On Saturday 19 April 2003 07:08, rio@martin.mu wrote:> Original Message:
> -----------------
> From: Stef Coene stef.coene@docum.org
>
> On Friday 18 April 2003 19:21, rio@martin.mu wrote:
> >I''m not sure, but I think you use htb.init. And this is not
the htb.init
> >mailing list. This is the LARTC lists to discuss topics like shaping,
> >advanced routing and other network stuff.
> >But answering on your question :
> >You have to create 1 class attached to the root qdisc and add the 4
other
> >classes to that class (don''t ask me how you have to do that
with
> >htb.init).
> >Can you also check that the filters are working and the traffic is
placed
> >in the class where it belongs?
>
> Oh sorry about that, below is what command i inserted:
>
> tc qdisc del dev eth0 root
> tc qdisc add dev eth0 root handle 1 htb default 30
> tc class add dev eth0 parent 1: classid 1:2 htb rate 120Kbit burst 15k
> tc class add dev eth0 parent 1:2 classid 1:11 htb rate 6Kbit ceil 120Kbit
> burst 15k
> tc qdisc add dev eth0 parent 1:11 handle 11 sfq perturb 10
> tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip dst
> 192.168.1.1 classid 1:11
> tc class add dev eth0 parent 1:2 classid 1:12 htb rate 6Kbit ceil 120Kbit
> burst 15k
> tc qdisc add dev eth0 parent 1:12 handle 12 sfq perturb 10
> tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip dst
> 192.168.1.2 classid 1:12
> tc class add dev eth0 parent 1:2 classid 1:13 htb rate 6Kbit ceil 120Kbit
> burst 15k
> tc qdisc add dev eth0 parent 1:13 handle 13 sfq perturb 10
> tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip dst
> 192.168.1.3 classid 1:13
> tc class add dev eth0 parent 1:2 classid 1:14 htb rate 6Kbit ceil 120Kbit
> burst 15k
> tc qdisc add dev eth0 parent 1:14 handle 14 sfq perturb 10
> tc filter add dev eth0 parent 1:0 protocol ip prio 100 u32 match ip dst
> 192.168.1.4 classid 1:14
>
> I ve tried those, and it worked, all hosts able to borrow bandwidth from
> parent class (120Kbit), but when any host start to download with DAP
> (download manager) that can consume high bandwidth, it can borrow 120Kbit
> from parent class and the speed wont decrease as the other hosts up and ask
> for more bandwidth.
>
> Any idea why ?
Yes :)
Remove the burst parameter. Htb will calculate the minimal burst for you.
And 6kbit is too low. You have 4 classes and you have 120kbit so give each
class a rate of 120/4 = 30kbit.
And prio 100 for a filter is useless. Prio in filters is only to determine
the order how the filters are checked. In your case, you can remove each
time prio 100. This will not change anything, it''s only a clean up if
the
commands.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/