thr3ads.net - freebsd stable - Proliant 380 G4 [Jun 2005]

If this information is useful, please help other people find it:
Share via:

Palle Girgensohn

2005-Jun-15 16:03 UTC

Proliant 380 G4

Hi!

Just a quick check - a client is getting a Proliant 380 G4 with a "6i"
Raid
controller. Haven't used this hardware before. Will it work fine with 
FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or 
things to think about?

Any input appreciated!

Thanks
Palle

Ulf Zimmermann

2005-Jun-15 17:17 UTC

head link

Proliant 380 G4

On Wed, Jun 15, 2005 at 06:03:31PM +0200, Palle Girgensohn
wrote:> Hi!
> 
> Just a quick check - a client is getting a Proliant 380 G4 with a
"6i" Raid
> controller. Haven't used this hardware before. Will it work fine with 
> FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or 
> things to think about?
> 
> Any input appreciated!
> 
> Thanks
> Palle
I run 5.3-Release on my DL380g3 with a SmartArray 6402, which is basicly
the same controller as the 6i (just not embedded, it is a PCI-X card).

No problems whatsoever.

-- 
Regards, Ulf.

---------------------------------------------------------------------
Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-865-0204
You can find my resume at: http://seven.Alameda.net/~ulf/resume.html

Christian Brueffer

2005-Jun-15 17:27 UTC

head link

Proliant 380 G4

On Wed, Jun 15, 2005 at 06:03:31PM +0200, Palle Girgensohn
wrote:> Hi!
> 
> Just a quick check - a client is getting a Proliant 380 G4 with a
"6i" Raid
> controller. Haven't used this hardware before. Will it work fine with 
> FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or 
> things to think about?
> 
The card is listed as supported in the ciss(4) manpage.

- Christian

-- 
Christian Brueffer	chris@unixpages.org	brueffer@FreeBSD.org
GPG Key:	 http://people.freebsd.org/~brueffer/brueffer.key.asc
GPG Fingerprint: A5C8 2099 19FF AACA F41B  B29B 6C76 178C A0ED 982D
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20050615/373192b3/attachment.bin

Oliver Fromme

2005-Jun-15 17:44 UTC

head link

Proliant 380 G4

Palle Girgensohn <girgen@freebsd.org> wrote:
 > Just a quick check - a client is getting a Proliant 380 G4 with a
"6i" Raid
 > controller. Haven't used this hardware before. Will it work fine with 
 > FreeBSD? Which version will work best, 5.4 or 4.11? Any peculiarities or 
 > things to think about?
 > 
 > Any input appreciated!

It's not supported under 4.x:

pci2: <unknown card> (vendor=0x0e11, dev=0x0046) at 1.0 irq 5

At a customer of ours we're currently forced to run Linux
on the newer Proliants because of that problem (FreeBSD
5.x is currently not an option for that customer).

Best regards
   Oliver

-- 
Oliver Fromme, secnetix GmbH & Co KG, Oettingenstr. 2, 80538 M?nchen
Any opinions expressed in this message may be personal to the author
and may not necessarily reflect the opinions of secnetix in any way.

"[...]  one observation we can make here is that Python makes
an excellent pseudocoding language, with the wonderful attribute
that it can actually be executed."  --  Bruce Eckel

Philippe PEGON

2005-Jun-15 18:14 UTC

head link

Proliant 380 G4

Palle Girgensohn a ?crit :> Hi!
> 
> Just a quick check - a client is getting a Proliant 380 G4 with a
"6i"
> Raid controller. Haven't used this hardware before. Will it work fine 
> with FreeBSD? Which version will work best, 5.4 or 4.11? Any 
> peculiarities or things to think about?
> 
> Any input appreciated!
we have 3 Proliant 380 G4 and hardware works fine. For your information, I
attach a dmesg of one of
them. I've just another problem, but I don't think that it comes from
hardware :

http://lists.freebsd.org/pipermail/freebsd-stable/2005-June/015952.html
> 
> Thanks
> Palle
--
Philippe PEGON
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #3: Thu May 19 20:35:36 CEST 2005
    root@crc.u-strasbg.fr:/usr/obj/usr/src/sys/NS1A
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.15-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 2147430400 (2047 MB)
avail memory = 2095968256 (1998 MB)
ACPI APIC Table: <HP     00000083>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  6
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <HP P51> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
0xfdef0000-0xfdefffff irq 25 at device 1.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:12:79:d8:a0:37
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
0xfdee0000-0xfdeeffff irq 26 at device 1.1 on pci3
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:12:79:d8:a0:36
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci4: <ACPI PCI bus> on pcib3
ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem
0xfdf80000-0xfdfbffff,0xfdff0000-0xfdff1fff irq 51 at device 3.0 on pci4
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci10: <ACPI PCI bus> on pcib6
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2000-0x201f irq
16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x2020-0x203f irq
19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x2040-0x205f irq
18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x2060-0x207f irq
16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib7
pci1: <display, VGA> at device 3.0 (no driver attached)
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x500-0x50f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem
0xee000-0xeffff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDROM <COMPAQ CD-ROM SN-124/N104> at ata0-master PIO4
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device 
da0: 135.168MB/s transfers
da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
da1 at ciss0 bus 0 target 1 lun 0
da1: <COMPAQ RAID 5  VOLUME OK> Fixed Direct Access SCSI-0 device 
da1: 135.168MB/s transfers
da1: 69455MB (142245120 512 byte sectors: 255H 32S/T 17432C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a

freebsd stable - Jun 2005 - Proliant 380 G4

Proliant 380 G4

Proliant 380 G4

Proliant 380 G4

Proliant 380 G4

Proliant 380 G4