thr3ads.net - samba - [Samba] NT_STATUS_CONNECTION_REFUSED with smbclient and samba 4.0.6 [Sep 2013]

If this information is useful, please help other people find it:
Share via:

GUEI née worou noee

2013-Sep-03 15:55 UTC

[Samba] NT_STATUS_CONNECTION_REFUSED with smbclient and samba 4.0.6

Hello,
I'm trying to install samba 4 as a DC following this tutorial 
https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO.

Ihave reached the step of testing the connectivity to the DC with smbclient

[root at DC-TEST ~]#  /usr/local/samba/bin/smbclient -L localhost -U%
session setup failed: NT_STATUS_CONNECTION_REFUSED

Samba 4 has started successfully

[root at DC-TEST ~]# netstat -lntp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address               Foreign Address            
State       PID/Program name
tcp        0      0 0.0.0.0:139                 0.0.0.0:*                  
LISTEN      1906/smbd
tcp        0      0 0.0.0.0:111                 0.0.0.0:*                  
LISTEN      1160/rpcbind
tcp        0      0 0.0.0.0:51505               0.0.0.0:*                  
LISTEN      1178/rpc.statd
tcp        0      0 0.0.0.0:22                  0.0.0.0:*                  
LISTEN      1261/sshd
tcp        0      0 0.0.0.0:445                 0.0.0.0:*                  
LISTEN      1906/smbd
tcp        0      0 :::139                      :::*                       
LISTEN      1906/smbd
tcp        0      0 :::111                      :::*                       
LISTEN      1160/rpcbind
tcp        0      0 :::22                       :::*                       
LISTEN      1261/sshd
tcp        0      0 :::445                      :::*                       
LISTEN      1906/smbd
tcp        0      0 :::46598                    :::*                       
LISTEN      1178/rpc.statd

Here is an output af smbclient in debbuging mode

[root at DC-TEST ~]#  /usr/local/samba/bin/smbclient -d8 -L localhost -U%
INFO: Current debug levels:
all: 8
tdb: 8
printdrivers: 8
lanman: 8
smb: 8
rpc_parse: 8
rpc_srv: 8
rpc_cli: 8
passdb: 8
sam: 8
auth: 8
winbind: 8
vfs: 8
idmap: 8
quota: 8
acls: 8
locking: 8
msdfs: 8
dmapi: 8
registry: 8
lp_load_ex: refreshing parameters
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
INFO: Current debug levels:
all: 8
tdb: 8
printdrivers: 8
lanman: 8
smb: 8
rpc_parse: 8
rpc_srv: 8
rpc_cli: 8
passdb: 8
sam: 8
auth: 8
winbind: 8
vfs: 8
idmap: 8
quota: 8
acls: 8
locking: 8
msdfs: 8
dmapi: 8
registry: 8
params.c:pm_process() - Processing configuration file
"/usr/local/samba/etc/smb.conf"
Processing section "[global]"
doing parameter workgroup = SIEGE
doing parameter realm = bceao.int
doing parameter netbios name = Z00-DC01
doing parameter server role = active directory domain controller
doing parameter idmap_ldb:use rfc2307 = yes
doing parameter logfile = /usr/local/samba/log/samba.log
doing parameter wins support = yes
doing parameter hosts allow = 10.67.200.
doing parameter load printers = no
pm_process() returned Yes
lp_servicenumber: couldn't find homes
added interface eth0 ip=10.67.200.22 bcast=10.67.200.255 netmask=255.255.255.0
added interface eth1 ip=10.185.200.68 bcast=10.185.201.255 netmask=255.255.254.0
Netbios name list:-
my_netbios_names[0]="Z00-DC01"
Client started (version 4.0.6).
Opening cache file at /usr/local/samba/var/lock/gencache.tdb
Opening cache file at /usr/local/samba/var/lock/gencache_notrans.tdb
sitename_fetch: No stored sitename for BCEAO.INT
name localhost#20 found.
Connecting to 127.0.0.1 at port 445
Socket options:
SO_KEEPALIVE = 0
SO_REUSEADDR = 0
SO_BROADCAST = 0
TCP_NODELAY = 1
TCP_KEEPCNT = 9
TCP_KEEPIDLE = 7200
TCP_KEEPINTVL = 75
IPTOS_LOWDELAY = 0
IPTOS_THROUGHPUT = 0
SO_SNDBUF = 50748
SO_RCVBUF = 87584
SO_SNDLOWAT = 1
SO_RCVLOWAT = 1
SO_SNDTIMEO = 0
SO_RCVTIMEO = 0
TCP_QUICKACK = 1
TCP_DEFER_ACCEPT = 0
session request ok
session setup failed: NT_STATUS_CONNECTION_REFUSED

