Hi,
we have a blank screen on a mac book retina since kernel 3.16.
The behavour is a bit weird:
In kernel 3.16 and higher it is like this, when you reset all display
and xrandr settings, sometimes the screen comes up in the highest
possible resolution.
But when you try to choose another resolution the screen stays turns black.
But in 80% of the tries it stays black, when the saved screen
resolutions is another than the highest resolution it always stays black.
As imirkin mentioned on irc, the problem is caused by the "nouveau E[
PDISP][0000:01:00.0] 00:0006:0f44: link training failed ".
The last working kernel was 3.15.10.
I've tried to bisect it, but i wasn't able to have the notebook for the
whole time.
And so we tried to do the rest of the bisects remote, but i think we've
messed something up in the coordination :(
I have no chance to try a bisect again (not when i start with 3.15.10
good and 3.16 bad), it takes to much time and i don't have access to the
notebook for so long.
If we really need a bisect, maybe you could help me with a better
starting and ending version to try :)
Logfiles and stuff can be found at the end of the mail, please let me
know if you prefer pastebin stuff.
best regards
Harald
Here is the bisect log:
Bisecting: a merge base must be tested
[1860e379875dfe7271c649058aeddffe5afd9d0d] Linux 3.15
Bisecting: 6940 revisions left to test after this (roughly 13 steps)
[7b215de3d0abbc4f6daf2efd19e8809af0564490] Merge branch 'i2c/for-next'
of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
Bisecting: 3892 revisions left to test after this (roughly 12 steps)
[0430e49b6e7c6b5e076be8fefdee089958c9adad] ima: introduce ima_kernel_read()
Bisecting: 1567 revisions left to test after this (roughly 11 steps)
[2937f5efa5754754daf46de745f67350f7f06ec2] Merge branch 'for_linus' of
git://cavan.codon.org.uk/platform-drivers-x86
Bisecting: 785 revisions left to test after this (roughly 10 steps)
[bc1dfff04a5d4064ba0db1fab13f84ab4f333d2b] Merge branch
'drm-nouveau-next' of
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
Bisecting: 402 revisions left to test after this (roughly 9 steps)
[4fa62c890cea83f28c30e1d5dc8fc86f61210280] drm/i915: Move buffer pinning
and ring selection to intel_crtc_page_flip()
Bisecting: 189 revisions left to test after this (roughly 8 steps)
[aeab0b5af7df88284d101abf8d121f0e913b81ff] drm/i915: disable runtime PM
if RC6 is disabled
Bisecting: 94 revisions left to test after this (roughly 7 steps)
[9d0a6fa6c5e618bd978d625a215dc4a240ba3b3c] drm/i915: add render state
initialization
Bisecting: 47 revisions left to test after this (roughly 6 steps)
[b3a3f03d7b1cfecf055e35289371f42a401fdd94] drm/i915: Fix ILK GPU reset
domain bits
Bisecting: 23 revisions left to test after this (roughly 5 steps)
[c0c353299c48b19c95de1e7bda494c0c71248c0c] drm/i915/chv: Fix gmbus for
port D
Bisecting: 11 revisions left to test after this (roughly 4 steps)
[1966e59ec1075597eff4d7feb3d11536a242d0eb] drm/i915/chv: Use RMW to
toggle swing calc init
Bisecting: 5 revisions left to test after this (roughly 3 steps)
[525997e00bd32c3e25d5f77c26703f76c498f424] drm/i915: shuffle panel code
Bisecting: 2 revisions left to test after this (roughly 2 steps)
[75f7f3ec600524c9544cc31695155f1a9ddbe1d9] drm/i915: Fix mmio vs. CS
flip race on ILK+
Bisecting: 0 revisions left to test after this (roughly 1 step)
[6304cd91e7f05f8802ea6f91287cac09741d9c46] drm/i915: Drop the excessive
vblank waits from modeset codepaths
4fa62c890cea83f28c30e1d5dc8fc86f61210280 is the first bad commit
commit 4fa62c890cea83f28c30e1d5dc8fc86f61210280
Author: Ville Syrjälä <ville.syrjala at linux.intel.com>
Date: Tue Apr 15 21:41:38 2014 +0300
drm/i915: Move buffer pinning and ring selection to
intel_crtc_page_flip()
All of the .queue_flip() callbacks duplicate the same code to pin the
buffers and calculate the gtt_offset. Move that code to
intel_crtc_page_flip(). In order to do that we must also move the ring
selection logic there.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
:040000 040000 829ebf0fa1e7b31c1623aa498efc92bca429a483
511140874cd4759c4eadef87ee9968808efa5f2a M drivers
here is the hardware/log information i've collected:
Wed Apr 1 17:31:21 2015
----------------------------------------------------------------------
###X-running = 1
###X-videodriver = nouveau
###X-xorglog
----------------------------------------------------------------------
[ 24.256]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 24.256] X Protocol Version 11, Revision 0
[ 24.256] Build Operating System: Linux 3.10.10-BB5000-compat-R316
i686 Gentoo
[ 24.256] Current Operating System: Linux ThinClient
3.18.10-BB5000-mthc-R350 #3 SMP Fri Mar 27 14:16:35 CET 2015 i686
[ 24.256] Kernel command line: BOOT_IMAGE=/src7/vmbbmthc root=8:23
uuid=d93e2344-84f1-4944-a59c-a8d1a77f1632 confdev=/dev/sdb8 panic=10
certdev=/dev/sdb3 bootlang=de_DE console=tty1 x11prop=0 x11vesa=
loglevel=1 splash=silent hwtest=1 AUTOSAVETEST=1 conftype=auto
[ 24.256] Build Date: 12 March 2015 08:57:33PM
[ 24.256]
[ 24.256] Current version of pixman: 0.32.6
[ 24.256] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.256] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.256] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 1
17:30:52 2015
[ 24.256] (++) Using config file: "/var/syscfg/etc/X11/XF86Config"
[ 24.256] (==) ServerLayout "Simple Layout"
[ 24.256] (**) |-->Screen "Screen 1" (0)
[ 24.256] (**) | |-->Monitor "Monitor 1"
[ 24.257] (**) | |-->Device "Device 1"
[ 24.257] (**) Option "BlankTime" "0"
[ 24.257] (**) Option "StandbyTime" "0"
[ 24.257] (**) Option "SuspendTime" "0"
[ 24.257] (**) Option "OffTime" "0"
[ 24.257] (**) Option "NoPM" "true"
[ 24.257] (**) Option "AutoAddDevices" "True"
[ 24.257] (**) Automatically adding devices
[ 24.257] (==) Automatically enabling devices
[ 24.257] (==) Automatically adding GPU devices
[ 24.257] (WW) The directory "/usr/X11R6/lib/X11/fonts/misc/" does
not exist.
[ 24.257] Entry deleted from font path.
[ 24.257] (WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi/" does
not exist.
[ 24.257] Entry deleted from font path.
[ 24.257] (WW) The directory "/usr/X11R6/lib/X11/fonts/truetype/"
does not exist.
[ 24.257] Entry deleted from font path.
[ 24.257] (WW) The directory "/usr/share/fonts/OTF/" does not
exist.
[ 24.257] Entry deleted from font path.
[ 24.257] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 24.257] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.257] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 24.257] (II) Loader magic: 0xb7801640
[ 24.257] (II) Module ABI versions:
[ 24.257] X.Org ANSI C Emulation: 0.4
[ 24.257] X.Org Video Driver: 18.0
[ 24.257] X.Org XInput driver : 21.0
[ 24.257] X.Org Server Extension : 8.0
[ 24.257] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 24.260] (--) PCI:*(0:1:0:0) 10de:0fe9:106b:0130 rev 161, Mem @
0xc0000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @
0x00001000/128, BIOS @ 0x????????/524288
[ 24.260] (WW) "glx" will not be loaded unless you've specified
it to
be loaded elsewhere.
[ 24.260] (II) "glx" will be loaded even though the default is to
disable it.
[ 24.260] (II) LoadModule: "dbe"
[ 24.260] (II) Module "dbe" already built-in
[ 24.260] (II) LoadModule: "extmod"
[ 24.260] (II) Module "extmod" already built-in
[ 24.260] (II) LoadModule: "nouveau"
[ 24.260] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 24.282] (II) Module nouveau: vendor="X.Org Foundation"
[ 24.282] compiled for 1.16.4, module version = 1.0.11
[ 24.282] Module class: X.Org Video Driver
[ 24.282] ABI class: X.Org Video Driver, version 18.0
[ 24.282] (II) NOUVEAU driver
[ 24.282] (II) NOUVEAU driver for NVIDIA chipset families :
[ 24.282] RIVA TNT (NV04)
[ 24.282] RIVA TNT2 (NV05)
[ 24.282] GeForce 256 (NV10)
[ 24.282] GeForce 2 (NV11, NV15)
[ 24.282] GeForce 4MX (NV17, NV18)
[ 24.282] GeForce 3 (NV20)
[ 24.282] GeForce 4Ti (NV25, NV28)
[ 24.282] GeForce FX (NV3x)
[ 24.282] GeForce 6 (NV4x)
[ 24.282] GeForce 7 (G7x)
[ 24.282] GeForce 8 (G8x)
[ 24.282] GeForce GTX 200 (NVA0)
[ 24.282] GeForce GTX 400 (NVC0)
[ 24.282] (++) using VT number 5
[ 25.547] (II) [drm] nouveau interface version: 1.2.1
[ 25.547] (II) Loading sub module "dri2"
[ 25.547] (II) LoadModule: "dri2"
[ 25.547] (II) Module "dri2" already built-in
[ 25.547] (--) NOUVEAU(0): Chipset: "NVIDIA NVE7"
[ 25.547] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 25.547] (==) NOUVEAU(0): RGB weight 888
[ 25.547] (==) NOUVEAU(0): Default visual is TrueColor
[ 25.547] (**) NOUVEAU(0): Option "NoAccel" "False"
[ 25.547] (==) NOUVEAU(0): Using HW cursor
[ 25.547] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 25.547] (==) NOUVEAU(0): Page flipping enabled
[ 25.547] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 25.547] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 25.547] (II) NOUVEAU(0): Initializing outputs ...
[ 25.551] (II) NOUVEAU(0): Output eDP-1 using monitor section Monitor 1
[ 25.555] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 25.560] (II) NOUVEAU(0): Output DP-2 has no monitor section
[ 25.562] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 25.562] (II) NOUVEAU(0): 4 crtcs needed for screen.
[ 25.567] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 25.567] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 25.567] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
[ 25.567] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
[ 25.570] (II) NOUVEAU(0): EDID for output eDP-1
[ 25.570] (II) NOUVEAU(0): Manufacturer: APP Model: a019 Serial#: 0
[ 25.570] (II) NOUVEAU(0): Year: 2012 Week: 48
[ 25.570] (II) NOUVEAU(0): EDID Version: 1.4
[ 25.570] (II) NOUVEAU(0): Digital Display Input
[ 25.570] (II) NOUVEAU(0): 8 bits per channel
[ 25.570] (II) NOUVEAU(0): Digital interface is DisplayPort
[ 25.570] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 25.570] (II) NOUVEAU(0): Gamma: 2.20
[ 25.570] (II) NOUVEAU(0): No DPMS capabilities specified
[ 25.570] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4
[ 25.570] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 25.570] (II) NOUVEAU(0): Preferred mode is native pixel format and
refresh rate
[ 25.570] (II) NOUVEAU(0): redX: 0.653 redY: 0.334 greenX: 0.300
greenY: 0.620
[ 25.570] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312
whiteY: 0.329
[ 25.570] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 25.570] (II) NOUVEAU(0): Supported detailed timing:
[ 25.570] (II) NOUVEAU(0): clock: 337.8 MHz Image Size: 331 x 207 mm
[ 25.570] (II) NOUVEAU(0): h_active: 2880 h_sync: 2928 h_sync_end
2960 h_blank_end 3040 h_border: 0
[ 25.570] (II) NOUVEAU(0): v_active: 1800 v_sync: 1803 v_sync_end
1809 v_blanking: 1852 v_border: 0
[ 25.570] (II) NOUVEAU(0): Monitor name: Color LCD
[ 25.570] (II) NOUVEAU(0): EDID (in hex):
[ 25.570] (II) NOUVEAU(0): 00ffffffffffff00061019a000000000
[ 25.570] (II) NOUVEAU(0): 30160104a5211578026fb1a7554c9e25
[ 25.570] (II) NOUVEAU(0): 0c505400000001010101010101010101
[ 25.570] (II) NOUVEAU(0): 010101010101ef8340a0b00834703020
[ 25.570] (II) NOUVEAU(0): 36004bcf1000001a000000fc00436f6c
[ 25.570] (II) NOUVEAU(0): 6f72204c43440a202020000000100000
[ 25.570] (II) NOUVEAU(0): 00000000000000000000000000000010
[ 25.570] (II) NOUVEAU(0): 000000000000000000000000000000bc
[ 25.570] (II) NOUVEAU(0): Printing probed modes for output eDP-1
[ 25.570] (II) NOUVEAU(0): Modeline "2880x1800"x60.0 337.75 2880
2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 25.570] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920
2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920
2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600
1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680
1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400
1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280
1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280
1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152
1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024
1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832
912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664
720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744
808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664
720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 25.570] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664
720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 25.575] (II) NOUVEAU(0): EDID for output DP-1
[ 25.579] (II) NOUVEAU(0): EDID for output DP-2
[ 25.582] (II) NOUVEAU(0): EDID for output HDMI-1
[ 25.582] (II) NOUVEAU(0): Output eDP-1 connected
[ 25.582] (II) NOUVEAU(0): Output DP-1 disconnected
[ 25.582] (II) NOUVEAU(0): Output DP-2 disconnected
[ 25.582] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 25.582] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 25.582] (II) NOUVEAU(0): Output eDP-1 using initial mode 2880x1800
[ 25.582] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[ 25.582] (--) NOUVEAU(0): Virtual size is 2880x1800 (pitch 0)
[ 25.582] (**) NOUVEAU(0): Driver mode "2880x1800": 337.8 MHz
(scaled from 0.0 MHz), 111.1 kHz, 60.0 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "2880x1800"x60.0 337.75 2880
2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 25.582] (**) NOUVEAU(0): Driver mode "1920x1200": 193.2 MHz
(scaled from 0.0 MHz), 74.6 kHz, 59.9 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920
2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "1920x1080": 173.0 MHz
(scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920
2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "1600x1200": 161.0 MHz
(scaled from 0.0 MHz), 74.5 kHz, 59.9 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600
1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz
(scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680
1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz
(scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400
1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "1280x1024": 109.0 MHz
(scaled from 0.0 MHz), 63.7 kHz, 59.9 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280
1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "1280x960": 101.2 MHz
(scaled
from 0.0 MHz), 59.7 kHz, 59.9 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280
1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz
(scaled
from 0.0 MHz), 53.8 kHz, 60.0 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152
1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz
(scaled
from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024
1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled
from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832
912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled
from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664
720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled
from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744
808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled
from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664
720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 25.582] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled
from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 25.582] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664
720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 25.582] (++) NOUVEAU(0): DPI set to (96, 96)
[ 25.582] (II) Loading sub module "fb"
[ 25.582] (II) LoadModule: "fb"
[ 25.583] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.601] (II) Module fb: vendor="X.Org Foundation"
[ 25.601] compiled for 1.16.4, module version = 1.0.0
[ 25.601] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.601] (II) Loading sub module "shadowfb"
[ 25.601] (II) LoadModule: "shadowfb"
[ 25.601] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 25.607] (II) Module shadowfb: vendor="X.Org Foundation"
[ 25.607] compiled for 1.16.4, module version = 1.0.0
[ 25.607] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.607] (--) Depth 24 pixmap format is 32 bpp
[ 25.612] (II) NOUVEAU(0): Channel setup complete.
[ 25.613] (II) NOUVEAU(0): [COPY] async initialised.
[ 25.613] (II) NOUVEAU(0): [DRI2] Setup complete
[ 25.613] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 25.613] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 25.614] (II) Loading sub module "exa"
[ 25.614] (II) LoadModule: "exa"
[ 25.614] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 25.614] (II) Module exa: vendor="X.Org Foundation"
[ 25.614] compiled for 1.16.4, module version = 2.6.0
[ 25.614] ABI class: X.Org Video Driver, version 18.0
[ 25.614] (II) EXA(0): Driver allocated offscreen pixmaps
[ 25.614] (II) EXA(0): Driver registered support for the following
operations:
[ 25.614] (II) Solid
[ 25.614] (II) Copy
[ 25.614] (II) Composite (RENDER acceleration)
[ 25.614] (II) UploadToScreen
[ 25.614] (II) DownloadFromScreen
[ 25.614] (==) NOUVEAU(0): Backing store enabled
[ 25.614] (==) NOUVEAU(0): Silken mouse enabled
[ 25.614] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9
Textured Video.
[ 25.614] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 25.614] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 25.614] (--) RandR disabled
[ 25.628] (II) NOUVEAU(0): NVEnterVT is called.
[ 25.655] (II) NOUVEAU(0): Setting screen physical size to 761 x 476
[ 25.655] resize called 2880 1800
[ 25.767] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 25.767] (**) Power Button: Applying InputClass "keyboards"
[ 25.767] (II) LoadModule: "evdev"
[ 25.768] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.800] (II) Module evdev: vendor="X.Org Foundation"
[ 25.800] compiled for 1.16.4, module version = 2.9.1
[ 25.800] Module class: X.Org XInput Driver
[ 25.800] ABI class: X.Org XInput driver, version 21.0
[ 25.800] (II) Using input driver 'evdev' for 'Power Button'
[ 25.800] (**) Option "SendCoreEvents" "true"
[ 25.800] (**) Power Button: always reports core events
[ 25.800] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 25.800] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.800] (--) evdev: Power Button: Found keys
[ 25.800] (II) evdev: Power Button: Configuring as keyboard
[ 25.800] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 25.800] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 25.800] (**) Option "xkb_rules" "evdev"
[ 25.800] (**) Option "xkb_model" "evdev"
[ 25.800] (**) Option "xkb_layout" "de"
[ 25.800] (**) Option "xkb_variant" "nodeadkeys"
[ 25.820] (II) config/udev: Adding input device Video Bus
(/dev/input/event5)
[ 25.820] (**) Video Bus: Applying InputClass "keyboards"
[ 25.820] (II) Using input driver 'evdev' for 'Video Bus'
[ 25.820] (**) Option "SendCoreEvents" "true"
[ 25.820] (**) Video Bus: always reports core events
[ 25.820] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 25.820] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 25.820] (--) evdev: Video Bus: Found keys
[ 25.820] (II) evdev: Video Bus: Configuring as keyboard
[ 25.820] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5/event5"
[ 25.820] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 7)
[ 25.820] (**) Option "xkb_rules" "evdev"
[ 25.820] (**) Option "xkb_model" "evdev"
[ 25.820] (**) Option "xkb_layout" "de"
[ 25.820] (**) Option "xkb_variant" "nodeadkeys"
[ 25.820] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 25.820] (**) Power Button: Applying InputClass "keyboards"
[ 25.820] (II) Using input driver 'evdev' for 'Power Button'
[ 25.820] (**) Option "SendCoreEvents" "true"
[ 25.820] (**) Power Button: always reports core events
[ 25.820] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 25.820] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.820] (--) evdev: Power Button: Found keys
[ 25.820] (II) evdev: Power Button: Configuring as keyboard
[ 25.820] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 25.820] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 8)
[ 25.820] (**) Option "xkb_rules" "evdev"
[ 25.820] (**) Option "xkb_model" "evdev"
[ 25.820] (**) Option "xkb_layout" "de"
[ 25.820] (**) Option "xkb_variant" "nodeadkeys"
[ 25.820] (II) config/udev: Adding input device Lid Switch
(/dev/input/event0)
[ 25.820] (II) No input driver specified, ignoring this device.
