Vinod Kashyap
2005-Jan-21 12:20 UTC
twa breakageonAMD64with9.1.5.23wareversionand2005-01-1103:00:49UTCRELENG_5 commit
Can anyone please verify if they see similar problems on i386 RELENG_4/4.11RC3? I have tested that 4.11RC3 works fine, but just want to make sure...> -----Original Message----- > From: owner-freebsd-stable@freebsd.org > [mailto:owner-freebsd-stable@freebsd.org]On Behalf Of Vinod Kashyap > Sent: Friday, January 21, 2005 11:23 AM > To: ksatechnologies@comcast.net; freebsd-stable@freebsd.org > Subject: RE: twa > breakageonAMD64with9.1.5.23wareversionand2005-01-1103:00:49UTCRELENG_5 > commit > > > > Let me know if the attached patch works for you too. > > > > -----Original Message----- > > From: owner-freebsd-stable@freebsd.org > > [mailto:owner-freebsd-stable@freebsd.org]On Behalf Of > > ksatechnologies@comcast.net > > Sent: Friday, January 21, 2005 8:36 AM > > To: freebsd-stable@freebsd.org > > Subject: twa breakage on > > AMD64with9.1.5.23wareversionand2005-01-1103:00:49UTC RELENG_5 commit > > > > > > I also have the same problem with the new 3ware drivers > > 9.1.5.2 in -STABLE but I am using the i386 platform with a > > Xeon 3.0Ghz processor. > > I have one RAID-1 array and one RAID-5 array on the 9500s > controller. > > /var and /usr/local on the RAID-5 > > > > Following the FreeBSD instructions to build -STABLE > > > > make -j8 buildworld > > make buildkernel KERNCONF="mykernelconf" > > make installkernel KERNCONF="mykernelconf" > > reboot > > > > And it worked. All was fine. Then.... > > > > mergemaster -p > > make installworld > > mergemaster > > reboot > > > > Then I could not get to the server via SSH. Found that the > > console had the exactly the same symptoms describe in the > > thread. I rebooted and at the Daemon Logo I did a "boot > > kernel.old" which worked with no problem. The dmesgs are > > below. First, 3Ware 9.1.5.2 driver "kernel" and the second > > is the "kernel.old" boot. > > > > --------------/etc/make.conf------------------------------------- > > # -- use.perl generated deltas -- # > > # Created: Thu Nov 25 08:12:18 2004 > > # Setting to use base perl from ports: > > PERL_VER=5.8.5 > > PERL_VERSION=5.8.5 > > PERL_ARCH=mach > > NOPERL=yo > > NO_PERL=yo > > NO_PERL_WRAPPER=yo > > CPUTYPE=p4 > > CFLAGS= -O2 -pipe -funroll-loops -ffast-math > > #CFLAGS= -pipe -funroll-loops -ffast-math > > COPTFLAGS= -O2 -pipe -funroll-loops -ffast-math > > > > > > ------------------Kernel With 3Ware 9.1.5.2-------------------- > > Copyright (c) 1992-2005 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, > > 1993, 1994 > > The Regents of the University of California. All > > rights reserved. > > FreeBSD 5.3-STABLE #0: Thu Jan 20 17:54:09 EST 2005 > > root@mail.barsproducts.com:/usr/obj/usr/src/sys/BarsMail > > ACPI APIC Table: <IntelR AWRDACPI> > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 > > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE > P,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SS > E2,SS,HTT,TM,PBE> > > Hyperthreading: 2 logical CPUs > > real memory = 1072562176 (1022 MB) > > avail memory = 1040035840 (991 MB) > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > > cpu0 (BSP): APIC ID: 0 > > cpu1 (AP): APIC ID: 1 > > ioapic0: Changing APIC ID to 4 > > ioapic0 <Version 2.0> irqs 0-23 on motherboard > > ioapic1 <Version 2.0> irqs 24-47 on motherboard > > npx0: [FAST] > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > acpi0: <IntelR AWRDACPI> on motherboard > > acpi0: Power Button (fixed) > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > > cpu0: <ACPI CPU> on acpi0 > > cpu1: <ACPI CPU> on acpi0 > > acpi_button0: <Power Button> on acpi0 > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > pci0: <ACPI PCI bus> on pcib0 > > pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > > pci1: <ACPI PCI bus> on pcib1 > > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> > > port 0xa000-0xa01f mem > > 0xf1000000-0xf101ffff,0xf1020000-0xf103ffff irq 18 at device > > 1.0 on pci1 > > em0: Ethernet address: 00:11:2f:5a:7e:df > > em0: Speed:N/A Duplex:N/A > > pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > > pci2: <ACPI PCI bus> on pcib2 > > 3ware device driver for 9000 series storage controllers, > > version: 2.50.02.011 > > twa0: <3ware 9000 series Storage Controller> port > > 0xb000-0xb0ff mem 0xf3000000-0xf37fffff,0xf3800000-0xf38000ff > > irq 27 at device 2.0 on pci2 > > twa0: 8 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047 > > twa0: [GIANT-LOCKED] > > uhci0: <UHCI (generic) USB controller> port 0xd400-0xd41f irq > > 16 at device 29.0 on pci0 > > uhci0: [GIANT-LOCKED] > > usb0: <UHCI (generic) USB controller> on uhci0 > > usb0: USB revision 1.0 > > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > uhci1: <UHCI (generic) USB controller> port 0xd000-0xd01f irq > > 19 at device 29.1 on pci0 > > uhci1: [GIANT-LOCKED] > > usb1: <UHCI (generic) USB controller> on uhci1 > > usb1: USB revision 1.0 > > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub1: 2 ports with 2 removable, self powered > > pci0: <base peripheral> at device 29.4 (no driver attached) > > pci0: <base peripheral, interrupt controller> at device 29.5 > > (no driver attached) > > pci0: <serial bus, USB> at device 29.7 (no driver attached) > > pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > > pci3: <ACPI PCI bus> on pcib3 > > pci3: <display, VGA> at device 4.0 (no driver attached) > > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> > > port 0xc400-0xc43f mem > > 0xf6020000-0xf603ffff,0xf6000000-0xf601ffff irq 16 at device > > 5.0 on pci3 > > em1: Ethernet address: 00:11:2f:5a:7e:e0 > > em1: Speed:N/A Duplex:N/A > > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel 6300ESB UDMA100 controller> port > > 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device > > 31.1 on pci0 > > ata0: channel #0 on atapci0 > > ata1: channel #1 on atapci0 > > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > > fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 > > drq 2 on acpi0 > > fdc0: [FAST] > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 > > flags 0x10 on acpi0 > > sio0: type 16550A > > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > > sio1: type 16550A > > ppc0: <ECP parallel printer port> port > > 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > ppc0: FIFO with 16/16/9 bytes threshold > > ppbus0: <Parallel port bus> on ppc0 > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > > kbd0 at atkbd0 > > atkbd0: [GIANT-LOCKED] > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: [GIANT-LOCKED] > > psm0: model IntelliMouse Explorer, device ID 4 > > orm0: <ISA Option ROMs> at iomem > > 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 > > pmtimer0 on isa0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > > 0xa0000-0xbffff on isa0 > > Timecounters tick every 1.000 msec > > acd0: CDROM <CD-224E/1.9A> at ata0-master UDMA33 > > SMP: AP CPU #1 Launched! > > > > -----------------Kernel.old pre 9.1.5.2 --------------------- > > Copyright (c) 1992-2004 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, > > 1993, 1994 > > The Regents of the University of California. All > > rights reserved. > > FreeBSD 5.3-STABLE #1: Mon Dec 27 10:27:38 EST 2004 > > root@:/usr/obj/usr/src/sys/BarsMail1 > > ACPI APIC Table: <IntelR AWRDACPI> > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 > > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE > P,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SS > E2,SS,HTT,TM,PBE> > > Hyperthreading: 2 logical CPUs > > real memory = 1072562176 (1022 MB) > > avail memory = 1044226048 (995 MB) > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > > cpu0 (BSP): APIC ID: 0 > > cpu1 (AP): APIC ID: 1 > > ioapic0: Changing APIC ID to 4 > > ioapic0 <Version 2.0> irqs 0-23 on motherboard > > ioapic1 <Version 2.0> irqs 24-47 on motherboard > > npx0: [FAST] > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > acpi0: <IntelR AWRDACPI> on motherboard > > acpi0: Power Button (fixed) > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > > cpu0: <ACPI CPU> on acpi0 > > cpu1: <ACPI CPU> on acpi0 > > acpi_button0: <Power Button> on acpi0 > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > pci0: <ACPI PCI bus> on pcib0 > > pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > > pci1: <ACPI PCI bus> on pcib1 > > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> > > port 0xa000-0xa01f mem > > 0xf1000000-0xf101ffff,0xf1020000-0xf103ffff irq 18 at device > > 1.0 on pci1 > > em0: Ethernet address: 00:11:2f:5a:7e:df > > em0: Speed:N/A Duplex:N/A > > pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > > pci2: <ACPI PCI bus> on pcib2 > > 3ware device driver for 9000 series storage controllers, > > version: 2.50.00.000 > > twa0: <3ware 9000 series Storage Controller> port > > 0xb000-0xb0ff mem 0xf3000000-0xf37fffff,0xf3800000-0xf38000ff > > irq 27 at device 2.0 on pci2 > > twa0: [GIANT-LOCKED] > > twa0: 8 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047 > > uhci0: <UHCI (generic) USB controller> port 0xd400-0xd41f irq > > 16 at device 29.0 on pci0 > > uhci0: [GIANT-LOCKED] > > usb0: <UHCI (generic) USB controller> on uhci0 > > usb0: USB revision 1.0 > > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > uhci1: <UHCI (generic) USB controller> port 0xd000-0xd01f irq > > 19 at device 29.1 on pci0 > > uhci1: [GIANT-LOCKED] > > usb1: <UHCI (generic) USB controller> on uhci1 > > usb1: USB revision 1.0 > > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub1: 2 ports with 2 removable, self powered > > pci0: <base peripheral> at device 29.4 (no driver attached) > > pci0: <base peripheral, interrupt controller> at device 29.5 > > (no driver attached) > > pci0: <serial bus, USB> at device 29.7 (no driver attached) > > pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > > pci3: <ACPI PCI bus> on pcib3 > > pci3: <display, VGA> at device 4.0 (no driver attached) > > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> > > port 0xc400-0xc43f mem > > 0xf6020000-0xf603ffff,0xf6000000-0xf601ffff irq 16 at device > > 5.0 on pci3 > > em1: Ethernet address: 00:11:2f:5a:7e:e0 > > em1: Speed:N/A Duplex:N/A > > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel 6300ESB UDMA100 controller> port > > 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device > > 31.1 on pci0 > > ata0: channel #0 on atapci0 > > ata1: channel #1 on atapci0 > > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > > fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 > > drq 2 on acpi0 > > fdc0: [FAST] > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 > > flags 0x10 on acpi0 > > sio0: type 16550A > > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > > sio1: type 16550A > > ppc0: <ECP parallel printer port> port > > 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > ppc0: FIFO with 16/16/9 bytes threshold > > ppbus0: <Parallel port bus> on ppc0 > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > > kbd0 at atkbd0 > > atkbd0: [GIANT-LOCKED] > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: [GIANT-LOCKED] > > psm0: model IntelliMouse Explorer, device ID 4 > > orm0: <ISA Option ROMs> at iomem > > 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 > > pmtimer0 on isa0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > > 0xa0000-0xbffff on isa0 > > Timecounters tick every 1.000 msec > > acd0: CDROM <CD-224E/1.9A> at ata0-master UDMA33 > > da0 at twa0 bus 0 target 0 lun 0 > > da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device > > da0: 100.000MB/s transfers > > da0: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C) > > da1 at twa0 bus 0 target 1 lun 0 > > da1: <3ware Logical Disk 01 1.00> Fixed Direct Access SCSI-0 device > > da1: 100.000MB/s transfers > > da1: 476816MB (976519168 512 byte sectors: 255H 63S/T 60785C) > > SMP: AP CPU #1 Launched! > > Mounting root from ufs:/dev/da0s1a > > em0: Link is up 10 Mbps Full Duplex > > em0: Link is Down > > em0: Link is up 1000 Mbps Full Duplex > > -------------------------------------------------------------- > > ------------------------------- > > > > Hope this information might help. > > > > Thanks, > > > > Kev > > _______________________________________________ > > freebsd-stable@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > > To unsubscribe, send any mail to > > "freebsd-stable-unsubscribe@freebsd.org" > > >