Here is the smb.conf file's content

# Global parameters
[global]
workgroup = SIEGE
realm = bceao.int
netbios name = Z00-DC01
server role = active directory domain controller
#dcerpc endpoint  servers = remote
idmap_ldb:use rfc2307 = yes
logfile = /usr/local/samba/log/samba.log
wins support = yes
hosts allow = 10.67.200.
load printers = no

[netlogon]
path = /usr/local/samba/var/locks/sysvol/bceao.int/scripts
read only = No

[sysvol]
path = /usr/local/samba/var/locks/sysvol
read only = No
[test]
path = /var
read only = No
Please may have have you're help
NB : the smbclient's version is 4.0.6 


MMe GUEI NOEE MELAINE
BP 3108 DAKAR SENEGAL
SERVICE INFORMATIQUE

Marc Muehlfeld

2013-Sep-04 05:25 UTC

head link

[Samba] NT_STATUS_CONNECTION_REFUSED with smbclient and samba 4.0.6

Hello,

Am 03.09.2013 17:55, schrieb GUEI n?e worou noee:> I'm trying to install samba 4 as a DC following this tutorial
> https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO.
 > ...> Samba 4 has started successfully

Your netstat output doesn't look like a successfull start. Here is a 
list of tcp/udp ports, that should be listening, when Samba is fully up:

http://wiki.samba.org/index.php/Samba_port_usage#Port_usage_when_Samba_runs_as_DC

As I only see smbd processes and no "samba" process listening on any 
port: Did you start "samba", like said in the HowTo, or
"smbd"?

Is Samba self compiled or a package from somewhere?

What are the Samba logs saying?


Regards,
Marc

George Itee

2013-Sep-04 05:29 UTC

head link

[Samba] NT_STATUS_CONNECTION_REFUSED with smbclient and samba 4.0.6

Hello,

When I got that error, it was because portreserve was holding port 636 and
samba cannot bind to it. Go to /etc/portreserve and delete the file slapd.
Restart the portreserve service and samba as well. May require a full
restart, but should work.

Hope it helps !

