Hi,
usually I hate replying to myself, but
this time it seems to be good news :-)
The describe behaviour (see below) is
no longer reproducable with the latest
5.4-STABLE as of today (8.5.2005, around
18:00 CEST).
So thanx to whoever fixed this ;-)
Regards,
Holger
On Sun, May 08, 2005 at 02:38:58PM +0200, Holger Kipp
wrote:> I have a very interesting behaviour here. During boot, I can use
> the keyboard (eg on the initial boot menu), but if I press a key
> after the message
>
> "Starting sshd"
>
> was printed (and before the login prompt), I get
>
> -----------------------
> Fatal trap 12: page fault while in kernel mode
> fault virtual address = 0xae
> fault code = supervisor read, page not present
> instruction pointer = 0x8:0xae
> stack pointer = 0x10:0xd41bdc94
> frame pointer = 0x10:0xd41bdcb0
> code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
> processor eflags = interrupt enabled, resume, IOPL = 0
> current process = 12 (irq1: atkbd0)
> trap number = 12
> panic: page fault
> Uptime: 21s
> Cannot dump. No dump device defined.
> Automatic reboot in 15 seconds - press a key on the console to abort
> --> Press a key on the console to reboot,
> --> or switch off the system now.
> -----------------------
>
> Anything stupid I have missed?
> Regards,
> Holger Kipp
>
> - - - - - - - - - - - - - - - - - - - - -
>
> dmesg is:
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.4-STABLE #5: Thu May 5 21:18:07 CEST 2005
> root@katrin.hkipp.de:/usr/obj/usr/src/sys/KATRIN
> ACPI APIC Table: <A M I OEMAPIC >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Duron(tm) (1300.06-MHz 686-class CPU)
> Origin = "AuthenticAMD" Id = 0x671 Stepping = 1
>
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> AMD Features=0xc0400000<AMIE,DSP,3DNow!>
> real memory = 536543232 (511 MB)
> avail memory = 515383296 (491 MB)
> ioapic0: Changing APIC ID to 1
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 0.3> irqs 0-23 on motherboard
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <A M I OEMRSDT> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <VIA KT880 host to PCI bridge> mem 0xe0000000-0xe3ffffff at
device 0.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> atapci0: <VIA 6420 SATA150 controller> port
0xd800-0xd8ff,0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07
irq 20 at device 15.0 on pci0
> ata2: channel #0 on atapci0
> ata3: channel #1 on atapci0
> atapci1: <VIA 8237 UDMA133 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
> ata0: channel #0 on atapci1
> ata1: channel #1 on atapci1
> uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at
device 16.0 on pci0
> usb0: <VIA 83C572 USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at
device 16.1 on pci0
> usb1: <VIA 83C572 USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at
device 16.2 on pci0
> usb2: <VIA 83C572 USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at
device 16.3 on pci0
> usb3: <VIA 83C572 USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 16.4 (no driver attached)
> isab0: <PCI-ISA bridge> at device 17.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <multimedia, audio> at device 17.5 (no driver attached)
> vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem
0xfebffc00-0xfebffcff irq 23 at device 18.0 on pci0
> miibus0: <MII bus> on vr0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> vr0: Ethernet address: 00:0b:6a:c0:00:ce
> acpi_button0: <Power Button> on acpi0
> fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6
drq 2 on acpi0
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7
drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: IEEE1284 device found /NIBBLE/ECP
> Probing for PnP devices on ppbus0:
> ppbus0: <HEWLETT-PACKARD DESKJET 640C> MLC,PCL,PML
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
> sio0: type 16550A
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
> ums0: 5 buttons and Z dir.
