thr3ads.net - freebsd stable - ZFS corruption due to lack of space? [Oct 2012]

If this information is useful, please help other people find it:
Share via:

Steven Hartland

2012-Oct-31 17:55 UTC

ZFS corruption due to lack of space?

Other info:
zpool list tank2
NAME    SIZE  ALLOC   FREE    CAP  DEDUP  HEALTH  ALTROOT
tank2    19T  18.7T   304G    98%  1.00x  ONLINE  -

zfs list tank2
NAME    USED  AVAIL  REFER  MOUNTPOINT
tank2  13.3T      0  13.3T  /tank2

Running: 8.3-RELEASE-p4, zpool: v28, zfs: v5


----- Original Message ----- 
From: "Steven Hartland" <steven at multiplay.co.uk>
To: <freebsd-stable at freebsd.org>; <freebsd-fs at FreeBSD.ORG>
Sent: Wednesday, October 31, 2012 5:25 PM
Subject: ZFS corruption due to lack of space?

> Been running some tests on new hardware here to verify all
> is good. One of the tests was to fill the zfs array which
> seems like its totally corrupted the tank.
> 
> The HW is 7 x 3TB disks in RAIDZ2 with dual 13GB ZIL
> partitions and dual 100GB L2ARC on Enterprise SSD's.
> 
> All disks are connected to an LSI 2208 RAID controller
> run by mfi driver. HD's via a SAS2X28 backplane and
> SSD's via a passive blackplane backplane.
> 
> The file system has 31 test files most random data from
> /dev/random and one blank from /dev/zero.
> 
> The test running was multiple ~20 dd's under screen with
> all but one from /dev/random and to final one from /dev/zero
> 
> e.g. dd if=/dev/random bs=1m of=/tank2/random10
> 
> No hardware errors have raised, so no disk timeouts etc.
> 
> On completion each dd reported no space as you would expect
> e.g. dd if=/dev/random bs=1m of=/tank2/random13
> dd: /tank2/random13: No space left on device
> 503478+0 records in
> 503477+0 records out
> 527933898752 bytes transferred in 126718.731762 secs (4166187 bytes/sec)
> You have new mail.
> 
> At that point with the test seemingly successful I went
> to delete test files which resulted in:-
> rm random*
> rm: random1: Unknown error: 122
> rm: random10: Unknown error: 122
> rm: random11: Unknown error: 122
> rm: random12: Unknown error: 122
> rm: random13: Unknown error: 122
> rm: random14: Unknown error: 122
> rm: random18: Unknown error: 122
> rm: random2: Unknown error: 122
> rm: random3: Unknown error: 122
> rm: random4: Unknown error: 122
> rm: random5: Unknown error: 122
> rm: random6: Unknown error: 122
> rm: random7: Unknown error: 122
> rm: random9: Unknown error: 122
> 
> Error 122 I assume is ECKSUM
> 
> At this point the pool was showing checksum errors
> zpool status
>  pool: tank
> state: ONLINE
>  scan: none requested
> config:
> 
>        NAME                                            STATE     READ WRITE
CKSUM
>        tank                                            ONLINE       0     0
0
>          mirror-0                                      ONLINE       0     0
0
>            gptid/41fb7e5c-21cf-11e2-92a3-002590881138  ONLINE       0     0
0
>            gptid/42a1b53c-21cf-11e2-92a3-002590881138  ONLINE       0     0
0
> 
> errors: No known data errors
> 
>  pool: tank2
> state: ONLINE
> status: One or more devices has experienced an error resulting in data
>        corruption.  Applications may be affected.
> action: Restore the file in question if possible.  Otherwise restore the
>        entire pool from backup.
>   see: http://www.sun.com/msg/ZFS-8000-8A
>  scan: none requested
> config:
> 
>        NAME           STATE     READ WRITE CKSUM
>        tank2          ONLINE       0     0 4.22K
>          raidz2-0     ONLINE       0     0 16.9K
>            mfisyspd0  ONLINE       0     0     0
>            mfisyspd1  ONLINE       0     0     0
>            mfisyspd2  ONLINE       0     0     0
>            mfisyspd3  ONLINE       0     0     0
>            mfisyspd4  ONLINE       0     0     0
>            mfisyspd5  ONLINE       0     0     0
>            mfisyspd6  ONLINE       0     0     0
>        logs
>          mfisyspd7p3  ONLINE       0     0     0
>          mfisyspd8p3  ONLINE       0     0     0
>        cache
>          mfisyspd9    ONLINE       0     0     0
>          mfisyspd10   ONLINE       0     0     0
> 
> errors: Permanent errors have been detected in the following files:
> 
>        tank2:<0x3>
>        tank2:<0x8>
>        tank2:<0x9>
>        tank2:<0xa>
>        tank2:<0xb>
>        tank2:<0xf>
>        tank2:<0x10>
>        tank2:<0x11>
>        tank2:<0x12>
>        tank2:<0x13>
>        tank2:<0x14>
>        tank2:<0x15>
> 
> So I tried a scrub, which looks like its going to
> take 5 days to complete and is reporting many many more
> errors:-
> 
>  pool: tank2
> state: ONLINE
> status: One or more devices has experienced an error resulting in data
>        corruption.  Applications may be affected.
> action: Restore the file in question if possible.  Otherwise restore the
>        entire pool from backup.
>   see: http://www.sun.com/msg/ZFS-8000-8A
>  scan: scrub in progress since Wed Oct 31 16:13:53 2012
>        118G scanned out of 18.7T at 42.2M/s, 128h19m to go
>        49.0M repaired, 0.62% done
> config:
> 
>        NAME           STATE     READ WRITE CKSUM
>        tank2          ONLINE       0     0  596K
>          raidz2-0     ONLINE       0     0 1.20M
>            mfisyspd0  ONLINE       0     0     0  (repairing)
>            mfisyspd1  ONLINE       0     0     0  (repairing)
>            mfisyspd2  ONLINE       0     0     0  (repairing)
>            mfisyspd3  ONLINE       0     0     2  (repairing)
>            mfisyspd4  ONLINE       0     0     1  (repairing)
>            mfisyspd5  ONLINE       0     0     0  (repairing)
>            mfisyspd6  ONLINE       0     0     1  (repairing)
>        logs
>          mfisyspd7p3  ONLINE       0     0     0
>          mfisyspd8p3  ONLINE       0     0     0
>        cache
>          mfisyspd9    ONLINE       0     0     0
>          mfisyspd10   ONLINE       0     0     0
> 
> errors: 596965 data errors, use '-v' for a list
> 
> 
> At this point I decided to cancel the scrub but no joy on that
> 
> zpool scrub -s tank2
> cannot cancel scrubbing tank2: out of space
> 
> So questions:-
> 
> 1. Given the information it seems like the multiple writes filling
> the disk may have caused metadata corruption?
> 2. Is there anyway to stop the scrub?
> 3. Surely low space should never prevent stopping a scrub?

