For awhile now, my home server has been acting up. Actually it had a bad
set of RAM long ago, replaced and it and worked fine. It's been weird again
now, and I've found this in dmesg:
MCA: Bank 0, Status 0xf200000000000800
MCA: Global Cap 0x0000000000000806, Status 0x0000000000000000
MCA: Vendor "GenuineIntel", ID 0x6fb, APIC ID 2
MCA: CPU 2 UNCOR PCC OVER BUSL0 Source ERR Memory
MCA: Bank 0, Status 0xf200000000000800
MCA: Global Cap 0x0000000000000806, Status 0x0000000000000000
MCA: Vendor "GenuineIntel", ID 0x6fb, APIC ID 3
MCA: CPU 3 UNCOR PCC OVER BUSL0 Source ERR Memory
I really don't know what MCA is, but that looks like possibility bad RAM
again. I have some other DIMM's I can try, but I was hoping someone had
some info on exactly what those messages mean. One concern is the
motherboard bad, and hosing the memory.
Some more info:
FreeBSD vbox.galacticdominator.com 8.1-STABLE FreeBSD 8.1-STABLE #0: Mon
Aug 2 11:19:16 CDT 2010
adam@vbox.galacticdominator.com:/usr/obj/usr/src/sys/GENERIC
amd64
smbios.bios.reldate="01/22/2008"
smbios.bios.vendor="Phoenix Technologies, LTD"
smbios.bios.version="6.00 PG"
smbios.chassis.maker="NVIDIA"
smbios.chassis.serial=" "
smbios.chassis.tag=" "
smbios.chassis.version="NFORCE 680i LT SLI"
smbios.memory.enabled="4194304"
smbios.planar.maker="NVIDIA"
smbios.planar.product="NFORCE 680i LT SLI"
smbios.planar.serial="1"
smbios.planar.version="2"
smbios.socket.enabled="1"
smbios.socket.populated="1"
smbios.system.maker="NVIDIA"
smbios.system.product="NFORCE 680i LT SLI"
smbios.system.serial="1"
smbios.system.uuid="86fe600d-034b-0400-0000-000000000000"
smbios.system.version="2"
smbios.version="2.4"
Normal dmesg:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE #0: Mon Aug 2 11:19:16 CDT 2010
adam@vbox.galacticdominator.com:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2700.03-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping
= 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4073664512 (3884 MB)
ACPI APIC Table: <Nvidia NVDAACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 4
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia NVDAACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, afdf0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff on
acpi0
device_attach: acpi_hpet0 attach returned 12
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pci0: <memory, RAM> at device 2.0 (no driver attached)
pci0: <memory, RAM> at device 2.1 (no driver attached)
pci0: <memory, RAM> at device 2.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x8c00-0x8c7f mem
0xcc000000-0xccffffff,0xb0000000-0xbfffffff,0xcd000000-0xcdffffff irq 16 at
device 0.0 on pci1
nvidia0: <GeForce 7600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0xfc00-0xfc7f at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
ohci0: <nVidia nForce MCP55 USB Controller> mem 0xcffff000-0xcfffffff irq
20
at device 11.0 on pci0
ohci0: [ITHREAD]
usbus0: <nVidia nForce MCP55 USB Controller> on ohci0
ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xcfffe000-0xcfffe0ff
irq 21 at device 11.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <NVIDIA nForce MCP55 USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP55 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xec00-0xec0f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem
0xcfffd000-0xcfffdfff irq 22 at device 14.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem
0xcfffc000-0xcfffcfff irq 23 at device 14.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port
0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb00f mem
0xcfffb000-0xcfffbfff irq 20 at device 14.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xcfeff000-0xcfeff7ff,0xcfef8000-0xcfefbfff irq 19 at device 7.0 on pci2
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 0d:60:fe:86:00:04:4b:03
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0e:60:fe:04:4b:03
fwe0: Ethernet address: 0e:60:fe:04:4b:03
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 0d:60:fe:86:00:04:4b:03 @ 0xfffe00000000, S400,
maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xa60c4000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER
mode
xl0: <3Com 3c900B-TPO Etherlink XL> port 0x9c00-0x9c7f mem
0xcfefe000-0xcfefe07f irq 18 at device 10.0 on pci2
xl0: selecting 10baseT transceiver, half duplex
xl0: Ethernet address: 00:04:76:d2:50:25
xl0: [ITHREAD]
hdac0: <NVidia MCP55 High Definition Audio Controller> mem
0xcfff4000-0xcfff7fff irq 21 at device 15.1 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xac00-0xac07 mem
0xcfffa000-0xcfffafff,0xcfff9000-0xcfff90ff,0xcfff8000-0xcfff800f irq 22 at
device 18.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 2 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe0: Ethernet address: 00:04:4b:04:01:28
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FILTER]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd57ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 9210921060c061b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 9210921060c061b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 9210921060c061b
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 9210921060c061b
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
ZFS filesystem version 3
ZFS storage pool version 14
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x25b offMax=0x159f
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 10 ports with 10 removable, self powered
acd0: DVDR <HL-DT-ST DVDRAM GH22NS50/TN00> at ata2-master UDMA100 SATA
1.5Gb/s
ad8: 953869MB <WDC WD1001FALS-00J7B1 05.00K05> at ata4-master UDMA100 SATA
3Gb/s
ad12: 76319MB <INTEL SSDSA2MH080G1GN 045C8610> at ata6-master UDMA100 SATA
3Gb/s
ad14: 953869MB <Seagate ST31000528AS CC37> at ata7-master UDMA100 SATA
3Gb/s
hdac0: HDA Codec #0: Realtek ALC885
pcm0: <HDA Realtek ALC885 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC885 PCM #1 Digital> at cad 0 nid 1 on hdac0
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00
0x01
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH22NS50 TN00> Removable CD-ROM SCSI-0 device
cd0: 100.000MB/s transfers
cd0: cd present [3073 x 2048 byte records]
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Root mount waiting for: usbus1
uhub1: 10 ports with 10 removable, self powered
Trying to mount root from zfs:tank
GEOM: zvol/tank/usr/home/django-zvols1: geometry does not match label
(16h,63s != 255h,63s).
GEOM: zvol/tank/usr/home/horde-zvols1: geometry does not match label
(16h,63s != 255h,63s).
vboxnet0: Ethernet address: 0a:00:27:00:00:00
nfe0: link state changed to UP
nfe0: promiscuous mode enabled
--
Adam Vande More