Jan Beulich
2013-Feb-06 16:58 UTC
[PATCH] xen-pciback: notify hypervisor about devices intended to be assigned to guests
For MSI-X capable devices the hypervisor wants to write protect the MSI-X table and PBA, yet it can''t assume that resources have been assigned to their final values at device enumeration time. Thus have pciback do that notification, as having the device controlled by it is a prerequisite to assigning the device to guests anyway. Signed-off-by: Jan Beulich <jbeulich@suse.com> --- arch/x86/include/asm/xen/hypercall.h | 4 +- drivers/xen/fallback.c | 3 + drivers/xen/xen-pciback/pci_stub.c | 59 ++++++++++++++++++++++++++--------- include/xen/interface/physdev.h | 6 +++ 4 files changed, 54 insertions(+), 18 deletions(-) --- 3.8-rc6/arch/x86/include/asm/xen/hypercall.h +++ 3.8-rc6-xen-pciback-MSI-X-prepare/arch/x86/include/asm/xen/hypercall.h @@ -382,14 +382,14 @@ HYPERVISOR_console_io(int cmd, int count return _hypercall3(int, console_io, cmd, count, str); } -extern int __must_check HYPERVISOR_physdev_op_compat(int, void *); +extern int __must_check xen_physdev_op_compat(int, void *); static inline int HYPERVISOR_physdev_op(int cmd, void *arg) { int rc = _hypercall2(int, physdev_op, cmd, arg); if (unlikely(rc == -ENOSYS)) - rc = HYPERVISOR_physdev_op_compat(cmd, arg); + rc = xen_physdev_op_compat(cmd, arg); return rc; } --- 3.8-rc6/drivers/xen/fallback.c +++ 3.8-rc6-xen-pciback-MSI-X-prepare/drivers/xen/fallback.c @@ -44,7 +44,7 @@ int xen_event_channel_op_compat(int cmd, } EXPORT_SYMBOL_GPL(xen_event_channel_op_compat); -int HYPERVISOR_physdev_op_compat(int cmd, void *arg) +int xen_physdev_op_compat(int cmd, void *arg) { struct physdev_op op; int rc; @@ -78,3 +78,4 @@ int HYPERVISOR_physdev_op_compat(int cmd return rc; } +EXPORT_SYMBOL_GPL(xen_physdev_op_compat); --- 3.8-rc6/drivers/xen/xen-pciback/pci_stub.c +++ 3.8-rc6-xen-pciback-MSI-X-prepare/drivers/xen/xen-pciback/pci_stub.c @@ -17,6 +17,7 @@ #include <xen/events.h> #include <asm/xen/pci.h> #include <asm/xen/hypervisor.h> +#include <xen/interface/physdev.h> #include "pciback.h" #include "conf_space.h" #include "conf_space_quirks.h" @@ -85,37 +86,52 @@ static struct pcistub_device *pcistub_de static void pcistub_device_release(struct kref *kref) { struct pcistub_device *psdev; + struct pci_dev *dev; struct xen_pcibk_dev_data *dev_data; psdev = container_of(kref, struct pcistub_device, kref); - dev_data = pci_get_drvdata(psdev->dev); + dev = psdev->dev; + dev_data = pci_get_drvdata(dev); - dev_dbg(&psdev->dev->dev, "pcistub_device_release\n"); + dev_dbg(&dev->dev, "pcistub_device_release\n"); - xen_unregister_device_domain_owner(psdev->dev); + xen_unregister_device_domain_owner(dev); /* Call the reset function which does not take lock as this * is called from "unbind" which takes a device_lock mutex. */ - __pci_reset_function_locked(psdev->dev); - if (pci_load_and_free_saved_state(psdev->dev, - &dev_data->pci_saved_state)) { - dev_dbg(&psdev->dev->dev, "Could not reload PCI state\n"); - } else - pci_restore_state(psdev->dev); + __pci_reset_function_locked(dev); + if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state)) + dev_dbg(&dev->dev, "Could not reload PCI state\n"); + else + pci_restore_state(dev); + + if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + struct physdev_pci_device ppdev = { + .seg = pci_domain_nr(dev->bus), + .bus = dev->bus->number, + .devfn = dev->devfn + }; + int err = HYPERVISOR_physdev_op(PHYSDEVOP_release_msix, + &ppdev); + + if (err) + dev_warn(&dev->dev, "MSI-X release failed (%d)\n", + err); + } /* Disable the device */ - xen_pcibk_reset_device(psdev->dev); + xen_pcibk_reset_device(dev); kfree(dev_data); - pci_set_drvdata(psdev->dev, NULL); + pci_set_drvdata(dev, NULL); /* Clean-up the device */ - xen_pcibk_config_free_dyn_fields(psdev->dev); - xen_pcibk_config_free_dev(psdev->dev); + xen_pcibk_config_free_dyn_fields(dev); + xen_pcibk_config_free_dev(dev); - psdev->dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED; - pci_dev_put(psdev->dev); + dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED; + pci_dev_put(dev); kfree(psdev); } @@ -355,6 +371,19 @@ static int pcistub_init_device(struct pc if (err) goto config_release; + if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + struct physdev_pci_device ppdev = { + .seg = pci_domain_nr(dev->bus), + .bus = dev->bus->number, + .devfn = dev->devfn + }; + + err = HYPERVISOR_physdev_op(PHYSDEVOP_prepare_msix, &ppdev); + if (err) + dev_err(&dev->dev, "MSI-X preparation failed (%d)\n", + err); + } + /* We need the device active to save the state. */ dev_dbg(&dev->dev, "save state of device\n"); pci_save_state(dev); --- 3.8-rc6/include/xen/interface/physdev.h +++ 3.8-rc6-xen-pciback-MSI-X-prepare/include/xen/interface/physdev.h @@ -251,6 +251,12 @@ struct physdev_pci_device_add { #define PHYSDEVOP_pci_device_remove 26 #define PHYSDEVOP_restore_msi_ext 27 +/* + * Dom0 should use these two to announce MMIO resources assigned to + * MSI-X capable devices won''t (prepare) or may (release) change. + */ +#define PHYSDEVOP_prepare_msix 30 +#define PHYSDEVOP_release_msix 31 struct physdev_pci_device { /* IN */ uint16_t seg; _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel
Konrad Rzeszutek Wilk
2013-Feb-06 17:12 UTC
Re: [PATCH] xen-pciback: notify hypervisor about devices intended to be assigned to guests
On Wed, Feb 06, 2013 at 04:58:01PM +0000, Jan Beulich wrote:> For MSI-X capable devices the hypervisor wants to write protect the > MSI-X table and PBA, yet it can''t assume that resources have been > assigned to their final values at device enumeration time. Thus have > pciback do that notification, as having the device controlled by it is > a prerequisite to assigning the device to guests anyway. > > Signed-off-by: Jan Beulich <jbeulich@suse.com> > > --- > arch/x86/include/asm/xen/hypercall.h | 4 +- > drivers/xen/fallback.c | 3 + > drivers/xen/xen-pciback/pci_stub.c | 59 ++++++++++++++++++++++++++--------- > include/xen/interface/physdev.h | 6 +++ > 4 files changed, 54 insertions(+), 18 deletions(-) > > --- 3.8-rc6/arch/x86/include/asm/xen/hypercall.h > +++ 3.8-rc6-xen-pciback-MSI-X-prepare/arch/x86/include/asm/xen/hypercall.h > @@ -382,14 +382,14 @@ HYPERVISOR_console_io(int cmd, int count > return _hypercall3(int, console_io, cmd, count, str); > } > > -extern int __must_check HYPERVISOR_physdev_op_compat(int, void *); > +extern int __must_check xen_physdev_op_compat(int, void *); > > static inline int > HYPERVISOR_physdev_op(int cmd, void *arg) > { > int rc = _hypercall2(int, physdev_op, cmd, arg); > if (unlikely(rc == -ENOSYS)) > - rc = HYPERVISOR_physdev_op_compat(cmd, arg); > + rc = xen_physdev_op_compat(cmd, arg); > return rc; > } > > --- 3.8-rc6/drivers/xen/fallback.c > +++ 3.8-rc6-xen-pciback-MSI-X-prepare/drivers/xen/fallback.c > @@ -44,7 +44,7 @@ int xen_event_channel_op_compat(int cmd, > } > EXPORT_SYMBOL_GPL(xen_event_channel_op_compat); > > -int