi << 32) | addrlo; > info.inst = ((u64)insthi << 32) | (info0 & 0xfffff000); > info.time = 0; > - info.engine = (info0 & 0x000000ff); > info.aperture = (info0 & 0x00000c00) >> 10; > + info.engine = (info0 & 0x000001ff); > info.valid = (info1 & 0x80000000) >> 31; > info.gpc = (info1 & 0x1f000000) >> 24; > info.hub = (info1 & 0x00100000) >> 20; > -- > 2.23.0 > > _______________________________________________ > Nouveau mailing list > Nouveau at lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/nouveau
Maybe Matching Threads
- [PATCH 3/6] drm/nouveau: Remove bogus gk20a aperture callback
- [PATCH 00/11] drm/nouveau: Enable GP10B by default
- [PATCH 3/6] drm/nouveau: Remove bogus gk20a aperture callback
- [PATCH 3/6] drm/nouveau: Remove bogus gk20a aperture callback
- [RESEND PATCH 0/3] nouveau: fixes for SVM