----- Original Message -----
From: "David Ranch" <dranch@trinnet.net>
To: "Juda Barnes" <juda@pent900.com>; <masq@indyramp.com>
Sent: Wednesday, November 21, 2001 5:39 AM
Subject: Re: [Masq] Tunnelling Via Linux
> >Well my ISP using That kind of Tunnel (See below)
> >
> >It is called ''NOS''
>
> Not really.. this is a basic IP/IP tunnel. Very old stuff.
Well the BASIC thats GREAT but i wouldnt able to set it up ;-(
i have allready read the Adv-Routing-HOWTO (About 6 times the part
5.2. )
and i have tried to
ifconfig tunl0 10.0.1.1 pointopoint 172.19.20.21
route add -net 10.0.2.0 netmask 255.255.255.0 dev tunl0
but it dont work :(
there are 3 ip factories and in that basic there are only 2
i need to supply the system : tunnel source ''Thats my ADSL Fixed
IP''
tunnel dest ''Thats the Router Which host my Tunnel''
('' i think thats the pointopoint filled '' )
my ip on the tunnel ''the tunnel is 4 ips 11.201.0.8/30''
''my ip is 11.201.0.10 and the other
is 9 so i should be able to ping there ''
Any idea ???
>
>
> >Tunnel2 is up, line protocol is up
> > Hardware is Tunnel
> > Internet address is 10.200.0.2/30
> > MTU 1514 bytes, BW 9 Kbit, DLY 500000 usec,
> > reliability 255/255, txload 1/255, rxload 56/255
> > Encapsulation TUNNEL, loopback not set
> > Keepalive set (10 sec)
> > Tunnel source 62.219.161.125, destination 212.25.114.74
> > Tunnel protocol/transport IP/IP (NOS), key disabled, sequencing
disabled> > Checksumming of packets disabled
> > Last input 00:00:00, output never, output hang never
> > Last clearing of "show interface" counters never
> > Queueing strategy: fifo
> > Output queue 0/0, 0 drops; input queue 0/75, 0 drops
> > 30 second input rate 2000 bits/sec, 4 packets/sec
> > 30 second output rate 0 bits/sec, 0 packets/sec
> > 300 packets input, 14322 bytes, 0 no buffer
> > Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> > 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> > 0 packets output, 0 bytes, 0 underruns
> > 0 output errors, 0 collisions, 0 interface resets
> > 0 output buffer failures, 0 output buffers swapped out
>
>
> Ultimately, I don''t recommend IP/IP tunnels in a preference
> to GRE tunnels but Linux supports BOTH.
>
> http://www.linuxdoc.org/HOWTO/Adv-Routing-HOWTO-5.html
>
> --David
>
.---------------------------------------------------------------------------
-.> | David A. Ranch - Linux/Networking/PC hardware
dranch@trinnet.net |>
----!> `----- For more detailed info, see
http://www.ecst.csuchico.edu/~dranch -----''>
>