[ 25.820] (II) This device may have been added with another device file.
[ 25.820] (II) config/udev: Adding input device Sleep Button
(/dev/input/event2)
[ 25.820] (**) Sleep Button: Applying InputClass "keyboards"
[ 25.820] (II) Using input driver 'evdev' for 'Sleep Button'
[ 25.820] (**) Option "SendCoreEvents" "true"
[ 25.821] (**) Sleep Button: always reports core events
[ 25.821] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 25.821] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 25.821] (--) evdev: Sleep Button: Found keys
[ 25.821] (II) evdev: Sleep Button: Configuring as keyboard
[ 25.821] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 25.821] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 9)
[ 25.821] (**) Option "xkb_rules" "evdev"
[ 25.821] (**) Option "xkb_model" "evdev"
[ 25.821] (**) Option "xkb_layout" "de"
[ 25.821] (**) Option "xkb_variant" "nodeadkeys"
[ 25.821] (II) config/udev: Adding input device Apple Inc. Apple
Internal Keyboard / Trackpad (/dev/input/event7)
[ 25.821] (**) Apple Inc. Apple Internal Keyboard / Trackpad:
Applying InputClass "keyboards"
[ 25.821] (II) Using input driver 'evdev' for 'Apple Inc. Apple
Internal Keyboard / Trackpad'
[ 25.821] (**) Option "SendCoreEvents" "true"
[ 25.821] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always
reports core events
[ 25.821] (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad:
Device: "/dev/input/event7"
[ 25.821] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad:
Vendor 0x5ac Product 0x263
[ 25.821] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad:
Found keys
[ 25.821] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad:
Configuring as keyboard
[ 25.821] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:05AC:0263.0001/input/input7/event7"
[ 25.821] (II) XINPUT: Adding extended input device "Apple Inc. Apple
Internal Keyboard / Trackpad" (type: KEYBOARD, id 10)
[ 25.821] (**) Option "xkb_rules" "evdev"
[ 25.821] (**) Option "xkb_model" "evdev"
[ 25.821] (**) Option "xkb_layout" "de"
[ 25.821] (**) Option "xkb_variant" "nodeadkeys"
[ 25.821] (II) config/udev: Adding input device bcm5974
(/dev/input/event4)
[ 25.821] (**) bcm5974: Applying InputClass "synaptics"
[ 25.821] (II) LoadModule: "synaptics"
[ 25.822] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 25.828] (II) Module synaptics: vendor="X.Org Foundation"
[ 25.828] compiled for 1.16.4, module version = 1.8.1
[ 25.828] Module class: X.Org XInput Driver
[ 25.828] ABI class: X.Org XInput driver, version 21.0
[ 25.828] (II) Using input driver 'synaptics' for 'bcm5974'
[ 25.828] (**) Option "SendCoreEvents" "true"
[ 25.828] (**) bcm5974: always reports core events
[ 25.828] (**) Option "Device" "/dev/input/event4"
[ 25.991] (II) synaptics: bcm5974: found clickpad property
[ 25.991] (--) synaptics: bcm5974: x-axis range -4750 - 5280 (res 0)
[ 25.991] (--) synaptics: bcm5974: y-axis range -150 - 6730 (res 0)
[ 25.991] (--) synaptics: bcm5974: pressure range 0 - 256
[ 25.991] (--) synaptics: bcm5974: finger width range 0 - 16
[ 25.991] (--) synaptics: bcm5974: buttons: left double triple
[ 25.991] (--) synaptics: bcm5974: Vendor 0x5ac Product 0x263
[ 25.991] (**) Option "TouchpadOff" "0"
[ 25.991] (**) Option "RTCornerButton" "2"
[ 25.991] (**) Option "RBCornerButton" "3"
[ 25.991] (**) Option "TapButton1" "1"
[ 25.991] (**) Option "TapButton2" "2"
[ 25.991] (**) Option "TapButton3" "3"
[ 25.991] (--) synaptics: bcm5974: touchpad found
[ 25.991] (**) bcm5974: always reports core events
[ 26.060] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/input/input4/event4"
[ 26.060] (II) XINPUT: Adding extended input device "bcm5974"
(type:
TOUCHPAD, id 11)
[ 26.060] (**) synaptics: bcm5974: (accel) MinSpeed is now constant
deceleration 2.5
[ 26.060] (**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
[ 26.060] (**) synaptics: bcm5974: (accel) AccelFactor is now 0.016
[ 26.060] (**) Option "AccelerationScheme" "predictable"
[ 26.060] (**) bcm5974: (accel) keeping acceleration scheme 1
[ 26.060] (**) bcm5974: (accel) acceleration profile 1
[ 26.060] (**) bcm5974: (accel) acceleration factor: 2.000
[ 26.060] (**) bcm5974: (accel) acceleration threshold: 4
[ 26.061] (--) synaptics: bcm5974: touchpad found
[ 26.061] (II) config/udev: Adding input device bcm5974
(/dev/input/mouse0)
[ 26.061] (**) bcm5974: Applying InputClass "synaptics"
[ 26.061] (II) Using input driver 'synaptics' for 'bcm5974'
[ 26.061] (**) Option "SendCoreEvents" "true"
[ 26.061] (**) bcm5974: always reports core events
[ 26.061] (**) Option "Device" "/dev/input/mouse0"
[ 26.120] (EE) synaptics: bcm5974: Synaptics driver unable to detect
protocol
[ 26.120] (EE) PreInit returned 11 for "bcm5974"
[ 26.120] (II) UnloadModule: "synaptics"
[ 26.120] (II) config/udev: Adding input device HID 05ac:820a
(/dev/input/event6)
[ 26.120] (**) HID 05ac:820a: Applying InputClass "keyboards"
[ 26.120] (II) Using input driver 'evdev' for 'HID 05ac:820a'
[ 26.120] (**) Option "SendCoreEvents" "true"
[ 26.120] (**) HID 05ac:820a: always reports core events
[ 26.120] (**) evdev: HID 05ac:820a: Device: "/dev/input/event6"
[ 26.120] (--) evdev: HID 05ac:820a: Vendor 0x5ac Product 0x820a
[ 26.120] (--) evdev: HID 05ac:820a: Found keys
[ 26.120] (II) evdev: HID 05ac:820a: Configuring as keyboard
[ 26.120] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:05AC:820A.0003/input/input6/event6"
[ 26.120] (II) XINPUT: Adding extended input device "HID 05ac:820a"
(type: KEYBOARD, id 12)
[ 26.120] (**) Option "xkb_rules" "evdev"
[ 26.120] (**) Option "xkb_model" "evdev"
[ 26.120] (**) Option "xkb_layout" "de"
[ 26.120] (**) Option "xkb_variant" "nodeadkeys"
[ 26.121] (II) config/udev: Adding input device HID 05ac:820b
(/dev/input/event8)
[ 26.121] (**) HID 05ac:820b: Applying InputClass "mouses"
[ 26.121] (**) HID 05ac:820b: Applying InputClass "Surface Pro 3
cover"
[ 26.121] (II) Using input driver 'evdev' for 'HID 05ac:820b'
[ 26.121] (**) Option "SendCoreEvents" "true"
[ 26.121] (**) HID 05ac:820b: always reports core events
[ 26.121] (**) evdev: HID 05ac:820b: Device: "/dev/input/event8"
[ 26.121] (--) evdev: HID 05ac:820b: Vendor 0x5ac Product 0x820b
[ 26.121] (**) Option "IgnoreAbsoluteAxes" "True"
[ 26.121] (--) evdev: HID 05ac:820b: Found 3 mouse buttons
[ 26.121] (--) evdev: HID 05ac:820b: Found relative axes
[ 26.121] (--) evdev: HID 05ac:820b: Found x and y relative axes
[ 26.121] (II) evdev: HID 05ac:820b: Configuring as mouse
[ 26.121] (**) evdev: HID 05ac:820b: YAxisMapping: buttons 4 and 5
[ 26.121] (**) evdev: HID 05ac:820b: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.121] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:05AC:820B.0004/input/input8/event8"
[ 26.121] (II) XINPUT: Adding extended input device "HID 05ac:820b"
(type: MOUSE, id 13)
[ 26.121] (II) evdev: HID 05ac:820b: initialized for relative axes.
[ 26.121] (**) HID 05ac:820b: (accel) keeping acceleration scheme 1
[ 26.121] (**) HID 05ac:820b: (accel) acceleration profile 0
[ 26.121] (**) HID 05ac:820b: (accel) acceleration factor: 2.000
[ 26.121] (**) HID 05ac:820b: (accel) acceleration threshold: 4
[ 26.121] (II) config/udev: Adding input device HID 05ac:820b
(/dev/input/mouse1)
[ 26.121] (**) HID 05ac:820b: Applying InputClass "mouses"
[ 26.121] (II) Using input driver 'evdev' for 'HID 05ac:820b'
[ 26.121] (**) Option "SendCoreEvents" "true"
[ 26.121] (**) HID 05ac:820b: always reports core events
[ 26.121] (**) evdev: HID 05ac:820b: Device: "/dev/input/mouse1"
[ 26.121] (EE) evdev: HID 05ac:820b: Unable to query fd:
Inappropriate ioctl for device
[ 26.180] (EE) PreInit returned 2 for "HID 05ac:820b"
[ 26.180] (II) UnloadModule: "evdev"
[ 27.120] (II) evdev: HID 05ac:820b: Close
[ 27.120] (II) UnloadModule: "evdev"
[ 27.120] (II) evdev: HID 05ac:820a: Close
[ 27.120] (II) UnloadModule: "evdev"
[ 27.120] (II) UnloadModule: "synaptics"
[ 27.120] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad:
Close
[ 27.120] (II) UnloadModule: "evdev"
[ 27.120] (II) evdev: Sleep Button: Close
[ 27.120] (II) UnloadModule: "evdev"
[ 27.120] (II) evdev: Power Button: Close
[ 27.121] (II) UnloadModule: "evdev"
[ 27.121] (II) evdev: Video Bus: Close
[ 27.121] (II) UnloadModule: "evdev"
[ 27.121] (II) evdev: Power Button: Close
[ 27.121] (II) UnloadModule: "evdev"
[ 27.160] (II) NOUVEAU(0): NVLeaveVT is called.
[ 27.425] (II) NOUVEAU(0): Channel setup complete.
[ 27.427] (II) NOUVEAU(0): [COPY] async initialised.
[ 27.427] (II) NOUVEAU(0): [DRI2] Setup complete
[ 27.427] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 27.427] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 27.427] (II) Loading sub module "exa"
[ 27.427] (II) LoadModule: "exa"
[ 27.427] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 27.427] (II) Module exa: vendor="X.Org Foundation"
[ 27.427] compiled for 1.16.4, module version = 2.6.0
[ 27.427] ABI class: X.Org Video Driver, version 18.0
[ 27.427] (II) EXA(0): Driver allocated offscreen pixmaps
[ 27.427] (II) EXA(0): Driver registered support for the following
operations:
[ 27.427] (II) Solid
[ 27.427] (II) Copy
[ 27.427] (II) Composite (RENDER acceleration)
[ 27.427] (II) UploadToScreen
[ 27.427] (II) DownloadFromScreen
[ 27.427] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9
Textured Video.
[ 27.427] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 27.427] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 27.428] (--) RandR disabled
[ 27.439] (II) NOUVEAU(0): NVEnterVT is called.
[ 27.732] (II) NOUVEAU(0): Setting screen physical size to 761 x 476
[ 27.732] resize called 2880 1800
[ 27.749] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 27.749] (**) Power Button: Applying InputClass "keyboards"
[ 27.749] (II) Using input driver 'evdev' for 'Power Button'
[ 27.749] (**) Option "SendCoreEvents" "true"
[ 27.749] (**) Power Button: always reports core events
[ 27.749] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 27.749] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.749] (--) evdev: Power Button: Found keys
[ 27.749] (II) evdev: Power Button: Configuring as keyboard
[ 27.749] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 27.749] (**) Option "xkb_rules" "evdev"
[ 27.749] (**) Option "xkb_model" "evdev"
[ 27.749] (**) Option "xkb_layout" "de"
[ 27.749] (**) Option "xkb_variant" "nodeadkeys"
[ 27.761] (II) config/udev: Adding input device Video Bus
(/dev/input/event5)
[ 27.761] (**) Video Bus: Applying InputClass "keyboards"
[ 27.761] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.761] (**) Option "SendCoreEvents" "true"
[ 27.761] (**) Video Bus: always reports core events
[ 27.761] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 27.761] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27.761] (--) evdev: Video Bus: Found keys
[ 27.761] (II) evdev: Video Bus: Configuring as keyboard
[ 27.761] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5/event5"
[ 27.761] (**) Option "xkb_rules" "evdev"
[ 27.761] (**) Option "xkb_model" "evdev"
[ 27.761] (**) Option "xkb_layout" "de"
[ 27.761] (**) Option "xkb_variant" "nodeadkeys"
[ 27.762] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 27.762] (**) Power Button: Applying InputClass "keyboards"
[ 27.762] (II) Using input driver 'evdev' for 'Power Button'
[ 27.762] (**) Option "SendCoreEvents" "true"
[ 27.762] (**) Power Button: always reports core events
[ 27.762] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 27.762] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.762] (--) evdev: Power Button: Found keys
[ 27.762] (II) evdev: Power Button: Configuring as keyboard
[ 27.762] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 27.762] (**) Option "xkb_rules" "evdev"
[ 27.762] (**) Option "xkb_model" "evdev"
[ 27.762] (**) Option "xkb_layout" "de"
[ 27.762] (**) Option "xkb_variant" "nodeadkeys"
[ 27.762] (II) config/udev: Adding input device Lid Switch
(/dev/input/event0)
[ 27.762] (II) No input driver specified, ignoring this device.
[ 27.762] (II) This device may have been added with another device file.
[ 27.762] (II) config/udev: Adding input device Sleep Button
(/dev/input/event2)
[ 27.762] (**) Sleep Button: Applying InputClass "keyboards"
[ 27.762] (II) Using input driver 'evdev' for 'Sleep Button'
[ 27.762] (**) Option "SendCoreEvents" "true"
[ 27.762] (**) Sleep Button: always reports core events
[ 27.762] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 27.762] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 27.762] (--) evdev: Sleep Button: Found keys
[ 27.762] (II) evdev: Sleep Button: Configuring as keyboard
[ 27.762] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 27.762] (**) Option "xkb_rules" "evdev"
[ 27.762] (**) Option "xkb_model" "evdev"
[ 27.762] (**) Option "xkb_layout" "de"
[ 27.762] (**) Option "xkb_variant" "nodeadkeys"
[ 27.763] (II) config/udev: Adding input device Apple Inc. Apple
Internal Keyboard / Trackpad (/dev/input/event7)
[ 27.763] (**) Apple Inc. Apple Internal Keyboard / Trackpad:
Applying InputClass "keyboards"
[ 27.763] (II) Using input driver 'evdev' for 'Apple Inc. Apple
Internal Keyboard / Trackpad'
[ 27.763] (**) Option "SendCoreEvents" "true"
[ 27.763] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always
reports core events
[ 27.763] (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad:
Device: "/dev/input/event7"
[ 27.763] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad:
Vendor 0x5ac Product 0x263
[ 27.763] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad:
Found keys
[ 27.763] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad:
Configuring as keyboard
[ 27.763] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:05AC:0263.0001/input/input7/event7"
[ 27.763] (**) Option "xkb_rules" "evdev"
[ 27.763] (**) Option "xkb_model" "evdev"
[ 27.763] (**) Option "xkb_layout" "de"
[ 27.763] (**) Option "xkb_variant" "nodeadkeys"
[ 27.763] (II) config/udev: Adding input device bcm5974
(/dev/input/event4)
[ 27.763] (**) bcm5974: Applying InputClass "synaptics"
[ 27.763] (II) Using input driver 'synaptics' for 'bcm5974'
[ 27.763] (**) Option "SendCoreEvents" "true"
[ 27.763] (**) bcm5974: always reports core events
[ 27.763] (**) Option "Device" "/dev/input/event4"
[ 27.880] (II) synaptics: bcm5974: found clickpad property
[ 27.881] (--) synaptics: bcm5974: x-axis range -4750 - 5280 (res 0)
[ 27.881] (--) synaptics: bcm5974: y-axis range -150 - 6730 (res 0)
[ 27.881] (--) synaptics: bcm5974: pressure range 0 - 256
[ 27.881] (--) synaptics: bcm5974: finger width range 0 - 16
[ 27.881] (--) synaptics: bcm5974: buttons: left double triple
[ 27.881] (--) synaptics: bcm5974: Vendor 0x5ac Product 0x263
[ 27.881] (**) Option "TouchpadOff" "0"
[ 27.881] (**) Option "RTCornerButton" "2"
[ 27.881] (**) Option "RBCornerButton" "3"
[ 27.881] (**) Option "TapButton1" "1"
[ 27.881] (**) Option "TapButton2" "2"
[ 27.881] (**) Option "TapButton3" "3"
[ 27.881] (--) synaptics: bcm5974: touchpad found
[ 27.881] (**) bcm5974: always reports core events
[ 27.940] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/input/input4/event4"
[ 27.940] (**) synaptics: bcm5974: (accel) MinSpeed is now constant
deceleration 2.5
[ 27.940] (**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
[ 27.940] (**) synaptics: bcm5974: (accel) AccelFactor is now 0.016
[ 27.940] (**) Option "AccelerationScheme" "predictable"
[ 27.940] (**) bcm5974: (accel) keeping acceleration scheme 1
[ 27.940] (**) bcm5974: (accel) acceleration profile 1
[ 27.940] (**) bcm5974: (accel) acceleration factor: 2.000
[ 27.940] (**) bcm5974: (accel) acceleration threshold: 4
[ 27.941] (--) synaptics: bcm5974: touchpad found
[ 27.941] (II) config/udev: Adding input device bcm5974
(/dev/input/mouse0)
[ 27.941] (**) bcm5974: Applying InputClass "synaptics"
[ 27.941] (II) Using input driver 'synaptics' for 'bcm5974'
[ 27.941] (**) Option "SendCoreEvents" "true"
[ 27.941] (**) bcm5974: always reports core events
[ 27.941] (**) Option "Device" "/dev/input/mouse0"
[ 28.020] (EE) synaptics: bcm5974: Synaptics driver unable to detect
protocol
[ 28.020] (EE) PreInit returned 11 for "bcm5974"
[ 28.020] (II) UnloadModule: "synaptics"
[ 28.020] (II) config/udev: Adding input device HID 05ac:820a
(/dev/input/event6)
[ 28.020] (**) HID 05ac:820a: Applying InputClass "keyboards"
[ 28.020] (II) Using input driver 'evdev' for 'HID 05ac:820a'
[ 28.020] (**) Option "SendCoreEvents" "true"
[ 28.020] (**) HID 05ac:820a: always reports core events
[ 28.020] (**) evdev: HID 05ac:820a: Device: "/dev/input/event6"
[ 28.020] (--) evdev: HID 05ac:820a: Vendor 0x5ac Product 0x820a
[ 28.020] (--) evdev: HID 05ac:820a: Found keys
[ 28.020] (II) evdev: HID 05ac:820a: Configuring as keyboard
[ 28.020] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:05AC:820A.0003/input/input6/event6"
[ 28.020] (**) Option "xkb_rules" "evdev"
[ 28.020] (**) Option "xkb_model" "evdev"
[ 28.020] (**) Option "xkb_layout" "de"
[ 28.020] (**) Option "xkb_variant" "nodeadkeys"
[ 28.021] (II) config/udev: Adding input device HID 05ac:820b
(/dev/input/event8)
[ 28.021] (**) HID 05ac:820b: Applying InputClass "mouses"
[ 28.021] (**) HID 05ac:820b: Applying InputClass "Surface Pro 3
cover"
[ 28.021] (II) Using input driver 'evdev' for 'HID 05ac:820b'
[ 28.021] (**) Option "SendCoreEvents" "true"
[ 28.021] (**) HID 05ac:820b: always reports core events
[ 28.021] (**) evdev: HID 05ac:820b: Device: "/dev/input/event8"
[ 28.021] (--) evdev: HID 05ac:820b: Vendor 0x5ac Product 0x820b
[ 28.021] (**) Option "IgnoreAbsoluteAxes" "True"
[ 28.021] (--) evdev: HID 05ac:820b: Found 3 mouse buttons
[ 28.021] (--) evdev: HID 05ac:820b: Found relative axes
[ 28.021] (--) evdev: HID 05ac:820b: Found x and y relative axes
[ 28.021] (II) evdev: HID 05ac:820b: Configuring as mouse
[ 28.021] (**) evdev: HID 05ac:820b: YAxisMapping: buttons 4 and 5
[ 28.021] (**) evdev: HID 05ac:820b: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28.021] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:05AC:820B.0004/input/input8/event8"
[ 28.021] (II) evdev: HID 05ac:820b: initialized for relative axes.
