Nicolás de Bari Embriz García Rojas
2004-Nov-08 23:08 UTC
NVIDIA driver crashing the system
I am trying to use the nvidia driver from the ports on FreeBSD
5.3-STABLE but every time i startup X the system crash
My system:
Laptop: Dell latitud D800
video card: GeForce FX Go5200
I attached a console to the laptop and i got this:
---
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xbfc00000
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc06c4b39
stack pointer = 0x10:0xdea76a04
frame pointer = 0x10:0xdea76a10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 3
current process = 676 (Xorg)
trap number = 12
panic: page fault
Uptime: 1m39s
---
doing this:
nm -n /boot/kernel/kernel | grep 0xc06c4b39
I don get nothing
doing this: (omiting some digits)
nm -n /boot/kernel/kernel | grep 4b39
i get:
c04b3910 t bge_encap
This hapends when i try to X -xf86config /root/xorg.conf.new of startx
right now i am instaling XFree86-4 to see if i get the same error, any
ideas of how to fix this?
regards.
This is my kernel config:
---
# kernel for Dell Latidud D8000
machine i386
cpu I686_CPU
ident D800
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options COMPAT_LINUX
device acpi
device isa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device miibus # MII bus support
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires mii
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
# video
options SC_PIXEL_MODE
options VGA_WIDTH90
options VESA
# ipfilter
options IPFILTER
options IPFILTER_LOG
options IPFILTER_DEFAULT_BLOCK
options IPSTEALTH
# Using the ATAPI/CAM Driver CDBurner
device atapicam
# speaker
device speaker
---
This is my /bool/loader.conf:
ndis_load="YES"
if_ndis_load="YES"
snd_ich_load="YES"
ntfs_load="YES"
machdep.disable_mtrrs="1"
nvidia_load="YES"
hw.nvidia.registry.ReqAGPRate="1"
console="comconsole"
---
this is the output of dmesg:
---
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #4: Mon Nov 8 23:07:03 CST 2004
root@laptop.nbari.name:/usr/obj/usr/src/sys/D800
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.70GHz (1698.57-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACP
I,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 536535040 (511 MB)
avail memory = 511283200 (487 MB)
acpi0: <DELL CPi R > on motherboard
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xe7ffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce FX Go5200> mem
0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 11 at device
0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f
irq 11 at device 29.0 on
pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f
irq 11 at device 29.1 on
pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0, rev
1.10/2.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f
irq 11 at device 29.2 on
pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3001> mem
0xfaff0000-0xfaffffff irq 11
at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:0f:1f:25:d7:5e
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <1394 Open Host Controller Interface> mem
0xfafe8000-0xfafebfff,0xfafef800-0xfafeffff
irq 11 at device 1.2 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 32:4f:c0:00:2a:92:dc:a1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:92:dc:a1
fwe0: Ethernet address: 32:4f:c0:92:dc:a1
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <base peripheral> at device 1.3 (no driver attached)
ndis0: <Dell TrueMobile 1400 Dual Band WLAN Mini-PCI Card> mem
0xfafec000-0xfafedfff irq 5 at
device 3.0 on pci2
ndis0: NDIS API version: 5.0
ndis0: Ethernet address: 00:90:96:fa:4a:16
ndis0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 36Mbps 48Mbps 54Mbps
ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ndis0: 11g rates: 6Mbps 9Mbps 12Mbps 18Mbps 36Mbps 48Mbps 54Mbps
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f
7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem
0xf4fff400-0xf4fff4ff,0xf4ff
f800-0xf4fff9ff irq 5 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