HYPERVISOR_physdev_op_compat(int cmd, void *arg) > +int xen_physdev_op_compat(int cmd, void *arg) > { > struct physdev_op op; > int rc; > @@ -78,3 +78,4 @@ int HYPERVISOR_physdev_op_compat(int cmd > > return rc; > } > +EXPORT_SYMBOL_GPL(xen_physdev_op_compat); > --- 3.8-rc6/drivers/xen/xen-pciback/pci_stub.c > +++ 3.8-rc6-xen-pciback-MSI-X-prepare/drivers/xen/xen-pciback/pci_stub.c > @@ -17,6 +17,7 @@ > #include <xen/events.h> > #include <asm/xen/pci.h> > #include <asm/xen/hypervisor.h> > +#include <xen/interface/physdev.h> > #include "pciback.h" > #include "conf_space.h" > #include "conf_space_quirks.h" > @@ -85,37 +86,52 @@ static struct pcistub_device *pcistub_de > static void pcistub_device_release(struct kref *kref) > { > struct pcistub_device *psdev; > + struct pci_dev *dev; > struct xen_pcibk_dev_data *dev_data; > > psdev = container_of(kref, struct pcistub_device, kref); > - dev_data = pci_get_drvdata(psdev->dev); > + dev = psdev->dev; > + dev_data = pci_get_drvdata(dev); > > - dev_dbg(&psdev->dev->dev, "pcistub_device_release\n"); > + dev_dbg(&dev->dev, "pcistub_device_release\n"); > > - xen_unregister_device_domain_owner(psdev->dev); > + xen_unregister_device_domain_owner(dev); > > /* Call the reset function which does not take lock as this > * is called from "unbind" which takes a device_lock mutex. > */ > - __pci_reset_function_locked(psdev->dev); > - if (pci_load_and_free_saved_state(psdev->dev, > - &dev_data->pci_saved_state)) { > - dev_dbg(&psdev->dev->dev, "Could not reload PCI state\n"); > - } else > - pci_restore_state(psdev->dev); > + __pci_reset_function_locked(dev); > + if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state)) > + dev_dbg(&dev->dev, "Could not reload PCI state\n"); > + else > + pci_restore_state(dev); > + > + if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { > + struct physdev_pci_device ppdev = { > + .seg = pci_domain_nr(dev->bus), > + .bus = dev->bus->number, > + .devfn = dev->devfn > + }; > + int err = HYPERVISOR_physdev_op(PHYSDEVOP_release_msix, > + &ppdev); > + > + if (err) > + dev_warn(&dev->dev, "MSI-X release failed (%d)\n", > + err); > + } > > /* Disable the device */ > - xen_pcibk_reset_device(psdev->dev); > + xen_pcibk_reset_device(dev); > > kfree(dev_data); > - pci_set_drvdata(psdev->dev, NULL); > + pci_set_drvdata(dev, NULL); > > /* Clean-up the device */ > - xen_pcibk_config_free_dyn_fields(psdev->dev); > - xen_pcibk_config_free_dev(psdev->dev); > + xen_pcibk_config_free_dyn_fields(dev); > + xen_pcibk_config_free_dev(dev); > > - psdev->dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED; > - pci_dev_put(psdev->dev); > + dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED; > + pci_dev_put(dev); > > kfree(psdev); > } > @@ -355,6 +371,19 @@ static int pcistub_init_device(struct pc > if (err) > goto config_release; > > + if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { > + struct physdev_pci_device ppdev = { > + .seg = pci_domain_nr(dev->bus), > + .bus = dev->bus->number, > + .devfn = dev->devfn > + }; > + > + err = HYPERVISOR_physdev_op(PHYSDEVOP_prepare_msix, &ppdev); > + if (err) > + dev_err(&dev->dev, "MSI-X preparation failed (%d)\n", > + err); > + } > + > /* We need the device active to save the state. */ > dev_dbg(&dev->dev, "save state of device\n"); > pci_save_state(dev); > --- 3.8-rc6/include/xen/interface/physdev.h > +++ 3.8-rc6-xen-pciback-MSI-X-prepare/include/xen/interface/physdev.h > @@ -251,6 +251,12 @@ struct