Michael Butler
2005-Nov-01 08:54 UTC
6.x-RC1 instability with HighPoint HPT372N UDMA133 controller
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I just upgraded this thing to RELENG_6 and have all manner of issues when there are a lot of files to be removed; as is typical when I do the recommended "portupgrade -af" so as to remove all of the references to RELENG_5 libraries. With Soren's ata-mk3n patch-kit on RELENG_5, I got a panic along with "FAILURE - out of memory in ata_raid_init_request". With RELENG_6, I just get a spontaneous reboot; no messages to speak of (and it's remote so I can't see the console :-(). This is a cpu and memory-constrained machine with 4 drives configured using RAID 0+1 .. dmesg as follows .. suggestions? Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 ~ The Regents of the University of California. All rights reserved. FreeBSD 6.0-RC1 #3: Mon Oct 31 06:46:37 EST 2005 ~ imb@mail.auburn.protected-networks.net:/usr/obj/usr/src/sys/AUBURN Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (349.88-MHz 686-class CPU) ~ Origin = "GenuineIntel" Id = 0x651 Stepping = 1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 402653184 (384 MB) avail memory = 388767744 (370 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1000-0x100f at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1020-0x103f irq 9 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered intpm0: <Intel 82371AB Power management controller> port 0x7000-0x700f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 7000 intpm0: intr IRQ 9 enabled revision 0 intpm0: [GIANT-LOCKED] intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus1: <System Management Bus> on intsmb0 smb0: <SMBus generic I/O> on smbus1 intpm0: PM I/O mapped 8000 atapci1: <HighPoint HPT372N UDMA133 controller> port 0x1040-0x1047,0x1014-0x1017,0x1018-0x101f, 0x1010-0x1013,0x1400-0x14ff irq 11 at device 13.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 ahc0: <Adaptec 2930CU SCSI adapter> port 0x1800-0x18ff mem 0xd0000000-0xd0000fff irq 10 at device 14.0 on pci0 ahc0: [GIANT-LOCKED] aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x1080-0x10ff mem 0xd0001000-0xd000107f irq 5 at device 15.0 on pci0 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:5a:17:a3:79 pci0: <multimedia, audio> at device 16.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc000-0xcc7ff, 0xdc000-0xdffff,0xe4000-0xeffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 349880525 Hz quality 800 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging unlimited Waiting 5 seconds for SCSI devices to settle acd0: CDROM <NEC CD-ROM DRIVE:28D/3.03> at ata1-master UDMA33 ad4: 152627MB <SAMSUNG SP1604N TM100-24> at ata2-master UDMA133 ad5: 152627MB <SAMSUNG SP1604N TM100-24> at ata2-slave UDMA133 ad6: 152627MB <SAMSUNG SP1604N TM100-24> at ata3-master UDMA133 ad7: 152627MB <SAMSUNG SP1604N TM100-24> at ata3-slave UDMA133 sa0 at ahc0 bus 0 target 0 lun 0 sa0: <HP C1537A L706> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) pass1 at ata1 bus 0 target 0 lun 0 pass1: <NEC CD-ROM DRIVE:28D 3.03> Removable CD-ROM SCSI-0 device pass1: 33.000MB/s transfers ar0: 305255MB <HighPoint v2 RocketRAID RAID0+1 (stripe 64 KB)> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (master) using ad5 at ata2-slave ar0: disk2 READY (mirror) using ad6 at ata3-master ar0: disk3 READY (mirror) using ad7 at ata3-slave Trying to mount root from ufs:/dev/ar0s1a -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (MingW32) iD8DBQFDZ52aiJykeV6HPMURAl7QAJ97CPsPu0V86o/JwAo8h/2lVnbEtwCgkSsj sqeyzK6yD0bHqiyPja6+ZkQ=WZ3y -----END PGP SIGNATURE-----