[ 28.021] (**) HID 05ac:820b: (accel) keeping acceleration scheme 1
[ 28.021] (**) HID 05ac:820b: (accel) acceleration profile 0
[ 28.021] (**) HID 05ac:820b: (accel) acceleration factor: 2.000
[ 28.021] (**) HID 05ac:820b: (accel) acceleration threshold: 4
[ 28.021] (II) config/udev: Adding input device HID 05ac:820b
(/dev/input/mouse1)
[ 28.021] (**) HID 05ac:820b: Applying InputClass "mouses"
[ 28.021] (II) Using input driver 'evdev' for 'HID 05ac:820b'
[ 28.021] (**) Option "SendCoreEvents" "true"
[ 28.021] (**) HID 05ac:820b: always reports core events
[ 28.021] (**) evdev: HID 05ac:820b: Device: "/dev/input/mouse1"
[ 28.021] (EE) evdev: HID 05ac:820b: Unable to query fd:
Inappropriate ioctl for device
[ 28.100] (EE) PreInit returned 2 for "HID 05ac:820b"
[ 28.100] (II) UnloadModule: "evdev"
[ 28.803] (II) NOUVEAU(0): EDID vendor "APP", prod id 40985
[ 28.803] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 28.803] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880
2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 28.823] (II) NOUVEAU(0): EDID vendor "APP", prod id 40985
[ 28.823] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 28.823] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880
2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 28.842] (II) NOUVEAU(0): EDID vendor "APP", prod id 40985
[ 28.842] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 28.842] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880
2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 28.857] (II) NOUVEAU(0): EDID vendor "APP", prod id 40985
[ 28.857] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 28.857] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880
2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 28.882] resize called 1680 1050
[ 37.196] (II) NOUVEAU(0): EDID vendor "APP", prod id 40985
[ 37.196] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 37.196] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880
2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 37.211] (II) NOUVEAU(0): EDID vendor "APP", prod id 40985
[ 37.211] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 37.211] (II) NOUVEAU(0): Modeline "2880x1800"x0.0 337.75 2880
2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
----------------------------------------------------------------------
###X-xorgoldlog ###X-xorgstartlog
----------------------------------------------------------------------
X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.10.10-BB5000-compat-R316 i686 Gentoo
Current Operating System: Linux ThinClient 3.18.10-BB5000-mthc-R350 #3
SMP Fri Mar 27 14:16:35 CET 2015 i686
Kernel command line: BOOT_IMAGE=/src7/vmbbmthc root=8:23
uuid=d93e2344-84f1-4944-a59c-a8d1a77f1632 confdev=/dev/sdb8 panic=10
certdev=/dev/sdb3 bootlang=de_DE console=tty1 x11prop=0 x11vesa=
loglevel=1 splash=silent hwtest=1 AUTOSAVETEST=1 conftype=auto
Build Date: 12 March 2015 08:57:33PM
Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 1 17:30:52 2015
(++) Using config file: "/var/syscfg/etc/X11/XF86Config"
resize called 2880 1800
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but
<RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
resize called 2880 1800
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but
<RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
resize called 1680 1050
----------------------------------------------------------------------
###X-xrandr
----------------------------------------------------------------------
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
eDP-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis)
331mm x 207mm
2880x1800 59.99 +
1920x1200 59.88
1920x1080 59.96
1600x1200 59.87
1680x1050 59.95*
1400x1050 59.98
1280x1024 59.89
1280x960 59.94
1152x864 59.96
1024x768 59.92
800x600 59.86
640x480 59.38
720x400 59.55
640x400 59.95
640x350 59.77
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
----------------------------------------------------------------------
###X-xrandr_current
----------------------------------------------------------------------
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
eDP-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis)
331mm x 207mm
2880x1800 59.99 +
1920x1200 59.88
1920x1080 59.96
1600x1200 59.87
1680x1050 59.95*
1400x1050 59.98
1280x1024 59.89
1280x960 59.94
1152x864 59.96
1024x768 59.92
800x600 59.86
640x480 59.38
720x400 59.55
640x400 59.95
640x350 59.77
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
----------------------------------------------------------------------
###X-xrandr_verbose
----------------------------------------------------------------------
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
eDP-1 connected 1680x1050+0+0 (0x6c) normal (normal left inverted right
x axis y axis) 331mm x 207mm
Identifier: 0x63
Timestamp: 29114
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff00061019a000000000
30160104a5211578026fb1a7554c9e25
0c505400000001010101010101010101
010101010101ef8340a0b00834703020
36004bcf1000001a000000fc00436f6c
6f72204c43440a202020000000100000
00000000000000000000000000000010
000000000000000000000000000000bc
dithering depth: auto
supported: auto, 6 bpc, 8 bpc
dithering mode: auto
supported: auto, off, static 2x2, dynamic 2x2, temporal
scaling mode: Full
supported: None, Full, Center, Full aspect
color vibrance: 150
range: (0, 200)
vibrant hue: 90
range: (0, 180)
2880x1800 (0x68) 337.750MHz +HSync -VSync +preferred
h: width 2880 start 2928 end 2960 total 3040 skew 0 clock
111.10KHz
v: height 1800 start 1803 end 1809 total 1852 clock 59.99Hz
1920x1200 (0x69) 193.250MHz -HSync +VSync
h: width 1920 start 2056 end 2256 total 2592 skew 0 clock
74.56KHz
v: height 1200 start 1203 end 1209 total 1245 clock 59.88Hz
1920x1080 (0x6a) 173.000MHz -HSync +VSync
h: width 1920 start 2048 end 2248 total 2576 skew 0 clock
67.16KHz
v: height 1080 start 1083 end 1088 total 1120 clock 59.96Hz
1600x1200 (0x6b) 161.000MHz -HSync +VSync
h: width 1600 start 1712 end 1880 total 2160 skew 0 clock
74.54KHz
v: height 1200 start 1203 end 1207 total 1245 clock 59.87Hz
1680x1050 (0x6c) 146.250MHz -HSync +VSync *current
h: width 1680 start 1784 end 1960 total 2240 skew 0 clock
65.29KHz
v: height 1050 start 1053 end 1059 total 1089 clock 59.95Hz
1400x1050 (0x6d) 121.750MHz -HSync +VSync
h: width 1400 start 1488 end 1632 total 1864 skew 0 clock
65.32KHz
v: height 1050 start 1053 end 1057 total 1089 clock 59.98Hz
1280x1024 (0x6e) 109.000MHz -HSync +VSync
h: width 1280 start 1368 end 1496 total 1712 skew 0 clock
63.67KHz
v: height 1024 start 1027 end 1034 total 1063 clock 59.89Hz
1280x960 (0x6f) 101.250MHz -HSync +VSync
h: width 1280 start 1360 end 1488 total 1696 skew 0 clock
59.70KHz
v: height 960 start 963 end 967 total 996 clock 59.94Hz
1152x864 (0x70) 81.750MHz -HSync +VSync
h: width 1152 start 1216 end 1336 total 1520 skew 0 clock
53.78KHz
v: height 864 start 867 end 871 total 897 clock 59.96Hz
1024x768 (0x71) 63.500MHz -HSync +VSync
h: width 1024 start 1072 end 1176 total 1328 skew 0 clock
47.82KHz
v: height 768 start 771 end 775 total 798 clock 59.92Hz
800x600 (0x72) 38.250MHz -HSync +VSync
h: width 800 start 832 end 912 total 1024 skew 0 clock
37.35KHz
v: height 600 start 603 end 607 total 624 clock 59.86Hz
640x480 (0x73) 23.750MHz -HSync +VSync
h: width 640 start 664 end 720 total 800 skew 0 clock
29.69KHz
v: height 480 start 483 end 487 total 500 clock 59.38Hz
720x400 (0x74) 22.250MHz -HSync +VSync
h: width 720 start 744 end 808 total 896 skew 0 clock
24.83KHz
v: height 400 start 403 end 413 total 417 clock 59.55Hz
640x400 (0x75) 20.000MHz -HSync +VSync
h: width 640 start 664 end 720 total 800 skew 0 clock
25.00KHz
v: height 400 start 403 end 409 total 417 clock 59.95Hz
640x350 (0x76) 17.500MHz -HSync +VSync
h: width 640 start 664 end 720 total 800 skew 0 clock
21.88KHz
v: height 350 start 353 end 363 total 366 clock 59.77Hz
DP-1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x64
Timestamp: 29114
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
dithering depth: auto
supported: auto, 6 bpc, 8 bpc
dithering mode: auto
supported: auto, off, static 2x2, dynamic 2x2, temporal
scaling mode: Full
supported: None, Full, Center, Full aspect
color vibrance: 150
range: (0, 200)
vibrant hue: 90
range: (0, 180)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: auto, off, on
DP-2 disconnected (normal left inverted right x axis y axis)
Identifier: 0x65
Timestamp: 29114
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
dithering depth: auto
supported: auto, 6 bpc, 8 bpc
dithering mode: auto
supported: auto, off, static 2x2, dynamic 2x2, temporal
scaling mode: Full
supported: None, Full, Center, Full aspect
color vibrance: 150
range: (0, 200)
vibrant hue: 90
range: (0, 180)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: auto, off, on
HDMI-1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x66
Timestamp: 29114
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
dithering depth: auto
supported: auto, 6 bpc, 8 bpc
dithering mode: auto
supported: auto, off, static 2x2, dynamic 2x2, temporal
scaling mode: Full
supported: None, Full, Center, Full aspect
color vibrance: 150
range: (0, 200)
vibrant hue: 90
range: (0, 180)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: auto, off, on
----------------------------------------------------------------------
###X-xrandr_version
----------------------------------------------------------------------
xrandr program version 1.4.3
Server reports RandR version 1.4
###PCI-lspci
----------------------------------------------------------------------
Device: 00:00.0
Class: Host bridge
Vendor: Intel Corporation
Device: Crystal Well DRAM Controller
SVendor: Apple Inc.
SDevice: Device 012f
Rev: 08
Device: 00:01.0
Class: PCI bridge
Vendor: Intel Corporation
Device: Crystal Well PCI Express x16 Controller
Rev: 08
Device: 00:01.1
Class: PCI bridge
Vendor: Intel Corporation
Device: Crystal Well PCI Express x8 Controller
Rev: 08
Device: 00:14.0
Class: USB controller
Vendor: Intel Corporation
Device: 8 Series/C220 Series Chipset Family USB xHCI
SVendor: Intel Corporation
SDevice: Device 7270
Rev: 05
ProgIf: 30
Device: 00:16.0
Class: Communication controller
Vendor: Intel Corporation
Device: 8 Series/C220 Series Chipset Family MEI Controller #1
SVendor: Intel Corporation
SDevice: Device 7270
Rev: 04
Device: 00:1b.0
Class: Audio device
Vendor: Intel Corporation
Device: 8 Series/C220 Series Chipset High Definition Audio Controller
SVendor: Intel Corporation
SDevice: Device 7270
Rev: 05
Device: 00:1c.0
Class: PCI bridge
Vendor: Intel Corporation
Device: 8 Series/C220 Series Chipset Family PCI Express Root Port #1
Rev: d5
Device: 00:1c.2
Class: PCI bridge
Vendor: Intel Corporation
Device: 8 Series/C220 Series Chipset Family PCI Express Root Port #3
Rev: d5
Device: 00:1c.3
Class: PCI bridge
Vendor: Intel Corporation
Device: 8 Series/C220 Series Chipset Family PCI Express Root Port #4
Rev: d5
Device: 00:1c.4
Class: PCI bridge
Vendor: Intel Corporation
Device: 8 Series/C220 Series Chipset Family PCI Express Root Port #5
Rev: d5
Device: 00:1f.0
Class: ISA bridge
Vendor: Intel Corporation
Device: HM87 Express LPC Controller
SVendor: Intel Corporation
SDevice: Device 7270
Rev: 05
Device: 00:1f.3
Class: SMBus
Vendor: Intel Corporation
Device: 8 Series/C220 Series Chipset Family SMBus Controller
SVendor: Intel Corporation
SDevice: Device 7270
Rev: 05
Device: 01:00.0
Class: VGA compatible controller
Vendor: NVIDIA Corporation
Device: GK107M [GeForce GT 750M Mac Edition]
SVendor: Apple Inc.
SDevice: Device 0130
Rev: a1
Device: 01:00.1
Class: Audio device
Vendor: NVIDIA Corporation
Device: GK107 HDMI Audio Controller
SVendor: Apple Inc.
SDevice: Device 0130
Rev: a1
Device: 03:00.0
Class: Network controller
Vendor: Broadcom Corporation
Device: BCM4360 802.11ac Wireless Network Adapter
SVendor: Apple Inc.
