I am wondering whether the commands ''tc filter change'' and ''tc filter replace'' are working. Googling around revealed a few emails on the LARTC stating that unfoirtunately they do not work. A quick check showed that they are still not implemented (properly). Some propose a solution to build a second tree of filters and apply the 2nd one when a need for it arises. Howver how can someone achive the above trick. Any answer is welcomew. Thanks, Antonio & Alex _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
* Antonios Chalkiopoulos <200501241402.08307.alg0@iit.demokritos.gr> 2005-01-24 14:02> > I am wondering whether the commands ''tc filter change'' and ''tc filter replace'' > are working. Googling around revealed a few emails on the LARTC stating that > unfoirtunately they do not work. A quick check showed that they are still not > implemented (properly). > Some propose a solution to build a second tree of filters and apply the 2nd > one when a need for it arises. Howver how can someone achive the above trick.All classifiers except rsvp are changeable in the latest bk. The patchset has gone in around rc1-bk3-5. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Tomas Graf: You mentioned that "All classifier except rsvp are changeable in the latest bk. The patchset has gone in around rc1-bk3-5" Well issue 1 is that in iproute-latest (as well as the one released yesterday) the output of: tc show filter dev eth0 parent ffff:" and change/replace DO NOT WORK. ----------------------------------------------------------------------- filter protocol ip pref 50 u32 fh 800::801 order 2049 ht 800 bkt 0 match 0a010102/ffffffff at 12 police 0x4 rate 20000bit burst 2559b mtu 2kb action reclassify ref -10352222812 bind -8666697856 on the bk version (latest changeLog entry 18-1-2005) as you suggested the output is NOT VERBOSE ENOUGH to see if all parameters are working, but change/replace SEEM TO BE WORKING. Heres the output: filter protocol ip pref 50 u32 fh 800::801 order 2049 ht 800 bkt 0 match 0a010102/ffffffff at 12 ISSUE 2 ------- In lots of computers i try to install iproute2 i get an error about db_185.h missing . Issuing a simple apt-get install libdb4.1-dev resolves the problem and the arpd compiles perfectly. Maybe consider documenting that somewhere. --- Thomas Graf <tgraf@suug.ch> wrote:> * Antonios Chalkiopoulos > <200501241402.08307.alg0@iit.demokritos.gr> > 2005-01-24 14:02 > > > > I am wondering whether the commands ''tc filter > change'' and ''tc filter replace'' > > are working. Googling around revealed a few emails > on the LARTC stating that > > unfoirtunately they do not work. A quick check > showed that they are still not > > implemented (properly). > > Some propose a solution to build a second tree of > filters and apply the 2nd > > one when a need for it arises. Howver how can > someone achive the above trick. > > All classifiers except rsvp are changeable in the > latest bk. The > patchset has gone in around rc1-bk3-5. > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: > http://lartc.org/ >__________________________________ Do you Yahoo!? Take Yahoo! Mail with you! Get it on your mobile phone. http://mobile.yahoo.com/maildemo _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Tomas Graf: You mentioned that "All classifier except rsvp are changeable in the latest bk. The patchset has gone in around rc1-bk3-5" Well issue 1 is that in iproute-latest (as well as the one released yesterday) the output of: tc show filter dev eth0 parent ffff:" and change/replace DO NOT WORK. ----------------------------------------------------------------------- filter protocol ip pref 50 u32 fh 800::801 order 2049 ht 800 bkt 0 match 0a010102/ffffffff at 12 police 0x4 rate 20000bit burst 2559b mtu 2kb action reclassify ref -10352222812 bind -8666697856 on the bk version (latest changeLog entry 18-1-2005) as you suggested the output is NOT VERBOSE ENOUGH to see if all parameters are working, but change/replace SEEM TO BE WORKING. Heres the output: filter protocol ip pref 50 u32 fh 800::801 order 2049 ht 800 bkt 0 match 0a010102/ffffffff at 12 ISSUE 2 ------- In lots of computers i try to install iproute2 i get an error about db_185.h missing . Issuing a simple apt-get install libdb4.1-dev resolves the problem and the arpd compiles perfectly. Maybe consider documenting that somewhere. __________________________________ Do you Yahoo!? Meet the all-new My Yahoo! - Try it today! http://my.yahoo.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/