physdev_pci_device_add { > > #define PHYSDEVOP_pci_device_remove 26 > #define PHYSDEVOP_restore_msi_ext 27 > +/* > + * Dom0 should use these two to announce MMIO resources assigned to > + * MSI-X capable devices won''t (prepare) or may (release) change. > + */ > +#define PHYSDEVOP_prepare_msix 30 > +#define PHYSDEVOP_release_msix 31 > struct physdev_pci_device { > /* IN */ > uint16_t seg; > >> xen-pciback: notify hypervisor about devices intended to be assigned to guests > > For MSI-X capable devices the hypervisor wants to write protect the > MSI-X table and PBA, yet it can''t assume that resources have been > assigned to their final values at device enumeration time. Thus have > pciback do that notification, as having the device controlled by it is > a prerequisite to assigning the device to guests anyway. > > Signed-off-by: Jan Beulich <jbeulich@suse.com> > > --- > arch/x86/include/asm/xen/hypercall.h | 4 +- > drivers/xen/fallback.c | 3 + > drivers/xen/xen-pciback/pci_stub.c | 59 ++++++++++++++++++++++++++--------- > include/xen/interface/physdev.h | 6 +++ > 4 files changed, 54 insertions(+), 18 deletions(-) > > --- 3.8-rc6/arch/x86/include/asm/xen/hypercall.h > +++ 3.8-rc6-xen-pciback-MSI-X-prepare/arch/x86/include/asm/xen/hypercall.h > @@ -382,14 +382,14 @@ HYPERVISOR_console_io(int cmd, int count > return _hypercall3(int, console_io, cmd, count, str); > } > > -extern int __must_check HYPERVISOR_physdev_op_compat(int, void *); > +extern int __must_check xen_physdev_op_compat(int, void *); > > static inline int > HYPERVISOR_physdev_op(int cmd, void *arg) > { > int rc = _hypercall2(int, physdev_op, cmd, arg); > if (unlikely(rc == -ENOSYS)) > - rc = HYPERVISOR_physdev_op_compat(cmd, arg); > + rc = xen_physdev_op_compat(cmd, arg); > return rc; > } > > --- 3.8-rc6/drivers/xen/fallback.c > +++ 3.8-rc6-xen-pciback-MSI-X-prepare/drivers/xen/fallback.c > @@ -44,7 +44,7 @@ int xen_event_channel_op_compat(int cmd, > } > EXPORT_SYMBOL_GPL(xen_event_channel_op_compat); > > -int HYPERVISOR_physdev_op_compat(int cmd, void *arg) > +int xen_physdev_op_compat(int cmd, void *arg) > { > struct physdev_op op; > int rc; > @@ -78,3 +78,4 @@ int HYPERVISOR_physdev_op_compat(int cmd > > return rc; > } > +EXPORT_SYMBOL_GPL(xen_physdev_op_compat); > --- 3.8-rc6/drivers/xen/xen-pciback/pci_stub.c > +++ 3.8-rc6-xen-pciback-MSI-X-prepare/drivers/xen/xen-pciback/pci_stub.c > @@ -17,6 +17,7 @@ > #include <xen/events.h> > #include <asm/xen/pci.h> > #include <asm/xen/hypervisor.h> > +#include <xen/interface/physdev.h> > #include "pciback.h" > #include "conf_space.h" > #include "conf_space_quirks.h" > @@ -85,37 +86,52 @@ static struct pcistub_device *pcistub_de > static void pcistub_device_release(struct kref *kref) > { > struct pcistub_device *psdev; > + struct pci_dev *dev; > struct xen_pcibk_dev_data *dev_data; > > psdev = container_of(kref, struct pcistub_device, kref); > - dev_data = pci_get_drvdata(psdev->dev); > + dev = psdev->dev; > + dev_data = pci_get_drvdata(dev); > > - dev_dbg(&psdev->dev->dev, "pcistub_device_release\n"); > + dev_dbg(&dev->dev, "pcistub_device_release\n"); > > - xen_unregister_device_domain_owner(psdev->dev); > + xen_unregister_device_domain_owner(dev); > > /* Call the reset function which does not take lock as this > * is called from "unbind" which takes a device_lock mutex. > */ > - __pci_reset_function_locked(psdev->dev); > - if (pci_load_and_free_saved_state(psdev->dev, > - &dev_data->pci_saved_state)) { > - dev_dbg(&psdev->dev->dev, "Could