thr3ads.net - freebsd stable - NEC uPD 720100 USB 2.0 controller () not working on FreeBSD 5.4-STABLE i386 (2005-04-23) [Apr 2005]

If this information is useful, please help other people find it:
Share via:

Raphael H. Becker

2005-Apr-23 17:04 UTC

NEC uPD 720100 USB 2.0 controller () not working on FreeBSD 5.4-STABLE i386 (2005-04-23)

Hello *,

The NEC uPD 720100 USB 2.0 controller doesn's seem to work. This
controller is  on a "Longshine LCS-8033H PCI USB Card"  and is a 
low cost "standard-USB2-controller" at my local electronics store.


root@beastie:~# dmesg | egrep "(^usb3|^uhub3)"
usb3: EHCI version 1.0
usb3: companion controllers, 3 ports each: usb1 usb2
usb3: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered


After trying some devices, the ports got disabled after some time:

uhub3: device problem (SET_ADDR_FAILED), disabling port 4
uhub3: device problem (SET_ADDR_FAILED), disabling port 3
uhub3: device problem (SET_ADDR_FAILED), disabling port 2
uhub3: device problem (SET_ADDR_FAILED), disabling port 1

I tried with a USB2-harddisk and a USB2-Memorystick, which work
perfectly (but just USB1) on the other ports or as USB2 on another host:

umass0: Acer Labs USB 2.0 Storage Device, rev 2.00/1.00, addr 2
umass0: LEXAR MEDIA JUMPDRIVE ELITE, rev 2.00/30.00, addr 2


lspci -vvv brings the following for the new card:

00:09.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
        Subsystem: NEC Corporation USB
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (250ns min, 10500ns max), cache line size 08
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at d7002000 (32-bit, non-prefetchable)
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
        Subsystem: NEC Corporation USB
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (250ns min, 10500ns max), cache line size 08
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at d7003000 (32-bit, non-prefetchable)
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
        Subsystem: Unknown device 0ee4:3383
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (4000ns min, 8500ns max), cache line size 08
        Interrupt: pin C routed to IRQ 10
        Region 0: Memory at d7004000 (32-bit, non-prefetchable)
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-



Subsystem: Unknown device 0ee4:3383 <-- seems to be the problem

# uname -a  
FreeBSD beastie.local.net 5.4-STABLE FreeBSD 5.4-STABLE #5: Sun Apr 24 01:23:03
CEST 2005 root@beastie.local.net:/usr/obj/usr/src_RELENG_5/sys/BEASTIE  i386

Any chances to get this card running?
Any (experimental) patches?


Regards
Raphael Becker

PS [1] http://tinyurl.com/arqlc (product description, german)
       http://tinyurl.com/8kseq (product description, english)

Gerrit Kühn

2005-Apr-24 00:01 UTC

head link

NEC uPD 720100 USB 2.0 controller () not working on FreeBSD 5.4-STABLE i386 (2005-04-23)

On Sun, Apr 24, 2005 at 02:04:29AM +0200, Raphael H. Becker wrote:
> The NEC uPD 720100 USB 2.0 controller doesn's seem to work. This
> controller is  on a "Longshine LCS-8033H PCI USB Card"  and is a 
> low cost "standard-USB2-controller" at my local electronics
store.
I wrote here about two weeks ago about the problems I'm having with a D-Link
DU-520 with the same chipset. However, mine seems to be working basically,
but chokes easily under load (more than ~2MB/s hang the connection and
produce lengthy timeouts).
> root@beastie:~# dmesg | egrep "(^usb3|^uhub3)"
> usb3: EHCI version 1.0
> usb3: companion controllers, 3 ports each: usb1 usb2
> usb3: <NEC uPD 720100 USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: 5 ports with 5 removable, self powered
Same here:

dmesg|grep NEC
ohci0: <NEC uPD 9210 USB controller> mem 0xdf025000-0xdf025fff irq 12 at
device 14.0 on pci0
usb2: <NEC uPD 9210 USB controller> on ohci0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
ohci1: <NEC uPD 9210 USB controller> mem 0xdf026000-0xdf026fff irq 11 at
device 14.1 on pci0
usb3: <NEC uPD 9210 USB controller> on ohci1
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xdf027000-0xdf0270ff irq
10
at device 14.2 on pci0
usb4: <NEC uPD 720100 USB 2.0 controller> on ehci0
uhub4: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: device problem (SET_ADDR_FAILED), disabling port 4
> uhub3: device problem (SET_ADDR_FAILED), disabling port 3
> uhub3: device problem (SET_ADDR_FAILED), disabling port 2
> uhub3: device problem (SET_ADDR_FAILED), disabling port 1
Hm, I have seen this behaviour earlier on my system, but it had nothing to
do with the chipset then. Instead ACPI was not doing the right thing and
routed IRQs in a way that was causing this problem. It went away after
disabling ACPI; perhaps you can give that a try, too?
> I tried with a USB2-harddisk and a USB2-Memorystick, which work
> perfectly (but just USB1) on the other ports or as USB2 on another host:
I have a Vosonic XS-Drive, which is basically an USB2-hd, too. See my
previous post for details.
> lspci -vvv brings the following for the new card:
lspci? I thought you were talking about FreeBSD, not Linux.

> # uname -a  
> FreeBSD beastie.local.net 5.4-STABLE FreeBSD 5.4-STABLE #5: Sun Apr 24
01:23:03 CEST 2005 root@beastie.local.net:/usr/obj/usr/src_RELENG_5/sys/BEASTIE 
i386
Well, slightly older here:

(%:~)- uname -a
FreeBSD stardust.terra.ger 5.4-PRERELEASE FreeBSD 5.4-PRERELEASE #23: Sat
Apr 16 16:19:21 CEST 2005
> Any chances to get this card running?
> Any (experimental) patches?
I'm still interested in using my card with >2MB/s and without those
hangs,
too. ;)


cu
  Gerrit
--

freebsd stable - Apr 2005 - NEC uPD 720100 USB 2.0 controller () not working on FreeBSD 5.4-STABLE i386 (2005-04-23)

NEC uPD 720100 USB 2.0 controller () not working on FreeBSD 5.4-STABLE i386 (2005-04-23)

NEC uPD 720100 USB 2.0 controller () not working on FreeBSD 5.4-STABLE i386 (2005-04-23)