upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Generic HID driver 0.41 (2.7.4)
USB communication driver 0.33
Fatal error: 'maxretry' is not a valid variable name for this driver.
Look in the man page or call this driver with -h for a list of
valid variable names and flags.
||/ Name Version Architecture Description
+++-==============-============-============-================================
ii nut-server 2.7.4-8 armhf network UPS tools - core system
The UPS is a CyberPower 1500VAAVR
On Sat, Oct 31, 2020 at 11:43 AM Charles Lepple <clepple at gmail.com>
wrote:
> On Oct 30, 2020, at 3:00 PM, bobby <architectofthefuture at
gmail.com> wrote:
> >
> > I installed NUT on my raspberry pi. I've been following this
tutorial:
> https://melgrubb.com/2016/12/11/rphs-v2-ups/. I am trying to use NUT to
> monitor my cyberpower UPS. I seem to have this problem though: upsc
> cyberpower at localhost Init SSL without certificate database Error: Driver
> not connected
> > Doing a status check on nut-server, I see the following: Can't
connect
> to UPS [cyberpower] (usbhid-ups-cyberpower): No such file or directory
>
> Just before starting nut-server (which needs to connect to a running
> driver), the article says to run "sudo upsdrvctl start". What did
that
> return?
>
> Also, for the benefit of others who come across this thread, please
> include a bit more detail on your setup. Since there's a good chance
you're
> running Raspbian, you can probably get the NUT version with `dpkg -l
> nut-server`.
>
> > _______________________________________________
> > Nut-upsuser mailing list
> > Nut-upsuser at alioth-lists.debian.net
> > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20201031/cbcd2c4f/attachment.html>