speaker0: <PC speaker> port 0x67,0x65,0x63,0x61 on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7
drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1698566630 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cpu0: Performance states changed
ad0: 76319MB <HTS548080M9AT00/MG4OA53A> [155061/16/63] at ata0-master
UDMA100
acd0: CDRW <SONY CD-RW/DVD-ROM CRX830E/KDK3> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY CDRW/DVD CRX830E KDK3> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ndis0: link up
---
this is the output of scanpci -vv
---
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x3340
Intel Corp. 82855PM Processor to I/O Controller
STATUS 0x2090 COMMAND 0x0106
CLASS 0x06 0x00 0x00 REVISION 0x03
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00
BASE0 0xe0000008 addr 0xe0000000 MEM PREFETCHABLE
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x8086 device 0x3341
Intel Corp. 82855PM Processor to AGP Controller
STATUS 0x00a0 COMMAND 0x0107
CLASS 0x06 0x04 0x00 REVISION 0x03
HEADER 0x01 LATENCY 0x20
PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01
SECLT 0x20 SECSTATUS 0x22a0
IOBASE 0xc000 IOLIM 0xcfff
NOPREFETCH_MEMBASE 0xfc000000 MEMLIM 0xfdffffff
PREFETCH_MEMBASE 0xd0000000 MEMLIM 0xdfffffff
NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN NO_SERR_EN NO_PERR_EN
pci bus 0x0000 cardnum 0x1d function 0x00: vendor 0x8086 device 0x24c2
Intel Corp. 82801DB USB (Hub #1)
CardVendor 0x8086 card 0x4541 (Intel Corp., Card unknown)
STATUS 0x0280 COMMAND 0x0005
CLASS 0x0c 0x03 0x00 REVISION 0x01
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00
BASE4 0x0000bf81 addr 0x0000bf80 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b
pci bus 0x0000 cardnum 0x1d function 0x01: vendor 0x8086 device 0x24c4
Intel Corp. 82801DB USB (Hub #2)
CardVendor 0x8086 card 0x4541 (Intel Corp., Card unknown)
STATUS 0x0280 COMMAND 0x0005
CLASS 0x0c 0x03 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00
BASE4 0x0000bf41 addr 0x0000bf40 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x0b
pci bus 0x0000 cardnum 0x1d function 0x02: vendor 0x8086 device 0x24c7
Intel Corp. 82801DB USB (Hub #3)
CardVendor 0x8086 card 0x4541 (Intel Corp., Card unknown)
STATUS 0x0280 COMMAND 0x0005
CLASS 0x0c 0x03 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00
BASE4 0x0000bf21 addr 0x0000bf20 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x03 INT_LINE 0x0b
pci bus 0x0000 cardnum 0x1d function 0x07: vendor 0x8086 device 0x24cd
Intel Corp. 82801DB USB2
CardVendor 0x1028 card 0x014e (Dell Computer Corporation, Card unknown)
STATUS 0x0290 COMMAND 0x0106
CLASS 0x0c 0x03 0x20 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00
BASE0 0xf4fffc00 addr 0xf4fffc00 MEM
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x04 INT_LINE 0x0b
pci bus 0x0000 cardnum 0x1e function 0x00: vendor 0x8086 device 0x2448
Intel Corp. 82801BAM/CAM PCI Bridge
STATUS 0x8080 COMMAND 0x0107
CLASS 0x06 0x04 0x00 REVISION 0x81
HEADER 0x01 LATENCY 0x00
PRIBUS 0x00 SECBUS 0x02 SUBBUS 0x02
SECLT 0x20 SECSTATUS 0x2280
IOBASE 0xd000 IOLIM 0xefff
NOPREFETCH_MEMBASE 0xf6000000 MEMLIM 0xfbffffff
PREFETCH_MEMBASE 0xfff00000 MEMLIM 0x000fffff
NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT NO_VGA_EN ISA_EN NO_SERR_EN NO_PERR_EN
pci bus 0x0000 cardnum 0x1f function 0x00: vendor 0x8086 device 0x24cc
Intel Corp. 82801DBM LPC Interface Controller
STATUS 0x0280 COMMAND 0x010f
CLASS 0x06 0x01 0x00 REVISION 0x01
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00
BYTE_0 0x01 BYTE_1 0x08 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x1f function 0x01: vendor 0x8086 device 0x24ca
Intel Corp. 82801DBM Ultra ATA Storage Controller
CardVendor 0x8086 card 0x4541 (Intel Corp., Card unknown)
STATUS 0x0280 COMMAND 0x0005
CLASS 0x01 0x01 0x8a REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00
BASE0 0x000001f1 addr 0x000001f0 I/O
BASE1 0x000003f5 addr 0x000003f4 I/O
BASE2 0x00000171 addr 0x00000170 I/O