not reload PCI state\n"); > - } else > - pci_restore_state(psdev->dev); > + __pci_reset_function_locked(dev); > + if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state)) > + dev_dbg(&dev->dev, "Could not reload PCI state\n"); > + else > + pci_restore_state(dev); > + > + if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { > + struct physdev_pci_device ppdev = { > + .seg = pci_domain_nr(dev->bus), > + .bus = dev->bus->number, > + .devfn = dev->devfn > + }; > + int err = HYPERVISOR_physdev_op(PHYSDEVOP_release_msix, > + &ppdev); > + > + if (err) > + dev_warn(&dev->dev, "MSI-X release failed (%d)\n", > + err); > + }Perhaps it should be more off: if (err) { if (err == -ENOSYS) dev_info(&dev->dev,"MSI-X release hypercall not supported."); else dev_warn(&dev->dev, "MSI-X release failed (%d)\n", err);> > /* Disable the device */ > - xen_pcibk_reset_device(psdev->dev); > + xen_pcibk_reset_device(dev); > > kfree(dev_data); > - pci_set_drvdata(psdev->dev, NULL); > + pci_set_drvdata(dev, NULL); > > /* Clean-up the device */ > - xen_pcibk_config_free_dyn_fields(psdev->dev); > - xen_pcibk_config_free_dev(psdev->dev); > + xen_pcibk_config_free_dyn_fields(dev); > + xen_pcibk_config_free_dev(dev); > > - psdev->dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED; > - pci_dev_put(psdev->dev); > + dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED; > + pci_dev_put(dev); > > kfree(psdev); > } > @@ -355,6 +371,19 @@ static int pcistub_init_device(struct pc > if (err) > goto config_release; > > + if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { > + struct physdev_pci_device ppdev = { > + .seg = pci_domain_nr(dev->bus), > + .bus = dev->bus->number, > + .devfn = dev->devfn > + }; > + > + err = HYPERVISOR_physdev_op(PHYSDEVOP_prepare_msix, &ppdev); > + if (err) > + dev_err(&dev->dev, "MSI-X preparation failed (%d)\n", > + err); > + } > + > /* We need the device active to save the state. */ > dev_dbg(&dev->dev, "save state of device\n"); > pci_save_state(dev); > --- 3.8-rc6/include/xen/interface/physdev.h > +++ 3.8-rc6-xen-pciback-MSI-X-prepare/include/xen/interface/physdev.h > @@ -251,6 +251,12 @@ struct physdev_pci_device_add { > > #define PHYSDEVOP_pci_device_remove 26 > #define PHYSDEVOP_restore_msi_ext 27 > +/* > + * Dom0 should use these two to announce MMIO resources assigned to > + * MSI-X capable devices won''t (prepare) or may (release) change. > + */ > +#define PHYSDEVOP_prepare_msix 30 > +#define PHYSDEVOP_release_msix 31 > struct physdev_pci_device { > /* IN */ > uint16_t seg;
Jan Beulich
2013-Feb-07 09:00 UTC
Re: [PATCH] xen-pciback: notify hypervisor about devices intended to be assigned to guests
>>> On 06.02.13 at 18:12, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: >> + if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { >> + struct physdev_pci_device ppdev = { >> + .seg = pci_domain_nr(dev->bus), >> + .bus = dev->bus->number, >> + .devfn = dev->devfn >> + }; >> + int err = HYPERVISOR_physdev_op(PHYSDEVOP_release_msix, >> + &ppdev); >> + >> + if (err) >> + dev_warn(&dev->dev, "MSI-X release failed (%d)\n", >> + err); >> + } > > Perhaps it should be more off: > > if (err) { > if (err == -ENOSYS) > dev_info(&dev->dev,"MSI-X release > hypercall not supported."); > else > dev_warn(&dev->dev, "MSI-X release failed (%d)\n", > err); >Why would you want to special case this? The more that _really_ old hypervisors returned -EINVAL instead of -ENOSYS here? Jan