thr3ads.net - asterisk users - [asterisk-users] PJSIP does not qualify contacts after starting Asterisk [Jun 2016]

If this information is useful, please help other people find it:
Share via:

Francisco Valentin Vinagrero

2016-Jun-13 08:21 UTC

[asterisk-users] PJSIP does not qualify contacts after starting Asterisk

Hi all,
(sending this again from the correct address)

I'm running Asterisk 13.8.0 (I need to check if that happens with 13.9.1 too
when I have the time to build it) with PJSIP realtime config.

I've defined several aors in the table ps_aors, like this (real url replaced
by myurl):

*CLI> pjsip show aor pbx-node-1

      Aor:  <Aor..............................................> 
<MaxContact>
    Contact:  <Aor/ContactUri............................>
<Hash....> <Status> <RTT(ms)..>
 ========================================================================================
      Aor:  pbx-node-1                                           0
    Contact:  pbx-node-1/sip:myurl:5060      771bf6a7d4 Created       0.000


 ParameterName        : ParameterValue
 ================================================== authenticate_qualify : false
 contact              : sip:myurl:5060
 default_expiration   : 3600
 mailboxes            :
 max_contacts         : 0
 maximum_expiration   : 7200
 minimum_expiration   : 60
 outbound_proxy       : sip:myurl:5060
 qualify_frequency    : 30
 qualify_timeout      : 3.000000
 remove_existing      : false
 support_path         : false



So I think that those aors should be qualified automatically when I run
Asterisk, but if I do "pjsip show contacts", I get that it was just
Created but not qualified:


*CLI> pjsip show contacts

  Contact:  <Aor/ContactUri..............................>
<Hash....> <Status> <RTT(ms)..>
========================================================================================
Contact:  pbx-node-1/sip:myurl:5060        771bf6a7d4 Created       0.000


And not a single OPTIONS message if I take a trace...


If I want Asterisk to start sending OPTIONS, I need to do pjsip reload and after
that, they are qualified and their status changes dynamically:

*CLI> pjsip show contacts

  Contact:  <Aor/ContactUri..............................>
<Hash....> <Status> <RTT(ms)..>
========================================================================================
Contact:  pbx-node-1/sip:myurl.ch:5060        771bf6a7d4 Avail         8.833



The extconfig.conf file looks like this:

[settings]
ps_endpoints => odbc,asterisk
ps_auths => odbc,asterisk
ps_aors => odbc,asterisk
ps_domain_aliases => odbc,asterisk
ps_endpoint_id_ips => odbc,asterisk
ps_contacts => odbc,asterisk
extensions => odbc,asterisk



Any idea why I need to reload PJSIP if I want the aors to be qualified?

Cheers, Francisco.


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20160613/90c987ba/attachment.html>

Annus Fictus

2016-Jun-13 12:11 UTC

head link

[asterisk-users] PJSIP does not qualify contacts after starting Asterisk

Hello Francisco,

you have to use:

extensions => odbc,asterisk

only if you want use dialplan in Realtime

can you share your sorcery.conf file?

Regards

El 13/06/2016 a las 10:21, Francisco Valentin Vinagrero
escribi?:>
> Hi all,
>
> (sending this again from the correct address)
>
> I?m running Asterisk 13.8.0 (I need to check if that happens with 
> 13.9.1 too when I have the time to build it) with PJSIP realtime config.
>
> I?ve defined several aors in the table ps_aors, like this (real url 
> replaced by myurl):
>
> *CLI> pjsip show aor pbx-node-1
>
>       Aor: <Aor..............................................> 
> <MaxContact>
>
>     Contact: <Aor/ContactUri............................>
<Hash....>
> <Status> <RTT(ms)..>
>
> 
=========================================================================================
>
>
>       Aor: pbx-node-1 0
>
>     Contact: pbx-node-1/sip:myurl:5060      771bf6a7d4 Created 0.000
>
>  ParameterName        : ParameterValue
>
>  ==================================================>
>  authenticate_qualify : false
>
>  contact              : sip:myurl:5060
>
> default_expiration : 3600
>
>  mailboxes :
>
>  max_contacts : 0
>
> maximum_expiration   : 7200
>
>  minimum_expiration   : 60
>
>  outbound_proxy       : sip:myurl:5060
>
>  qualify_frequency    : 30
>
>  qualify_timeout      : 3.000000
>
>  remove_existing      : false
>
>  support_path         : false
>
> So I think that those aors should be qualified automatically when I 
> run Asterisk, but if I do ?/pjsip show contacts?/, I get that it was 
> just Created but not qualified:
>
> *CLI> pjsip show contacts
>
>   Contact: <Aor/ContactUri..............................>
<Hash....>
> <Status> <RTT(ms)..>
>
>
========================================================================================>
>   Contact: pbx-node-1/sip:myurl:5060        771bf6a7d4 Created 0.000
>
> And not a single OPTIONS message if I take a trace?
>
> If I want Asterisk to start sending OPTIONS, I need to do pjsip reload 
> and after that, they are qualified and their status changes dynamically:
>
> *CLI> pjsip show contacts
>
>   Contact: <Aor/ContactUri..............................>
<Hash....>
> <Status> <RTT(ms)..>
>
>
========================================================================================>
>   Contact: pbx-node-1/sip:myurl.ch:5060        771bf6a7d4 Avail 8.833
>
> The extconfig.conf file looks like this:
>
> [settings]
>
> ps_endpoints => odbc,asterisk
>
> ps_auths => odbc,asterisk
>
> ps_aors => odbc,asterisk
>
> ps_domain_aliases => odbc,asterisk
>
> ps_endpoint_id_ips => odbc,asterisk
>
> ps_contacts => odbc,asterisk
>
> extensions => odbc,asterisk
>
> Any idea why I need to reload PJSIP if I want the aors to be qualified?
>
> Cheers, Francisco.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20160613/1695e33d/attachment.html>

