thr3ads.net - freebsd stable - ACPI errors on boot [Mar 2005]

If this information is useful, please help other people find it:
Share via:

Dan Ponte

2005-Mar-12 06:07 UTC

ACPI errors on boot

Hi all.
I've been seeing lots of ACPI errors in my dmesg lately. They haven't
really affected functionality (yet!), but I'd like to see them resolved
nonetheless. I've googled all around, could not find a hint of a
solution. This machine is an ASUS CUSL2 motherboard with BIOS revision
1009. Below is my dmesg.
-------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #3: Wed Jan 12 16:34:03 EST 2005
    root@supermachine.danponte.net:/usr/obj/usr/src/sys/SUPERMACHINE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (753.53-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268349440 (255 MB)
avail memory = 252944384 (241 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS CUSL2> on motherboard
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
acpi0: Power Button (fixed)
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem
0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcm0: <AudioPCI ES1373-8> port 0xb800-0xb83f irq 9 at device 11.0 on pci2
pcm0: <TriTech TR28602 AC97 Codec>
pcm0: [GIANT-LOCKED]
dc0: <ADMtek AN985 10/100BaseTX> port 0xb400-0xb4ff mem
0xf1800000-0xf18003ff irq 9 at device 13.0 on pci2
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:0c:41:f0:7e:ce
dc0: if_start running deferred for Giant
dc0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port
0xa800-0xa80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xa400-0xa41f
irq 5 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xa000-0xa01f
irq 9 at device 31.4 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
umass0: SanDisk Corporation ImageMate CompactFlash USB, rev 1.10/0.09, addr 3
umass0: Get Max Lun not supported (STALLED)
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 753533594 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38166MB <WDC WD400BB-00DEA0/05.03E05> [77545/16/63] at ata0-master
UDMA100
ad1: 39205MB <Maxtor 6E040L0/NAR61590> [79656/16/63] at ata0-slave UDMA100
acd0: CDROM <CD-ROM Drive/G6D/M1.30> at ata1-master UDMA33
acd1: CDRW <PHILIPS CDRW4012P/P1.1> at ata1-slave UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <CD-ROM Drive/G6D 1.30> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <PHILIPS CDRW4012P P1.1> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk ImageMate II 1.30> Removable Direct Access SCSI-2 device 
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
Mounting root from ufs:/dev/ad0s2a
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
    ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
--------------
Thanks.
-Dan
-- 
Dan Ponte
http://www.theamigan.net/
You have the body of a 19 year old.  Please return it before it gets
wrinkled.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20050312/fa7dd643/attachment.bin

Doug White

2005-Mar-14 22:00 UTC

head link

ACPI errors on boot

On Sat, 12 Mar 2005, Dan Ponte wrote:
> I've been seeing lots of ACPI errors in my dmesg lately. They
haven't
> really affected functionality (yet!), but I'd like to see them resolved
> nonetheless. I've googled all around, could not find a hint of a
> solution. This machine is an ASUS CUSL2 motherboard with BIOS revision
> 1009. Below is my dmesg.
ASUS motherboards are known to have broken ACPI code so this isn't too
suprising.
>     ACPI-0252: *** Error: No object was returned from
[\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc15b8dc0), AE_NOT_EXIST
This appears to be trying to get resource information for uart #2 (sio1).
Since that port probes OK anyway its likely harmless.

If you want to try to clear these up, try a BIOS update first (if
available), then look for a replacement DSDT table. You can use the loader
options described in acpi(4) to load the fixed table.

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite@gumbysoft.com          |  www.FreeBSD.org

Michael L. Squires

2005-Mar-15 15:38 UTC

head link

ACPI errors on boot

On Sat, 12 Mar 2005, Dan Ponte wrote:
> Hi all.
> I've been seeing lots of ACPI errors in my dmesg lately. They
haven't
> FreeBSD 5.3-STABLE #3: Wed Jan 12 16:34:03 EST 2005
There were some changes to ACPI at about that time which caused 
motherboards with buggy BIOSes to have problems.  These were fixed, at 
least for me, pretty quickly.  See the freebsd-acpi mailing list for more 
details, but I'd suggest updating your kernel/world to something in March.

I am running 5.3-STABLE on a Supermicro P6DGH (nice board, but really 
weird - I20, many PCI slots, etc) and a Toshiba 8100 Tecra; the Tecra 
wouldn't boot at all while this problem existed.

Mike Squires
UN*X at home
since 1986

freebsd stable - Mar 2005 - ACPI errors on boot

ACPI errors on boot

ACPI errors on boot

ACPI errors on boot