Hi,
I have one router with 4 interfaces:
Input1
/
out - R - Input2
\
Input3
The flows sense is: Input1 -> output; Input2->out;
Input3->out;
I want to do classification, shaping and marking in
each In* interface and some queueing management in out
interface.
For In* interfaces I tried to use the following
script:
#!/bin/sh
DEV1="dev eth3"
# In1
DEV2="dev eth2"
# In2
DEV3="dev eth4"
# In3
DEV4="dev eth1"
# out
tc qdisc del $DEV1 ingress
tc qdisc del $DEV2 ingress
tc qdisc del $DEV3 ingress
tc qdisc del $DEV4 root
# initialisation part
tc qdisc add $DEV1 ingress
tc qdisc add $DEV2 ingress
tc qdisc add $DEV3 ingress
tc qdisc add $DEV4 root handle 1:0 cbq bandwidth
10Mbit avpkt 1500 cell 8
# for interface In1 (here is DEV1)
# shaping + classification
tc filter add $DEV1 parent ffff:0 protocol ip prio 1
u32 match ip dst 192.168.3.6 match ip dport 6970
0xffff police rate 500Kbit burst 30K drop flowid 1:1
tc filter add $DEV1 parent ffff:0 protocol ip prio 1
u32 match ip src 192.168.9.17 match ip dport 5050
0xffff police rate 500Kbit burst 6K drop classid 1:2
tc filter add $DEV1 parent ffff:0 protocol ip prio 1
u32 match ip src 192.168.9.17 match ip sport 80 0xffff
police rate 300Kbit burst 6K drop classid 1:3
# marking with tos field
# Somebody has an I ideea how it should be done?
#for interface In2 (here is DEV2)
.................
#for interface In3 (here is DEV3)
.................
#for interface out (here is DEV4)
tc class add $DEV4 parent 1:0 classid 1:1 cbq
bandwidth 10Mbit rate 250Kbit avpkt 1500 allot 1514
mpu 64 prio
tc qdisc add $DEV4 parent 1:1 tbf rate 1Mbit burst
20kbit limit 20kb
tc class add $DEV4 parent 1:0 classid 1:2 cbq
bandwidth 10Mbit rate 300Kbit avpkt 1500 allot 1514
mpu 64 prio 2
tc qdisc add $DEV4 parent 1:2 gred setup DPs 1 default
1 grio
tc qdisc change $DEV4 parent 1:2 gred limit 10KB min
2KB max 6KB avpkt 1500 burst 4 bandwidth 10Mbit DP 1
probability 0.02 prio 2
tc class add $DEV4 parent 1:0 classid 1:3 cbq
bandwidth 10Mbit rate 700Kbit avpkt 1500 allot 1514
mpu 64 prio 2
tc qdisc add $DEV4 parent 1:3 gred setup DPs 1 default
1 grio
tc qdisc change $DEV4 parent 1:3 gred limit 10KB min
2KB max 6KB avpkt 1500 burst 4 bandwidth 10Mbit DP 1
probability 0.02 prio 2
So, when I start the script and provision the In
interface with ingress task the system is frozen! Why?
Can anybody explain me?
Also, I don''t have any ideea how to mark the packets
at the ingress. I tried to use dsmark queueing
discipline but I can''t use it at the ingress. Have you
another
ideea?
Thank you,
R.