SDevice: Device 0134
Rev: 03
Device: 04:00.0
Class: Multimedia controller
Vendor: Broadcom Corporation
Device: Device 1570
SVendor: Broadcom Corporation
SDevice: Device 1570
Device: 05:00.0
Class: SATA controller
Vendor: Samsung Electronics Co Ltd
Device: Apple PCIe SSD
Rev: 01
ProgIf: 01
Device: 06:00.0
Class: PCI bridge
Vendor: Intel Corporation
Device: Device 156d
Device: 07:00.0
Class: PCI bridge
Vendor: Intel Corporation
Device: Device 156d
Device: 07:03.0
Class: PCI bridge
Vendor: Intel Corporation
Device: Device 156d
Device: 07:04.0
Class: PCI bridge
Vendor: Intel Corporation
Device: Device 156d
Device: 07:05.0
Class: PCI bridge
Vendor: Intel Corporation
Device: Device 156d
Device: 07:06.0
Class: PCI bridge
Vendor: Intel Corporation
Device: Device 156d
Device: 08:00.0
Class: System peripheral
Vendor: Intel Corporation
Device: Device 156c
SVendor: Unknown vendor 2222
SDevice: Device 1111
PhySlot: 0
----------------------------------------------------------------------
###PCI-lspcin
----------------------------------------------------------------------
00:00.0 0600: 8086:0d04 (rev 08)
00:01.0 0604: 8086:0d01 (rev 08)
00:01.1 0604: 8086:0d05 (rev 08)
00:14.0 0c03: 8086:8c31 (rev 05)
00:16.0 0780: 8086:8c3a (rev 04)
00:1b.0 0403: 8086:8c20 (rev 05)
00:1c.0 0604: 8086:8c10 (rev d5)
00:1c.2 0604: 8086:8c14 (rev d5)
00:1c.3 0604: 8086:8c16 (rev d5)
00:1c.4 0604: 8086:8c18 (rev d5)
00:1f.0 0601: 8086:8c4b (rev 05)
00:1f.3 0c05: 8086:8c22 (rev 05)
01:00.0 0300: 10de:0fe9 (rev a1)
01:00.1 0403: 10de:0e1b (rev a1)
03:00.0 0280: 14e4:43a0 (rev 03)
04:00.0 0480: 14e4:1570
05:00.0 0106: 144d:1600 (rev 01)
06:00.0 0604: 8086:156d
07:00.0 0604: 8086:156d
07:03.0 0604: 8086:156d
07:04.0 0604: 8086:156d
07:05.0 0604: 8086:156d
07:06.0 0604: 8086:156d
08:00.0 0880: 8086:156c
----------------------------------------------------------------------
###PCI-lspcinv
----------------------------------------------------------------------
Device: 00:00.0
Class: 0600
Vendor: 8086
Device: 0d04
SVendor: 106b
SDevice: 012f
Rev: 08
Device: 00:01.0
Class: 0604
Vendor: 8086
Device: 0d01
Rev: 08
Device: 00:01.1
Class: 0604
Vendor: 8086
Device: 0d05
Rev: 08
Device: 00:14.0
Class: 0c03
Vendor: 8086
Device: 8c31
SVendor: 8086
SDevice: 7270
Rev: 05
ProgIf: 30
Device: 00:16.0
Class: 0780
Vendor: 8086
Device: 8c3a
SVendor: 8086
SDevice: 7270
Rev: 04
Device: 00:1b.0
Class: 0403
Vendor: 8086
Device: 8c20
SVendor: 8086
SDevice: 7270
Rev: 05
Device: 00:1c.0
Class: 0604
Vendor: 8086
Device: 8c10
Rev: d5
Device: 00:1c.2
Class: 0604
Vendor: 8086
Device: 8c14
Rev: d5
Device: 00:1c.3
Class: 0604
Vendor: 8086
Device: 8c16
Rev: d5
Device: 00:1c.4
Class: 0604
Vendor: 8086
Device: 8c18
Rev: d5
Device: 00:1f.0
Class: 0601
Vendor: 8086
Device: 8c4b
SVendor: 8086
SDevice: 7270
Rev: 05
Device: 00:1f.3
Class: 0c05
Vendor: 8086
Device: 8c22
SVendor: 8086
SDevice: 7270
Rev: 05
Device: 01:00.0
Class: 0300
Vendor: 10de
Device: 0fe9
SVendor: 106b
SDevice: 0130
Rev: a1
Device: 01:00.1
Class: 0403
Vendor: 10de
Device: 0e1b
SVendor: 106b
SDevice: 0130
Rev: a1
Device: 03:00.0
Class: 0280
Vendor: 14e4
Device: 43a0
SVendor: 106b
SDevice: 0134
Rev: 03
Device: 04:00.0
Class: 0480
Vendor: 14e4
Device: 1570
SVendor: 14e4
SDevice: 1570
Device: 05:00.0
Class: 0106
Vendor: 144d
Device: 1600
Rev: 01
ProgIf: 01
Device: 06:00.0
Class: 0604
Vendor: 8086
Device: 156d
Device: 07:00.0
Class: 0604
Vendor: 8086
Device: 156d
Device: 07:03.0
Class: 0604
Vendor: 8086
Device: 156d
Device: 07:04.0
Class: 0604
Vendor: 8086
Device: 156d
Device: 07:05.0
Class: 0604
Vendor: 8086
Device: 156d
Device: 07:06.0
Class: 0604
Vendor: 8086
Device: 156d
Device: 08:00.0
Class: 0880
Vendor: 8086
Device: 156c
SVendor: 2222
SDevice: 1111
PhySlot: 0
----------------------------------------------------------------------
###PCI-xcfg
----------------------------------------------------------------------
Section "Device"
Identifier "Device 1"
VendorName "Unknown"
BoardName "Unknown"
Driver "nouveau"
Option "NoAccel" "False"
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
#!START_X=yes
#!START_VNC=no
#!OPT_SOFTWARE_CURSOR="no"
#mobile = '1'
#laptopmode
#!PROP_MODE="0"
#!PROP_MODE="0"
#!DRV_OPTIONS="NoAccel,False"
#!AUTOHIDE=""
#
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Disable "glx"
SubSection "extmod"
----------------------------------------------------------------------
###Syslog-bootlog
----------------------------------------------------------------------
ACPI: MCFG 0x7AD89000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: DMAR 0x7AD5F000 000088 (v01 APPLE HSW 00000001 AAPL 00000001)
ACPI: Local APIC address 0xfee00000
1080MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
BRK [0x017db000, 0x017dbfff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x377fdfff]
HighMem [mem 0x377fe000-0x7affffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00057fff]
node 0: [mem 0x00059000-0x0008efff]
node 0: [mem 0x00090000-0x0009ffff]
node 0: [mem 0x00100000-0x7ad13fff]
node 0: [mem 0x7ad53000-0x7ad5efff]
node 0: [mem 0x7ad8f000-0x7ae38fff]
node 0: [mem 0x7ae8f000-0x7aecffff]
node 0: [mem 0x7aeff000-0x7af7afff]
node 0: [mem 0x7afe5000-0x7affffff]
Initmem setup node 0 [mem 0x00001000-0x7affffff]
On node 0 totalpages: 503359
free_area_init_node: node 0, pgdat c16fbf00, node_mem_map f67a9020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3997 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 223230 pages, LIFO batch:31
HighMem zone: 2161 pages used for memmap
HighMem zone: 276132 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
e820: [mem 0x7fa00000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
efi: Setup done, disabling due to 32/64-bit mismatch
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f672d000 s26624 r0 d30720 u57344
pcpu-alloc: s26624 r0 d30720 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 501583
Kernel command line: BOOT_IMAGE=/src7/vmbbmthc root=8:23
uuid=d93e2344-84f1-4944-a59c-a8d1a77f1632 confdev=/dev/sdb8 panic=10
certdev=/dev/sdb3 bootlang=de_DE console=tty1 x11prop=0 x11vesa=
loglevel=1 splash=silent hwtest=1 AUTOSAVETEST=1 conftype=auto
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Initializing HighMem for node 0 (000377fe:0007b000)
Initializing Movable for node 0 (00000000:00000000)
Memory: 1709256K/2013436K available (4858K kernel code, 362K rwdata,
1960K rodata, 488K init, 308K bss, 304180K reserved, 826512K highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1706000 - 0xc1780000 ( 488 kB)
.data : 0xc14bee06 - 0xc1704a40 (2327 kB)
.text : 0xc1000000 - 0xc14bee06 (4859 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:488 0
CPU 0 irqstacks, hard=f6008000 soft=f600a000
Console: colour dummy device 80x25
console [tty1] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.851 MHz processor
Calibrating delay loop (skipped), value calculated using timer
frequency.. 4589.70 BogoMIPS (lpj=22948510)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 20K (c1780000 - c1785000)
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz (fam: 06,
model: 46, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width
counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f60e0000 soft=f60e2000
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
CPU 2 irqstacks, hard=f60f4000 soft=f60f6000
#2
Initializing CPU#2
CPU 3 irqstacks, hard=f6108000 soft=f610a000
#3
Initializing CPU#3
CPU 4 irqstacks, hard=f611c000 soft=f611e000
#4
Initializing CPU#4
CPU 5 irqstacks, hard=f614e000 soft=f6150000
#5
Initializing CPU#5
CPU 6 irqstacks, hard=f6162000 soft=f6164000
#6
Initializing CPU#6
CPU 7 irqstacks, hard=f6176000 soft=f6178000
#7
Initializing CPU#7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (36717.61 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7ad14000-0x7ad52fff] (258048 bytes)
xor: automatically using best checksumming function:
avx : 29015.200 MB/sec
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem 0xe0000000-0xe9cfffff]
(base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
raid6: mmxx1 6181 MB/s
raid6: mmxx2 6480 MB/s
raid6: sse1x1 5267 MB/s
raid6: sse1x2 6484 MB/s
raid6: sse2x1 10633 MB/s
raid6: sse2x2 13105 MB/s
raid6: avx2x1 20848 MB/s
raid6: avx2x2 23656 MB/s
raid6: using algorithm avx2x2 (23656 MB/s)
raid6: using avx2x1 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF5926800 0004F0 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF5926000 00067C (v01 PmRef ApIst 00003000 INTL 20100915)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xF5947E00 000119 (v01 PmRef ApCst 00003000 INTL 20100915)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
(20140926/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
(20140926/hwxface-580)
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem 0xe0000000-0xe9cfffff]
(base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe9cfffff] reserved in ACPI
motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs"
and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug
AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9c]
only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x7fa00000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0d04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0d01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0d05] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc1e00000-0xc1e0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc1e19100-0xc1e1910f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc1e14000-0xc1e17fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc1e19000-0xc1e190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:0fe9] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x1000-0x107f]
pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
pci 0000:06:00.0: [8086:156d] type 01 class 0x060400
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 06-9c]
pci 0000:00:01.1: bridge window [io 0x3000-0x5fff]
pci 0000:00:01.1: bridge window [mem 0xc1f00000-0xcdffffff]
pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
pci 0000:07:00.0: [8086:156d] type 01 class 0x060400
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:03.0: [8086:156d] type 01 class 0x060400
pci 0000:07:03.0: supports D1 D2
pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:04.0: [8086:156d] type 01 class 0x060400
pci 0000:07:04.0: supports D1 D2
pci 0000:07:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:05.0: [8086:156d] type 01 class 0x060400
pci 0000:07:05.0: supports D1 D2
pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:06.0: [8086:156d] type 01 class 0x060400
pci 0000:07:06.0: supports D1 D2
pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-6c]
pci 0000:06:00.0: bridge window [io 0x3000-0x4fff]
pci 0000:06:00.0: bridge window [mem 0xc1f00000-0xc9ffffff]
pci 0000:06:00.0: bridge window [mem 0xce000000-0xd5ffffff 64bit pref]
pci 0000:08:00.0: [8086:156c] type 00 class 0x088000
pci 0000:08:00.0: reg 0x10: [mem 0xc1f00000-0xc1f3ffff]
pci 0000:08:00.0: reg 0x14: [mem 0xc1f40000-0xc1f40fff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PCI bridge to [bus 08]
pci 0000:07:00.0: bridge window [mem 0xc1f00000-0xc1ffffff]
pci 0000:07:03.0: PCI bridge to [bus 09-39]
pci 0000:07:03.0: bridge window [io 0x3000-0x3fff]
pci 0000:07:03.0: bridge window [mem 0xc2000000-0xc5ffffff]
pci 0000:07:03.0: bridge window [mem 0xce000000-0xd1ffffff 64bit pref]
pci 0000:07:04.0: PCI bridge to [bus 3a]
pci 0000:07:05.0: PCI bridge to [bus 3b-6b]
pci 0000:07:05.0: bridge window [io 0x4000-0x4fff]
pci 0000:07:05.0: bridge window [mem 0xc6000000-0xc9ffffff]
pci 0000:07:05.0: bridge window [mem 0xd2000000-0xd5ffffff 64bit pref]
pci 0000:07:06.0: PCI bridge to [bus 6c]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [14e4:43a0] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xc1a00000-0xc1a07fff 64bit]
pci 0000:03:00.0: reg 0x18: [mem 0xc1800000-0xc19fffff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xc1800000-0xc1afffff]
pci 0000:04:00.0: [14e4:1570] type 00 class 0x048000
pci 0000:04:00.0: reg 0x10: [mem 0xc1d00000-0xc1d0ffff 64bit]
pci 0000:04:00.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xc1c00000-0xc1cfffff 64bit]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0 D3hot
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [mem 0xc1c00000-0xc1dfffff]
pci 0000:00:1c.3: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:05:00.0: [144d:1600] type 00 class 0x010601
pci 0000:05:00.0: reg 0x24: [mem 0xc1b00000-0xc1b01fff]
pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xc1b00000-0xc1bfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<giometti at linux.it>
PTP clock support registered
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x7ad14000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7ad5f000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7ae39000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7aed0000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7af7b000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
NET: Registered protocol family 8
NET: Registered protocol family 20
Switched to clocksource hpet
FS-Cache: Loaded
pnp: PnP ACPI init
system 00:00: [mem 0xfed00000-0xfed03fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs APP000b (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
system 00:05: [mem 0x40000000-0x401fffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
pci 0000:05:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no
compatible bridge window
pci 0000:07:00.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size
1000
pci 0000:07:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref]
to [bus 08] add_size 200000
pci 0000:07:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a] add_size
1000
pci 0000:07:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref]
to [bus 3a] add_size 200000
pci 0000:07:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 3a]
add_size 200000
pci 0000:07:06.0: bridge window [io 0x1000-0x0fff] to [bus 6c] add_size
1000
pci 0000:07:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref]
to [bus 6c] add_size 200000
pci 0000:07:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 6c]
add_size 200000
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size
1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref]
to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02]
add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size
add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: assigned [mem 0x7fa00000-0x7fbfffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0x7fc00000-0x7fdfffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
pci 0000:07:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
pci 0000:07:04.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size
add_size 200000
pci 0000:07:04.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
pci 0000:07:06.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size
add_size 200000
pci 0000:07:06.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
pci 0000:07:00.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:07:04.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:07:06.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:07:00.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:07:00.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:07:04.0: BAR 8: no space for [mem size 0x00200000]
pci 0000:07:04.0: BAR 8: failed to assign [mem size 0x00200000]
pci 0000:07:04.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:07:04.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:07:06.0: BAR 8: no space for [mem size 0x00200000]
pci 0000:07:06.0: BAR 8: failed to assign [mem size 0x00200000]
pci 0000:07:06.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:07:06.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:07:00.0: BAR 7: no space for [io size 0x1000]
pci 0000:07:00.0: BAR 7: failed to assign [io size 0x1000]
pci 0000:07:04.0: BAR 7: no space for [io size 0x1000]
pci 0000:07:04.0: BAR 7: failed to assign [io size 0x1000]
pci 0000:07:06.0: BAR 7: no space for [io size 0x1000]
pci 0000:07:06.0: BAR 7: failed to assign [io size 0x1000]
pci 0000:07:06.0: BAR 8: no space for [mem size 0x00200000]
pci 0000:07:06.0: BAR 8: failed to assign [mem size 0x00200000]
pci 0000:07:06.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:07:06.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:07:06.0: BAR 7: no space for [io size 0x1000]
pci 0000:07:06.0: BAR 7: failed to assign [io size 0x1000]
pci 0000:07:04.0: BAR 8: no space for [mem size 0x00200000]
pci 0000:07:04.0: BAR 8: failed to assign [mem size 0x00200000]
pci 0000:07:04.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:07:04.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:07:04.0: BAR 7: no space for [io size 0x1000]
pci 0000:07:04.0: BAR 7: failed to assign [io size 0x1000]
pci 0000:07:00.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
pci 0000:07:00.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:07:00.0: BAR 7: no space for [io size 0x1000]
pci 0000:07:00.0: BAR 7: failed to assign [io size 0x1000]
pci 0000:07:00.0: PCI bridge to [bus 08]
pci 0000:07:00.0: bridge window [mem 0xc1f00000-0xc1ffffff]
pci 0000:07:03.0: PCI bridge to [bus 09-39]
pci 0000:07:03.0: bridge window [io 0x3000-0x3fff]
pci 0000:07:03.0: bridge window [mem 0xc2000000-0xc5ffffff]
pci 0000:07:03.0: bridge window [mem 0xce000000-0xd1ffffff 64bit pref]
pci 0000:07:04.0: PCI bridge to [bus 3a]
pci 0000:07:05.0: PCI bridge to [bus 3b-6b]
pci 0000:07:05.0: bridge window [io 0x4000-0x4fff]
pci 0000:07:05.0: bridge window [mem 0xc6000000-0xc9ffffff]
pci 0000:07:05.0: bridge window [mem 0xd2000000-0xd5ffffff 64bit pref]
pci 0000:07:06.0: PCI bridge to [bus 6c]
pci 0000:06:00.0: PCI bridge to [bus 07-6c]
pci 0000:06:00.0: bridge window [io 0x3000-0x4fff]
pci 0000:06:00.0: bridge window [mem 0xc1f00000-0xc9ffffff]
pci 0000:06:00.0: bridge window [mem 0xce000000-0xd5ffffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 06-9c]
pci 0000:00:01.1: bridge window [io 0x3000-0x5fff]
pci 0000:00:01.1: bridge window [mem 0xc1f00000-0xcdffffff]
pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0x7fa00000-0x7fbfffff]
pci 0000:00:1c.0: bridge window [mem 0x7fc00000-0x7fdfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xc1800000-0xc1afffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [mem 0xc1c00000-0xc1dfffff]
pci 0000:00:1c.3: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xc1b10000-0xc1b1ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xc1b00000-0xc1bfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 20 [mem 0x7fa00000-0xfeafffff]
pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc10fffff]
pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x3000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xc1f00000-0xcdffffff]
pci_bus 0000:06: resource 2 [mem 0xce000000-0xd9ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x3000-0x4fff]
pci_bus 0000:07: resource 1 [mem 0xc1f00000-0xc9ffffff]
pci_bus 0000:07: resource 2 [mem 0xce000000-0xd5ffffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xc1f00000-0xc1ffffff]
pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:09: resource 1 [mem 0xc2000000-0xc5ffffff]
pci_bus 0000:09: resource 2 [mem 0xce000000-0xd1ffffff 64bit pref]
pci_bus 0000:3b: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:3b: resource 1 [mem 0xc6000000-0xc9ffffff]
pci_bus 0000:3b: resource 2 [mem 0xd2000000-0xd5ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x7fa00000-0x7fbfffff]
pci_bus 0000:02: resource 2 [mem 0x7fc00000-0x7fdfffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xc1800000-0xc1afffff]
pci_bus 0000:04: resource 1 [mem 0xc1c00000-0xc1dfffff]
pci_bus 0000:04: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xc1b00000-0xc1bfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 980K (f7709000 - f77fe000)
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Key type cifs.spnego registered
Key type cifs.idmap registered
ntfs: driver 2.1.31 [Flags: R/O].
fuse init (API version 7.23)
msgmni has been set to 1726
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:01.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pcieport 0000:00:1c.0: irq 26 for MSI/MSI-X
pcieport 0000:06:00.0: irq 27 for MSI/MSI-X
pcieport 0000:07:00.0: irq 28 for MSI/MSI-X
pcieport 0000:07:03.0: enabling device (0000 -> 0003)
pcieport 0000:07:03.0: irq 29 for MSI/MSI-X
pcieport 0000:07:04.0: irq 30 for MSI/MSI-X
pcieport 0000:07:05.0: enabling device (0000 -> 0003)
pcieport 0000:07:05.0: irq 31 for MSI/MSI-X
pcieport 0000:07:06.0: irq 32 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: Using ACPI for slot detection.
pciehp 0000:07:00.0:pcie24: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl-
MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:07:00.0:pcie24: service driver pciehp loaded
pciehp 0000:07:03.0:pcie24: Slot #3 AttnBtn- AttnInd- PwrInd- PwrCtrl-
MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:07:03.0:pcie24: service driver pciehp loaded
pciehp 0000:07:04.0:pcie24: Slot #4 AttnBtn- AttnInd- PwrInd- PwrCtrl-
MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:07:04.0:pcie24: service driver pciehp loaded
pciehp 0000:07:05.0:pcie24: Slot #5 AttnBtn- AttnInd- PwrInd- PwrCtrl-
MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:07:05.0:pcie24: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x80020000, mapped to 0xf8080000, using 6400k,
total 6400k
efifb: mode is 1280x800x32, linelength=8192, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x50
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x46
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: Deprecated procfs I/F for AC is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
lp: driver loaded but no devices found
brd: module loaded
loop: module loaded
HP CISS Driver (v 3.6.26)
mtip32xx Version 1.3.1
nullb0: unknown partition table
nullb1: unknown partition table
null: module loaded
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
megasas: 06.805.06.00-rc1 Thu. Sep. 4 17:00:00 PDT 2014
mpt2sas version 18.100.00.00 loaded
mpt3sas version 04.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012)
esas2r: driver will not be loaded because no ATTO esas2r devices were found
VMware PVSCSI driver - version 1.0.5.0-k
hv_vmbus: registering driver hv_storvsc
ahci 0000:05:00.0: version 3.0
ahci 0000:05:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq led clo only pio ccc
scsi host0: ahci
ata1: SATA max UDMA/133 abar m8192 at 0xc1b00000 port 0xc1b00100 irq 16
scsi host1: pata_legacy
ata2: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: APPLE SSD SM0512F, UXM2JA1Q, max UDMA/133
ata1.00: 977105060 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM0512 JA1Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 977105060 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi host2: pata_legacy
ata3: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
Solarflare NET driver v4.0
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
xhci_hcd 0000:00:14.0: irq 33 for MSI/MSI-X
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver uss720
uss720: v0.6:USB Parport Cable driver for Cables using the Lucent
Technologies USS720 Chip
uss720: NOTE: this is a special purpose driver to allow nonstandard
uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
uss720: If you just want to connect to a printer, use usblp instead
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 2294.687 MHz
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
Intel P-state driver initializing.
hv_vmbus: registering driver hv_balloon
GACT probability on
Mirror/redirect action on
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ipip: IPv4 over IPv4 tunneling driver
IPv4 over IPsec tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
l2tp_core: L2TP core driver, V2.0
l2tp_ppp: PPPoL2TP kernel driver, V2.0
l2tp_ip: L2TP IP encapsulation support (L2TPv3)
l2tp_netlink: L2TP netlink interface
l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'ECOS Technology GmbH: code-sign:
39902a39d84cec4e9d12ee1c71d865f0e25906e3'
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: gzip image found at block 0
VFS: Mounted root (ext2 filesystem) on device 1:0.
random: linuxrc urandom read with 0 bits of entropy available
usb 1-5: new high-speed USB device number 2 using xhci_hcd
usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
usb-storage 2-4:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-4:1.0
usb 1-5: ep 0x81 - rounding interval to 128 microframes, ep desc says
255 microframes
usb 1-5: ep 0x2 - rounding interval to 128 microframes, ep desc says 255
microframes
usb-storage 1-5:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-5:1.0
usb 1-8: new full-speed USB device number 3 using xhci_hcd
Switched to clocksource tsc
usb 1-8: ep 0x81 - rounding interval to 1024 microframes, ep desc says
2040 microframes
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 3 ports detected
usb 1-12: new full-speed USB device number 4 using xhci_hcd
usb 1-8.1: new full-speed USB device number 5 using xhci_hcd
usb 1-8.1: ep 0x81 - rounding interval to 64 microframes, ep desc says
80 microframes
usb 1-8.2: new full-speed USB device number 6 using xhci_hcd
usb 1-8.2: ep 0x81 - rounding interval to 64 microframes, ep desc says
80 microframes
usb 1-8.3: new full-speed USB device number 7 using xhci_hcd
scsi 3:0:0:0: Direct-Access APPLE SD Card Reader 3.00 PQ: 0 ANSI: 6
sd 3:0:0:0: [sdb] Attached SCSI removable disk
scsi 4:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 4
sd 4:0:0:0: [sdc] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sdc] No Caching mode page found
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 >
sd 4:0:0:0: [sdc] Attached SCSI removable disk
VFS: Mounted root (squashfs filesystem) readonly on device 8:39.