George

Sent via Android Mobile Device
On Sep 3, 2013 6:55 PM, "GUEI n?e worou noee" <wnoee at
yahoo.fr> wrote:
> Hello,
> I'm trying to install samba 4 as a DC following this tutorial
> https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO.
>
> Ihave reached the step of testing the connectivity to the DC with smbclient
>
> [root at DC-TEST ~]#  /usr/local/samba/bin/smbclient -L localhost -U%
> session setup failed: NT_STATUS_CONNECTION_REFUSED
>
> Samba 4 has started successfully
>
> [root at DC-TEST ~]# netstat -lntp
> Active Internet connections (only servers)
> Proto Recv-Q Send-Q Local Address               Foreign Address
>   State       PID/Program name
> tcp        0      0 0.0.0.0:139                 0.0.0.0:*
>   LISTEN      1906/smbd
> tcp        0      0 0.0.0.0:111                 0.0.0.0:*
>   LISTEN      1160/rpcbind
> tcp        0      0 0.0.0.0:51505               0.0.0.0:*
>   LISTEN      1178/rpc.statd
> tcp        0      0 0.0.0.0:22                  0.0.0.0:*
>   LISTEN      1261/sshd
> tcp        0      0 0.0.0.0:445                 0.0.0.0:*
>   LISTEN      1906/smbd
> tcp        0      0 :::139                      :::*
>  LISTEN      1906/smbd
> tcp        0      0 :::111                      :::*
>  LISTEN      1160/rpcbind
> tcp        0      0 :::22                       :::*
>  LISTEN      1261/sshd
> tcp        0      0 :::445                      :::*
>  LISTEN      1906/smbd
> tcp        0      0 :::46598                    :::*
>  LISTEN      1178/rpc.statd
>
> Here is an output af smbclient in debbuging mode
>
> [root at DC-TEST ~]#  /usr/local/samba/bin/smbclient -d8 -L localhost -U%
> INFO: Current debug levels:
> all: 8
> tdb: 8
> printdrivers: 8
> lanman: 8
> smb: 8
> rpc_parse: 8
> rpc_srv: 8
> rpc_cli: 8
> passdb: 8
> sam: 8
> auth: 8
> winbind: 8
> vfs: 8
> idmap: 8
> quota: 8
> acls: 8
> locking: 8
> msdfs: 8
> dmapi: 8
> registry: 8
> lp_load_ex: refreshing parameters
> Initialising global parameters
> rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
> INFO: Current debug levels:
> all: 8
> tdb: 8
> printdrivers: 8
> lanman: 8
> smb: 8
> rpc_parse: 8
> rpc_srv: 8
> rpc_cli: 8
> passdb: 8
> sam: 8
> auth: 8
> winbind: 8
> vfs: 8
> idmap: 8
> quota: 8
> acls: 8
> locking: 8
> msdfs: 8
> dmapi: 8
> registry: 8
> params.c:pm_process() - Processing configuration file
> "/usr/local/samba/etc/smb.conf"
> Processing section "[global]"
> doing parameter workgroup = SIEGE
> doing parameter realm = bceao.int
> doing parameter netbios name = Z00-DC01
> doing parameter server role = active directory domain controller
> doing parameter idmap_ldb:use rfc2307 = yes
> doing parameter logfile = /usr/local/samba/log/samba.log
> doing parameter wins support = yes
> doing parameter hosts allow = 10.67.200.
> doing parameter load printers = no
> pm_process() returned Yes
> lp_servicenumber: couldn't find homes
> added interface eth0 ip=10.67.200.22 bcast=10.67.200.255
> netmask=255.255.255.0
> added interface eth1 ip=10.185.200.68 bcast=10.185.201.255
> netmask=255.255.254.0
> Netbios name list:-
> my_netbios_names[0]="Z00-DC01"
> Client started (version 4.0.6).
> Opening cache file at /usr/local/samba/var/lock/gencache.tdb
> Opening cache file at /usr/local/samba/var/lock/gencache_notrans.tdb
> sitename_fetch: No stored sitename for BCEAO.INT
> name localhost#20 found.
> Connecting to 127.0.0.1 at port 445
> Socket options:
> SO_KEEPALIVE = 0
> SO_REUSEADDR = 0
> SO_BROADCAST = 0
> TCP_NODELAY = 1
> TCP_KEEPCNT = 9
> TCP_KEEPIDLE = 7200
> TCP_KEEPINTVL = 75
> IPTOS_LOWDELAY = 0
> IPTOS_THROUGHPUT = 0
> SO_SNDBUF = 50748
> SO_RCVBUF = 87584
> SO_SNDLOWAT = 1
> SO_RCVLOWAT = 1
> SO_SNDTIMEO = 0
> SO_RCVTIMEO = 0
> TCP_QUICKACK = 1
> TCP_DEFER_ACCEPT = 0
> session request ok
> session setup failed: NT_STATUS_CONNECTION_REFUSED
>
> Here is the smb.conf file's content
>
> # Global parameters
> [global]
> workgroup = SIEGE
> realm = bceao.int
> netbios name = Z00-DC01
> server role = active directory domain controller
> #dcerpc endpoint  servers = remote
> idmap_ldb:use rfc2307 = yes
> logfile = /usr/local/samba/log/samba.log
> wins support = yes
> hosts allow = 10.67.200.
> load printers = no
>
> [netlogon]
> path = /usr/local/samba/var/locks/sysvol/bceao.int/scripts
> read only = No
>
> [sysvol]
> path = /usr/local/samba/var/locks/sysvol
> read only = No
> [test]
> path = /var
> read only = No
> Please may have have you're help
> NB : the smbclient's version is 4.0.6
>
>
> MMe GUEI NOEE MELAINE
> BP 3108 DAKAR SENEGAL
> SERVICE INFORMATIQUE
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>

Apparently Analagous Threads

Search for more possibly parallel threads

samba - Sep 2013 - NT_STATUS_CONNECTION_REFUSED with smbclient and samba 4.0.6

[Samba] NT_STATUS_CONNECTION_REFUSED with smbclient and samba 4.0.6

[Samba] NT_STATUS_CONNECTION_REFUSED with smbclient and samba 4.0.6

[Samba] NT_STATUS_CONNECTION_REFUSED with smbclient and samba 4.0.6

Apparently Analagous Threads