__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
tc qdisc add dev $DEV handle ffff:fff1 ingress or tc qdisc add dev $DEV handle ffff: ingress tc filter add dev $DEV parent ffff:fff1 protocol ip .... or tc filter add dev $DEV parent ffff: protocol ip .... for details see Linux Network Traffic Control - Implementation Overview Werner Almesberger February 4, 2001 31.05.2002 15:16:45, Mr SERBAN Rares <serban_rares@yahoo.com> wrote:>Hi, > >I have one router with 4 interfaces: > > Input1 > / > out - R - Input2 > \ > Input3 > >The flows sense is: Input1 -> output; Input2->out; >Input3->out; > >I want to do classification, shaping and marking in >each In* interface and some queueing management in out >interface. >For In* interfaces I tried to use the following >script: > >#!/bin/sh >DEV1="dev eth3" ># In1 >DEV2="dev eth2" ># In2 >DEV3="dev eth4" ># In3 >DEV4="dev eth1" ># out > >tc qdisc del $DEV1 ingress >tc qdisc del $DEV2 ingress >tc qdisc del $DEV3 ingress >tc qdisc del $DEV4 root > ># initialisation part >tc qdisc add $DEV1 ingress >tc qdisc add $DEV2 ingress >tc qdisc add $DEV3 ingress >tc qdisc add $DEV4 root handle 1:0 cbq bandwidth >10Mbit avpkt 1500 cell 8 > ># for interface In1 (here is DEV1) > ># shaping + classification >tc filter add $DEV1 parent ffff:0 protocol ip prio 1 >u32 match ip dst 192.168.3.6 match ip dport 6970 >0xffff police rate 500Kbit burst 30K drop flowid 1:1 >tc filter add $DEV1 parent ffff:0 protocol ip prio 1 >u32 match ip src 192.168.9.17 match ip dport 5050 >0xffff police rate 500Kbit burst 6K drop classid 1:2 >tc filter add $DEV1 parent ffff:0 protocol ip prio 1 >u32 match ip src 192.168.9.17 match ip sport 80 0xffff >police rate 300Kbit burst 6K drop classid 1:3 > ># marking with tos field ># Somebody has an I ideea how it should be done? > >#for interface In2 (here is DEV2) >................. > >#for interface In3 (here is DEV3) >................. > >#for interface out (here is DEV4) >tc class add $DEV4 parent 1:0 classid 1:1 cbq >bandwidth 10Mbit rate 250Kbit avpkt 1500 allot 1514 >mpu 64 prio >tc qdisc add $DEV4 parent 1:1 tbf rate 1Mbit burst >20kbit limit 20kb > >tc class add $DEV4 parent 1:0 classid 1:2 cbq >bandwidth 10Mbit rate 300Kbit avpkt 1500 allot 1514 >mpu 64 prio 2 >tc qdisc add $DEV4 parent 1:2 gred setup DPs 1 default >1 grio >tc qdisc change $DEV4 parent 1:2 gred limit 10KB min >2KB max 6KB avpkt 1500 burst 4 bandwidth 10Mbit DP 1 >probability 0.02 prio 2 > >tc class add $DEV4 parent 1:0 classid 1:3 cbq >bandwidth 10Mbit rate 700Kbit avpkt 1500 allot 1514 >mpu 64 prio 2 >tc qdisc add $DEV4 parent 1:3 gred setup DPs 1 default >1 grio >tc qdisc change $DEV4 parent 1:3 gred limit 10KB min >2KB max 6KB avpkt 1500 burst 4 bandwidth 10Mbit DP 1 >probability 0.02 prio 2 > >So, when I start the script and provision the In >interface with ingress task the system is frozen! Why? >Can anybody explain me? >Also, I don''t have any ideea how to mark the packets >at the ingress. I tried to use dsmark queueing >discipline but I can''t use it at the ingress. Have you >another >ideea? > >Thank you, > >R. > >__________________________________________________ >Do You Yahoo!? >Yahoo! - Official partner of 2002 FIFA World Cup >http://fifaworldcup.yahoo.com >_______________________________________________ >LARTC mailing list / LARTC@mailman.ds9a.nl >http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >----------------------------------- mailto:alexey_talikov@texlab.com.uz BR Alexey Talikov FORTEK -----------------------------------