Trying to move old root to /initrd ... /initrd does not exist. Ignored.
Unmounting old root
Trying to free ramdisk memory ... failed
Freeing unused kernel memory: 488K (c1706000 - c1780000)
Write protecting the kernel text: 4860k
Write protecting the kernel read-only data: 1964k
----------------------------------------------------------------------
###Syslog-lsmod
----------------------------------------------------------------------
Module Size Used by
speedstep_lib 2410 0
snd_hda_codec_hdmi 28067 1
wl 6068401 0
nouveau 829193 2
snd_hda_codec_cirrus 6827 1
snd_hda_codec_generic 33026 1 snd_hda_codec_cirrus
mxm_wmi 1039 1 nouveau
wmi 5743 2 mxm_wmi,nouveau
ttm 40601 1 nouveau
coretemp 4056 0
drm_kms_helper 51297 1 nouveau
snd_hda_intel 14592 0
x86_pkg_temp_thermal 3516 0
snd_hda_controller 12752 1 snd_hda_intel
drm 170569 5 ttm,drm_kms_helper,nouveau
joydev 6676 0
hid_generic 673 0
hid_apple 3780 0
snd_hda_codec 55914 5
snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller,snd_hda_codec_cirrus
snd_pcm 53803 4
snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
video 10469 1 nouveau
crc32_pclmul 2077 0
snd_timer 12234 1 snd_pcm
usbhid 19428 0
bcm5974 6506 0
hwmon 1990 2 coretemp,nouveau
cfg80211 142719 1 wl
snd 35530 7
snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_hda_codec_cirrus
agpgart 17903 2 drm,ttm
soundcore 3246 2 snd,snd_hda_codec
apple_bl 1980 0
###Syslog-syslog
----------------------------------------------------------------------
Apr 1 17:30:35 Ecos-Appliance syslogd 1.5.1: restart.
Apr 1 17:30:35 Ecos-Appliance kernel: klogd 1.5.1, log source =
/proc/kmsg started.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: MCFG 0x7AD89000 00003C (v01
APPLE Apple00 00000001 Loki 0000005F)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: DMAR 0x7AD5F000 000088 (v01
APPLE HSW 00000001 AAPL 00000001)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Local APIC address 0xfee00000
Apr 1 17:30:35 Ecos-Appliance kernel: 1080MB HIGHMEM available.
Apr 1 17:30:35 Ecos-Appliance kernel: 887MB LOWMEM available.
Apr 1 17:30:35 Ecos-Appliance kernel: mapped low ram: 0 - 377fe000
Apr 1 17:30:35 Ecos-Appliance kernel: low ram: 0 - 377fe000
Apr 1 17:30:35 Ecos-Appliance kernel: BRK [0x017db000, 0x017dbfff] PGTABLE
Apr 1 17:30:35 Ecos-Appliance kernel: Zone ranges:
Apr 1 17:30:35 Ecos-Appliance kernel: DMA [mem
0x00001000-0x00ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: Normal [mem
0x01000000-0x377fdfff]
Apr 1 17:30:35 Ecos-Appliance kernel: HighMem [mem
0x377fe000-0x7affffff]
Apr 1 17:30:35 Ecos-Appliance kernel: Movable zone start for each node
Apr 1 17:30:35 Ecos-Appliance kernel: Early memory node ranges
Apr 1 17:30:35 Ecos-Appliance kernel: node 0: [mem
0x00001000-0x00057fff]
Apr 1 17:30:35 Ecos-Appliance kernel: node 0: [mem
0x00059000-0x0008efff]
Apr 1 17:30:35 Ecos-Appliance kernel: node 0: [mem
0x00090000-0x0009ffff]
Apr 1 17:30:35 Ecos-Appliance kernel: node 0: [mem
0x00100000-0x7ad13fff]
Apr 1 17:30:35 Ecos-Appliance kernel: node 0: [mem
0x7ad53000-0x7ad5efff]
Apr 1 17:30:35 Ecos-Appliance kernel: node 0: [mem
0x7ad8f000-0x7ae38fff]
Apr 1 17:30:35 Ecos-Appliance kernel: node 0: [mem
0x7ae8f000-0x7aecffff]
Apr 1 17:30:35 Ecos-Appliance kernel: node 0: [mem
0x7aeff000-0x7af7afff]
Apr 1 17:30:35 Ecos-Appliance kernel: node 0: [mem
0x7afe5000-0x7affffff]
Apr 1 17:30:35 Ecos-Appliance kernel: Initmem setup node 0 [mem
0x00001000-0x7affffff]
Apr 1 17:30:35 Ecos-Appliance kernel: On node 0 totalpages: 503359
Apr 1 17:30:35 Ecos-Appliance kernel: free_area_init_node: node 0,
pgdat c16fbf00, node_mem_map f67a9020
Apr 1 17:30:35 Ecos-Appliance kernel: DMA zone: 32 pages used for memmap
Apr 1 17:30:35 Ecos-Appliance kernel: DMA zone: 0 pages reserved
Apr 1 17:30:35 Ecos-Appliance kernel: DMA zone: 3997 pages, LIFO batch:0
Apr 1 17:30:35 Ecos-Appliance kernel: Normal zone: 1744 pages used
for memmap
Apr 1 17:30:35 Ecos-Appliance kernel: Normal zone: 223230 pages, LIFO
batch:31
Apr 1 17:30:35 Ecos-Appliance kernel: HighMem zone: 2161 pages used
for memmap
Apr 1 17:30:35 Ecos-Appliance kernel: HighMem zone: 276132 pages,
LIFO batch:31
Apr 1 17:30:35 Ecos-Appliance kernel: Using APIC driver default
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: PM-Timer IO Port: 0x408
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Local APIC address 0xfee00000
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x00] enabled)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC (acpi_id[0x02]
lapic_id[0x02] enabled)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC (acpi_id[0x03]
lapic_id[0x04] enabled)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x06] enabled)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC (acpi_id[0x05]
lapic_id[0x01] enabled)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC (acpi_id[0x06]
lapic_id[0x03] enabled)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC (acpi_id[0x07]
lapic_id[0x05] enabled)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC (acpi_id[0x08]
lapic_id[0x07] enabled)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC_NMI (acpi_id[0x01]
high edge lint[0x1])
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC_NMI (acpi_id[0x02]
high edge lint[0x1])
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC_NMI (acpi_id[0x03]
high edge lint[0x1])
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC_NMI (acpi_id[0x04]
high edge lint[0x1])
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC_NMI (acpi_id[0x05]
high edge lint[0x1])
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC_NMI (acpi_id[0x06]
high edge lint[0x1])
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC_NMI (acpi_id[0x07]
high edge lint[0x1])
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: LAPIC_NMI (acpi_id[0x08]
high edge lint[0x1])
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: IOAPIC (id[0x02]
address[0xfec00000] gsi_base[0])
Apr 1 17:30:35 Ecos-Appliance kernel: IOAPIC[0]: apic_id 2, version 32,
address 0xfec00000, GSI 0-23
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq
0 global_irq 2 dfl dfl)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq
9 global_irq 9 high level)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: IRQ0 used by override.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: IRQ9 used by override.
Apr 1 17:30:35 Ecos-Appliance kernel: Using ACPI (MADT) for SMP
configuration information
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: HPET id: 0x8086a201 base:
0xfed00000
Apr 1 17:30:35 Ecos-Appliance kernel: smpboot: Allowing 8 CPUs, 0
hotplug CPUs
Apr 1 17:30:35 Ecos-Appliance kernel: e820: [mem 0x7fa00000-0xe00f7fff]
available for PCI devices
Apr 1 17:30:35 Ecos-Appliance kernel: Booting paravirtualized kernel on
bare hardware
Apr 1 17:30:35 Ecos-Appliance kernel: efi: Setup done, disabling due to
32/64-bit mismatch
Apr 1 17:30:35 Ecos-Appliance kernel: setup_percpu: NR_CPUS:8
nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
Apr 1 17:30:35 Ecos-Appliance kernel: PERCPU: Embedded 14 pages/cpu
@f672d000 s26624 r0 d30720 u57344
Apr 1 17:30:35 Ecos-Appliance kernel: pcpu-alloc: s26624 r0 d30720
u57344 alloc=14*4096
Apr 1 17:30:35 Ecos-Appliance kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0]
3 [0] 4 [0] 5 [0] 6 [0] 7
Apr 1 17:30:35 Ecos-Appliance kernel: Built 1 zonelists in Zone order,
mobility grouping on. Total pages: 501583
Apr 1 17:30:35 Ecos-Appliance kernel: Kernel command line:
BOOT_IMAGE=/src7/vmbbmthc root=8:23
uuid=d93e2344-84f1-4944-a59c-a8d1a77f1632 confdev=/dev/sdb8 panic=10
certdev=/dev/sdb3 bootlang=de_DE console=tty1 x11prop=0 x11vesa=
loglevel=1 splash=silent hwtest=1 AUTOSAVETEST=1 conftype=auto
Apr 1 17:30:35 Ecos-Appliance kernel: PID hash table entries: 4096
(order: 2, 16384 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: Dentry cache hash table entries:
131072 (order: 7, 524288 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: Inode-cache hash table entries:
65536 (order: 6, 262144 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing CPU#0
Apr 1 17:30:35 Ecos-Appliance kernel: xsave: enabled xstate_bv 0x7,
cntxt size 0x340 using standard form
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing HighMem for node 0
(000377fe:0007b000)
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing Movable for node 0
(00000000:00000000)
Apr 1 17:30:35 Ecos-Appliance kernel: Memory: 1709256K/2013436K
available (4858K kernel code, 362K rwdata, 1960K rodata, 488K init, 308K
bss, 304180K reserved, 826512K highmem)
Apr 1 17:30:35 Ecos-Appliance kernel: virtual kernel memory layout:
Apr 1 17:30:35 Ecos-Appliance kernel: fixmap : 0xfff16000 -
0xfffff000 ( 932 kB)
Apr 1 17:30:35 Ecos-Appliance kernel: pkmap : 0xff800000 -
0xffc00000 (4096 kB)
Apr 1 17:30:35 Ecos-Appliance kernel: vmalloc : 0xf7ffe000 -
0xff7fe000 ( 120 MB)
Apr 1 17:30:35 Ecos-Appliance kernel: lowmem : 0xc0000000 -
0xf77fe000 ( 887 MB)
Apr 1 17:30:35 Ecos-Appliance kernel: .init : 0xc1706000 -
0xc1780000 ( 488 kB)
Apr 1 17:30:35 Ecos-Appliance kernel: .data : 0xc14bee06 -
0xc1704a40 (2327 kB)
Apr 1 17:30:35 Ecos-Appliance kernel: .text : 0xc1000000 -
0xc14bee06 (4859 kB)
Apr 1 17:30:35 Ecos-Appliance kernel: Checking if this processor
honours the WP bit even in supervisor mode...Ok.
Apr 1 17:30:35 Ecos-Appliance kernel: Hierarchical RCU implementation.
Apr 1 17:30:35 Ecos-Appliance kernel: NR_IRQS:2304 nr_irqs:488 0
Apr 1 17:30:35 Ecos-Appliance kernel: CPU 0 irqstacks, hard=f6008000
soft=f600a000
Apr 1 17:30:35 Ecos-Appliance kernel: Console: colour dummy device 80x25
Apr 1 17:30:35 Ecos-Appliance kernel: console [tty1] enabled
Apr 1 17:30:35 Ecos-Appliance kernel: hpet clockevent registered
Apr 1 17:30:35 Ecos-Appliance kernel: tsc: Fast TSC calibration using PIT
Apr 1 17:30:35 Ecos-Appliance kernel: tsc: Detected 2294.851 MHz processor
Apr 1 17:30:35 Ecos-Appliance kernel: Calibrating delay loop (skipped),
value calculated using timer frequency.. 4589.70 BogoMIPS (lpj=22948510)
Apr 1 17:30:35 Ecos-Appliance kernel: pid_max: default: 32768 minimum: 301
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Core revision 20140926
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: All ACPI Tables
successfully acquired
Apr 1 17:30:35 Ecos-Appliance kernel: Security Framework initialized
Apr 1 17:30:35 Ecos-Appliance kernel: Mount-cache hash table entries:
2048 (order: 1, 8192 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: Mountpoint-cache hash table
entries: 2048 (order: 1, 8192 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: CPU: Physical Processor ID: 0
Apr 1 17:30:35 Ecos-Appliance kernel: CPU: Processor Core ID: 0
Apr 1 17:30:35 Ecos-Appliance kernel: ENERGY_PERF_BIAS: Set to
'normal', was 'performance'
Apr 1 17:30:35 Ecos-Appliance kernel: ENERGY_PERF_BIAS: View and update
with x86_energy_perf_policy(8)
Apr 1 17:30:35 Ecos-Appliance kernel: mce: CPU supports 10 MCE banks
Apr 1 17:30:35 Ecos-Appliance kernel: CPU0: Thermal monitoring enabled
(TM1)
Apr 1 17:30:35 Ecos-Appliance kernel: Last level iTLB entries: 4KB
1024, 2MB 1024, 4MB 1024
Apr 1 17:30:35 Ecos-Appliance kernel: Last level dTLB entries: 4KB
1024, 2MB 1024, 4MB 1024, 1GB 4
Apr 1 17:30:35 Ecos-Appliance kernel: Freeing SMP alternatives memory:
20K (c1780000 - c1785000)
Apr 1 17:30:35 Ecos-Appliance kernel: Enabling APIC mode: Flat. Using
1 I/O APICs
Apr 1 17:30:35 Ecos-Appliance kernel: ..TIMER: vector=0x30 apic1=0
pin1=2 apic2=-1 pin2=-1
Apr 1 17:30:35 Ecos-Appliance kernel: smpboot: CPU0: Intel(R) Core(TM)
i7-4850HQ CPU @ 2.30GHz (fam: 06, model: 46, stepping: 01)
Apr 1 17:30:35 Ecos-Appliance kernel: TSC deadline timer enabled
Apr 1 17:30:35 Ecos-Appliance kernel: Performance Events: PEBS fmt2+,
16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
Apr 1 17:30:35 Ecos-Appliance kernel: ... version: 3
Apr 1 17:30:35 Ecos-Appliance kernel: ... bit width: 48
Apr 1 17:30:35 Ecos-Appliance kernel: ... generic registers: 4
Apr 1 17:30:35 Ecos-Appliance kernel: ... value mask: 0000ffffffffffff
Apr 1 17:30:35 Ecos-Appliance kernel: ... max period: 0000ffffffffffff
Apr 1 17:30:35 Ecos-Appliance kernel: ... fixed-purpose events: 3
Apr 1 17:30:35 Ecos-Appliance kernel: ... event mask: 000000070000000f
Apr 1 17:30:35 Ecos-Appliance kernel: CPU 1 irqstacks, hard=f60e0000
soft=f60e2000
Apr 1 17:30:35 Ecos-Appliance kernel: x86: Booting SMP configuration:
Apr 1 17:30:35 Ecos-Appliance kernel: .... node #0, CPUs: #1
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing CPU#1
Apr 1 17:30:35 Ecos-Appliance kernel: CPU 2 irqstacks, hard=f60f4000
soft=f60f6000
Apr 1 17:30:35 Ecos-Appliance kernel: #2
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing CPU#2
Apr 1 17:30:35 Ecos-Appliance kernel: CPU 3 irqstacks, hard=f6108000
soft=f610a000
Apr 1 17:30:35 Ecos-Appliance kernel: #3
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing CPU#3
Apr 1 17:30:35 Ecos-Appliance kernel: CPU 4 irqstacks, hard=f611c000
soft=f611e000
Apr 1 17:30:35 Ecos-Appliance kernel: #4
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing CPU#4
Apr 1 17:30:35 Ecos-Appliance kernel: CPU 5 irqstacks, hard=f614e000
soft=f6150000
Apr 1 17:30:35 Ecos-Appliance kernel: #5
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing CPU#5
Apr 1 17:30:35 Ecos-Appliance kernel: CPU 6 irqstacks, hard=f6162000
soft=f6164000
Apr 1 17:30:35 Ecos-Appliance kernel: #6
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing CPU#6
Apr 1 17:30:35 Ecos-Appliance kernel: CPU 7 irqstacks, hard=f6176000
soft=f6178000
Apr 1 17:30:35 Ecos-Appliance kernel: #7
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing CPU#7
Apr 1 17:30:35 Ecos-Appliance kernel: x86: Booted up 1 node, 8 CPUs
Apr 1 17:30:35 Ecos-Appliance kernel: smpboot: Total of 8 processors
activated (36717.61 BogoMIPS)
Apr 1 17:30:35 Ecos-Appliance kernel: devtmpfs: initialized
Apr 1 17:30:35 Ecos-Appliance kernel: PM: Registering ACPI NVS region
[mem 0x7ad14000-0x7ad52fff] (258048 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: xor: automatically using best
checksumming function:
Apr 1 17:30:35 Ecos-Appliance kernel: avx : 29015.200 MB/sec
Apr 1 17:30:35 Ecos-Appliance kernel: NET: Registered protocol family 16
Apr 1 17:30:35 Ecos-Appliance kernel: cpuidle: using governor ladder
Apr 1 17:30:35 Ecos-Appliance kernel: cpuidle: using governor menu
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: bus type PCI registered
Apr 1 17:30:35 Ecos-Appliance kernel: acpiphp: ACPI Hot Plug PCI
Controller Driver version: 0.5
Apr 1 17:30:35 Ecos-Appliance kernel: PCI: MMCONFIG for domain 0000
[bus 00-9c] at [mem 0xe0000000-0xe9cfffff] (base 0xe0000000)
Apr 1 17:30:35 Ecos-Appliance kernel: PCI: not using MMCONFIG
Apr 1 17:30:35 Ecos-Appliance kernel: PCI: Using configuration type 1
for base access
Apr 1 17:30:35 Ecos-Appliance kernel: raid6: mmxx1 6181 MB/s
Apr 1 17:30:35 Ecos-Appliance kernel: raid6: mmxx2 6480 MB/s
Apr 1 17:30:35 Ecos-Appliance kernel: raid6: sse1x1 5267 MB/s
Apr 1 17:30:35 Ecos-Appliance kernel: raid6: sse1x2 6484 MB/s
Apr 1 17:30:35 Ecos-Appliance kernel: raid6: sse2x1 10633 MB/s
Apr 1 17:30:35 Ecos-Appliance kernel: raid6: sse2x2 13105 MB/s
Apr 1 17:30:35 Ecos-Appliance kernel: raid6: avx2x1 20848 MB/s
Apr 1 17:30:35 Ecos-Appliance kernel: raid6: avx2x2 23656 MB/s
Apr 1 17:30:35 Ecos-Appliance kernel: raid6: using algorithm avx2x2
(23656 MB/s)
Apr 1 17:30:35 Ecos-Appliance kernel: raid6: using avx2x1 recovery
algorithm
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Added _OSI(Module Device)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Added _OSI(Processor Device)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Added _OSI(Processor
Aggregator Device)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI : EC: EC description table
is found, configuring boot EC
Apr 1 17:30:35 Ecos-Appliance kernel: [Firmware Bug]: ACPI: BIOS
_OSI(Linux) query ignored
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Dynamic OEM Table Load:
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: SSDT 0xF5926800 0004F0 (v01
PmRef Cpu0Cst 00003001 INTL 20100915)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Dynamic OEM Table Load:
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: SSDT 0xF5926000 00067C (v01
PmRef ApIst 00003000 INTL 20100915)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Dynamic OEM Table Load:
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: SSDT 0xF5947E00 000119 (v01
PmRef ApCst 00003000 INTL 20100915)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Interpreter enabled
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI Exception: AE_NOT_FOUND,
While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI Exception: AE_NOT_FOUND,
While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: (supports S0 S3 S5)
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Using IOAPIC for interrupt
routing
Apr 1 17:30:35 Ecos-Appliance kernel: PCI: MMCONFIG for domain 0000
[bus 00-9c] at [mem 0xe0000000-0xe9cfffff] (base 0xe0000000)
Apr 1 17:30:35 Ecos-Appliance kernel: PCI: MMCONFIG at [mem
0xe0000000-0xe9cfffff] reserved in ACPI motherboard resources
Apr 1 17:30:35 Ecos-Appliance kernel: PCI: Using MMCONFIG for extended
config space
Apr 1 17:30:35 Ecos-Appliance kernel: PCI: Using host bridge windows
from ACPI; if necessary, use "pci=nocrs" and report a bug
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: PCI Root Bridge [PCI0]
(domain 0000 [bus 00-ff])
Apr 1 17:30:35 Ecos-Appliance kernel: acpi PNP0A08:00: _OSC: OS assumes
control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
Apr 1 17:30:35 Ecos-Appliance kernel: acpi PNP0A08:00: [Firmware Info]:
MMCONFIG for domain 0000 [bus 00-9c] only partially covers this bridge
Apr 1 17:30:35 Ecos-Appliance kernel: PCI host bridge to bus 0000:00
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [bus 00-ff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [io 0x0000-0x0cf7]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [io 0x0d00-0xffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000a0000-0x000bffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000c0000-0x000c3fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000c4000-0x000c7fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000c8000-0x000cbfff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000cc000-0x000cffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000d0000-0x000d3fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000d4000-0x000d7fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000d8000-0x000dbfff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000dc000-0x000dffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000e0000-0x000e3fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000e4000-0x000e7fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000e8000-0x000ebfff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000ec000-0x000effff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x000f0000-0x000fffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0x7fa00000-0xfeafffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: root bus
resource [mem 0xfed40000-0xfed44fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:00.0: [8086:0d04]
type 00 class 0x060000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: [8086:0d01]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: PME# supported
from D0 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: System wakeup
disabled by ACPI
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: [8086:0d05]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: PME# supported
from D0 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: System wakeup
disabled by ACPI
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:14.0: [8086:8c31]
type 00 class 0x0c0330
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:14.0: reg 0x10: [mem
0xc1e00000-0xc1e0ffff 64bit]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:14.0: PME# supported
from D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:14.0: System wakeup
disabled by ACPI
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:16.0: [8086:8c3a]
type 00 class 0x078000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:16.0: reg 0x10: [mem
0xc1e19100-0xc1e1910f 64bit]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:16.0: PME# supported
from D0 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1b.0: [8086:8c20]
type 00 class 0x040300
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1b.0: reg 0x10: [mem
0xc1e14000-0xc1e17fff 64bit]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1b.0: PME# supported
from D0 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1b.0: System wakeup
disabled by ACPI
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: [8086:8c10]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: PME# supported
from D0 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.2: [8086:8c14]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.2: PME# supported
from D0 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.2: System wakeup
disabled by ACPI
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.3: [8086:8c16]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.3: PME# supported
from D0 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.3: System wakeup
disabled by ACPI
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.4: [8086:8c18]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.4: PME# supported
from D0 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.4: System wakeup
disabled by ACPI
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1f.0: [8086:8c4b]
type 00 class 0x060100
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1f.3: [8086:8c22]
type 00 class 0x0c0500
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1f.3: reg 0x10: [mem
0xc1e19000-0xc1e190ff 64bit]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1f.3: reg 0x20: [io
0xefa0-0xefbf]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:01:00.0: [10de:0fe9]
type 00 class 0x030000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:01:00.0: reg 0x10: [mem
0xc0000000-0xc0ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:01:00.0: reg 0x14: [mem
0x80000000-0x8fffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:01:00.0: reg 0x1c: [mem
0x90000000-0x91ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:01:00.0: reg 0x24: [io
0x1000-0x107f]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:01:00.0: reg 0x30: [mem
0xc1000000-0xc107ffff pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:01:00.0: System wakeup
disabled by ACPI
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:01:00.1: [10de:0e1b]
type 00 class 0x040300
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:01:00.1: reg 0x10: [mem
0xc1080000-0xc1083fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: PCI bridge to
[bus 01]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: bridge window
[io 0x1000-0x1fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: bridge window
[mem 0xc0000000-0xc10fffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: bridge window
[mem 0x80000000-0x91ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: [8086:156d]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: supports D1 D2
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: PME# supported
from D0 D1 D2 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: PCI bridge to