BASE3 0x00000375 addr 0x00000374 I/O
BASE4 0x0000bfa1 addr 0x0000bfa0 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0xff
BYTE_0 0x77 BYTE_1 0xe3 BYTE_2 0x77 BYTE_3 0xe3
pci bus 0x0000 cardnum 0x1f function 0x05: vendor 0x8086 device 0x24c5
Intel Corp. 82801DB AC'97 Audio Controller
CardVendor 0x1028 card 0x014e (Dell Computer Corporation, Card unknown)
STATUS 0x0290 COMMAND 0x0007
CLASS 0x04 0x01 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00
BASE0 0x0000b801 addr 0x0000b800 I/O
BASE1 0x0000bc41 addr 0x0000bc40 I/O
BASE2 0xf4fff800 addr 0xf4fff800 MEM
BASE3 0xf4fff400 addr 0xf4fff400 MEM
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x05
BYTE_0 0x09 BYTE_1 0x01 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x1f function 0x06: vendor 0x8086 device 0x24c6
Intel Corp. 82801DB AC'97 Modem Controller
CardVendor 0x14f1 card 0x5422 (Conexant, Card unknown)
STATUS 0x0290 COMMAND 0x0005
CLASS 0x07 0x03 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00
BASE0 0x0000b401 addr 0x0000b400 I/O
BASE1 0x0000b081 addr 0x0000b080 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x05
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x10de device 0x0324
nVidia Corporation GeForce FX Go5200
CardVendor 0x1028 card 0x019c (Dell Computer Corporation, Card unknown)
STATUS 0x02b0 COMMAND 0x0027
CLASS 0x03 0x00 0x00 REVISION 0xa1
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00
BASE0 0xfc000000 addr 0xfc000000 MEM
BASE1 0xd0000008 addr 0xd0000000 MEM PREFETCHABLE
BASEROM 0x80000000 addr 0x80000000 not-decode-enabled
MAX_LAT 0x01 MIN_GNT 0x05 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x28 BYTE_1 0x10 BYTE_2 0x9c BYTE_3 0x01
pci bus 0x0002 cardnum 0x00 function 0x00: vendor 0x14e4 device 0x165d
Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet
CardVendor 0x1028 card 0x865d (Dell Computer Corporation, Card unknown)
STATUS 0x02b0 COMMAND 0x0106
CLASS 0x02 0x00 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0x00000000faff0004 addr 0x00000000faff0000 MEM 64BIT
MAX_LAT 0x00 MIN_GNT 0x40 INT_PIN 0x01 INT_LINE 0x0b
pci bus 0x0002 cardnum 0x01 function 0x00: vendor 0x104c device 0xac47
Texas Instruments Device unknown
STATUS 0x0210 COMMAND 0x0007
CLASS 0x06 0x07 0x00 REVISION 0x01
BIST 0x00 HEADER 0x82 LATENCY 0x20 CACHE 0x08
BASE0 0xf6000000 addr 0xf6000000 MEM
BASE1 0x020000a0 addr 0x020000a0 MEM
BASE2 0x20040302 addr 0x20040300 MEM
BASE3 0xfffff000 addr 0xfffff000 MEM
BASE5 0xfffff000 addr 0xfffff000 MEM
MAX_LAT 0x07 MIN_GNT 0x40 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x28 BYTE_1 0x10 BYTE_2 0x4e BYTE_3 0x01
pci bus 0x0002 cardnum 0x01 function 0x01: vendor 0x104c device 0xac4a
Texas Instruments Device unknown
STATUS 0x0210 COMMAND 0x0107
CLASS 0x06 0x07 0x00 REVISION 0x01
BIST 0x00 HEADER 0x82 LATENCY 0x20 CACHE 0x08
BASE0 0xf6001000 addr 0xf6001000 MEM
BASE1 0x020000a0 addr 0x020000a0 MEM
BASE2 0x20060502 addr 0x20060500 MEM
BASE3 0xfffff000 addr 0xfffff000 MEM
BASE5 0xfffff000 addr 0xfffff000 MEM
BASE2 0x20040302 addr 0x20040300 MEM
BASE3 0xfffff000 addr 0xfffff000 MEM
BASE5 0xfffff000 addr 0xfffff000 MEM
MAX_LAT 0x07 MIN_GNT 0x40 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x28 BYTE_1 0x10 BYTE_2 0x4e BYTE_3 0x01
pci bus 0x0002 cardnum 0x01 function 0x01: vendor 0x104c device 0xac4a
Texas Instruments Device unknown
STATUS 0x0210 COMMAND 0x0107
CLASS 0x06 0x07 0x00 REVISION 0x01
BIST 0x00 HEADER 0x82 LATENCY 0x20 CACHE 0x08
BASE0 0xf6001000 addr 0xf6001000 MEM
BASE1 0x020000a0 addr 0x020000a0 MEM
BASE2 0x20060502 addr 0x20060500 MEM
BASE3 0xfffff000 addr 0xfffff000 MEM
BASE5 0xfffff000 addr 0xfffff000 MEM
MAX_LAT 0x07 MIN_GNT 0x40 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x28 BYTE_1 0x10 BYTE_2 0x4e BYTE_3 0x01
pci bus 0x0002 cardnum 0x01 function 0x02: vendor 0x104c device 0x802b
Texas Instruments Device unknown
CardVendor 0x1028 card 0x014e (Card unknown)
STATUS 0x0210 COMMAND 0x0146
CLASS 0x0c 0x00 0x10 REVISION 0x00
