thr3ads.net - Nut upsuser - [Nut-upsuser] connection pb with blazer

If this information is useful, please help other people find it:
Share via:

MATHIEU Clement

2016-Oct-01 15:59 UTC

[Nut-upsuser] connection pb with blazer_usb with infusec UPS

Hello

i need your help regarding the following issue :

i have a hero touch ups from infosec. it is connected via USB to a raspberry pi
3.
i?ve configure ups.conf file as below

[HERO]
       driver = blazer_usb
       vendorid = 0665
       productid = 5161

either with
       port = auto
or 
       port = /dev/hidraw0
or
      port = /dev/ttySo
   
the connection never works

i get the following log from command line :
sudo /lib/nut/blazer_usb -a HERO -DDD -u root
Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.2)
   0.000000	debug level is '3'
   0.003947	Checking device (0665/5161) (001/116)
   0.016760	- VendorID: 0665
   0.017245	- ProductID: 5161
   0.017686	- Manufacturer: INNO TECH
   0.018127	- Product: USB to Serial
   0.018598	- Serial Number: unknown
   0.019086	- Bus: 001
   0.019540	Trying to match device
   0.020136	Device matches
   0.020655	failed to claim USB device: could not claim interface 0: Device or
resource busy
   0.021625	detached kernel driver from USB device...
   0.022676	Trying megatec protocol...
   0.025291	send: Q1
   0.153928	read: N
   0.154751	blazer_status: short reply
   0.155441	Status read 1 failed
   0.156783	send: Q1
   0.286922	read: N
   0.287605	blazer_status: short reply
   0.288335	Status read 2 failed
   0.289796	send: Q1
   0.419969	read: N
   0.420052	blazer_status: short reply
   0.420081	Status read 3 failed
   0.420107	Trying mustek protocol...
   0.420818	send: QS
   1.654899	read: could not claim interface 0: Device or resource busy
   1.655782	blazer_status: short reply
   1.656445	Status read 1 failed
   1.657598	send: QS
   2.891901	read: could not claim interface 0: Device or resource busy
   2.892810	blazer_status: short reply
   2.893497	Status read 2 failed
   2.894755	send: QS
   4.129250	read: could not claim interface 0: Device or resource busy
   4.129411	blazer_status: short reply
   4.129503	Status read 3 failed
   4.129590	Trying megatec/old protocol...
   4.130286	send: D
   4.254420	read: N
   4.254520	blazer_status: short reply
   4.254608	Status read 1 failed
   4.255296	send: D
   4.379452	read: N
   4.379601	blazer_status: short reply
   4.379692	Status read 2 failed
   4.380447	send: D
   4.504477	read: N
   4.504631	blazer_status: short reply
   4.504725	Status read 3 failed
   4.504812	Trying zinto protocol...
   4.505581	send: Q1
   4.635465	read: N
   4.635565	blazer_status: short reply
   4.635654	Status read 1 failed
   4.636344	send: Q1
   4.766481	read: N
   4.766580	blazer_status: short reply
   4.766668	Status read 2 failed
   4.767360	send: Q1
   4.897519	read: N
   4.897659	blazer_status: short reply
   4.897749	Status read 3 failed
   4.897835	No supported UPS detected
any idea ?
thanks a lot

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20161001/50376108/attachment.html>