[bus 06-9c]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: bridge window
[io 0x3000-0x5fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: bridge window
[mem 0xc1f00000-0xcdffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: bridge window
[mem 0xce000000-0xd9ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: [8086:156d]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: supports D1 D2
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: PME# supported
from D0 D1 D2 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: [8086:156d]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: supports D1 D2
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: PME# supported
from D0 D1 D2 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: [8086:156d]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: supports D1 D2
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: PME# supported
from D0 D1 D2 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: [8086:156d]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: supports D1 D2
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: PME# supported
from D0 D1 D2 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: [8086:156d]
type 01 class 0x060400
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: supports D1 D2
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: PME# supported
from D0 D1 D2 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: PCI bridge to
[bus 07-6c]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: bridge window
[io 0x3000-0x4fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: bridge window
[mem 0xc1f00000-0xc9ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: bridge window
[mem 0xce000000-0xd5ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:08:00.0: [8086:156c]
type 00 class 0x088000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:08:00.0: reg 0x10: [mem
0xc1f00000-0xc1f3ffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:08:00.0: reg 0x14: [mem
0xc1f40000-0xc1f40fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:08:00.0: supports D1 D2
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:08:00.0: PME# supported
from D0 D1 D2 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: PCI bridge to
[bus 08]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: bridge window
[mem 0xc1f00000-0xc1ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: PCI bridge to
[bus 09-39]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: bridge window
[io 0x3000-0x3fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: bridge window
[mem 0xc2000000-0xc5ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: bridge window
[mem 0xce000000-0xd1ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: PCI bridge to
[bus 3a]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: PCI bridge to
[bus 3b-6b]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: bridge window
[io 0x4000-0x4fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: bridge window
[mem 0xc6000000-0xc9ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: bridge window
[mem 0xd2000000-0xd5ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: PCI bridge to
[bus 6c]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: PCI bridge to
[bus 02]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:03:00.0: [14e4:43a0]
type 00 class 0x028000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:03:00.0: reg 0x10: [mem
0xc1a00000-0xc1a07fff 64bit]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:03:00.0: reg 0x18: [mem
0xc1800000-0xc19fffff 64bit]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:03:00.0: supports D1 D2
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:03:00.0: PME# supported
from D0 D1 D2 D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:03:00.0: System wakeup
disabled by ACPI
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.2: PCI bridge to
[bus 03]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.2: bridge window
[mem 0xc1800000-0xc1afffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:04:00.0: [14e4:1570]
type 00 class 0x048000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:04:00.0: reg 0x10: [mem
0xc1d00000-0xc1d0ffff 64bit]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:04:00.0: reg 0x18: [mem
0xa0000000-0xafffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:04:00.0: reg 0x20: [mem
0xc1c00000-0xc1cfffff 64bit]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:04:00.0: supports D1
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:04:00.0: PME# supported
from D0 D3hot
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.3: PCI bridge to
[bus 04]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.3: bridge window
[mem 0xc1c00000-0xc1dfffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.3: bridge window
[mem 0xa0000000-0xafffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:05:00.0: [144d:1600]
type 00 class 0x010601
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:05:00.0: reg 0x24: [mem
0xc1b00000-0xc1b01fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:05:00.0: reg 0x30: [mem
0xffff0000-0xffffffff pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:05:00.0: PME# supported
from D3hot D3cold
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.4: PCI bridge to
[bus 05]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.4: bridge window
[mem 0xc1b00000-0xc1bfffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: on NUMA node 0
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: PCI Interrupt Link [LNKA]
(IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: PCI Interrupt Link [LNKB]
(IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: PCI Interrupt Link [LNKC]
(IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: PCI Interrupt Link [LNKD]
(IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: PCI Interrupt Link [LNKE]
(IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: PCI Interrupt Link [LNKF]
(IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: PCI Interrupt Link [LNKG]
(IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: PCI Interrupt Link [LNKH]
(IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Enabled 2 GPEs in block 00
to 3F
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI : EC: GPE = 0x17, I/O:
command/status = 0x66, data = 0x62
Apr 1 17:30:35 Ecos-Appliance kernel: vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
Apr 1 17:30:35 Ecos-Appliance kernel: vgaarb: loaded
Apr 1 17:30:35 Ecos-Appliance kernel: vgaarb: setting as boot device:
PCI:0000:01:00.0
Apr 1 17:30:35 Ecos-Appliance kernel: vgaarb: bridge control possible
0000:01:00.0
Apr 1 17:30:35 Ecos-Appliance kernel: SCSI subsystem initialized
Apr 1 17:30:35 Ecos-Appliance kernel: libata version 3.00 loaded.
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: bus type USB registered
Apr 1 17:30:35 Ecos-Appliance kernel: usbcore: registered new interface
driver usbfs
Apr 1 17:30:35 Ecos-Appliance kernel: usbcore: registered new interface
driver hub
Apr 1 17:30:35 Ecos-Appliance kernel: usbcore: registered new device
driver usb
Apr 1 17:30:35 Ecos-Appliance kernel: pps_core: LinuxPPS API ver. 1
registered
Apr 1 17:30:35 Ecos-Appliance kernel: pps_core: Software ver. 5.3.6 -
Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
Apr 1 17:30:35 Ecos-Appliance kernel: PTP clock support registered
Apr 1 17:30:35 Ecos-Appliance kernel: PCI: Using ACPI for IRQ routing
Apr 1 17:30:35 Ecos-Appliance kernel: PCI: pci_cache_line_size set to
64 bytes
Apr 1 17:30:35 Ecos-Appliance kernel: e820: reserve RAM buffer [mem
0x00058000-0x0005ffff]
Apr 1 17:30:35 Ecos-Appliance kernel: e820: reserve RAM buffer [mem
0x0008f000-0x0008ffff]
Apr 1 17:30:35 Ecos-Appliance kernel: e820: reserve RAM buffer [mem
0x7ad14000-0x7bffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: e820: reserve RAM buffer [mem
0x7ad5f000-0x7bffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: e820: reserve RAM buffer [mem
0x7ae39000-0x7bffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: e820: reserve RAM buffer [mem
0x7aed0000-0x7bffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: e820: reserve RAM buffer [mem
0x7af7b000-0x7bffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: e820: reserve RAM buffer [mem
0x7b000000-0x7bffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: NET: Registered protocol family 8
Apr 1 17:30:35 Ecos-Appliance kernel: NET: Registered protocol family 20
Apr 1 17:30:35 Ecos-Appliance kernel: Switched to clocksource hpet
Apr 1 17:30:35 Ecos-Appliance kernel: FS-Cache: Loaded
Apr 1 17:30:35 Ecos-Appliance kernel: pnp: PnP ACPI init
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:00: [mem
0xfed00000-0xfed03fff] has been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:00: Plug and Play ACPI
device, IDs PNP0103 PNP0c01 (active)
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:01: [io 0xffff] has
been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:01: [io 0x0400-0x047f]
could not be reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:01: [io 0x0800-0x087f]
has been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:01: Plug and Play ACPI
device, IDs PNP0c02 (active)
Apr 1 17:30:35 Ecos-Appliance kernel: pnp 00:02: Plug and Play ACPI
device, IDs PNP0b00 (active)
Apr 1 17:30:35 Ecos-Appliance kernel: pnp 00:03: Plug and Play ACPI
device, IDs APP000b (active)
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: [mem
0xfed1c000-0xfed1ffff] has been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: [mem
0xfed10000-0xfed17fff] has been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: [mem
0xfed18000-0xfed18fff] has been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: [mem
0xfed19000-0xfed19fff] has been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: [mem
0xe0000000-0xefffffff] could not be reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: [mem
0xfed20000-0xfed3ffff] has been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: [mem
0xfed90000-0xfed93fff] has been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: [mem
0xfed45000-0xfed8ffff] has been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: [mem
0xff000000-0xffffffff] could not be reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: [mem
0xfee00000-0xfeefffff] has been reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:04: Plug and Play ACPI
device, IDs PNP0c02 (active)
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:05: [mem
0x20000000-0x201fffff] could not be reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:05: [mem
0x40000000-0x401fffff] could not be reserved
Apr 1 17:30:35 Ecos-Appliance kernel: system 00:05: Plug and Play ACPI
device, IDs PNP0c01 (active)
Apr 1 17:30:35 Ecos-Appliance kernel: pnp: PnP ACPI: found 6 devices
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:05:00.0: can't claim BAR
6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: bridge window
[io 0x1000-0x0fff] to [bus 08] add_size 1000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: bridge window
[mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: bridge window
[io 0x1000-0x0fff] to [bus 3a] add_size 1000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: bridge window
[mem 0x00100000-0x000fffff 64bit pref] to [bus 3a] add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: bridge window
[mem 0x00100000-0x000fffff] to [bus 3a] add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: bridge window
[io 0x1000-0x0fff] to [bus 6c] add_size 1000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: bridge window
[mem 0x00100000-0x000fffff 64bit pref] to [bus 6c] add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: bridge window
[mem 0x00100000-0x000fffff] to [bus 6c] add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: bridge window
[io 0x1000-0x0fff] to [bus 02] add_size 1000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: bridge window
[mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: bridge window
[mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: res[8]=[mem
0x00100000-0x000fffff] get_res_add_size add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: res[9]=[mem
0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: res[7]=[io
0x1000-0x0fff] get_res_add_size add_size 1000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: BAR 8: assigned
[mem 0x7fa00000-0x7fbfffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: BAR 9: assigned
[mem 0x7fc00000-0x7fdfffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: BAR 7: assigned
[io 0x2000-0x2fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: PCI bridge to
[bus 01]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: bridge window
[io 0x1000-0x1fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: bridge window
[mem 0xc0000000-0xc10fffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.0: bridge window
[mem 0x80000000-0x91ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: res[9]=[mem
0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: res[8]=[mem
0x00100000-0x000fffff] get_res_add_size add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: res[9]=[mem
0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: res[8]=[mem
0x00100000-0x000fffff] get_res_add_size add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: res[9]=[mem
0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: res[7]=[io
0x1000-0x0fff] get_res_add_size add_size 1000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: res[7]=[io
0x1000-0x0fff] get_res_add_size add_size 1000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: res[7]=[io
0x1000-0x0fff] get_res_add_size add_size 1000
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: BAR 9: no space
for [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: BAR 9: failed
to assign [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 8: no space
for [mem size 0x00200000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 8: failed
to assign [mem size 0x00200000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 9: no space
for [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 9: failed
to assign [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 8: no space
for [mem size 0x00200000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 8: failed
to assign [mem size 0x00200000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 9: no space
for [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 9: failed
to assign [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: BAR 7: no space
for [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: BAR 7: failed
to assign [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 7: no space
for [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 7: failed
to assign [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 7: no space
for [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 7: failed
to assign [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 8: no space
for [mem size 0x00200000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 8: failed
to assign [mem size 0x00200000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 9: no space
for [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 9: failed
to assign [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 7: no space
for [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: BAR 7: failed
to assign [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 8: no space
for [mem size 0x00200000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 8: failed
to assign [mem size 0x00200000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 9: no space
for [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 9: failed
to assign [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 7: no space
for [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: BAR 7: failed
to assign [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: BAR 9: no space
for [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: BAR 9: failed
to assign [mem size 0x00200000 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: BAR 7: no space
for [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: BAR 7: failed
to assign [io size 0x1000]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: PCI bridge to
[bus 08]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:00.0: bridge window
[mem 0xc1f00000-0xc1ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: PCI bridge to
[bus 09-39]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: bridge window
[io 0x3000-0x3fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: bridge window
[mem 0xc2000000-0xc5ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:03.0: bridge window
[mem 0xce000000-0xd1ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:04.0: PCI bridge to
[bus 3a]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: PCI bridge to
[bus 3b-6b]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: bridge window
[io 0x4000-0x4fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: bridge window
[mem 0xc6000000-0xc9ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:05.0: bridge window
[mem 0xd2000000-0xd5ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:07:06.0: PCI bridge to
[bus 6c]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: PCI bridge to
[bus 07-6c]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: bridge window
[io 0x3000-0x4fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: bridge window
[mem 0xc1f00000-0xc9ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:06:00.0: bridge window
[mem 0xce000000-0xd5ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: PCI bridge to
[bus 06-9c]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: bridge window
[io 0x3000-0x5fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: bridge window
[mem 0xc1f00000-0xcdffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:01.1: bridge window
[mem 0xce000000-0xd9ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: PCI bridge to
[bus 02]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: bridge window
[io 0x2000-0x2fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: bridge window
[mem 0x7fa00000-0x7fbfffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.0: bridge window
[mem 0x7fc00000-0x7fdfffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.2: PCI bridge to
[bus 03]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.2: bridge window
[mem 0xc1800000-0xc1afffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.3: PCI bridge to
[bus 04]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.3: bridge window
[mem 0xc1c00000-0xc1dfffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.3: bridge window
[mem 0xa0000000-0xafffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:05:00.0: BAR 6: assigned
[mem 0xc1b10000-0xc1b1ffff pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.4: PCI bridge to
[bus 05]
Apr 1 17:30:35 Ecos-Appliance kernel: pci 0000:00:1c.4: bridge window
[mem 0xc1b00000-0xc1bfffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 4 [io
0x0000-0x0cf7]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 5 [io
0x0d00-0xffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 6 [mem
0x000a0000-0x000bffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 7 [mem
0x000c0000-0x000c3fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 8 [mem
0x000c4000-0x000c7fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 9 [mem
0x000c8000-0x000cbfff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 10 [mem
0x000cc000-0x000cffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 11 [mem
0x000d0000-0x000d3fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 12 [mem
0x000d4000-0x000d7fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 13 [mem
0x000d8000-0x000dbfff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 14 [mem
0x000dc000-0x000dffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 15 [mem
0x000e0000-0x000e3fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 16 [mem
0x000e4000-0x000e7fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 17 [mem
0x000e8000-0x000ebfff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 18 [mem
0x000ec000-0x000effff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 19 [mem
0x000f0000-0x000fffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 20 [mem
0x7fa00000-0xfeafffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:00: resource 21 [mem
0xfed40000-0xfed44fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:01: resource 0 [io
0x1000-0x1fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:01: resource 1 [mem
0xc0000000-0xc10fffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:01: resource 2 [mem
0x80000000-0x91ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:06: resource 0 [io
0x3000-0x5fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:06: resource 1 [mem
0xc1f00000-0xcdffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:06: resource 2 [mem
0xce000000-0xd9ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:07: resource 0 [io
0x3000-0x4fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:07: resource 1 [mem
0xc1f00000-0xc9ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:07: resource 2 [mem
0xce000000-0xd5ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:08: resource 1 [mem
0xc1f00000-0xc1ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:09: resource 0 [io
0x3000-0x3fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:09: resource 1 [mem
0xc2000000-0xc5ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:09: resource 2 [mem
0xce000000-0xd1ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:3b: resource 0 [io
0x4000-0x4fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:3b: resource 1 [mem
0xc6000000-0xc9ffffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:3b: resource 2 [mem
0xd2000000-0xd5ffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:02: resource 0 [io
0x2000-0x2fff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:02: resource 1 [mem
0x7fa00000-0x7fbfffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:02: resource 2 [mem
0x7fc00000-0x7fdfffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:03: resource 1 [mem
0xc1800000-0xc1afffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:04: resource 1 [mem
0xc1c00000-0xc1dfffff]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:04: resource 2 [mem
0xa0000000-0xafffffff 64bit pref]
Apr 1 17:30:35 Ecos-Appliance kernel: pci_bus 0000:05: resource 1 [mem
0xc1b00000-0xc1bfffff]
Apr 1 17:30:35 Ecos-Appliance kernel: NET: Registered protocol family 2
Apr 1 17:30:35 Ecos-Appliance kernel: TCP established hash table
entries: 8192 (order: 3, 32768 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: TCP bind hash table entries: 8192
(order: 4, 65536 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: TCP: Hash tables configured
(established 8192 bind 8192)
Apr 1 17:30:35 Ecos-Appliance kernel: TCP: reno registered
Apr 1 17:30:35 Ecos-Appliance kernel: UDP hash table entries: 512
(order: 2, 16384 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: UDP-Lite hash table entries: 512
(order: 2, 16384 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: NET: Registered protocol family 1
Apr 1 17:30:35 Ecos-Appliance kernel: PCI: CLS 256 bytes, default 64
Apr 1 17:30:35 Ecos-Appliance kernel: Trying to unpack rootfs image as
initramfs...