> uhub4: Cypress Semiconductor Slim Hub, class 9/0, rev 2.00/0.08, addr 2
> uhub4: 4 ports with 4 removable, self powered
> umass0: SMSC 223 USB97C223, rev 2.00/1.95, addr 3
> uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 4
> Timecounter "TSC" frequency 1300055309 Hz quality 800
> Timecounters tick every 10.000 msec
> ad0: 152627MB <SAMSUNG SP1614N/TM100-30> [310101/16/63] at
ata0-master UDMA100
> ad1: 76351MB <SAMSUNG SP0802N/TK100-24> [155127/16/63] at ata0-slave
UDMA100
> acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A102> at ata1-master UDMA33
> acd1: CDRW <HL-DT-ST RW/DVD GCC-4120B/2.01> at ata1-slave PIO4
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <HL-DT-ST DVDRAM GSA-4163B A102> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> cd1 at ata1 bus 0 target 1 lun 0
> cd1: <HL-DT-ST RW/DVD GCC-4120B 2.01> Removable CD-ROM SCSI-0 device
> cd1: 16.000MB/s transfers
> cd1: Attempt to query device size failed: NOT READY, Medium not present
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <SMSC 223 U HS-CF 1.95> Removable Direct Access SCSI-0 device
> da0: 1.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
> da1 at umass-sim0 bus 0 target 0 lun 1
> da1: <SMSC 223 U HS-MS 1.95> Removable Direct Access SCSI-0 device
> da1: 1.000MB/s transfers
> da1: Attempt to query device size failed: NOT READY, Medium not present
> da2 at umass-sim0 bus 0 target 0 lun 2
> da2: <SMSC 223 U HS-SM 1.95> Removable Direct Access SCSI-0 device
> da2: 1.000MB/s transfers
> da2: Attempt to query device size failed: NOT READY, Medium not present
> da3 at umass-sim0 bus 0 target 0 lun 3
> da3: <SMSC 223 U HS-SD/MMC 1.95> Removable Direct Access SCSI-0
device
> da3: 1.000MB/s transfers
> da3: Attempt to query device size failed: NOT READY, Medium not present
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:1): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:1): NOT READY asc:3a,0
> (da1:umass-sim0:0:0:1): Medium not present
> (da1:umass-sim0:0:0:1): Unretryable error
> Opened disk da1 -> 6
> (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:1): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:1): NOT READY asc:3a,0
> (da1:umass-sim0:0:0:1): Medium not present
> (da1:umass-sim0:0:0:1): Unretryable error
> Opened disk da1 -> 6
> (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:1): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:1): NOT READY asc:3a,0
> (da1:umass-sim0:0:0:1): Medium not present
> (da1:umass-sim0:0:0:1): Unretryable error
> Opened disk da1 -> 6
> (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
> (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (da2:umass-sim0:0:0:2): SCSI Status: Check Condition
> (da2:umass-sim0:0:0:2): NOT READY asc:3a,0
> (da2:umass-sim0:0:0:2): Medium not present
> (da2:umass-sim0:0:0:2): Unretryable error
> Opened disk da2 -> 6
> (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
> (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (da2:umass-sim0:0:0:2): SCSI Status: Check Condition
> (da2:umass-sim0:0:0:2): NOT READY asc:3a,0
> (da2:umass-sim0:0:0:2): Medium not present
> (da2:umass-sim0:0:0:2): Unretryable error
> Opened disk da2 -> 6
> (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
> (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (da2:umass-sim0:0:0:2): SCSI Status: Check Condition
> (da2:umass-sim0:0:0:2): NOT READY asc:3a,0
> (da2:umass-sim0:0:0:2): Medium not present
> (da2:umass-sim0:0:0:2): Unretryable error
> Opened disk da2 -> 6
> (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
> (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (da3:umass-sim0:0:0:3): SCSI Status: Check Condition
> (da3:umass-sim0:0:0:3): NOT READY asc:3a,0
> (da3:umass-sim0:0:0:3): Medium not present
> (da3:umass-sim0:0:0:3): Unretryable error
> Opened disk da3 -> 6
> (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
> (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (da3:umass-sim0:0:0:3): SCSI Status: Check Condition
> (da3:umass-sim0:0:0:3): NOT READY asc:3a,0
> (da3:umass-sim0:0:0:3): Medium not present
> (da3:umass-sim0:0:0:3): Unretryable error
> Opened disk da3 -> 6
> (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
> (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (da3:umass-sim0:0:0:3): SCSI Status: Check Condition
> (da3:umass-sim0:0:0:3): NOT READY asc:3a,0
> (da3:umass-sim0:0:0:3): Medium not present
> (da3:umass-sim0:0:0:3): Unretryable error
> Opened disk da3 -> 6
> Mounting root from ufs:/dev/ad0s1a
> WARNING: / was not properly dismounted
> WARNING: /tmp was not properly dismounted
> WARNING: /usr was not properly dismounted
> WARNING: /var was not properly dismounted
> WARNING: /mnt was not properly dismounted
> WARNING: /mnt/var was not properly dismounted
> WARNING: /mnt/tmp was not properly dismounted
> WARNING: /mnt/usr was not properly dismounted
> pcm0: <VIA VT8237> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0
> pcm0: <Unknown AC97 Codec (id = 0x434d4983)>
>
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"