I have the following configuration... [aor3] type = aor max_contacts = 1 remove_existing = yes [auth3] type = auth username = 1004 password = SuperSecretProbation [1004] type = endpoint context = IS transport = transport1 auth = auth3 aors = aor3 accountcode = 3 dtmf_mode = rfc4733 device_state_busy_at = 2 force_rport = no moh_passthrough = yes disallow = all allow = ulaw acl = acl1 When a register attempt is received, asterisk outputs... [02/14 12:53:29.870] WARNING[7883] res_pjsip_registrar.c: AOR '1004' not found for endpoint '1004' If I change the aor3 to be 1004, everything works. As in [aor3] becomes [1004] and in the endpoint change aors = aor3 to be aors = 1004 Is there a setting I'm missing to allow the endpoint named 1004 to use an auth that doesn't have the same 1004 name? Dan -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20200214/a448dc49/attachment.html>
On Fri, Feb 14, 2020 at 3:04 PM Dan Cropp <dan at amtelco.com> wrote:> I have the following configuration… > > > > [aor3] > > type = aor > > max_contacts = 1 > > remove_existing = yes > > > > [auth3] > > type = auth > > username = 1004 > > password = SuperSecretProbation > > > > [1004] > > type = endpoint > > context = IS > > transport = transport1 > > auth = auth3 > > aors = aor3 > > accountcode = 3 > > dtmf_mode = rfc4733 > > device_state_busy_at = 2 > > force_rport = no > > moh_passthrough = yes > > disallow = all > > allow = ulaw > > acl = acl1 > > > > > > When a register attempt is received, asterisk outputs… > > [02/14 12:53:29.870] WARNING[7883] res_pjsip_registrar.c: AOR '1004' not > found for endpoint '1004' > > > > If I change the aor3 to be 1004, everything works. As in [aor3] becomes > [1004] and in the endpoint change aors = aor3 to be aors = 1004 > Is there a setting I’m missing to allow the endpoint named 1004 to use an > auth that doesn’t have the same 1004 name? >There isn't a configuration option. AOR is a SIP concept, and in fact when you send a REGISTER you state which AOR you are registering to. Your REGISTER is therefore saying "add me to AOR 1004". Since it's not saying "add me to aor3" it doesn't work. Some devices allow you to specify while others just assume that everything uses your username. -- Joshua C. Colp Asterisk Technical Lead Sangoma Technologies Check us out at www.sangoma.com and www.asterisk.org -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20200214/6d6aef84/attachment.html>
Thanks Joshua From: asterisk-users <asterisk-users-bounces at lists.digium.com> On Behalf Of Joshua C. Colp Sent: Friday, February 14, 2020 1:09 PM To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Subject: Re: [asterisk-users] Question on pjsip.conf and aors On Fri, Feb 14, 2020 at 3:04 PM Dan Cropp <dan at amtelco.com<mailto:dan at amtelco.com>> wrote: I have the following configuration… [aor3] type = aor max_contacts = 1 remove_existing = yes [auth3] type = auth username = 1004 password = SuperSecretProbation [1004] type = endpoint context = IS transport = transport1 auth = auth3 aors = aor3 accountcode = 3 dtmf_mode = rfc4733 device_state_busy_at = 2 force_rport = no moh_passthrough = yes disallow = all allow = ulaw acl = acl1 When a register attempt is received, asterisk outputs… [02/14 12:53:29.870] WARNING[7883] res_pjsip_registrar.c: AOR '1004' not found for endpoint '1004' If I change the aor3 to be 1004, everything works. As in [aor3] becomes [1004] and in the endpoint change aors = aor3 to be aors = 1004 Is there a setting I’m missing to allow the endpoint named 1004 to use an auth that doesn’t have the same 1004 name? There isn't a configuration option. AOR is a SIP concept, and in fact when you send a REGISTER you state which AOR you are registering to. Your REGISTER is therefore saying "add me to AOR 1004". Since it's not saying "add me to aor3" it doesn't work. Some devices allow you to specify while others just assume that everything uses your username. -- Joshua C. Colp Asterisk Technical Lead Sangoma Technologies Check us out at www.sangoma.com<http://www.sangoma.com> and www.asterisk.org<http://www.asterisk.org> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20200214/6704c5b7/attachment.html>
Reasonably Related Threads
- Question on pjsip.conf and aors
- PJSIP Endpoint AOR question
- PJSIP Endpoint AOR question
- PJSIP Endpoint AOR question
- Is it possible to have two endpoints to the same IP address where one uses IP based authentication and the other requires asterisk to register to that system?