Hi Alexey, I read the paper of Werner Almesberger. I didn'' t understand if there are multiple instances of ingress queueing discipline. Can you be more specific? Also I want to do marking operation in ingress interface. How do I do? Thank you, R. --- Alexey Talikov <alexey_talikov@texlab.com.uz> wrote:> tc qdisc add dev $DEV handle ffff:fff1 ingress > or > tc qdisc add dev $DEV handle ffff: ingress > tc filter add dev $DEV parent ffff:fff1 protocol ip > .... > or > tc filter add dev $DEV parent ffff: protocol ip .... > > for details see Linux Network Traffic Control - > Implementation Overview > Werner Almesberger February 4, 2001 > > 31.05.2002 15:16:45, Mr SERBAN Rares > <serban_rares@yahoo.com> wrote: > > >Hi, > > > >I have one router with 4 interfaces: > > > > Input1 > > / > > out - R - Input2 > > \ > > Input3 > > > >The flows sense is: Input1 -> output; Input2->out; > >Input3->out; > > > >I want to do classification, shaping and marking in > >each In* interface and some queueing management in > out > >interface. > >For In* interfaces I tried to use the following > >script: > > > >#!/bin/sh > >DEV1="dev eth3" > ># In1 > >DEV2="dev eth2" > ># In2 > >DEV3="dev eth4" > ># In3 > >DEV4="dev eth1" > ># out > > > >tc qdisc del $DEV1 ingress > >tc qdisc del $DEV2 ingress > >tc qdisc del $DEV3 ingress > >tc qdisc del $DEV4 root > > > ># initialisation part > >tc qdisc add $DEV1 ingress > >tc qdisc add $DEV2 ingress > >tc qdisc add $DEV3 ingress > >tc qdisc add $DEV4 root handle 1:0 cbq bandwidth > >10Mbit avpkt 1500 cell 8 > > > ># for interface In1 (here is DEV1) > > > ># shaping + classification > >tc filter add $DEV1 parent ffff:0 protocol ip prio > 1 > >u32 match ip dst 192.168.3.6 match ip dport 6970 > >0xffff police rate 500Kbit burst 30K drop flowid > 1:1 > >tc filter add $DEV1 parent ffff:0 protocol ip prio > 1 > >u32 match ip src 192.168.9.17 match ip dport 5050 > >0xffff police rate 500Kbit burst 6K drop classid > 1:2 > >tc filter add $DEV1 parent ffff:0 protocol ip prio > 1 > >u32 match ip src 192.168.9.17 match ip sport 80 > 0xffff > >police rate 300Kbit burst 6K drop classid 1:3 > > > ># marking with tos field > ># Somebody has an I ideea how it should be done? > > > >#for interface In2 (here is DEV2) > >................. > > > >#for interface In3 (here is DEV3) > >................. > > > >#for interface out (here is DEV4) > >tc class add $DEV4 parent 1:0 classid 1:1 cbq > >bandwidth 10Mbit rate 250Kbit avpkt 1500 allot 1514 > >mpu 64 prio > >tc qdisc add $DEV4 parent 1:1 tbf rate 1Mbit burst > >20kbit limit 20kb > > > >tc class add $DEV4 parent 1:0 classid 1:2 cbq > >bandwidth 10Mbit rate 300Kbit avpkt 1500 allot 1514 > >mpu 64 prio 2 > >tc qdisc add $DEV4 parent 1:2 gred setup DPs 1 > default > >1 grio > >tc qdisc change $DEV4 parent 1:2 gred limit 10KB > min > >2KB max 6KB avpkt 1500 burst 4 bandwidth 10Mbit