Francisco Valentin Vinagrero

2016-Jun-13 12:16 UTC

head link

[asterisk-users] PJSIP does not qualify contacts after starting Asterisk

Hi,

Yes, we're implementing the dialplan in realtime too.

Here the contents of sorcery.conf:

[res_pjsip]
endpoint=realtime,ps_endpoints
aor=realtime,ps_aors
contact=realtime,ps_contacts

[res_pjsip_endpoint_identifier_ip]
identify=realtime,ps_endpoint_id_ips


Cheers, Francisco.

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces
at lists.digium.com] On Behalf Of Annus Fictus
Sent: 13 June 2016 14:11
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users
at lists.digium.com>
Subject: Re: [asterisk-users] PJSIP does not qualify contacts after starting
Asterisk


Hello Francisco,

you have to use:

extensions => odbc,asterisk

only if you want use dialplan in Realtime

can you share your sorcery.conf file?

Regards
El 13/06/2016 a las 10:21, Francisco Valentin Vinagrero escribi?:
Hi all,
(sending this again from the correct address)

I'm running Asterisk 13.8.0 (I need to check if that happens with 13.9.1 too
when I have the time to build it) with PJSIP realtime config.

I've defined several aors in the table ps_aors, like this (real url replaced
by myurl):

*CLI> pjsip show aor pbx-node-1

      Aor:  <Aor..............................................> 
<MaxContact>
    Contact:  <Aor/ContactUri............................>
<Hash....> <Status> <RTT(ms)..>
 ========================================================================================
      Aor:  pbx-node-1                                           0
    Contact:  pbx-node-1/sip:myurl:5060      771bf6a7d4 Created       0.000


 ParameterName        : ParameterValue
 ================================================== authenticate_qualify : false
 contact              : sip:myurl:5060
 default_expiration   : 3600
 mailboxes            :
 max_contacts         : 0
 maximum_expiration   : 7200
 minimum_expiration   : 60
 outbound_proxy       : sip:myurl:5060
 qualify_frequency    : 30
 qualify_timeout      : 3.000000
 remove_existing      : false
 support_path         : false



So I think that those aors should be qualified automatically when I run
Asterisk, but if I do "pjsip show contacts", I get that it was just
Created but not qualified:


*CLI> pjsip show contacts

  Contact:  <Aor/ContactUri..............................>
<Hash....> <Status> <RTT(ms)..>
========================================================================================
Contact:  pbx-node-1/sip:myurl:5060        771bf6a7d4 Created       0.000


And not a single OPTIONS message if I take a trace...


If I want Asterisk to start sending OPTIONS, I need to do pjsip reload and after
that, they are qualified and their status changes dynamically:

*CLI> pjsip show contacts

  Contact:  <Aor/ContactUri..............................>
<Hash....> <Status> <RTT(ms)..>
========================================================================================
Contact:  pbx-node-1/sip:myurl.ch:5060        771bf6a7d4 Avail         8.833



The extconfig.conf file looks like this:

[settings]
ps_endpoints => odbc,asterisk
ps_auths => odbc,asterisk
ps_aors => odbc,asterisk
ps_domain_aliases => odbc,asterisk
ps_endpoint_id_ips => odbc,asterisk
ps_contacts => odbc,asterisk
extensions => odbc,asterisk



Any idea why I need to reload PJSIP if I want the aors to be qualified?

Cheers, Francisco.





-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20160613/577b00d8/attachment.html>

Seemingly Similar Threads

Search for more possibly parallel threads

asterisk users - Jun 2016 - PJSIP does not qualify contacts after starting Asterisk

[asterisk-users] PJSIP does not qualify contacts after starting Asterisk

[asterisk-users] PJSIP does not qualify contacts after starting Asterisk

[asterisk-users] PJSIP does not qualify contacts after starting Asterisk

Seemingly Similar Threads