===============================================This e.mail is private and
confidential between Multiplay (UK) Ltd. and the person or entity to whom it is
addressed. In the event of misdirection, the recipient is prohibited from using,
copying, printing or otherwise disseminating it or any information contained in
it.

In the event of misdirection, illegible or incomplete transmission please
telephone +44 845 868 1337
or return the E.mail to postmaster at multiplay.co.uk.

Artem Belevich

2012-Oct-31 20:48 UTC

head link

ZFS corruption due to lack of space?

On Wed, Oct 31, 2012 at 10:55 AM, Steven Hartland
<killing at multiplay.co.uk> wrote:> At that point with the test seemingly successful I went
> to delete test files which resulted in:-
> rm random*
> rm: random1: Unknown error: 122
ZFS is a logging filesystem. Even removing a file apparently requires
some space to write a new record saying that the file is not
referenced any more.

One way out of this jam is to try truncating some large file in place.
Make sure that file is not part of any snapshot.
Something like this may do the trick:
#dd if=/dev/null of=existing_large_file

Or, perhaps even something as simple as 'echo -n > large_file' may
work.

Good luck,
--Artem

Peter Jeremy

2012-Oct-31 21:23 UTC

head link

ZFS corruption due to lack of space?

On 2012-Oct-31 17:25:09 -0000, Steven Hartland <steven at multiplay.co.uk>
wrote:>Been running some tests on new hardware here to verify all
>is good. One of the tests was to fill the zfs array which
>seems like its totally corrupted the tank.
I've accidently "filled" a pool, and had multiple processes try to
write to the full pool, without either emptying the free space reserve
(so I could still delete the offending files) or corrupting the pool.

Had you tried to read/write the raw disks before you tried the
ZFS testing?  Do you have compression and/or dedupe enabled on
the pool?
>1. Given the information it seems like the multiple writes filling
>the disk may have caused metadata corruption?
I don't recall seeing this reported before.
>2. Is there anyway to stop the scrub?
Other than freeing up some space, I don't think so.  If this is a test
pool that you don't need, you could try destroying it and re-creating
it - that may be quicker and easier than recovering the existing pool.
>3. Surely low space should never prevent stopping a scrub?
As Artem noted, ZFS is a copy-on-write filesystem.  It is supposed to
reserve some free space to allow metadata updates (stop scrubs, delete
files, etc) even when it is "full" but I have seen reports of this not
working correctly in the past.  A truncate-in-place may work.

You could also try asking on zfs-discuss at opensolaris.org 

-- 
Peter Jeremy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
URL:
<http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20121101/d97b6f8b/attachment.sig>

freebsd stable - Oct 2012 - ZFS corruption due to lack of space?

ZFS corruption due to lack of space?

ZFS corruption due to lack of space?

ZFS corruption due to lack of space?