DP > 1 > >probability 0.02 prio 2 > > > >tc class add $DEV4 parent 1:0 classid 1:3 cbq > >bandwidth 10Mbit rate 700Kbit avpkt 1500 allot 1514 > >mpu 64 prio 2 > >tc qdisc add $DEV4 parent 1:3 gred setup DPs 1 > default > >1 grio > >tc qdisc change $DEV4 parent 1:3 gred limit 10KB > min > >2KB max 6KB avpkt 1500 burst 4 bandwidth 10Mbit DP > 1 > >probability 0.02 prio 2 > > > >So, when I start the script and provision the In > >interface with ingress task the system is frozen! > Why? > >Can anybody explain me? > >Also, I don''t have any ideea how to mark the > packets > >at the ingress. I tried to use dsmark queueing > >discipline but I can''t use it at the ingress. Have > you > >another > >ideea? > > > >Thank you, > > > >R. > > > >__________________________________________________ > >Do You Yahoo!? > >Yahoo! - Official partner of 2002 FIFA World Cup > >http://fifaworldcup.yahoo.com > >_______________________________________________ > >LARTC mailing list / LARTC@mailman.ds9a.nl > >http://mailman.ds9a.nl/mailman/listinfo/lartc > HOWTO: http://lartc.org/ > > > > ----------------------------------- > mailto:alexey_talikov@texlab.com.uz > BR > Alexey Talikov > FORTEK > ----------------------------------- > >__________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com
You can''t add multiple instances of ingress qdisc it classless but possible add some filters tc qdisc add dev eth0 handle ffff:fff1 ingress tc filter add dev eth0 parent ffff:fff1 protocol ip prio 50 u32 match ip src 192.168.1.2/32 \ police rate 100kbit burst 10k drop flowid :1 tc filter add dev eth0 parent ffff:fff1 protocol ip prio 50 u32 match ip src 192.168.1.3/32 \ police rate 150kbit burst 10k drop flowid :1 tc filter add dev eth0 parent ffff:fff1 protocol ip prio 50 handle 1 fw police rate 200kbit \ burst 18k drop flowid :1 iptables -t mangle -A PREROUTING -i eth0 -s 192.168.1.4 -j MARK --set-mark 1 You may also limit all traffic from 192.168.1.2 to 800kbit and ssh to 200 kbit for example tc qdisc add dev eth0 handle ffff:fff1 ingress tc filter add dev eth0 parent ffff:fff1 protocol ip prio 50 u32 match ip dport 22 0xffff \ police rate 200kbit burst 20k drop flowid :1 tc filter add dev eth0 parent ffff:fff1 protocol ip prio 50 u32 match ip src 192.168.1.2/32 \ police rate 800kbit burst 80k drop flowid :1 Note add limit for ssh before all limit for more complexity conf you may use IMQ device see http://luxik.cdi.cz/~patrick/imq/ example with htb: limit all traffic to 100kbps and then sharing 20kbps for ssh and 80 for ftp modprobe imq numdevs=1 tc qdisc add dev imq0 root handle 1: htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps tc class add dev imq0 parent 1: classid 1:10 htb rate 20kbps ceil 100kbps tc class add dev imq0 parent 1: classid 1:11 htb rate 80kbps ceil 100kbps tc filter add dev imq0 parent 1:0 protocol ip prio 2 handle 1 fw classid 1:11 tc filter add dev imq0 parent 1:0 protocol ip prio 2 handle 2 fw classid 1:10 tc qdisc add dev imq0 parent 1:10 handle 30: sfq tc qdisc add dev imq0 parent 1:11 handle 40: sfq iptables -t mangle -A PREROUTING -i eth0 -s 192.168.1.2/32 -j IMQ iptables -t mangle -A PREROUTING -i eth0 -s 192.168.1.2/32 --dport 20 -j MARK --set-mark 1 iptables -t mangle -A PREROUTING -i eth0 -s 192.168.1.2/32 --dport 22 -j MARK --set-mark 2 ip link set imq0 up 31.05.2002 18:43:25, Mr SERBAN Rares <serban_rares@yahoo.com> wrote:>Hi Alexey, > >I read the paper of Werner Almesberger. I didn'' t >understand if there are multiple instances of ingress >queueing discipline. Can you be more specific? > >Also I want to do marking operation in ingress >interface. How do I do? > >Thank you, > >R. > >--- Alexey Talikov <alexey_talikov@texlab.com.uz> >wrote: >> tc qdisc add dev $DEV handle ffff:fff1 ingress >> or >> tc qdisc add dev $DEV handle ffff: ingress >> tc filter add dev $DEV parent ffff:fff1 protocol ip >> .... >> or >> tc filter add dev $DEV parent ffff: protocol ip .... >> >> for details see Linux Network Traffic Control - >> Implementation Overview >> Werner Almesberger February 4, 2001 >> >> 31.05.2002 15:16:45, Mr SERBAN Rares >> <serban_rares@yahoo.com> wrote: >> >> >Hi, >> > >> >I have one router with 4 interfaces: >> > >> > Input1 >> > / >> > out - R - Input2 >> > \ >> > Input3 >> > >> >The flows sense is: Input1 -> output; Input2->out; >> >Input3->out; >> > >> >I want to do classification, shaping and marking in >> >each In* interface and some queueing management in >> out >> >interface. >> >For In* interfaces I tried to use the following >> >script: >> > >> >#!/bin/sh >> >DEV1="dev eth3" >> ># In1 >> >DEV2="dev eth2" >> ># In2 >> >DEV3="dev eth4" >> ># In3 >> >DEV4="dev eth1" >> ># out >> > >> >tc qdisc del $DEV1 ingress >> >tc qdisc del $DEV2 ingress >> >tc qdisc del $DEV3 ingress >> >tc qdisc del $DEV4 root >> > >> ># initialisation part >> >tc qdisc add $DEV1 ingress >> >tc qdisc add $DEV2 ingress >> >tc qdisc add $DEV3 ingress >> >tc qdisc add $DEV4 root handle 1:0 cbq bandwidth >> >10Mbit avpkt 1500 cell 8 >> > >> ># for interface In1 (here is DEV1) >> > >> ># shaping + classification >> >tc filter add $DEV1 parent ffff:0 protocol ip prio >> 1 >> >u32 match ip dst 192.168.3.6 match ip dport 6970 >> >0xffff police rate 500Kbit burst 30K drop flowid >> 1:1 >> >tc filter add $DEV1 parent ffff:0 protocol ip prio >> 1 >> >u32 match ip src 192.168.9.17 match ip dport 5050 >> >0xffff police rate 500Kbit burst 6K drop classid >> 1:2 >> >tc filter add $DEV1 parent ffff:0 protocol ip prio >> 1 >> >u32 match ip src 192.168.9.17 match ip sport 80 >> 0xffff >> >police rate 300Kbit burst 6K drop classid 1:3 >> > >> ># marking with tos field >> ># Somebody has an I ideea how it should be done? >> > >> >#for interface In2 (here is DEV2) >> >................. >> > >> >#for interface In3 (here is DEV3) >> >................. >> > >> >#for interface out (here is DEV4) >> >tc class add $DEV4 parent 1:0 classid 1:1 cbq >> >bandwidth 10Mbit rate 250Kbit avpkt 1500 allot 1514 >> >mpu 64 prio >> >tc qdisc add $DEV4 parent 1:1 tbf rate 1Mbit burst >> >20kbit limit 20kb >> > >> >tc class add $DEV4 parent 1:0 classid 1:2 cbq >> >bandwidth 10Mbit rate 300Kbit avpkt 1500 allot 1514 >> >mpu 64 prio 2 >> >tc qdisc add $DEV4 parent 1:2 gred setup DPs 1 >> default >> >1 grio >> >tc qdisc change $DEV4 parent 1:2 gred limit 10KB >> min >> >2KB max 6KB avpkt 1500 burst 4 bandwidth 10Mbit DP >> 1 >> >probability 0.02 prio 2 >> > >> >tc class add $DEV4 parent 1:0 classid 1:3 cbq >> >bandwidth 10Mbit rate 700Kbit avpkt 1500 allot 1514 >> >mpu 64 prio 2 >> >tc qdisc add $DEV4 parent 1:3 gred setup DPs 1 >> default >> >1 grio >> >tc qdisc change $DEV4 parent 1:3 gred limit 10KB >> min >> >2KB max 6KB avpkt 1500 burst 4 bandwidth 10Mbit DP >> 1 >> >probability 0.02 prio 2 >> > >> >So, when I start the script and provision the In >> >interface with ingress task the system is frozen! >> Why? >> >Can anybody explain me? >> >Also, I don''t have any ideea how to mark the >> packets >> >at the ingress. I tried to use dsmark queueing >> >discipline but I can''t use it at the ingress. Have >> you >> >another >> >ideea? >> > >> >Thank you, >> > >> >R. >> > >> >__________________________________________________ >> >Do You Yahoo!? >> >Yahoo! - Official partner of 2002 FIFA World Cup >> >http://fifaworldcup.yahoo.com >> >_______________________________________________ >> >LARTC mailing list / LARTC@mailman.ds9a.nl >> >http://mailman.ds9a.nl/mailman/listinfo/lartc >> HOWTO: http://lartc.org/ >> > >> >> ----------------------------------- >> mailto:alexey_talikov@texlab.com.uz >> BR >> Alexey Talikov >> FORTEK >> ----------------------------------- >> >> > > >__________________________________________________ >Do You Yahoo!? >Yahoo! - Official partner of 2002 FIFA World Cup >http://fifaworldcup.yahoo.com >----------------------------------- mailto:alexey_talikov@texlab.com.uz BR Alexey Talikov FORTEK -----------------------------------
Why not IMQ + whatever egress policy you want? It is a really cool piece of software. You could create up to 4 (?) virtual queues. Every queue could have packets enqueued from various real NICs based on your classification and it could be an egress, ingress or ingress+egress kind of queue!!! Mr SERBAN Rares wrote:>Hi Alexey, > >I read the paper of Werner Almesberger. I didn'' t >understand if there are multiple instances of ingress >queueing discipline. Can you be more specific? > >Also I want to do marking operation in ingress >interface. How do I do? > >Thank you, > >R. > >--- Alexey Talikov <alexey_talikov@texlab.com.uz> >wrote: > >>tc qdisc add dev $DEV handle ffff:fff1 ingress >>or >>tc qdisc add dev $DEV handle ffff: ingress >>tc filter add dev $DEV parent ffff:fff1 protocol ip >>.... >>or >>tc filter add dev $DEV parent ffff: protocol ip .... >> >>for details see Linux Network Traffic Control - >>Implementation Overview >>Werner Almesberger February 4, 2001 >> >>31.05.2002 15:16:45, Mr SERBAN Rares >><serban_rares@yahoo.com> wrote: >> >>>Hi, >>> >>>I have one router with 4 interfaces: >>> >>> Input1 >>> / >>> out - R - Input2 >>> \ >>> Input3 >>> >>>The flows sense is: Input1 -> output; Input2->out; >>>Input3->out; >>> >>>I want to do classification, shaping and marking in >>>each In* interface and some queueing management in >>> >>out >> >>>interface. >>>For In* interfaces I tried to use the following >>>script: >>> >>>#!