Hello nuters,
FreeBSD, Ellipse USBS 800, serial line, nut 2.02 everything works fine.
But I'm only able to get an automatic shutdown when reaching the
built-in 30% level. I the "lowbatt parameter" is set to anything,
it's simply ignored.
This is a problem as I want to shutdown around 90% to avoid the
battery to drain out when multiple shutdowns occur.
Any idea ?
Fran?ois
Here is the situation :
-bash-2.05b$ sudo /usr/local/ups/bin/upsc ups_tamiaserver@localhost
battery.charge: 82
battery.charge.low: 30
battery.runtime: 01406
driver.flag.nolock: enabled
driver.name: mge-shut
driver.parameter.lowbatt: 90
driver.parameter.notification: 3
driver.parameter.offdelay: 60
driver.parameter.ondelay: 9
driver.parameter.pollinterval: 15
driver.parameter.port: /dev/cuaa0
driver.version: 2.0.2
driver.version.internal: 0.64
outlet.0.desc: Main Outlet
outlet.0.id: 1
outlet.0.switchable: 0
outlet.1.autoswitch.charge.low: 0
outlet.1.desc: PowerShare Outlet 1
outlet.1.id: 2
outlet.1.switch: 1
outlet.1.switchable: 0
output.voltage: 230
ups.delay.shutdown: -1
ups.delay.start: -1
ups.load: 26
ups.mfr: MGE UPS SYSTEMS
ups.model: ellipse 800
ups.power.nominal: 800
ups.serial: unknown
ups.status: OB DISCHRG
Here is the mge.conf relevant part :
=================================== user = nut
driverpath = /usr/local/ups/bin
pollinterval = 15
[ups_tamiaserver]
driver = mge-shut
port = /dev/cuaa0
desc = "MGE Ellipse 800 du Tamiaserver"
lowbatt = 90
offdelay = 60
ondelay = 9
nolock
notification = 3
====================================