hyouko at gmail.com

2016-Oct-02 21:29 UTC

head link

[Nut-upsuser] connection pb with blazer_usb with infusec UPS

2016-10-01 17:59 GMT+02:00 MATHIEU Clement <clement.mathieu at
gmail.com>:> Hello
>
> i need your help regarding the following issue :
>
> i have a hero touch ups from infosec. it is connected via USB to a
raspberry
> pi 3.
> i?ve configure ups.conf file as below
>
> [HERO]
>        driver = blazer_usb
>        vendorid = 0665
>        productid = 5161
>
> either with
>        port = auto
> or
>        port = /dev/hidraw0
> or
>       port = /dev/ttySo
>
> the connection never works
The 'blazer_usb' driver (like others based on libusb) don't actually
use the 'port' argument, but, since it is still required by NUT, you
should set it to 'auto'.
>
> i get the following log from command line :
> sudo /lib/nut/blazer_usb -a HERO -DDD -u root
> Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.2)
>    0.000000 debug level is '3'
>    0.003947 Checking device (0665/5161) (001/116)
>    0.016760 - VendorID: 0665
>    0.017245 - ProductID: 5161
>    0.017686 - Manufacturer: INNO TECH
>    0.018127 - Product: USB to Serial
>    0.018598 - Serial Number: unknown
>    0.019086 - Bus: 001
>    0.019540 Trying to match device
>    0.020136 Device matches
>    0.020655 failed to claim USB device: could not claim interface 0: Device
> or resource busy
>    0.021625 detached kernel driver from USB device...
>    0.022676 Trying megatec protocol...
>    0.025291 send: Q1
>    0.153928 read: N
>    0.154751 blazer_status: short reply
>    0.155441 Status read 1 failed
>    0.156783 send: Q1
>    0.286922 read: N
>    0.287605 blazer_status: short reply
>    0.288335 Status read 2 failed
>    0.289796 send: Q1
>    0.419969 read: N
>    0.420052 blazer_status: short reply
>    0.420081 Status read 3 failed
>    0.420107 Trying mustek protocol...
>    0.420818 send: QS
>    1.654899 read: could not claim interface 0: Device or resource busy
>    1.655782 blazer_status: short reply
>    1.656445 Status read 1 failed
>    1.657598 send: QS
>    2.891901 read: could not claim interface 0: Device or resource busy
>    2.892810 blazer_status: short reply
>    2.893497 Status read 2 failed
>    2.894755 send: QS
>    4.129250 read: could not claim interface 0: Device or resource busy
>    4.129411 blazer_status: short reply
>    4.129503 Status read 3 failed
>    4.129590 Trying megatec/old protocol...
>    4.130286 send: D
>    4.254420 read: N
>    4.254520 blazer_status: short reply
>    4.254608 Status read 1 failed
>    4.255296 send: D
>    4.379452 read: N
>    4.379601 blazer_status: short reply
>    4.379692 Status read 2 failed
>    4.380447 send: D
>    4.504477 read: N
>    4.504631 blazer_status: short reply
>    4.504725 Status read 3 failed
>    4.504812 Trying zinto protocol...
>    4.505581 send: Q1
>    4.635465 read: N
>    4.635565 blazer_status: short reply
>    4.635654 Status read 1 failed
>    4.636344 send: Q1
>    4.766481 read: N
>    4.766580 blazer_status: short reply
>    4.766668 Status read 2 failed
>    4.767360 send: Q1
>    4.897519 read: N
>    4.897659 blazer_status: short reply
>    4.897749 Status read 3 failed
>    4.897835 No supported UPS detected
> any idea ?
This seems like something that might be supported by 'nutdrv_qx'
driver with 'voltronic-qs-hex' protocol, an early version of which is
part of the 2.7.3 release, while an improved version with support for
more devices is available in 2.7.4. If possible, give it a try.

hyouko at gmail.com

2016-Oct-09 22:20 UTC

head link

[Nut-upsuser] connection pb with blazer_usb with infusec UPS

Please keep the list CC'd, thanks.