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE0 0xfafef800 addr 0xfafef800 MEM
BASE1 0xfafe8000 addr 0xfafe8000 MEM
MAX_LAT 0x04 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x0b
pci bus 0x0002 cardnum 0x01 function 0x03: vendor 0x104c device 0x8204
Texas Instruments Device unknown
CardVendor 0x1028 card 0x014e (Card unknown)
STATUS 0x0210 COMMAND 0x0101
CLASS 0x08 0x80 0x00 REVISION 0x00
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00
BASE0 0x0000ecf9 addr 0x0000ecf8 I/O
pci bus 0x0002 cardnum 0x03 function 0x00: vendor 0x14e4 device 0x4324
Broadcom Corporation Device unknown
CardVendor 0x1028 card 0x0003 (Card unknown)
STATUS 0x0000 COMMAND 0x0106
CLASS 0x02 0x80 0x00 REVISION 0x03
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00
BASE0 0xfafec000 addr 0xfafec000 MEM
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x05
BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0xc2 BYTE_3 0x07
--
Nicol?s de Bari Embriz Garc?a Rojas wrote:> I am trying to use the nvidia driver from the ports on FreeBSD > 5.3-STABLE but every time i startup X the system crash > > My system: > Laptop: Dell latitud D800 > video card: GeForce FX Go5200 > > I attached a console to the laptop and i got this: > > --- > NVRM: detected agp.ko, aborting NVIDIA AGP setup!This message means the Nvidia driver found the native AGP driver that comes with FreeBSD. I'd sugest removing "device agp" from your kernel and giving it a try. Remember to put nvidia_load="YES" in /boot/loader.conf. Another sugestion is not to use any kind of compiler optimization in /etc/make.conf. I've a FX5200 128MB and it worked fine with 5.3-STABLE from yesterday. -- Giovanni P. Tirloni
From: /usr/ports/x11/nvidia-driver/work/NVIDIA-FreeBSD-x86-1.0-6113/doc/README __________________________________________________________________________ (sec-05) CHOOSING THE AGP GART DRIVER __________________________________________________________________________ Similar to the NVIDIA Linux Driver Set, the user can decide if the NVIDIA driver should use its internal AGP GART driver or if it should rely on an OS provided AGP GART driver with the "NvAGP" XFree86 config file option: - Option "NvAGP" "0" Disable AGP - Option "NvAGP" "1" Use NVIDIA's AGP GART Driver - Option "NvAGP" "2" Use the OS AGP GART driver (agp.ko) - Option "NvAGP" "3" Attempt "2", fall back to "1" Unlike Linux, however, this option is not the only controlling factor at this point; for architectural reasons, the nvidia.ko kernel module must be built with exclusive support for NVIDIA's AGP GART driver or with support for FreeBSD's driver and NVIDIA's driver. By default, nvidia.ko is built with support for NVIDIA's internal driver, only; this can be changed (see nv-freebsd.h for details). Please note that if you built nvidia.ko with support for FreeBSD's driver it will not load unless agp.ko is loaded. agp.ko is special in that you can not load it after the system boot is complete, you need to append the following line to /boot/loader.conf to make sure it is pre-loaded: # -- load FreeBSD AGP GART driver -- # agp_load="YES" Also note that if agp.ko is loaded, it could conflict with NVIDIA's AGP GART driver (NvAGP), resulting in stability problems; for this reason, the NVIDIA driver will abort NvAGP initialization when it detects agp.ko. Note that current FreeBSD releases are shipped with agp.ko built into the kernel, which will need to be rebuilt without 'device agp'. Very recent -CURRENT kernels allow disabling agp.ko via device hints; if you're using such a kernel, adding the following to /boot/device.hints is sufficient: hint.agp.0.disabled="1" 0n Tue, Nov 09, 2004 at 01:08:14AM -0600, Nicol?s de Bari Embriz Garc?a Rojas wrote: I am trying to use the nvidia driver from the ports on FreeBSD 5.3-STABLE but every time i startup X the system crash My system: Laptop: Dell latitud D800 video card: GeForce FX Go5200 I attached a console to the laptop and i got this: --- NVRM: detected agp.ko, aborting NVIDIA AGP setup!