Apr 1 17:30:35 Ecos-Appliance kernel: rootfs image is not initramfs (no
cpio magic); looks like an initrd
Apr 1 17:30:35 Ecos-Appliance kernel: Freeing initrd memory: 980K
(f7709000 - f77fe000)
Apr 1 17:30:35 Ecos-Appliance kernel: futex hash table entries: 2048
(order: 5, 131072 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: Initialise system trusted keyring
Apr 1 17:30:35 Ecos-Appliance kernel: VFS: Disk quotas dquot_6.5.2
Apr 1 17:30:35 Ecos-Appliance kernel: Dquot-cache hash table entries:
1024 (order 0, 4096 bytes)
Apr 1 17:30:35 Ecos-Appliance kernel: squashfs: version 4.0
(2009/01/31) Phillip Lougher
Apr 1 17:30:35 Ecos-Appliance kernel: Key type cifs.spnego registered
Apr 1 17:30:35 Ecos-Appliance kernel: Key type cifs.idmap registered
Apr 1 17:30:35 Ecos-Appliance kernel: ntfs: driver 2.1.31 [Flags: R/O].
Apr 1 17:30:35 Ecos-Appliance kernel: fuse init (API version 7.23)
Apr 1 17:30:35 Ecos-Appliance kernel: msgmni has been set to 1726
Apr 1 17:30:35 Ecos-Appliance kernel: NET: Registered protocol family 38
Apr 1 17:30:35 Ecos-Appliance kernel: Key type asymmetric registered
Apr 1 17:30:35 Ecos-Appliance kernel: Asymmetric key parser 'x509'
registered
Apr 1 17:30:35 Ecos-Appliance kernel: bounce: pool size: 64 pages
Apr 1 17:30:35 Ecos-Appliance kernel: Block layer SCSI generic (bsg)
driver version 0.4 loaded (major 252)
Apr 1 17:30:35 Ecos-Appliance kernel: io scheduler noop registered
Apr 1 17:30:35 Ecos-Appliance kernel: io scheduler deadline registered
Apr 1 17:30:35 Ecos-Appliance kernel: io scheduler cfq registered (default)
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:00:01.0: irq 24 for
MSI/MSI-X
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:00:01.1: irq 25 for
MSI/MSI-X
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:00:1c.0: enabling
device (0000 -> 0003)
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:00:1c.0: irq 26 for
MSI/MSI-X
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:06:00.0: irq 27 for
MSI/MSI-X
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:07:00.0: irq 28 for
MSI/MSI-X
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:07:03.0: enabling
device (0000 -> 0003)
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:07:03.0: irq 29 for
MSI/MSI-X
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:07:04.0: irq 30 for
MSI/MSI-X
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:07:05.0: enabling
device (0000 -> 0003)
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:07:05.0: irq 31 for
MSI/MSI-X
Apr 1 17:30:35 Ecos-Appliance kernel: pcieport 0000:07:06.0: irq 32 for
MSI/MSI-X
Apr 1 17:30:35 Ecos-Appliance kernel: pci_hotplug: PCI Hot Plug PCI
Core version: 0.5
Apr 1 17:30:35 Ecos-Appliance kernel: pciehp: Using ACPI for slot
detection.
Apr 1 17:30:35 Ecos-Appliance kernel: pciehp 0000:07:00.0:pcie24: Slot
#0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
Apr 1 17:30:35 Ecos-Appliance kernel: pciehp 0000:07:00.0:pcie24:
service driver pciehp loaded
Apr 1 17:30:35 Ecos-Appliance kernel: pciehp 0000:07:03.0:pcie24: Slot
#3 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
Apr 1 17:30:35 Ecos-Appliance kernel: pciehp 0000:07:03.0:pcie24:
service driver pciehp loaded
Apr 1 17:30:35 Ecos-Appliance kernel: pciehp 0000:07:04.0:pcie24: Slot
#4 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
Apr 1 17:30:35 Ecos-Appliance kernel: pciehp 0000:07:04.0:pcie24:
service driver pciehp loaded
Apr 1 17:30:35 Ecos-Appliance kernel: pciehp 0000:07:05.0:pcie24: Slot
#5 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
Apr 1 17:30:35 Ecos-Appliance kernel: pciehp 0000:07:05.0:pcie24:
service driver pciehp loaded
Apr 1 17:30:35 Ecos-Appliance kernel: pciehp: PCI Express Hot Plug
Controller Driver version: 0.4
Apr 1 17:30:35 Ecos-Appliance kernel: efifb: probing for efifb
Apr 1 17:30:35 Ecos-Appliance kernel: efifb: framebuffer at 0x80020000,
mapped to 0xf8080000, using 6400k, total 6400k
Apr 1 17:30:35 Ecos-Appliance kernel: efifb: mode is 1280x800x32,
linelength=8192, pages=1
Apr 1 17:30:35 Ecos-Appliance kernel: efifb: scrolling: redraw
Apr 1 17:30:35 Ecos-Appliance kernel: efifb: Truecolor: size=8:8:8:8,
shift=24:16:8:0
Apr 1 17:30:35 Ecos-Appliance kernel: Console: switching to colour
frame buffer device 160x50
Apr 1 17:30:35 Ecos-Appliance kernel: fb0: EFI VGA frame buffer device
Apr 1 17:30:35 Ecos-Appliance kernel: intel_idle: MWAIT substates: 0x42120
Apr 1 17:30:35 Ecos-Appliance kernel: intel_idle: v0.4 model 0x46
Apr 1 17:30:35 Ecos-Appliance kernel: intel_idle:
lapic_timer_reliable_states 0xffffffff
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Deprecated procfs I/F for
AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: AC Adapter [ADP1] (on-line)
Apr 1 17:30:35 Ecos-Appliance kernel: input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Lid Switch [LID0]
Apr 1 17:30:35 Ecos-Appliance kernel: input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Power Button [PWRB]
Apr 1 17:30:35 Ecos-Appliance kernel: input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Sleep Button [SLPB]
Apr 1 17:30:35 Ecos-Appliance kernel: input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Apr 1 17:30:35 Ecos-Appliance kernel: ACPI: Power Button [PWRF]
Apr 1 17:30:35 Ecos-Appliance kernel: Serial: 8250/16550 driver, 4
ports, IRQ sharing disabled
Apr 1 17:30:35 Ecos-Appliance kernel: lp: driver loaded but no devices
found
Apr 1 17:30:35 Ecos-Appliance kernel: brd: module loaded
Apr 1 17:30:35 Ecos-Appliance kernel: loop: module loaded
Apr 1 17:30:35 Ecos-Appliance kernel: HP CISS Driver (v 3.6.26)
Apr 1 17:30:35 Ecos-Appliance kernel: mtip32xx Version 1.3.1
Apr 1 17:30:35 Ecos-Appliance kernel: nullb0: unknown partition table
Apr 1 17:30:35 Ecos-Appliance kernel: nullb1: unknown partition table
Apr 1 17:30:35 Ecos-Appliance kernel: null: module loaded
Apr 1 17:30:35 Ecos-Appliance kernel: isci: Intel(R) C600 SAS
Controller Driver - version 1.2.0
Apr 1 17:30:35 Ecos-Appliance kernel: megasas: 06.805.06.00-rc1 Thu.
Sep. 4 17:00:00 PDT 2014
Apr 1 17:30:35 Ecos-Appliance kernel: mpt2sas version 18.100.00.00 loaded
Apr 1 17:30:35 Ecos-Appliance kernel: mpt3sas version 04.100.00.00 loaded
Apr 1 17:30:35 Ecos-Appliance kernel: GDT-HA: Storage RAID Controller
Driver. Version: 3.05
Apr 1 17:30:35 Ecos-Appliance kernel: ipr: IBM Power RAID SCSI Device
Driver version: 2.6.0 (November 16, 2012)
Apr 1 17:30:35 Ecos-Appliance kernel: esas2r: driver will not be loaded
because no ATTO esas2r devices were found
Apr 1 17:30:35 Ecos-Appliance kernel: VMware PVSCSI driver - version
1.0.5.0-k
Apr 1 17:30:35 Ecos-Appliance kernel: hv_vmbus: registering driver
hv_storvsc
Apr 1 17:30:35 Ecos-Appliance kernel: ahci 0000:05:00.0: version 3.0
Apr 1 17:30:35 Ecos-Appliance kernel: ahci 0000:05:00.0: AHCI 0001.0300
32 slots 1 ports 6 Gbps 0x1 impl SATA mode
Apr 1 17:30:35 Ecos-Appliance kernel: ahci 0000:05:00.0: flags: 64bit
ncq led clo only pio ccc
Apr 1 17:30:35 Ecos-Appliance kernel: scsi host0: ahci
Apr 1 17:30:35 Ecos-Appliance kernel: ata1: SATA max UDMA/133 abar
m8192 at 0xc1b00000 port 0xc1b00100 irq 16
Apr 1 17:30:35 Ecos-Appliance kernel: scsi host1: pata_legacy
Apr 1 17:30:35 Ecos-Appliance kernel: ata2: PATA max PIO4 cmd 0x1f0 ctl
0x3f6 irq 14
Apr 1 17:30:35 Ecos-Appliance kernel: ata1: SATA link up 6.0 Gbps
(SStatus 133 SControl 300)
Apr 1 17:30:35 Ecos-Appliance kernel: ata1.00: unexpected _GTF length (8)
Apr 1 17:30:35 Ecos-Appliance kernel: ata1.00: ATA-8: APPLE SSD
SM0512F, UXM2JA1Q, max UDMA/133
Apr 1 17:30:35 Ecos-Appliance kernel: ata1.00: 977105060 sectors, multi
16: LBA48 NCQ (depth 31/32), AA
Apr 1 17:30:35 Ecos-Appliance kernel: ata1.00: unexpected _GTF length (8)
Apr 1 17:30:35 Ecos-Appliance kernel: ata1.00: configured for UDMA/133
Apr 1 17:30:35 Ecos-Appliance kernel: scsi 0:0:0:0: Direct-Access
ATA APPLE SSD SM0512 JA1Q PQ: 0 ANSI: 5
Apr 1 17:30:35 Ecos-Appliance kernel: sd 0:0:0:0: [sda] 977105060
512-byte logical blocks: (500 GB/465 GiB)
Apr 1 17:30:35 Ecos-Appliance kernel: sd 0:0:0:0: [sda] 4096-byte
physical blocks
Apr 1 17:30:35 Ecos-Appliance kernel: sd 0:0:0:0: [sda] Write Protect
is off
Apr 1 17:30:35 Ecos-Appliance kernel: sd 0:0:0:0: [sda] Mode Sense: 00
3a 00 00
Apr 1 17:30:35 Ecos-Appliance kernel: sd 0:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Apr 1 17:30:35 Ecos-Appliance kernel: sda: sda1 sda2 sda3
Apr 1 17:30:35 Ecos-Appliance kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Apr 1 17:30:35 Ecos-Appliance kernel: scsi host2: pata_legacy
Apr 1 17:30:35 Ecos-Appliance kernel: ata3: PATA max PIO4 cmd 0x170 ctl
0x376 irq 15
Apr 1 17:30:35 Ecos-Appliance kernel: tun: Universal TUN/TAP device
driver, 1.6
Apr 1 17:30:35 Ecos-Appliance kernel: tun: (C) 1999-2004 Max
Krasnyansky <maxk at qualcomm.com>
Apr 1 17:30:35 Ecos-Appliance kernel: Solarflare NET driver v4.0
Apr 1 17:30:35 Ecos-Appliance kernel: PPP generic driver version 2.4.2
Apr 1 17:30:35 Ecos-Appliance kernel: PPP BSD Compression module registered
Apr 1 17:30:35 Ecos-Appliance kernel: PPP Deflate Compression module
registered
Apr 1 17:30:35 Ecos-Appliance kernel: PPP MPPE Compression module
registered
Apr 1 17:30:35 Ecos-Appliance kernel: NET: Registered protocol family 24
Apr 1 17:30:35 Ecos-Appliance kernel: Fusion MPT base driver 3.04.20
Apr 1 17:30:35 Ecos-Appliance kernel: Copyright (c) 1999-2008 LSI
Corporation
Apr 1 17:30:35 Ecos-Appliance kernel: Fusion MPT SPI Host driver 3.04.20
Apr 1 17:30:35 Ecos-Appliance kernel: Fusion MPT SAS Host driver 3.04.20
Apr 1 17:30:35 Ecos-Appliance kernel: xhci_hcd 0000:00:14.0: xHCI Host
Controller
Apr 1 17:30:35 Ecos-Appliance kernel: xhci_hcd 0000:00:14.0: new USB
bus registered, assigned bus number 1
Apr 1 17:30:35 Ecos-Appliance kernel: xhci_hcd 0000:00:14.0: cache line
size of 256 is not supported
Apr 1 17:30:35 Ecos-Appliance kernel: xhci_hcd 0000:00:14.0: irq 33 for
MSI/MSI-X
Apr 1 17:30:35 Ecos-Appliance kernel: hub 1-0:1.0: USB hub found
Apr 1 17:30:35 Ecos-Appliance kernel: hub 1-0:1.0: 14 ports detected
Apr 1 17:30:35 Ecos-Appliance kernel: xhci_hcd 0000:00:14.0: xHCI Host
Controller
Apr 1 17:30:35 Ecos-Appliance kernel: xhci_hcd 0000:00:14.0: new USB
bus registered, assigned bus number 2
Apr 1 17:30:35 Ecos-Appliance kernel: hub 2-0:1.0: USB hub found
Apr 1 17:30:35 Ecos-Appliance kernel: hub 2-0:1.0: 6 ports detected
Apr 1 17:30:35 Ecos-Appliance kernel: ehci_hcd: USB 2.0 'Enhanced' Host
Controller (EHCI) Driver
Apr 1 17:30:35 Ecos-Appliance kernel: ehci-pci: EHCI PCI platform driver
Apr 1 17:30:35 Ecos-Appliance kernel: ehci-platform: EHCI generic
platform driver
Apr 1 17:30:35 Ecos-Appliance kernel: ohci_hcd: USB 1.1 'Open' Host
Controller (OHCI) Driver
Apr 1 17:30:35 Ecos-Appliance kernel: ohci-pci: OHCI PCI platform driver
Apr 1 17:30:35 Ecos-Appliance kernel: ohci-platform: OHCI generic
platform driver
Apr 1 17:30:35 Ecos-Appliance kernel: uhci_hcd: USB Universal Host
Controller Interface driver
Apr 1 17:30:35 Ecos-Appliance kernel: usbcore: registered new interface
driver uas
Apr 1 17:30:35 Ecos-Appliance kernel: usbcore: registered new interface
driver usb-storage
Apr 1 17:30:35 Ecos-Appliance kernel: usbcore: registered new interface
driver ums-datafab
Apr 1 17:30:35 Ecos-Appliance kernel: usbcore: registered new interface
driver uss720
Apr 1 17:30:35 Ecos-Appliance kernel: uss720: v0.6:USB Parport Cable
driver for Cables using the Lucent Technologies USS720 Chip
Apr 1 17:30:35 Ecos-Appliance kernel: uss720: NOTE: this is a special
purpose driver to allow nonstandard
Apr 1 17:30:35 Ecos-Appliance kernel: uss720: protocols (eg. bitbang)
over USS720 usb to parallel cables
Apr 1 17:30:35 Ecos-Appliance kernel: uss720: If you just want to
connect to a printer, use usblp instead
Apr 1 17:30:35 Ecos-Appliance kernel: i8042: PNP: No PS/2 controller
found. Probing ports directly.
