Hi Guys, I have compiled lustre client 1.8.4 with the following options: ./configure --disable-server --with-linux=/usr/src/linux-2.6.32.12-0.7 --with-linux-obj=/usr/src/linux-2.6.32.12-0.7-obj/x86_64/default --with-linux-config=/boot/config-2.6.32.12-0.7-default --with-o2ib --enable-quota uname (SLES 11 SP 1): Linux node205 2.6.32.12-0.7-default #1 SMP 2010-05-20 11:14:20 +0200 x86_64 x86_64 x86_64 GNU/Linux The only problem that I saw during the configure/make was: ..snip.. *** You have not yet configured your kernel! *** (missing kernel config file ".config") *** *** Please run some configurator (e.g. "make oldconfig" or *** "make menuconfig" or "make xconfig"). *** ..snip.. However the build did not fail so I thought this was okay. Now that everything has been built I am try to load the lustre module but keep getting this error: -- node205:~ # modprobe lustre WARNING: Error inserting osc (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/osc.ko): Input/output error WARNING: Error inserting mdc (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/mdc.ko): Input/output error WARNING: Error inserting lov (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lov.ko): Input/output error FATAL: Error inserting lustre (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lustre.ko): Input/output error -- I do have lustre installed under the correct path I believe: node205:/lib # find . -name "lustre.ko" ./modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lustre.ko Am I missing some step here? Any help would be greatly appreciated. Thanks, -J -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20101027/298fcd4c/attachment.html
Also just to point out I am using OFED 1.5.1. -J On Wed, Oct 27, 2010 at 3:16 PM, Jagga Soorma <jagga13 at gmail.com> wrote:> Hi Guys, > > I have compiled lustre client 1.8.4 with the following options: > > ./configure --disable-server --with-linux=/usr/src/linux-2.6.32.12-0.7 > --with-linux-obj=/usr/src/linux-2.6.32.12-0.7-obj/x86_64/default > --with-linux-config=/boot/config-2.6.32.12-0.7-default --with-o2ib > --enable-quota > > uname (SLES 11 SP 1): > Linux node205 2.6.32.12-0.7-default #1 SMP 2010-05-20 11:14:20 +0200 x86_64 > x86_64 x86_64 GNU/Linux > > The only problem that I saw during the configure/make was: > > ..snip.. > *** You have not yet configured your kernel! > *** (missing kernel config file ".config") > *** > *** Please run some configurator (e.g. "make oldconfig" or > *** "make menuconfig" or "make xconfig"). > *** > ..snip.. > > However the build did not fail so I thought this was okay. Now that > everything has been built I am try to load the lustre module but keep > getting this error: > > -- > node205:~ # modprobe lustre > WARNING: Error inserting osc > (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/osc.ko): > Input/output error > WARNING: Error inserting mdc > (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/mdc.ko): > Input/output error > WARNING: Error inserting lov > (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lov.ko): > Input/output error > FATAL: Error inserting lustre > (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lustre.ko): > Input/output error > -- > > I do have lustre installed under the correct path I believe: > > node205:/lib # find . -name "lustre.ko" > ./modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lustre.ko > > Am I missing some step here? Any help would be greatly appreciated. > > Thanks, > -J >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lustre.org/pipermail/lustre-discuss/attachments/20101027/6288d0c1/attachment.html
The following works for me every-time (redhat based client) : /usr/local/src/lustre-1.8.4# ./configure --with-linux=/usr/src/kernels/2.6.18-194.17.4.el5-x86_64 && make rpms then install rpms echo "options lnet networks=tcp0" >> /etc/modprobe.conf reboot or ''depmod && modprobe lnet'' you should be able to mount your lustre fs now. hth, Mark. On 28/10/2010, at 8:46 AM, Jagga Soorma wrote:> Hi Guys, > > I have compiled lustre client 1.8.4 with the following options: > > ./configure --disable-server --with-linux=/usr/src/linux-2.6.32.12-0.7 --with-linux-obj=/usr/src/linux-2.6.32.12-0.7-obj/x86_64/default --with-linux-config=/boot/config-2.6.32.12-0.7-default --with-o2ib --enable-quota > > uname (SLES 11 SP 1): > Linux node205 2.6.32.12-0.7-default #1 SMP 2010-05-20 11:14:20 +0200 x86_64 x86_64 x86_64 GNU/Linux > > The only problem that I saw during the configure/make was: > > ..snip.. > *** You have not yet configured your kernel! > *** (missing kernel config file ".config") > *** > *** Please run some configurator (e.g. "make oldconfig" or > *** "make menuconfig" or "make xconfig"). > *** > ..snip.. > > However the build did not fail so I thought this was okay. Now that everything has been built I am try to load the lustre module but keep getting this error: > > -- > node205:~ # modprobe lustre > WARNING: Error inserting osc (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/osc.ko): Input/output error > WARNING: Error inserting mdc (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/mdc.ko): Input/output error > WARNING: Error inserting lov (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lov.ko): Input/output error > FATAL: Error inserting lustre (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lustre.ko): Input/output error > -- > > I do have lustre installed under the correct path I believe: > > node205:/lib # find . -name "lustre.ko" > ./modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lustre.ko > > Am I missing some step here? Any help would be greatly appreciated. > > Thanks, > -J > _______________________________________________ > Lustre-discuss mailing list > Lustre-discuss at lists.lustre.org > http://lists.lustre.org/mailman/listinfo/lustre-discuss-------------- next part -------------- A non-text attachment was scrubbed... Name: PGP.sig Type: application/pgp-signature Size: 194 bytes Desc: This is a digitally signed message part Url : http://lists.lustre.org/pipermail/lustre-discuss/attachments/20101028/32559187/attachment.bin
Brian J. Murrell
2010-Oct-28 05:28 UTC
[Lustre-discuss] Lustre Patchless Client build issues.
On Wed, 2010-10-27 at 15:16 -0700, Jagga Soorma wrote:> Hi Guys,Hi,> I have compiled lustre client 1.8.4 with the following options: > > ./configure --disable-server --with-linux=/usr/src/linux-2.6.32.12-0.7 > --with-linux-obj=/usr/src/linux-2.6.32.12-0.7-obj/x86_64/default > --with-linux-config=/boot/config-2.6.32.12-0.7-default --with-o2ib > --enable-quotaYou really shouldn''t need the --with-linux-config option.> I am try to load the lustre module but keep > getting this error: > > -- > node205:~ # modprobe lustre > WARNING: Error inserting osc > (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/osc.ko): > Input/output error > WARNING: Error inserting mdc > (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/mdc.ko): > Input/output error > WARNING: Error inserting lov > (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lov.ko): > Input/output error > FATAL: Error inserting lustre > (/lib/modules/2.6.32.12-0.7-default/updates/kernel/fs/lustre/lustre.ko): > Input/output error> Am I missing some step here? Any help would be greatly appreciated.You really have not provided enough information to know what the problem is. Did you check the syslog and/or kernel messages buffer for additional information? b.