2016-10-07 8:54 GMT+02:00 MATHIEU Clement <clement.mathieu at
gmail.com>:> Hello
> thanks for your answer
> i?ve tried with nutdrv_qx driver
> and i got this result
>
> lsusb :
>
> Bus 001 Device 058: ID 0665:5161 Cypress Semiconductor USB to Serial
> Bus 001 Device 005: ID 13ee:0001 MosArt
> Bus 001 Device 004: ID 0a81:0101 Chesen Electronics Corp. Keyboard
> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514
> Fast Ethernet Adapter
> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> sudo /lib/nut/nutdrv_qx -a HERO -DDD -u root
>
> Network UPS Tools - Generic Q* USB/Serial driver 0.06 (2.7.2)
> USB communication driver 0.32
>    0.000000 debug level is '3'
>    0.002329 upsdrv_initups...
>    0.003541 Checking device (0665/5161) (001/036)
>    0.014412 - VendorID: 0665
>    0.014521 - ProductID: 5161
>    0.014608 - Manufacturer: INNO TECH
>    0.014697 - Product: USB to Serial
>    0.014783 - Serial Number: unknown
>    0.014875 - Bus: 001
>    0.014961 Trying to match device
>    0.015172 Device matches
>    0.015305 failed to claim USB device: could not claim interface 0: Device
> or resource busy
>    0.015942 detached kernel driver from USB device...
>    0.017534 send: QGS
>    0.152570 read: N
>    0.153407 qx_process_answer: short reply (input.voltage)
>    0.154812 send: QGS
>    0.289577 read: N
>    0.290254 qx_process_answer: short reply (input.voltage)
>    0.291575 send: QGS
>    0.426589 read: N
>    0.427286 qx_process_answer: short reply (input.voltage)
>    0.428596 send: M
>    0.552624 read: P
>    0.553499 voltronic_qs_protocol: invalid protocol [P]
>    0.554862 send: M
>    0.678625 read: P
>    0.679343 voltronic_qs_protocol: invalid protocol [P]
>    0.680625 send: M
>    0.804641 read: P
>    0.805347 voltronic_qs_protocol: invalid protocol [P]
>    0.806638 send: QS
>    2.041443 read: could not claim interface 0: Device or resource busy
>    2.042383 qx_process_answer: short reply (input.voltage)
>    2.043674 send: QS
>    3.277104 read: could not claim interface 0: Device or resource busy
>    3.277275 qx_process_answer: short reply (input.voltage)
>    3.277954 send: QS
>    4.512612 read: could not claim interface 0: Device or resource busy
>    4.512787 qx_process_answer: short reply (input.voltage)
>    4.513487 send: D
>    4.638121 read: N
>    4.638259 qx_process_answer: short reply (input.voltage)
>    4.638996 send: D
>    4.763133 read: N
>    4.763241 qx_process_answer: short reply (input.voltage)
>    4.764012 send: D
>    4.888154 read: N
>    4.888259 qx_process_answer: short reply (input.voltage)
>    4.889028 send: Q1
>    5.019190 read: N
>    5.019383 qx_process_answer: short reply (input.voltage)
>    5.020180 send: Q1
>    5.150184 read: N
>    5.150289 qx_process_answer: short reply (input.voltage)
>    5.151061 send: Q1
>    5.281199 read: N
>    5.281306 qx_process_answer: short reply (input.voltage)
>    5.282077 send: Q1
>    5.412245 read: N
>    5.412437 qx_process_answer: short reply (input.voltage)
>    5.413234 send: Q1
>    5.543247 read: N
>    5.544118 qx_process_answer: short reply (input.voltage)
>    5.545492 send: Q1
>    5.675251 read: N
>    5.675956 qx_process_answer: short reply (input.voltage)
>    5.677259 send: Q1
>    5.807269 read: N
>    5.808067 qx_process_answer: short reply (input.voltage)
>    5.809396 send: Q1
>    5.939284 read: N
>    5.939965 qx_process_answer: short reply (input.voltage)
>    5.941293 send: Q1
>    6.071312 read: N
>    6.072170 qx_process_answer: short reply (input.voltage)
>    6.073557 send: Q1
>    6.203318 read: N
>    6.204040 qx_process_answer: short reply (input.voltage)
>    6.205327 send: Q1
>    6.335336 read: N
>    6.336029 qx_process_answer: short reply (input.voltage)
>    6.337338 send: Q1
>    6.467375 read: N
>    6.468330 qx_process_answer: short reply (input.voltage)
>    6.469048 Device not supported!
>    6.469736 Device not supported!
>
> any idea ?
The reply ('P') to the 'M' query seems to confirm my belief that
this
device might be supported by 'nutdrv_qx' driver with
'voltronic-qs-hex' protocol.
>
> how do you install from repository ver 2.7.4. ?
Well, if you want the most recent source, you can either start from
our Git tree, or use the tarball snapshots from our Buildbot (see
http://networkupstools.org/download.html ), then follow our user
manual ( http://networkupstools.org/docs/user-manual.chunked/ar01s05.html
- some steps are not needed if you already have NUT installed, just be
sure to use compatible configure/install options).
>
> i?v also tried with combo  06da/ffff.
> it does not work?
> thanks

Apparently Analagous Threads

Search for more seemingly similar threads

Nut upsuser - Oct 2016 - connection pb with blazer_usb with infusec UPS

[Nut-upsuser] connection pb with blazer_usb with infusec UPS

[Nut-upsuser] connection pb with blazer_usb with infusec UPS

[Nut-upsuser] connection pb with blazer_usb with infusec UPS

Apparently Analagous Threads