I''ve been trying to get wondershaper 1.1a to let me set NOPRIOPORTSRC, but I cannot get it to work properly. If I leave NOPRIOPORTSRC blank, the uplink is limited to what I set it to. But if I put NOPRIOPORTSRC="80 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900" to make my bitorrents and my http server not effect my traffic for gaming and other stuff, the traffic is no longer limited! I have it set at 400uplink (on a 600kbps upload) and instead of it locking at ~400kbps upload like it does when I leave NOPRIOPORTSRC blank, it acts as if there is no traffic shaping on the line. To make things more interesting, after running the wondershaper script (without anything in NOPRIOPORTSRC) I manually tried to issue the command: tc filter add dev eth0 parent 1: protocol ip prio 15 u32 match ip sport 6881 0xffff flowid 1:30 to try and make port 6881 have lower priority. Before issuing this command, my upload remains a constant 50kb/s up, and once I hit enter, my upload jumps up as if the wondershaper is not even there. Am I doing something wrong? On a side note, Is there an easy way to span ports instead of manually typing them all out (like 6881-6900)? Thanks for your time. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
On Monday 29 March 2004 11:15 pm, Damion de Soto wrote:>I''ve fonud trying to make > bittorrent behave itself is quite difficult. > The 3 classes have rates specified as UPLINK, 9*$UPLINK/10 and 8*$UPLINK/10 > This means the sum of the 3 classes is greater than the parent. > You may want to specify the rates as something lower that add up to UPLINK, > and then specify the ceil value for each class.I tried what you had suggested and I was able to get great pings while uploading using the script! Now this is the really things get strange. Without doing anything to my connection or with wondershaper, about after 1 hour of running the script (and having my bandwith limited to 50kb/s) something changes and I start uploading at my max again. Why is this happening? _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Richard,> I''ve been trying to get wondershaper 1.1a to let me set NOPRIOPORTSRC, but I > cannot get it to work properly.This may be the same problem i discovered a while ago when I used the wondershaper as a base for my own rules. I''ve fonud trying to make bittorrent behave itself is quite difficult. The 3 classes have rates specified as UPLINK, 9*$UPLINK/10 and 8*$UPLINK/10 This means the sum of the 3 classes is greater than the parent. You may want to specify the rates as something lower that add up to UPLINK, and then specify the ceil value for each class.> Am I doing something wrong? On a side note, Is there an easy way to span > ports instead of manually typing them all out (like 6881-6900)?I use iptables to change the TOS bit of any packets in that range, then make a u32 filter for those TOS bits. regards, -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@snapgear.com SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org --- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Richard wrote:> On Monday 29 March 2004 11:15 pm, Damion de Soto wrote: > > >>I''ve fonud trying to make >>bittorrent behave itself is quite difficult. >>The 3 classes have rates specified as UPLINK, 9*$UPLINK/10 and 8*$UPLINK/10 >>This means the sum of the 3 classes is greater than the parent. >>You may want to specify the rates as something lower that add up to UPLINK, >>and then specify the ceil value for each class. > > > I tried what you had suggested and I was able to get great pings while > uploading using the script! > > Now this is the really things get strange. Without doing anything to my > connection or with wondershaper, about after 1 hour of running the script > (and having my bandwith limited to 50kb/s) something changes and I start > uploading at my max again. > > Why is this happening?I don''t think marking those BT ports will catch all BT connections - BT will work without opening ports. I think you can mark with one of the P2P marking projects on sf.net. Andy. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/