Apr 1 17:30:35 Ecos-Appliance kernel: tsc: Refined TSC clocksource
calibration: 2294.687 MHz
Apr 1 17:30:35 Ecos-Appliance kernel: i8042: No controller found
Apr 1 17:30:35 Ecos-Appliance kernel: mousedev: PS/2 mouse device
common for all mice
Apr 1 17:30:35 Ecos-Appliance kernel: md: linear personality registered
for level -1
Apr 1 17:30:35 Ecos-Appliance kernel: md: raid0 personality registered
for level 0
Apr 1 17:30:35 Ecos-Appliance kernel: md: raid1 personality registered
for level 1
Apr 1 17:30:35 Ecos-Appliance kernel: md: raid10 personality registered
for level 10
Apr 1 17:30:35 Ecos-Appliance kernel: md: raid6 personality registered
for level 6
Apr 1 17:30:35 Ecos-Appliance kernel: md: raid5 personality registered
for level 5
Apr 1 17:30:35 Ecos-Appliance kernel: md: raid4 personality registered
for level 4
Apr 1 17:30:35 Ecos-Appliance kernel: md: multipath personality
registered for level -4
Apr 1 17:30:35 Ecos-Appliance kernel: md: faulty personality registered
for level -5
Apr 1 17:30:35 Ecos-Appliance kernel: Intel P-state driver initializing.
Apr 1 17:30:35 Ecos-Appliance kernel: hv_vmbus: registering driver
hv_balloon
Apr 1 17:30:35 Ecos-Appliance kernel: GACT probability on
Apr 1 17:30:35 Ecos-Appliance kernel: Mirror/redirect action on
Apr 1 17:30:35 Ecos-Appliance kernel: u32 classifier
Apr 1 17:30:35 Ecos-Appliance kernel: Actions configured
Apr 1 17:30:35 Ecos-Appliance kernel: Netfilter messages via NETLINK v0.30.
Apr 1 17:30:35 Ecos-Appliance kernel: nfnl_acct: registering with
nfnetlink.
Apr 1 17:30:35 Ecos-Appliance kernel: nf_conntrack version 0.5.0 (16384
buckets, 65536 max)
Apr 1 17:30:35 Ecos-Appliance kernel: ctnetlink v0.93: registering with
nfnetlink.
Apr 1 17:30:35 Ecos-Appliance kernel: xt_time: kernel timezone is -0000
Apr 1 17:30:35 Ecos-Appliance kernel: ipip: IPv4 over IPv4 tunneling driver
Apr 1 17:30:35 Ecos-Appliance kernel: IPv4 over IPsec tunneling driver
Apr 1 17:30:35 Ecos-Appliance kernel: ip_tables: (C) 2000-2006
Netfilter Core Team
Apr 1 17:30:35 Ecos-Appliance kernel: ipt_CLUSTERIP: ClusterIP Version
0.8 loaded successfully
Apr 1 17:30:35 Ecos-Appliance kernel: arp_tables: (C) 2002 David S. Miller
Apr 1 17:30:35 Ecos-Appliance kernel: Initializing XFRM netlink socket
Apr 1 17:30:35 Ecos-Appliance kernel: NET: Registered protocol family 17
Apr 1 17:30:35 Ecos-Appliance kernel: NET: Registered protocol family 15
Apr 1 17:30:35 Ecos-Appliance kernel: l2tp_core: L2TP core driver, V2.0
Apr 1 17:30:35 Ecos-Appliance kernel: l2tp_ppp: PPPoL2TP kernel driver,
V2.0
Apr 1 17:30:35 Ecos-Appliance kernel: l2tp_ip: L2TP IP encapsulation
support (L2TPv3)
Apr 1 17:30:35 Ecos-Appliance kernel: l2tp_netlink: L2TP netlink interface
Apr 1 17:30:35 Ecos-Appliance kernel: l2tp_eth: L2TP ethernet
pseudowire support (L2TPv3)
Apr 1 17:30:35 Ecos-Appliance kernel: 8021q: 802.1Q VLAN Support v1.8
Apr 1 17:30:35 Ecos-Appliance kernel: Key type dns_resolver registered
Apr 1 17:30:35 Ecos-Appliance kernel: Using IPI No-Shortcut mode
Apr 1 17:30:35 Ecos-Appliance kernel: Loading compiled-in X.509
certificates
Apr 1 17:30:35 Ecos-Appliance kernel: Loaded X.509 cert 'ECOS
Technology GmbH: code-sign: 39902a39d84cec4e9d12ee1c71d865f0e25906e3'
Apr 1 17:30:35 Ecos-Appliance kernel: md: Waiting for all devices to be
available before autodetect
Apr 1 17:30:35 Ecos-Appliance kernel: md: If you don't use raid, use
raid=noautodetect
Apr 1 17:30:35 Ecos-Appliance kernel: md: Autodetecting RAID arrays.
Apr 1 17:30:35 Ecos-Appliance kernel: md: Scanned 0 and added 0 devices.
Apr 1 17:30:35 Ecos-Appliance kernel: md: autorun ...
Apr 1 17:30:35 Ecos-Appliance kernel: md: ... autorun DONE.
Apr 1 17:30:35 Ecos-Appliance kernel: RAMDISK: gzip image found at block 0
Apr 1 17:30:35 Ecos-Appliance kernel: VFS: Mounted root (ext2
filesystem) on device 1:0.
Apr 1 17:30:35 Ecos-Appliance kernel: random: linuxrc urandom read with
0 bits of entropy available
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-5: new high-speed USB
device number 2 using xhci_hcd
Apr 1 17:30:35 Ecos-Appliance kernel: usb 2-4: new SuperSpeed USB
device number 2 using xhci_hcd
Apr 1 17:30:35 Ecos-Appliance kernel: usb-storage 2-4:1.0: USB Mass
Storage device detected
Apr 1 17:30:35 Ecos-Appliance kernel: scsi host3: usb-storage 2-4:1.0
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-5: ep 0x81 - rounding
interval to 128 microframes, ep desc says 255 microframes
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-5: ep 0x2 - rounding
interval to 128 microframes, ep desc says 255 microframes
Apr 1 17:30:35 Ecos-Appliance kernel: usb-storage 1-5:1.0: USB Mass
Storage device detected
Apr 1 17:30:35 Ecos-Appliance kernel: scsi host4: usb-storage 1-5:1.0
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-8: new full-speed USB
device number 3 using xhci_hcd
Apr 1 17:30:35 Ecos-Appliance kernel: Switched to clocksource tsc
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-8: ep 0x81 - rounding
interval to 1024 microframes, ep desc says 2040 microframes
Apr 1 17:30:35 Ecos-Appliance kernel: hub 1-8:1.0: USB hub found
Apr 1 17:30:35 Ecos-Appliance kernel: hub 1-8:1.0: 3 ports detected
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-12: new full-speed USB
device number 4 using xhci_hcd
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-8.1: new full-speed USB
device number 5 using xhci_hcd
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-8.1: ep 0x81 - rounding
interval to 64 microframes, ep desc says 80 microframes
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-8.2: new full-speed USB
device number 6 using xhci_hcd
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-8.2: ep 0x81 - rounding
interval to 64 microframes, ep desc says 80 microframes
Apr 1 17:30:35 Ecos-Appliance kernel: usb 1-8.3: new full-speed USB
device number 7 using xhci_hcd
Apr 1 17:30:35 Ecos-Appliance kernel: scsi 3:0:0:0: Direct-Access
APPLE SD Card Reader 3.00 PQ: 0 ANSI: 6
Apr 1 17:30:35 Ecos-Appliance kernel: sd 3:0:0:0: [sdb] Attached SCSI
removable disk
Apr 1 17:30:35 Ecos-Appliance kernel: scsi 4:0:0:0: Direct-Access
JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 4
Apr 1 17:30:35 Ecos-Appliance kernel: sd 4:0:0:0: [sdc] 15826944
512-byte logical blocks: (8.10 GB/7.54 GiB)
Apr 1 17:30:35 Ecos-Appliance kernel: sd 4:0:0:0: [sdc] Write Protect
is off
Apr 1 17:30:35 Ecos-Appliance kernel: sd 4:0:0:0: [sdc] Mode Sense: 43
00 00 00
Apr 1 17:30:35 Ecos-Appliance kernel: sd 4:0:0:0: [sdc] No Caching mode
page found
Apr 1 17:30:35 Ecos-Appliance kernel: sd 4:0:0:0: [sdc] Assuming drive
cache: write through
Apr 1 17:30:35 Ecos-Appliance kernel: sdc: sdc1 sdc2 sdc3 sdc4 < sdc5
sdc6 sdc7 sdc8 >
Apr 1 17:30:35 Ecos-Appliance kernel: sd 4:0:0:0: [sdc] Attached SCSI
removable disk
Apr 1 17:30:35 Ecos-Appliance kernel: VFS: Mounted root (squashfs
filesystem) readonly on device 8:39.
Apr 1 17:30:35 Ecos-Appliance kernel: Trying to move old root to
/initrd ... /initrd does not exist. Ignored.
Apr 1 17:30:35 Ecos-Appliance kernel: Unmounting old root
Apr 1 17:30:35 Ecos-Appliance kernel: Trying to free ramdisk memory ...
failed
Apr 1 17:30:35 Ecos-Appliance kernel: Freeing unused kernel memory:
488K (c1706000 - c1780000)
Apr 1 17:30:35 Ecos-Appliance kernel: Write protecting the kernel text:
4860k
Apr 1 17:30:35 Ecos-Appliance kernel: Write protecting the kernel
read-only data: 1964k
Apr 1 17:30:36 Ecos-Appliance kernel: <30>systemd-udevd[1865]: starting
version 216
Apr 1 17:30:36 Ecos-Appliance kernel: Linux agpgart interface v0.103
Apr 1 17:30:36 Ecos-Appliance kernel: cfg80211: Calling CRDA to update
world regulatory domain
Apr 1 17:30:36 Ecos-Appliance kernel: input: bcm5974 as
/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/input/input4
Apr 1 17:30:36 Ecos-Appliance kernel: usbcore: registered new interface
driver bcm5974
Apr 1 17:30:36 Ecos-Appliance kernel: usbcore: registered new interface
driver usbhid
Apr 1 17:30:36 Ecos-Appliance kernel: usbhid: USB HID core driver
Apr 1 17:30:36 Ecos-Appliance kernel: [Firmware Bug]: ACPI(GFX0)
defines _DOD but not _DOS
Apr 1 17:30:36 Ecos-Appliance kernel: ACPI: Video Device [GFX0]
(multi-head: yes rom: yes post: no)
Apr 1 17:30:36 Ecos-Appliance kernel: acpi device:02: registered as
cooling_device8
Apr 1 17:30:36 Ecos-Appliance kernel: input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
Apr 1 17:30:36 Ecos-Appliance kernel: input: HID 05ac:820a as
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:05AC:820A.0003/input/input6
Apr 1 17:30:36 Ecos-Appliance kernel: input: Apple Inc. Apple Internal
Keyboard / Trackpad as
/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:05AC:0263.0001/input/input7
Apr 1 17:30:36 Ecos-Appliance kernel: hid-generic 0003:05AC:820A.0003:
input: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:14.0-8.1/input0
Apr 1 17:30:36 Ecos-Appliance kernel: apple 0003:05AC:0263.0001: input:
USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad]
on usb-0000:00:14.0-12/input0
Apr 1 17:30:36 Ecos-Appliance kernel: input: HID 05ac:820b as
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:05AC:820B.0004/input/input8
Apr 1 17:30:36 Ecos-Appliance kernel: hid-generic 0003:05AC:820B.0004:
input: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:14.0-8.2/input0
Apr 1 17:30:36 Ecos-Appliance kernel: apple 0003:05AC:0263.0002: device
has no listeners, quitting
Apr 1 17:30:36 Ecos-Appliance kernel: apple 0003:05AC:0263.0002: hw
start failed
Apr 1 17:30:36 Ecos-Appliance kernel: [drm] Initialized drm 1.1.0 20060810
Apr 1 17:30:36 Ecos-Appliance kernel: snd_hda_intel 0000:01:00.1:
enabling device (0000 -> 0002)
Apr 1 17:30:36 Ecos-Appliance kernel: snd_hda_intel 0000:01:00.1:
Disabling MSI
Apr 1 17:30:36 Ecos-Appliance kernel: snd_hda_intel 0000:01:00.1:
Handle VGA-switcheroo audio client
Apr 1 17:30:36 Ecos-Appliance kernel: snd_hda_intel 0000:00:1b.0: irq
34 for MSI/MSI-X
Apr 1 17:30:36 Ecos-Appliance kernel: wmi: Mapper loaded
Apr 1 17:30:36 Ecos-Appliance kernel: sound hdaudioC0D0: autoconfig:
line_outs=2 (0x12/0x13/0x0/0x0/0x0) type:speaker
Apr 1 17:30:36 Ecos-Appliance kernel: sound hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
Apr 1 17:30:36 Ecos-Appliance kernel: sound hdaudioC0D0: hp_outs=1
(0x10/0x0/0x0/0x0/0x0)
Apr 1 17:30:36 Ecos-Appliance kernel: sound hdaudioC0D0: mono:
mono_out=0x0
Apr 1 17:30:36 Ecos-Appliance kernel: sound hdaudioC0D0: dig-out=0x21/0x0
Apr 1 17:30:36 Ecos-Appliance kernel: sound hdaudioC0D0: inputs:
Apr 1 17:30:36 Ecos-Appliance kernel: sound hdaudioC0D0: Internal Mic=0x1c
Apr 1 17:30:36 Ecos-Appliance kernel: sound hdaudioC0D0: Mic=0x18
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau: unknown parameter
'nouveau.debug' ignored
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau: unknown parameter
'VBIOS' ignored
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau: unknown parameter
'drm.debug' ignored
Apr 1 17:30:36 Ecos-Appliance kernel: ACPI Warning:
\_SB_.PCI0.P0P2.GFX0._DSM: Argument #4 type mismatch - Found [Buffer],
ACPI requires [Package] (20140926/nsarguments-95)
Apr 1 17:30:36 Ecos-Appliance kernel: ACPI: \_SB_.PCI0.P0P2.GFX0:
failed to evaluate _DSM
Apr 1 17:30:36 Ecos-Appliance kernel: checking generic (80020000
640000) vs hw (80000000 10000000)
Apr 1 17:30:36 Ecos-Appliance kernel: fb: switching to nouveaufb from
EFI VGA
Apr 1 17:30:36 Ecos-Appliance kernel: Console: switching to colour
dummy device 80x25
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau 0000:01:00.0: enabling
device (0006 -> 0007)
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DEVICE][0000:01:00.0]
BOOT0 : 0x0e7290a2
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DEVICE][0000:01:00.0]
Chipset: GK107 (NVE7)
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DEVICE][0000:01:00.0]
Family : NVE0
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ VBIOS][0000:01:00.0]
checking PRAMIN for image...
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ VBIOS][0000:01:00.0]
... appears to be valid
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ VBIOS][0000:01:00.0]
using image from PRAMIN
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ VBIOS][0000:01:00.0]
BIT signature found
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ VBIOS][0000:01:00.0]
version 80.07.c7.04.01
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau 0000:01:00.0: irq 35 for
MSI/MSI-X
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ PMC][0000:01:00.0] MSI
interrupts enabled
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ PFB][0000:01:00.0] RAM
type: GDDR5
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ PFB][0000:01:00.0] RAM
size: 2048 MiB
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ PFB][0000:01:00.0]
ZCOMP: 0 tags
Apr 1 17:30:36 Ecos-Appliance kernel: wl: module license 'unspecified'
taints kernel.
Apr 1 17:30:36 Ecos-Appliance kernel: Disabling lock debugging due to
kernel taint
Apr 1 17:30:36 Ecos-Appliance kernel: eth0: Broadcom BCM43a0 802.11
Hybrid Wireless Controller 6.30.223.248 (r487574)
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ PTHERM][0000:01:00.0]
FAN control: none / external
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ PTHERM][0000:01:00.0]
fan management: automatic
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ PTHERM][0000:01:00.0]
internal sensor: yes
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ CLK][0000:01:00.0] 07:
core 270-405 MHz memory 838 MHz
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ CLK][0000:01:00.0] 0a:
core 270-925 MHz memory 1560 MHz
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ CLK][0000:01:00.0] 0e:
core 270-925 MHz memory 4000 MHz
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ CLK][0000:01:00.0] 0f:
core 270-925 MHz memory 5016 MHz
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ CLK][0000:01:00.0] --:
core 405 MHz memory 680 MHz
Apr 1 17:30:36 Ecos-Appliance kernel: [TTM] Zone kernel: Available
graphics memory: 442116 kiB
Apr 1 17:30:36 Ecos-Appliance kernel: [TTM] Zone highmem: Available
graphics memory: 855372 kiB
Apr 1 17:30:36 Ecos-Appliance kernel: [TTM] Initializing pool allocator
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] VRAM: 2048 MiB
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] GART: 1048576 MiB
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] TMDS table
version 2.0
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB version 4.0
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB outp 00:
04810fb6 0f230010
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB outp 01:
01821fd6 0f420020
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB outp 02:
01021f12 00020020
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB outp 03:
08832fc6 0f420010
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB outp 04:
08032f02 00020010
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB outp 05:
02843f62 00020010
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB conn 00:
00020047
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB conn 01:
02208146
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB conn 02:
01104246
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] DCB conn 03:
00410361
Apr 1 17:30:36 Ecos-Appliance kernel: [drm] Supports vblank timestamp
caching Rev 2 (21.10.2013).
Apr 1 17:30:36 Ecos-Appliance kernel: [drm] Driver supports precise
vblank timestamp query.
Apr 1 17:30:36 Ecos-Appliance kernel: nouveau [ DRM] MM: using
COPY for buffer copies
Apr 1 17:30:37 Ecos-Appliance kernel: nouveau [ DRM] allocated
2880x1800 fb: 0x80000, bo f4f5a400
Apr 1 17:30:37 Ecos-Appliance kernel: fbcon: nouveaufb (fb0) is primary
device
Apr 1 17:30:37 Ecos-Appliance kernel: Console: switching to colour
frame buffer device 360x112
Apr 1 17:30:37 Ecos-Appliance kernel: nouveau 0000:01:00.0: fb0:
nouveaufb frame buffer device
Apr 1 17:30:37 Ecos-Appliance kernel: nouveau 0000:01:00.0: registered
panic notifier
Apr 1 17:30:37 Ecos-Appliance kernel: [drm] Initialized nouveau 1.2.1
20120801 for 0000:01:00.0 on minor 0
Apr 1 17:30:40 Ecos-Appliance kernel: random: nonblocking pool is
initialized
Apr 1 17:30:43 Ecos-Appliance kernel: kjournald starting. Commit
interval 5 seconds
Apr 1 17:30:43 Ecos-Appliance kernel: EXT3-fs (sdc8): mounted
filesystem with ordered data mode
Apr 1 17:30:57 ThinClient kernel: nouveau E[ PDISP][0000:01:00.0]
00:0006:0f44: link training failed
###Syslog-uname
----------------------------------------------------------------------
Linux ThinClient 3.18.10-BB5000-mthc-R350 #3 SMP Fri Mar 27 14:16:35 CET
2015 i686 GNU/Linux
----------------------------------------------------------------------