/bin/sh >>>DEV1="dev eth3" >>># In1 >>>DEV2="dev eth2" >>># In2 >>>DEV3="dev eth4" >>># In3 >>>DEV4="dev eth1" >>># out >>> >>>tc qdisc del $DEV1 ingress >>>tc qdisc del $DEV2 ingress >>>tc qdisc del $DEV3 ingress >>>tc qdisc del $DEV4 root >>> >>># initialisation part >>>tc qdisc add $DEV1 ingress >>>tc qdisc add $DEV2 ingress >>>tc qdisc add $DEV3 ingress >>>tc qdisc add $DEV4 root handle 1:0 cbq bandwidth >>>10Mbit avpkt 1500 cell 8 >>> >>># for interface In1 (here is DEV1) >>> >>># shaping + classification >>>tc filter add $DEV1 parent ffff:0 protocol ip prio >>> >>1 >> >>>u32 match ip dst 192.168.3.6 match ip dport 6970 >>>0xffff police rate 500Kbit burst 30K drop flowid >>> >>1:1 >> >>>tc filter add $DEV1 parent ffff:0 protocol ip prio >>> >>1 >> >>>u32 match ip src 192.168.9.17 match ip dport 5050 >>>0xffff police rate 500Kbit burst 6K drop classid >>> >>1:2 >> >>>tc filter add $DEV1 parent ffff:0 protocol ip prio >>> >>1 >> >>>u32 match ip src 192.168.9.17 match ip sport 80 >>> >>0xffff >> >>>police rate 300Kbit burst 6K drop classid 1:3 >>> >>># marking with tos field >>># Somebody has an I ideea how it should be done? >>> >>>#for interface In2 (here is DEV2) >>>................. >>> >>>#for interface In3 (here is DEV3) >>>................. >>> >>>#for interface out (here is DEV4) >>>tc class add $DEV4 parent 1:0 classid 1:1 cbq >>>bandwidth 10Mbit rate 250Kbit avpkt 1500 allot 1514 >>>mpu 64 prio >>>tc qdisc add $DEV4 parent 1:1 tbf rate 1Mbit burst >>>20kbit limit 20kb >>> >>>tc class add $DEV4 parent 1:0 classid 1:2 cbq >>>bandwidth 10Mbit rate 300Kbit avpkt 1500 allot 1514 >>>mpu 64 prio 2 >>>tc qdisc add $DEV4 parent 1:2 gred setup DPs 1 >>> >>default >> >>>1 grio >>>tc qdisc change $DEV4 parent 1:2 gred limit 10KB >>> >>min >> >>>2KB max 6KB avpkt 1500 burst 4 bandwidth 10Mbit DP >>> >>1 >> >>>probability 0.02 prio 2 >>> >>>tc class add $DEV4 parent 1:0 classid 1:3 cbq >>>bandwidth 10Mbit rate 700Kbit avpkt 1500 allot 1514 >>>mpu 64 prio 2 >>>tc qdisc add $DEV4 parent 1:3 gred setup DPs 1 >>> >>default >> >>>1 grio >>>tc qdisc change $DEV4 parent 1:3 gred limit 10KB >>> >>min >> >>>2KB max 6KB avpkt 1500 burst 4 bandwidth 10Mbit DP >>> >>1 >> >>>probability 0.02 prio 2 >>> >>>So, when I start the script and provision the In >>>interface with ingress task the system is frozen! >>> >>Why? >> >>>Can anybody explain me? >>>Also, I don''t have any ideea how to mark the >>> >>packets >> >>>at the ingress. I tried to use dsmark queueing >>>discipline but I can''t use it at the ingress. Have >>> >>you >> >>>another >>>ideea? >>> >>>Thank you, >>> >>>R. >>> >>>__________________________________________________ >>>Do You Yahoo!? >>>Yahoo! - Official partner of 2002 FIFA World Cup >>>http://fifaworldcup.yahoo.com >>>_______________________________________________ >>>LARTC mailing list / LARTC@mailman.ds9a.nl >>>http://mailman.ds9a.nl/mailman/listinfo/lartc >>> >>HOWTO: http://lartc.org/ >> >>----------------------------------- >>mailto:alexey_talikov@texlab.com.uz >>BR >>Alexey Talikov >>FORTEK >>----------------------------------- >> >> > > >__________________________________________________ >Do You Yahoo!? >Yahoo! - Official partner of 2002 FIFA World Cup >http://fifaworldcup.yahoo.com >_______________________________________________ >LARTC mailing list / LARTC@mailman.ds9a.nl >http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >